Inventorize excise amounts in STO ( Stock Transport Order )

Dear experts,
            I am transferring a material from plant 1000 to 2000 via STO.Both plants are in same company code.
1) STO created
2)Delivery Created
3)Proforma Invoice
4)Excise invoice created in J1IIN
I created excise invoice as    Basic Price - 100
                                               BED(10%) -   10
                                               ECS (2%)   -     2
                                               HSE (1%)   -     1
My requirement is inventory account in Plant should get credited with 100 and Inventory account in Plant 2000 debit with 113(100102+1).Plant 1000 is excise able so plant creates excise invoice but plant 2000 is not excise able.In short i want to inventorize excise amounts in plant 2000.Please suggest.
Regards,
Abhijeet

hi abhijeet,
this is an intra plant stock tranfer for same company code.
here plant 1000 is excisable and 2000 is non excise.
normally plant 1000 has to give an excise invoice.
plant 2000 will not give an excise invoice because it is not registered under excise norms.
these excise amounts will be added to the value of the product and will be shown in an non excise plants.
balajia

Similar Messages

Excise Pricing procedure for Stock Transport Order in MM with TAXINN

I am an SD guy running STO from manufacturing plant to sales depot
AND not able to create JEX proforma excise invoice from NL
to TEST my configuration, I created excise invoice in J1IS with respect to goods issue from NL from UB means configuration is ok
BUT base amount in J1IS is coming as zero because of missing excise conditions in MM STO pricing procedure
CAN anybody give me a sample EXCISE pricing procedure for STO
AND do i need to create records for the condition types in FV11 OR MEK1 please clarify
I know that calculation type 362 attached to BASB in TAXINN has something to do with this
I am able to see chapter ID in J1IS
And the relation between condition types in TAXINN and excise pricing procedure for STO
And I am able to create excise invoice in J1IG with zero excise values
I also maintained pricing procedure determination for JEX in OVKK that is document pricing procedure N pricing procedure JINSTOCK
I think my explanation is sufficient enough
please give A sample of TAXINN

Hi Yoga,
Here u not need to do VL10b.just follow this steps and try.
In PO,Document type is UB and Item Category is U.
After creating PO,In MB!B with reference that PO number and using movt type 541
then u can see that stock in Transit.Now u do GR with respect to PO number.
Thanks & Regards
Suresh.
> Hello MM Gurus,
>
> I am doing Stock transport order between 2 plants
> under same company code.
> I have maintained all the required settings.Following
> is the process flow.
>
> 1.Creation of Purchase order with document type
> UB.(ME21N)
> 2.Creation of outbound delivery with respect to
> Purchase order.(VL10B)
> 3.Post Goods Issue from the supplying plant. (VL02N)
> 4.Creation of Excise Invoice in supplying plant.
> (J1IS)
> 5.Goods receipt at the receiving plant.(MIGO)
>
> While I am doing Goods receipt in the receiving
> plant, system is giving an error
> message "Maintain Vendor for the Excise Invoice" -
> Message no. 4F185.
> Why this message is coming and how to resolve this?
>
> Thanks & Regards
> Yoga

Problem in creation of STO(stock transport order)

hi all SAP gurus,
i am facing the problem in creation of stock transport order with ME21N code. i m getting the error msg of "Not possible to determine shipping data for material in STO "
i have checked the stock transport order setup in customization. but not getting the clear idea to come out from this problem.
if anybody have the idea of " how to do the customization of stock transport order setup, pls. let me explain.
thnx in advance.
rgrds,
rajesh

Hi Rajesh,
when ur creating STO with UB doc type, then you have to maintain material in both the plants.
Regarding the error which is comming for you, you have to check the settings at
SPRO- IMG- MM-Purchasing-Set up stock transport order- Assign delivery type & Checking rule
here for document type UB and your supplying plant-XXXX select nothing for Dlv type(delivery type) and chr - 01 and after this save.
After this you create STO as you are doing and see what the system is prompting.
For any further clarification let me know.
Regards,
NJ

HELP for all 5 TYPES of STO Stock Transport Orders with detailed scenario

PLEASE help me understanding the detailed scenarios for all 5 TYPES of STO s
as in my day to day job activities , i frequently handles issues related to STO s
PLEASE HELP WITH DETAILED STEP BY STEP SCENARIOS

Hi Jagatram,
Standard SAP has the following methods For Stock transport order:
1) One Step Transfer stock without using purchasing documents; Use movement type 301.
2) Two Step Transfer stock without using purchasing documents; Use movement type 303 in Supplying plant and movement type 305 in receiving plant.
3) Using Standard Transport Order (STO) without delivery in two steps. STO created in T-Code ME27, receiving plant posts goods issue (for returns), movement type 351 and supplying plant post goods receipt from using movement type 101.
4) Using Standard Transport Order (STO) with delivery in one step. STO created in T-Code ME27, Receiving plant creates shipment and Goods issue document (for materials to be returned) with movement type 647 and goods receipt document with movement type 101 both created in one step.
5) Using Standard Transport Order (STO) with delivery in two steps. STO created in T-Code ME27, Receiving plant creates shipment and Goods issue posted (for materials to be returned) with movement type 641.Goods receipt is posted in the supplying plant, movement type 101.
6) Using Transportation scheduling agreement (TSA) with delivery in two steps. TSA created in T-Code ME37. Receiving plant creates shipment and Goods issue document (for materials to be returned) with movement type 641. Goods receipt is posted in the supplying plant, movement type 101.
To achieve it, necessary configurations has to be done in Tcode- OMGN.
SPRO>> Materials management>> Purchasing>> Purchase Order>> Set up Stock transport Order:
1. Plant: For the receiving plant, maintain customer No-Plant (If using STO with delivery), for the Sales Org, Dist channel and Division.
2. Checking Rule: Create checking rule.
3. Define checking rule : Usually no change required here.
4. Assign delivery type/checking rule: Assign the document type(UB) - Supplying plant- Delivery type(NL).
5. Purchasing document type: Maintain the supplying plant- Receiving plant relationships for the doc type-UB, either 1-step or 2-step, as per business.
Hope this helps!
Regards,
Shilpa

STO (stock transport Order) posting: ATP and inventory impact

Dear All.
ATP configuration "OVZ9" gives you one checkbox to include or exclude purchase orders from ATP. "Incl.purchase orders".
In general we do want to include these for ATP, but this also includes STO documents. In some cases we do not wan to include the STO.
Is there a way to not include the inbound STO as a receipt in ATP for a plant, but include purchase orders?
If not through ATP configuration, then possibly through the document setup or posting? Wondering if we make a copy of the UB to a ZB and can exclude ZB from ATP or have it post to blocked stock or some other way so this type of STO does not impact ATP?
Many thanks!

That's a good idea. Thank you.
If it works we could post the STO's we want to exclude to a different storage location. We'll check and see if this excludes the receipts from ATP.

KE24 no shipping point for STO(Stock Transport Order)

Dear All:
When I run KE24(account based), I found some of the data without "shipping point" value. Most of these records are from STO orders.
May I ask if there is any solution for this issue?
Thanks and Best Regards,
Harrison

Hi, This situation in ONLYfor STO orders.
For other orders, it is normal.
Therefore, I do NOT think this is because COPA fields are NOT maintained.
Thanks for your reply
Harrison

Stock Transport Order Pricing Procedure

Dear Experts,
Please let me know the opssibility to configure pricing procedure for STO (Stock Transport order between two plants of same Company code..
Pls explain in detail

Hi,
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condiiton type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight/delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08

Excise Duty handling for Inter company Stock Transport Orders in SAP 4.6C

I want to handle Excise Duty handling for Inter company Stock Transport Orders in SAP 4.6C. I know that SAP has provided standard solutions in 4.7C by giving one standard table OIH09 which can be maintained through Customisation.
In 4.6C, even the Goods issue & Goods receipt button in item details of Stock Transport order is not available.
Is there any work around for the same.

In IS-OIL, cross company postings were stopped with Note # 623910 & would
require a core modification to achieve this functionality.

Stock Transport Order (STO)will not create delivery

I have created a intercompany Stock Transport Order (STO) and it has created the shipping tab in the Purchase order(PO), and all seems to be correct.
I have material in the plant, yet when I go to create the delivery using VL10G, the PO does not show as a choice. I also do not get an error, so I cannot tell why it is not creating the delivery.
Is there a way to see an anaylis of why the STO is not showing as a choice?
Thanks,

Hi,
Please check the delivery date in the STO created.and adjust the del creation date etc input fields at VL10G and try the posting.If there exists no error in the po created.

Stock transport order (STO) financial documents

Hi
Can any one post the financial documents of a stock transport order process between two different company codes( Both one step and two step process with delivery and billing document).

Hi,
Please check the delivery date in the STO created.and adjust the del creation date etc input fields at VL10G and try the posting.If there exists no error in the po created.

Proforma Invoice & Excise Invoice in Stock Transport Order

Hi,
What is the business logic for creating a Proforma Invoice & Excise Invoice in Stock Transport Order?
My apologies for putting down the basis question before you.
Regards,
PK

Hi
1. In VF01 from where the net price will come.
you have to maintain in VK11
2. On what value basis, the excise is going to be calculated in J1IIN.
It will calculate on your condition of excise in VK11 and value of VF01
3. What are FI entries in VF01 & J1IIN in the case of Stock Transfer.
check with SD consultant he will clear you
Regards
Kailas Ugale

Proforma Invoice (F8) for Stock Transport Order

With regard to intra-company STO, we have a specific requirement:
Referencing delivery document generated using Xn: VL10B (delivery from Stock Transport Order), we create proforma invoice type F8. Subsequently, excise invoice is created referencing the proforma invoice.We need to capture the material cost plus 10 % of material cost as PR00 value in the invoice.
Problem:
However, here comes the problem: condition type PR00 does not come automaticcally in the proforma invoice, though pricing procedure has PR00 condition type. We have to manually entere the PR00 condition type for every line item (a routine calculates 110% of the value once value is enetered in the manually entered condition)
Is it the standard system behaviour ? Any way out?
with kind regards
Muraleedharan.R

Hi,
Have you maintained the condition records for PR00 , if not than you have to enter it manually at the item level .
If your price is same for all the items than maintain use header condition or else at item level you have to enter PR00 item by item.
Regards,
Krishna O

Intra Company Stock Transport Order

Hi,
This is a scenario of Intra Company Stock Transfer (using Stock Transport Order with document type UB) from one manufacturing plant to another manufacturing plant within the same company code.
I have created STO, prepared Outbound Delivery with T-Code VL10B and did PGI. Billing was done with T-code VF01 and Outbound Excise Invoice was created with T-Code J1IIN
While doing Goods Receipt in the Receiving plant with the T-code MIGO, when I referred the outbound excise invoice that was created in the previous step with the T-code J1IIN (put Excise Invoice No. and Date), I got the following error message "Excise invoice doesn't exist in the supplying plant" and not any Excise Value is flowing from the Excise Invoice in the screen of MIGO.
The CIN configuration and master data in J1ID seems to be ok.
Please provide the expert opinions to overcome the issue.
Thanks in advance
Rajesh Praveen

I did Goods Receipt with reference to Outbound Delivery in the Receiving Plant without referring any Excise Invoice Number (as our system has been designed now like this). I updated part RG23A part 1 using the material document number (generated as a result of Goods Receipt) in J1I5.
Now I am trying to post RG23A part 2 in J1IEX with reference to the material document number (generated as a result of Goods Receipt) and putting the Excise Number created in J1IIN earlier. The system is picking BED, ECS and SECess values but the value of Base Value is not being picked up as a result of which I am not able to post the Excise Invoice.
Please provide some idea to resolve this
Thanks in advance

Stock transport order between storage locations and assignment category type E not in MRP

Hello Gurus,
I have a stock transport order between 2 storage location which belongs to the same plant. Besides the stock transport order is allocated to a sales order (account assigment category E). When I run the MD03, the system take into account the quantity of the stock transport order as a future entry and this is wrong. I need that the MRP has not into account the stock transport order as an entry.
As an important information, If I modify the stock transport order removing the account asignment category E (sales order), then the MRP doesn't take into account it, so this is correct.
Could anybody tell me how to get it?
Thanks in advanced.

Laura,
It is normal that MRP will consider an STO as a receipt element; this is basic planning. It is unclear to me why you think you do not want it to do so, but I will assume you have some logical reason.
Contrary to what some others may have suggested, changing the scope of check for availability checking has no effect on which elements are considered for MRP. MRP is a completely separate functionality from Availability Check.
For Location > Location STOs (within a plant), then, you normally have the receipt element of the STO in the destination storage location, and the requirements element of an equal amount in the source storage location. Net of these two elements is zero, unless you have already issued the STO at the source location.
Changing the Account assignment from "E" means that the STO will not be relevant for your Sales order (in other words, when you receive this STO into the destination storage location, it cannot be used for your sales order). In a general MTO scenario, it also means that the proceeds of this STO (the stock you received) cannot be used for ANY sales orders.
One way that some people make an STO 'not relevant' for MRP is to alter the destination storage location such that it is not relevant for MRP. You can change the MRP relevancy of the storage location in MM02 > MRP4 tab
Best Regards,
DB49

Procurement cycle in third party order and stock transport order.

please provide me in steps the procurement cycle in third party order and stock transport order.

Hi,
STO Process: -
1.Create a vendor for the company code of receiving plant, using account group :0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In Pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings , Create the STO using T-Code:ME21N and maintain pricing conditions of freight and Save.
11. Create Delivery :VL10G
Click on the Background Button after selecting line item
A message is flashed : See log for information> next Click on Log for delivery creation Button >click on line item>click on document button to get Delivery document No
12. Picking, PGI:VL02N
13. Billing:VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Pricing configuration for STO: -
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight / delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08 and also assign the Accrual Key to this and do the Account Determination for this Accrual Key in OBYC
At the time of PGI, following accounting entry will get generated;
Stock A/c - Dr - 110 INR (Receiving Plant)
Stock A/c - Cr - 100 INR (Supplying Plant)
Freight Clearing A/c - Cr - 10 INR (Supplying Plant)
Third Party Process Flow: -
1) MM01 - General Item category Group should be BANS in basic view of material master.
2) VA01 - Creation of sales order with VA01 transaction in SD module
3) When sales order is created system automatically creates a PR for the material with item category as "S"--> Third Party Item
4) ME21N - Directly PO with item category as "S" and delivery address as customer address
5) MIGO - Statistical GR by MM ( When it is made goods are received and delivered)
6) MIRO - Invoice by MM for vendor
7) VF01 - Billing by SD on Customers

Inventorize excise amounts in STO ( Stock Transport Order )

Similar Messages

Maybe you are looking for