Invalide Approver: The beneficiary cannot approve or update the task.

Hi,
How are you daling with the error: Invalide Approver: The beneficiary cannot approve or update the task ?
I have some resources that can be requested by the approver, so when he's tried that, he got the error message below. I know the message and validation make sense and is necessary.
Thanks,
Renato.

Thanks Nitesh.
I've already done that but the validations persists. As xelsysadm, I've tryed to provision a resource to myself and I've got the same error message.
OIM is executing the sql SELECT rqu.usr_key FROM rqu WHERE req_key = 74. As the usr_key is equals to the task assignee... There is no query to get the resource authorizers.
The approval task is assigned to a user group.
Any suggestion about that?
My Solution: We decided for those users, We can do a direct provisioning (OIM Administrator) or have access policies without approval :-(
Thanks.
Renato.
Edited by: Renato.Guimaraes on 02/11/2009 07:53 - Use access policies or direct provisioning

Similar Messages

  • Schedule Approval of Updates

    I have WSUS 3.2.7600.226.
    Is there a way to schedule the approval of updates for a specific group?
    For example, I want certain updates approved at 10:30pm on a certain date for a specific computer group.
    Please let me know if this is possible and thanks for the help.

    Is there a way to schedule the approval of updates for a specific group?
    For example, I want certain updates approved at 10:30pm on a certain date for a specific computer group.
    No. You cannot schedule the *APPROVAL* of updates. Period. It is an interactive-only task.
    But, methinks it's not the approval that you're interested in scheduling, but rather the
    installation.
    So, with that presumption, let me offer this answer:
    It is NOT possible to schedule updates to install at half past the hour (with the WSUS native console); it is possible to schedule updates to install at the TOP of the hour.
    It is NOT possible to schedule installation by WSUS Target Group (with the WSUS native console).
    To schedule update installations to a specific group, use a GPO with the appropriate scheduled installation time and Security Group Filtering on that GPO to apply the GPO to the specific computer group (i.e. AD Security Group) of interest.
    However, it is worthy of note that my employer's Patch Manager product does allow the scheduling of approvals and installations with one-minute granularity, if
    approvals is really what you meant.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Invalid Credentials: The Network location cannot be reached

    I am working with MDT 2010, and I am getting the error, "Invalid Credentials:  The Network location cannot be reached." When I run the LiteTouch 64 bit, I don't think the network is working.  It's like there is not driver for the network card in
    the LiteTouch 64 bit to make the network connection.  When I hit F8 key, it brings a DOS box up for testing, and I found out these things.
     - I can ping the loop back address 127.0.0.1.
     - Cannot use the net use command to connect to the server share \\server01\DeploymentSahre$.
     - I can not ping by name or IP address the server that is holding my Deployment Share.
    This is the first time I am working with this technology, and I was following a guide off the Technet library.  It almost like I am missing the driver for the network card.  I have Windows Deployment installed on server01, the server will answer,
    and I am able to put in my user name and password,  it accepts and starts loading. 
    I did figure out how to inject the network drivers into Windows Deployment for the Motherboard I was using, do I have to do the same thing here again? MDT is using the Windows Deployment Images on the server01; MDT is setup on server01.   I would have
    thought that since the driver was already injected into the Image MDT would use that as well.  So, do I need to put a driver into the LiteTouch 64bit image and if I do how do I do that?
    thanks very much for your help,
    Rick Arnold
    ArnoldConsult
    Rick Arnold Arnoldconsult, MCP

    If you haven't updated the deployment share after adding the proper drivers to OOBD then your LiteTouch boot images will not have them included.  Just right click the deployment share and click on Update Deployment Share, it will take a while but it
    will rebuild the boot images with the drivers you've included in OOBD.  Then it's just a matter of either recreating the flash drives or loading the updated image into WDS.  
    Another thought:
    We had an issue with some HP's that had Main Boards replaced.  the BIOS time was WAY off and the UUID wasn't setting itself because the network was denying it access to our servers (because of the horribly wrong time).  Once we corrected the time
    in the BIOS everything ran fine.  The error we got while trying to do the deployment was the same as what you describe and we could still ping various machines on the network too.  

  • How to disable the edit Permission after the task approval in project server 2010.

    Hi ,
    Can this be done.
    How to disable the edit Permission after the task approval in project server 2010.
    I mean How to Disable approve/Reject Permission Once task approved in project server 2010.
    Any Help Would be more than Welcome.

    Hi Rohan,
    Just talking about the tool capabilities, preventing a task approver (status manager) to approve/reject updates once he has already approved once is not possible out-of-the-box. You grant permissions to user: if you grant a user to approve task updates then
    he has the permission to approve updates, no matter if it is the 2nd or 3rd time the task is approved or rejected.
    Then of course you could do not custom development to do that.
    I'd say that in order to help you, we would need to understand a little bit more your business need. Why do you need to achieve such a goal? We can surely propose you workaround.
    Hope this helps.
    Guillaume Rouyre - MBA, MCP, MCTS

  • Can not see the details of the task approved in UWL of ESS

    Leave approver can not see the detail of the task approved such as the start and end date of the leave, number of days used, leave quota details of the applicant when he approved it.
    Please give your advises!
    Regards,

    Hi!
    Maybe these attributes are not being shown due to the fact that they might have been specified in the "List of Display Attribute to exclude from Preview/Detail area" attribute of the UWL iview currently being used.
    As you can see in the Help page:
    http://help.sap.com/saphelp_nw70/helpdata/de/0a/ad68c125ae496f8c04a25090bd2e3c/content.htm
    It states the following about this attribute:
    "Enter the names of the attributes which you want to hide from the display in the preview area. These names should be comma separated."
    Maybe for the UWL iview currently being used it has been specified some values for this attribute, and so some information for the items such as the start and end date of the leave (along with the others you have mentioned) are not getting displayed in the preview area.
    Hope this helps!
    Best regards,
    Armando Zaro

  • I have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

    i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

    Itunes 11.1 is for your computer, not your iphone
    It is required in order to sync with ios 7.

  • I have an Apple iphone 4s and for the last 4 weeks I cannot download or update any apps. I have an iPad and a Mac book pro and the apps download on these devices fine. My phone tells me that I have 12 updates but when I press update all or update any indi

    I have an Apple iphone 4s and for the last 4 weeks I cannot download or update any apps. I have an iPad and a Mac book pro and the apps download on these devices fine. My phone tells me that I have 12 updates but when I press update all or update any individually nothing happens at all. It also does not ask me for my password any more but my iPad and mac book do.
    I have signed in and out of the app store and the password is correct. I have tried both kinds of reboot but that did nothing. I have tried to update the apps by connecting phone to Mac book pro...it shows the apps being download on the Mac book and says it will sync them to my phone but it does not. Everything else on my phone works fine.
    Any ideas ...Please!

    Thank you, this has resolved both the iphone and ipad problem immediately.  I am concerned that I may have a problem with apps that I bought under my old  AppleID as they will not be recognised.  Any suggestions for this please?

  • I can't upgrade from IOS 6.0.1 to IOS 7.1.1. iPad says it has downloaded IOS 7.0.3 but cannot verify the installation. Cannot restore or update in iTunes either. Help please?

    I can't upgrade from IOS 6.0.1 to IOS 7.1.1 on my iPad 2. iPad says it has downloaded IOS 7.0.3 but cannot verify the installation if I try and install it. It claims that I have lost internet connection, which I have not. I cannot restore or update the iPad in iTunes either, if I try to, I get an error message which says that I 'do not have permission to access the requested resource'. I am using the latest version of iTunes on Windows 8. I have tried putting the iPad in recovery mode and restoring it with iTunes, the result is the same.
    Any help would be much appreciated.
    Thanks!

    @Rudegar
    Thanks for the reply, but I've been having this problem for well over a week. If it is a corrupt download, is there some way of deleting it from the iPad and getting a new one?
    Thanks

  • I have downloaded Photoshop elements 5.0 to a new PC.  I recieve error message: "Your Adobe Photoshop Elements user name, organization, or serial number is missing or invalid. The application cannot continue and must now exit."

    I was referred here by customer service.  I have downloaded Photoshop elements 5.0 to a new PC.  After accepting the agreement I receive an error message saying  "Your Adobe Photoshop Elements user name, organization, or serial number is missing or invalid. The application cannot continue and must now exit."  There is no place to enter the serial number.

    All your pictures will remain safe even after uninstalling the program. Your pictures are saved to your system in form of catalog present at C:\ProgramData\Adobe\Photoshop Elements\Catalogs\<your catalog><br />When you reinstall the program you can open this catalog and view all your photos again.

  • I bought my ipad3 in the philppines, after 5months of usage my ipad3 is asking for an update "ios6". I updated it in japan because im working here. After updating i cannot install or update any apps

    I bought my ipad3 in the Philippines and have my settings, after 5months of usage my ipad3 is asking for an update "ios6". I updated it in japan because im working here. After updating i cannot install or update all my apps and whenever i try this statement appears "your account is not valid for use in the japanese store. You must switch to the philippine store before purchasing. What should i do? Do i need to come back to the phil store every time i update?

    Before when its still ios5 i can still download and enjoy apps even here in japan, but now after updating ios6 here, its stock, itunes store no more use from me.

  • HT4431 I just updated from my lion 10.7.5 to maverick and was told that my iPhoto 8.1.2 would be a free upgrade to the new iPhoto version?? but I cannot find an update ??

    I just updated from my lion 10.7.5 to maverick 10.9.1 and was told that my iPhoto 8.1.2 would be a free upgrade to the new iPhoto version?? but I cannot find an update ??

    Bad information
    Updates from previous ov iPhoto '11 are free - upgrades from older versions like iPhoto '08 are purchases - you can run your current version under Mavericks if you do not wish to upgrade
    LN

  • Need 2 metadata fields from item I am running a approval workflow on to show up on the task list

    I have document library "A" that contains many documents with 6 columns of metadata. I have a simple approval workflow for the library that works as it should in functionality. My users would like it if 2 fields of metadata from the items in library
    "A" would show up in the Task list so they could track the tasks by the 2 fields. Can anyone point me in the right direction here to make this happen? Working in SP2010 with Designer 2010 and IP 2010.
    Thanks 

    Hi Ross,
    According to your description, my understanding is that you want to display two managed metadata fields in the associated tasks created in the approval workflow.
    I recommend to edit the approval workflow in SharePoint Designer and new two task fields to display the two managed metadata fields.
    Here are the detailed steps:
    Open the approval workflow in SharePoint Designer and click Approval in Start Approval Process step.
    Click New to create two task form fields in single line of text type.
    Click Change the behavior of a single task under Customization.
    In Before a Task is Assigned step, select Set Task Field under Task Behavior Actions and then set the newly created task form fields to get the values in the managed metadata fields of current item.
    Please refer to the picture below(create a task form field called Managed Metadata for example and mm is the managed metadata column in the list):
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • OOTB approval worfklow not creating task when require checkout is set as Yes on the document library

    HI,
    I set the document library versioning to "require check-out" to yes.
    I set the workflow settings to create an approval workflow and "start the workflow when the item is created".
    I create a new document from the document template, save and check-in. The workflow task is not getting created, however the workflow is started.
    when i change the require check-out to "No" and create a new document as above, the workflow tasks are getting created.
    Can someone advise on what is the problem when versioning is enabled?? can anyone provide solution. thanks.

    Hi,
    According to your description, my understanding is that the task was not created after the approval workflow was running when setting the require check out to be yes.
    I tested the scenario in my environment, if I used the Office client application to create documents, then the task would not be created even when the workflow was running.
    There may be some reason that the creating task action is missed when the document is created using Office client application and the require check out is set to be yes.
    As a workaround, I recommend to install Office Web Apps and use Office Web Apps to create the documents when setting the require check out to be yes.
    The workflow will be starting before the documents is checked in, and it will create the task after the document is checked in.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • HT1414 itune cannot restore or update my ipad without the passcode. My kid forgot the passcode.

    There must be a way.  I cannot restore or update my 1st gen Ipad because it is locked with a passcode. help....

    Connect in recovery mode and restore, you'll get the option to reset the passcode during this process:
    iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.

  • Adding one more participant to approve the task in workflows

    Hi All,
    I'm having a requirement of adding the adding one more workflow user for approving the task. How to add one more workflow user in the human and allow him to approve the task which has been already approved by another workflow user, means it is hierarchical approval.
    First the task has been approved by assignee then finally the task has been approved by the approver who has admin rights.
    Regards,
    CH

    Hi,
    I have added the users but i need to approve the same task for twice then it is propagating the data to the other end. Is there any hierarchy that we have to
    define for the user inside human task.
    Everytime I'm approving the request for twice. How to approve the request for only one time.
    Regards,
    CH

Maybe you are looking for