Inventory 0IC_C03 Cube Transformations issue BI 7

Hi Experts,
we are Installing Inventory Cube 0IC_C03, with In dataflow options in BI 7, 2LIS_03_BF transformtions is in Active State, while 2LIS_03_BX transformtion and 2LIS_03_UM transformtions are in Active.
and for most of the Keyfields in Cube are not mapped with infosource fields.
can any body implemented Inventory in BI 7 system, any body faced this issue. can you please share how you resolved this issue.
we are on BI Content 703 11 version.
Regards,
Raj

Raj,
No need to check start routine code for this.
Goto Transformation --> Change mode --> Choose Rule Group (on top of window, middle of the screen) --> Choose 05 --> Dispay mapping --> check routines available or not.
Confirm back are you able to see filed routine or not...!!
Check doc:  [Rule Groups in Transformation|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90754b76-bcf1-2a10-3ba7-b299b2be09f2]

Similar Messages

  • Inventory 0IC_C03 Backward caluculation issue

    Hi experts,
    In Inventory reportm custom query, Kaydate with 365 days offset is used, there data is showing correct with Initialization date and future date. problem is for historical date some time negative and postive values are showing but mot matching with SAP ECC stock on date at MB5B.
    here is the example.
    Stock initialization on April 10 2009.
    for data on feb 01 2007, stock on ECC is 1500
    issues -   100 -  KG
    recepits    2300 KG
    when sum of these is 2200 kg, on BI side for 01 2007 for material and plant it is showing - 2200 KG.
    but it show as 1500 KG.
    *from initialization to date on which query is run, all the receipts and issues sum is showing in report)
    is this the behaviour or Bi report will show exactly same qunatity as in ECC for historical date*
    Thanks in advance
    Edited by: Pavankbi on May 20, 2009 6:32 AM

    Raj,
    No need to check start routine code for this.
    Goto Transformation --> Change mode --> Choose Rule Group (on top of window, middle of the screen) --> Choose 05 --> Dispay mapping --> check routines available or not.
    Confirm back are you able to see filed routine or not...!!
    Check doc:  [Rule Groups in Transformation|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90754b76-bcf1-2a10-3ba7-b299b2be09f2]

  • Queires on Non-Cumulative Inventory Management Cube 0IC_C03 Not Working

    Hello all.
    I am trying to use the 0IC_C03 Inventory Management cube with non-cumulative key figures.  I followed the How to...Handle Inventory Management Scenarios in BW paper to a tee.
    Steps I followed:
    1.  Ran initialization of beginning balance with 2LIS_03_BX
    2.  Ran the historical job with 2LIS_03_BF
    3.  Uploaded to BW the Initialization (BX) and compressed without setting the "No Marker Update" flag
    4.  Uploaded the historical movements (BF) and compressed setting the "No Marker Update" flag
    Now, to this point, everything was fine.  Quantities were as expected.  Dollar values were as expected.  The problem occurs once I load deltas:
    5.  Loaded delta for 2LIS_03_BF and compressed without setting the "No Marker Update" flag as instructed in the How To... paper
    Query example:
    MATERIALA: 
    Initial Stock Balance = 1000 EA
    Delta had stock issue of 150 EA (so the stock balance should have decreased from 1000 to 850)
    Now, I have the record in BW showing the stock issue of 150.  However, the non-cumulative key figure within the query still shows 1000.  And when I drill down by calendar day, I would expect the result to show 850, but it seems to add the 150 before taking it away resulting in 1000 which is actually the initial stock balance.  It is like it is not recognizing the updates.
    Any help would be appreciated.
    Thanks,
    Brent

    Hi!
    Here is what helped in my case, very similar to your:
    In DTP for 2lis_03_bx (not only in infopackage, as it is said in manual!) you have to change "Extraction Mode" parameter to "Initial Non-cumulative for Non-cumulative values"

  • Missing content for inventory management (cube 0IC_C03)

    Hi everybody,
    I installed the following BI content for inventory management: Cube 0IC_C03, InfoSource 2LIS_03_BX and transfer rules from data source 2LIS_03_BX to info source 2LIS_03_BX. However, I'm not able to the update rule from info source 2LIS_03_BX to info cube 0IC_C03. I can only find the old update rule 0IC_C032LIS_40_S278 -> 0IC_C03.
    I also couldn't find the update rule for material movements from 2LIS_03_BF to infocube 0IC_C03.
    How can I find this missing content. We are using BI Content Release 704 Level 1.
    Thanks for your help!
    Thomas

    Hi Oscar,
    unfortunately, I was not able to find a transformation for the datasource migrated to 7.0.
    Btw, how do I determine to which version data sources are replicated. I have an underlying ECC6.0 system. When I replicate all data sources for that source system, datasources automatically show up as 7.0. I'm missing the pop-up question whether or not I want to replicate as 3.5 or 7.0.
    Thanks in advance!
    Thomas

  • When running a query of a 0IC_C03 cube copy inventory shows as blank

    When loading the 0IC_C03 cube copy ZMM_C01 Cube: Material Stocks/Movements, if there
    is no movements for that day in a plant the inventory values do not show when we run a query on that key date
    When we create a movement type and run the extraction then the ending inventory values
    will show when we run a query usig that key date.
    So if there are no movements types for a plant  then the inventory balance does not show up in our query reports. Once we post a
    movement type for a plant and extract data then rerun our reports then the inventory balances show up.

    Refer link
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30f15839-0cf1-2b10-c6a7-ebe68cc87cdc?QuickLink=index&overridelayout=true
    & check ur e-mail.

  • Inventory Management Cube 0ic_c03, 0StockType

    In the Inventory Management Cube 0ic_c03 queries,I've found that  0StockType has descriptions that are misleading because of the way they are written in domain bstaus (R3 side), especially when seeing the key and SHORT description (truncated beyond meaning).
    OK I can correct these by changing BStaus 's texts.
    The main changes I'd do are for the Customer Consigment, Customer Return Packaging and Material Provided to Vendor descriptions.
    But what does 0StockType 'blank' (or #) mean ?
    (It seems to mean something like Valuated Stock Valuation and 'Not Defined' is not very good in a Query result)

    Well, no one replied, but I got feedback from OSS.  So just in case anyone is interested.....
    I had to use r3 > se11 to change the domain descriptions myself.
    Bstaus 'blank' I put as 'Valuation'
    I also improved some of the Bsttyp descriptions whilst there

  • Inventory analysis Cube 0IC_C03

    Hi Experts,
    I am unable to work with 0IC_C03 cube in BI 7.0. I didn't find
    standard transformations for this cube.
    Please let me know the data flow for  0IC_C03 cube in BI 7.0.
    Advanced Thanks,
    Chandra

    Please check this out.
    http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
    You can install three Transformations from Business Content corresponding to the following three DataSources:
            2LIS_03_BX
            2LIS_03_BF
            2LIS_03_UM

  • 0IC_C03 info cube loading issue

    Hi,
    While loading the 0IC_C03 (Inventory) info cube from 2LIS_03_BF
    extractor job is taking long time, even while loading upto PSA and also
    while loading the data from PSA to info cube through DTP.
    When i checked the same with other two extractors it was working fine
    i.e., 2LIS_03_BX and 2LIS_03_UM. I have checked in the process monitor
    in SM50 in BI it was showing ACTION: Direct Read TABLE: NRIV.
    Regards,
    Prabhakar.

    Ouuupsss, you must be on the interval definition.
    Execute the SNRO transaction
    Enter your number range ID
    Modify the definition of your number range (the pen )
    Menu Goto
    Buffer
    Memory
    Then there is a new field that that should be displayed. Something like "Buffer size". 500 is a good start (not too small, not too big).
    Regards,
    Fred

  • Inventory onhand cube

    Hi Gurus,
    the Business requirement for us is to give the users a Onhand report on a monthly basis, my question to you guys is
    Instead of building a Onhand cube at month level can I build a cube at the daily level and build an aggregate on top of the cube at monthly level and have a report on it? Just thinking about the future if they ask inventory onhand report at the daily level.
    I know it is little different in case of inventory cube and how it works because of the validity table and the performance issues
    if we have at daily level? Is it possible please through some input on this.
    Thanks
    Jay.

    Hi,
    Use 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM to 0IC_C03 Cube and design the report.
    You can do it by using 0IC_C03 InfoCube, see the report design steps and keyfigures used.
    Use :
    0VALSTCKVAL   " for Value
    0VALSTCKQTY   " for Qty
    0CALMONTH        " for Month
    Use the above combinations in New Selections in columns and go it.
    For Qty Opening:
    New Selection bad drag abd drop following things
    0VALSTCKQTY   " for Qty
    0CALMONTH        " for Month and restrict with less then or equalto option variable (single value, user input)  and set the offeset
                                   value = -1 bcoz if user will give 12.2009 , so it will display 11.2009 closing stock, this is opening for 12.2009.
    For Qty Closing:
    New Selection bad drag abd drop following things
    0VALSTCKQTY   " for Qty
    0CALMONTH        " for Month and restrict with less then or equalto option variable (single value, user input) .
    In the same way build for Value and other Keyfigures on 0IC_C03.
    And
    Drag & drop
    0MATERAIL
    0PLANT  " Give some Input Variable.
    See the steps.
    Treatment of historical full loads with Inventory cube
    Setting up material movement/inventory with limit locking time
    If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
    Thanks
    Reddy

  • InvMgt Cube-load issues - stock movmts has not happened - how to delete

    Hi,
    For few Materials in R/3, current stock is Zero.
    But for the sam Material ,in BW, the Stock is available. loads has happened from 2008. Then the Materials stock is initialised.
    After that movements were loaded but, it never zeroed the TotalStock for that Material till now.
    And in R/3 the Stock is zero for that material currently.
    ( As u will be knowing the cube has non-cumulative KF, which takes inflow:Reciot Qty & outFlow:Issue Qty(based on Stock Movement, the non-cumlative KF holds the last value)
    There are no R/3 records for the material in Tcode MB51( no stock movement for the year 2008 is available).
    How to resolve this issue, would anyone guide me please , as this isssue is in Production now.
    there are many Materials like the same way. How to get the latest Stock ie.0 to all these records.
    please guide me.
    Thanks in Advance!.

    Hi,
    Use 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM to 0IC_C03 Cube and design the report.
    Use :See the steps how to load the data to 0IC_C03.
    Treatment of historical full loads with Inventory cube
    Setting up material movement/inventory with limit locking time
    If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
    0VALSTCKVAL      " For Value
    0VALSTCKQTY      " For Qty
    0CALMONTH        " For Month
    Use the above combinations in New Selections in columns and go it.
    For Qty Opening:
    New Selection, drag and drop following InfoObjects
    0VALSTCKQTY     " For Qty
    0CALMONTH       " For Month and restrict with less then or equalto option variable (single value, user input)  and set the offeset
                    " value = -1 bcoz if user will give 12.2009 , so it will display 11.2009 closing stock, this is opening for 12.2009.
    For Qty Closing:
    New Selection, drag and drop following InfoObjects
    0VALSTCKQTY    " For Qty
    0CALMONTH      " For Month and restrict with less then or equalto option variable (single value, user input) .
    In the same way build for Value and other Keyfigures on 0IC_C03.
    And
    Drag & drop
    0MATERAIL
    0PLANT  " Give some Input Variable.
    Thanks
    Reddy

  • Stock Valuation - Inventory Management Cube

    Dear Sap Gurus,
    We have implemented the Inventory Management Cube in BW.
    Quantities are correct, but we have difference on the stock valuation.
    For some material stock value are correct, for some other they are not correct.
    A saw a lot of OSS notes and how to on this subject, I am trying to solve this issue using these documents, but based on your experience could you explain me how you solved this issue ????
    Thanks,

    Hi
    Did you follow the correct steps?
    Initialisation of BX data in the first step.(Loading of Opening Stock)
    Then The request in which the opening stock was loaded must always be
    compressed with a marker update
    Init load of BF And UM in the second step
    The request in which the historical material documents were contained
    must always be compressed without a marker update and
    Successive delta uploads must always be compressed with marker
    updates
    Check this whether you have done this or not.
    Because of missing the steps here also would give you wrong values,
    Regards
    Ram

  • Inventory SnapShot Cube and Daily Load Cube

    Our requirement from the snapshot cube is to provide queries which show end of month balances similar to as what is shown if I run queries from the Standard daily cube (0IC_C03). 
    The scenario is as follows:
    Query requirements are to show ending balances for the period:
    Details are as follows
    1)     I create a query based on the 0IC_C03 cube, the characteristics are say for example plant and fiscal period and the key figure is Quantity Stock
    The results will display the balance at the end of each period so for example
    The Key Figure in this cube is non cumulative and is 0TOTALSTCK
    Period: 01 Quantity: 0
    Period: 02 Quantity: 5
    Period: 03 Quantity: 8
    Period: 04 Quantity: 2
    Period: 05 Quantity: 2
    Period: 06 Quantity: 2
    Period: 07 Quantity: 2
    2)     I create the same query off a version of the SnapShot cube as defined in the How to Inventory guide
    The results displayed are the movements (changes)
    Period 02 Quantity: 5
    Period 03 Quantity: 3
    Period 04 Quantity: -6
    Has anyone got a solution so that I can have the same result set for example 2 than what I get in example 1?
    At the moment the approach I plan to take is to datamart 0IC_C03 and work with the cumulative key figures which are used in 0TOTALSTCK.  I would like thoughts on this approach and solutions otherwise.  Thanks

    hi
    You have to compare the exception aggregation set for every key figure and the defined time charecterist
    Regards
    N Ganesh

  • Missing movement type data in 0IC_C03 cube

    Hi Gurus ,
    i  have deltas running for 0ic_c03 cube in B1 7.0 i have used transformations for loading cube .
    In a report of this cube for plant material stock,  i can c the quantities matching with MB51  report of R/3 where as the values are not matching for sum material ( negative stock values with 0 qtys )
    i found that a movement type 121 data is missing in BW
    i have read thread on the forum suggesting  to work on OMJJ transaction and make 121 movement type as statistics relevant.
    But i want to know how this action will effect on R/3 update controlling ?
    any inputs will b a grt help
    Edited by: Rajesh Dalwadi on Jan 13, 2009 12:09 PM

    Hi,
    We faced lot of problems with missing movement type, fo that we taken correct confirmation from MM team and then added it in Update Rules and deleted the data in Cube and then Re-Initialized the Cube.
    To do this, you need ECC Down Time. I'm talking about BW 3.5. I think in BI7, it may be easy, (without taking down time, pls check).
    Thanks
    Reddy

  • Display of Vendor in the 0IC_C03 cube

    Hi all,
    I am using the 0IC_C03 cube to display quantity and value of raw materials received, issued and consumed. Each one is being restricted by movement types. Is there any means to display the vendor with regard to received from, issued to and consumed by.
    Cause the Vendor is displayed against items which do not have any movement type.
    Please suggest.
    Thanks in advance,
    BP

    Hi BP,
                I dont hink so you can add any Vendor detail irrespective of Movement type, that cube is especially for movement type wise details.
    Regards,
    Rajdeep Rane.

  • Adding fields to 0IC_C03 cube

    Hi friends,
    I have to add some fields into 0IC_C03 cube. The fields are reson for movement ,special stock indicator,sales order etc. They are cmg in the datasource 2lis_03_bf. I did add them and load the data , but the data was not coming properly. Is there any other method by which i can make use of these fields without adding them in the cube and make a multiprovider on that. I need to have the customer field also. Will this data come if i make a multiprovider on top of this . Can i make a generic datasource from the table which is giving these fields and make a DSO with these fields and make a multiprovider on it.
    Will the key date concept work on this .
    I would appreciate ur help.
    Thanks,
    Kapil

    Dear Kapil,
    Pleae go through the link provided bleow hope this wil help full.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Cheers,
    VEERU.

Maybe you are looking for