Inventory Agent still Running, Error 2099, 2095, 2092

Hello all,
I have a handful of NW servers that I'm trying to inventory and find that
on one server the inventory works fine for several hours and then stops.
The error in the SYS:etc/ INVAGENT.Log file on that server reports the
following:
Inventory(InvAgent):Dec 4, 2004 6:02:52 AM:INFORMATION:The Inventory
Agent mutual exclusion validation results are 1
Inventory(InvAgent):Dec 4, 2004 6:02:52 AM:INFORMATION:2099:Initiated a
schedule instance of the Inventory Agent.
Inventory(InvAgent):Dec 4, 2004 6:02:52 AM:ERROR:2095: The previous
instance of the Inventory Agent is still active. The Inventory Agent
will not be scheduled.
Inventory(InvAgent):Dec 4, 2004 6:02:52 AM:ERROR:2092:Unable to
initialize the Inventory Agent. For mote information, see the ZfS 6.5.0
error message documentation at http://www.novell.com/documentation.
Prior to these messages, I was getting Zen console messages every 20
minutes that said that the policy processed successfully. I'm only
running the one policy (for inventory) so far.
Thanks for any help or direction.

John,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Firefox does not "close" when closed under Windows 7; Task Manager must be used to "End Process." How do I close Firefox and reopen it without getting a "Still Running" error message?

Even though Firefox has been updated multiple times (currently using Ver. 3.6.13) since I started using Windows 7, I am still unable to totally close it from the toolbar or taskbar. Firefox does closeout on the screen but apparently continues to run in the background. If I open Firefox at a later time, I get an error message stating that Firefox is still running. I then have to go Task Manager to "End Process." Electing to do so allows me to restart Firefox. I never had this problem with Firefox when using Windows XP and I never have this problem with any other software under Windows 7.

https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit

VZAccess Manager Still Running

Hi All,
I have a Pantech USB modem through Verizon and lately VZAccess Manager (VZA M) has been giving my laptop a fit. When VZA M closes, it takes about one to three minutes to close and if I try to start a new session without restarting my laptop I get the VZA M "is still running" error message. I'm trying to keep an open mind about this inconvenience but our usage (the modem is also shared with a desktop which, fortunately, doesn't appear to have this problem) is above average this month already. I hate to have the 5GB quota eaten up by opening e-mail and project tabs when I don't have to!
Theories: my laptop has recently been in for repairs and there may be some sort of residual network left over that's causing VZA M issues...perhaps trying to run while the access manager is trying to close? I recall reading that VZA M doesn't do well with VPN's and I'm curious if that could be the problem. Both of the computers have also been recently outfitted with Kaspersky 2011 anti-virus software and I wonder if that could also be a factor since it scans in realtime with the internet. I've tried pausing the sweep while running VZA M but that doesn't seem to make a difference.
Any ideas would be very, very much appreciated!

Thanks Kimberly_Nicole (and Natavia)! Re-installation seemed to do the trick.
I made certain everything was working properly via Control Panel and then downloaded the newest version of VZAccess Manager from VZAM. I uninstalled my old version, restarted (just to be safe) and then installed the newest version. I believe the directions indicated that reinstallation could take place with the CD...but since the CD had picked up an enormous gash somewhere along the line I decided to download the newest version since, either way, I expected to have to download expensive updates.
And yes, I never encountered the VZA M "is still running" problem prior to the repairs. I'm thinking that one of the drivers or incidental files was deleted or corrupted during the experience. Re-installation did the trick!
Again, huge thanks to Kimberly and Natavia!

An error occurred while running the Inventory agent in InventoryEnforcer

2007.03.07 15:00:00 [Console:SERVMAN SCHEDULED ITEM] Inventory Agent:
Found KeyValuePair in INVSETUP.INI, agentRuns = Subscriber
2007.03.07 15:00:00 [Console:SERVMAN SCHEDULED ITEM] Inventory Agent:
Found KeyValuePair in INVSETUP.INI, forceDebug = false
2007.03.07 15:01:12 [Console:SERVMAN SCHEDULED ITEM] Clean the
Inventory Agent
2007.03.07 15:01:12 [Console:SERVMAN SCHEDULED ITEM]
Inventory(InvAgent):Mar 7, 2007 3:01:12 PM: An error occurred while
running the Inventory agent in
InventoryEnforcer:EnforcePolicy(Distributed Server Package
ServerX:General:Server Inventor.Pol.ZEN.BO.ORG)
2007.03.07 15:01:12 [Console:SERVMAN SCHEDULED ITEM] MESSAGE - Policy
processed successfully : Distributed Server Package
ServerX:General:Server Inventor.Pol.ZEN.BO.ORG
2007.03.07 15:01:12 [Console:SERVMAN SCHEDULED ITEM] Policy has been
flagged to prevent future scheduling : Distributed Server Package
ServerX:General:Server Inventor.Pol.ZEN.BO.ORG
I have reinstalled de ZfS 7SP1 Inventory Agent on the server.
Did not help.
Recreated the Distributed Server Package with only Server Inventory
Policy enabled. And succesfully distributed it to the subscriber.
Did not help.
Restarted server, did not help ;-)
Checked if INVNATVE.NLM, INVAID.NLM and MPKSCAN.NLM are installed. OK
Inventory Policy is referred to sane Inventory Service object as
workstation inventory policy
Inventory Service on root service has Machines Attached option
enabled.
Workstation inventory works fine from all our 36 locations.
Server inventory i am testing from one location.
We have Netware 6.5 SP5 with ZfD and ZfS 7 SP1 on all our locations.
Greetings from the Netherlands,
Michel Woltjer

Michel,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

SQL server agent job running as Agent Service Account whose service account does not have r/w access but is still able to write?

Hi. I am newer to SQL server security and am reviewing some of our SQL server's configuration to make sure the services are running under accounts with least privilege. I have a SQL server 2012 instance whose Agent service is configured to run
under an AD user account named 'SQLServices'. The jobs on this server are configured to run as 'SQL server agent service account', which means they should execute as user 'SQLServices'. The jobs are set up to execute SSIS packages which read and
write to a database on the same server where the agent job is scheduled and SSIS package installed (all on same server). The jobs are currently executing without error and are reading writing data correctly. Upon close examination, it turns out the
SQLServices account is not assigned to the 'sysadmin' role and had no users mapped to any databases on this server. How are these jobs working? I verified in profiler that the login name indeed is 'SqlServices'. I also verified
that SQLServices login has no database access by remote-ing onto the server and trying to log into the DB, and access was denied as expected. According to the literature, the Agent service needs to be a member of 'sysadmin role' but I am reading
some cases where that is not necessarily the case. So this is not so concerning. What is concerning is that the login 'SQLServices' had no access to the databases on that server yet it is reading and writing to the databases as if it does.
The only thing I can think of is maybe jobs run as 'SQL server agent service account' on the same server as the databases it r/w to somehow has some kind of default access. What am I missing here? Any input would be helpful.

After 2 days on this forum I found the answer to my own question. In retrospect, I should have posted this under 'SQL Server Security', but I didn't know it existed.
The 2 threads below explain that Sql agent actually runs using SID (service) NT SERVICE\SQLSERVERAGENT if you chose that when you installed. This will automatically create an associated login NT SERVICE\SQLSERVERAGENT in SQL server with sqladmin
role. This is the login that Agent uses to connect to the local instance of SQL server. If you changed to domain account to run the service during install or after using config manager, basically NT SERVICE\SQLSERVERAGENT is still
used to connect to your local instance behind the scenes (even though you will still see your domain user as account), and the domain account is used to reach outside the server.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/9e6bb2de-8fd0-45de-ab02-d59bbe05f72e/servicedatabase-accounts-nt-servicemssqlserver-nt-servicesqlserveragent-what-are-they-for
https://social.technet.microsoft.com/Forums/sqlserver/en-US/b83a52fd-fe11-4c28-a27b-88be8ae79f2a/how-do-i-change-sql-server-agent-service-account-to-nt-servicesqlserveragent?forum=sqlsecurity

Error while updating Agent to run scheduler.

Hi,
Source: MS SQL
Target: Oracle
I am new to ODI and I want to know how to setup ODI agent to run particular scheduler.
I have created agent at topology-->Physical Architecture--> Agent and assign the respective logical agent in topology-->Logical Architecture-->agent.
Then I did right click on respective Agent under physical architecture and click on Update schedule. I am getting following error.
Can anybody help me out ?
oracle.odi.runtime.agent.invocation.InvocationException: ODI-1424: Agent host or port cannot be reached using http://localhost:8080/oraclediagent.
     at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.reThrowAgentErrorAsInvocation(RemoteRuntimeAgentInvoker.java:1064)
     at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invoke(RemoteRuntimeAgentInvoker.java:272)
     at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invokeComputePlanning(RemoteRuntimeAgentInvoker.java:361)
     at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invokeComputePlanning(RemoteRuntimeAgentInvoker.java:344)

Hi
I suppose u are using ODI 11g and ur "standalone" agent is not UP and RUNNING.
First u need to "configure" it and make it run. Then u can update scheduing.Follow the below link for configuration and starting it.
http://odiexperts.com/standalone-agent-part-611g
Thanks,
Guru

Firefox often hags with an error message somethng like_Script not complete or still running._I cannot uninstall Firefox with the uninstall program routine inthe control panel and the Mozilla uninstall helper.exe will not run either. How do I uninstall Fi

Firefox hangs with an error message something like - Script not complete or still running.
I cannot uninstall Firefox with the uninstall program routine in the Control Panel and the Mozilla uninstall helper.exe program will not run either. How do I completely uninstall Firefox so I can make a clean reload?
== This happened ==
Every time Firefox opened
== Not sure but I think it was after the update

Thanks for the reply.
I am very new to these forums (or is it fora?).
I didn't know there was a Tomcat forum.
How to I find it.
Ta much & best regards,
Pete

BPC transport error: Import still running or UJT_TRANS_OBJ version P

Hello,
We are having some issues, trying to transport an appset.
First of all we make sure that all the entries in table ujt_transport_chg are setting to "D". then we Transport a customizing order with these content. After that we check the content in target system, and it is ok.
The execution method make us fails. The msg nº is UJT_EXCEPTION030: "Import still running or UJT_TRANS_OBJ version 'P' for AppSet is filled".
Now in the ujt_transport_chg isn't a record for the appset.
Each time we transport, the same error came across.
Thanks

Hi Gares,
Thanks for your response.
Before transporting BPC AppSet, we check this table in QA and 2 records are missings comparing with Des. APPM and ASET.
We transport all the entries of the table in Des into QA system, and check it again. Table in both systems have the same records.
After that, we create a transport via UJBPCTR and import into QA. This takes more than 30 minutes and finaly fails with the mentioned error.
We check again the table in QA and APPM, ASET records have been deleted.
Thanks.

Report Still Runs When Validation Errors Occur

Hello.
I'm using Apex 4.2.1 against Oracle 11gR2 and Oracle App Server (mod_plsql).
My Set-Up:
I created an application containing a "classical" type report that is driven by a WHERE clause. I also have two date fields in an HTML region on this same page. These fields are used in the report WHERE clause. And the report is run by clicking a GO button on the page.
Here's what the WHERE clause looks like:
where table_date >= to_date(nvl(:P1_BEGIN_DATE, '01-jan-1900'), 'dd-mon-yyyy') and table_date <= to_date(nvl(:P1_END_DATE, '31-dec-2300'), 'dd-mon-yyyy')This is designed so that, if any of the date fields are NULL, then the minimum or maximum date will be used for the query.
These date fields should always have a value when the report is run, and so, I created two after submit NOT NULL validations, one for each of the date fields. If any of these fields is NULL when the GO button is clicked, an error message appears in the notification area at the top of the page.
Looking at all this, you might realize (as I do) that the nvl() functions in the above WHERE clause are redundant. After all, the validations are supposed to prevent these date fields from becoming NULL when the report is run. In any case, this set-up does work ok and points out a strange behavior with Apex.
My Problem:
If any of these validations throws an error message, the report still runs. In previous versions of Apex, if a validation (or, for that matter, any error) is thrown, the report remains static. The report region does not disappear and the report is not invoked until the user corrects the error.
If both date fields are filled, I click the GO button and the report correctly returns, say, 100 rows. But when I empty both of the date fields and click GO, the validation errors appear and the report still runs, now returning the maximum number of rows, say, 1000.
What I've Tried:
I added a Branch-to-Page with condition "No Inline Validation Errors Displayed" so that the page branches back to itself only when no errors appear inline and I changed the validation error messages to appear inline. This has no effect.
And if I remove the nvl() functions from the above WHERE clause, then, when validation errors are thrown, the report data is replaced with the "No data found" message. All very disconcerting to my users.
Does anyone know why Apex reports are still run in presence of validation errors?
And how do I get around this behavior?
Thank you for any help.
Elie

Hi, Scott.
Thank you for your help/suggestions.
I like your first suggestion: creating a DA on the GO button that causes my report region to refresh only if both begin and end date fields are populated. And so, I tried doing this.
My DA looks like:
Event: Click
Type: Button
Button Name: P1_GO
Condition: - No Condition -
Action: Refresh
Fire When Event Result Is: True
Fire On Page Load: Checked
Selection Type: Region
Region Name: People Count
Event Scope: Static
Condition Type: PL/SQL Function Body Returning A Boolean
My PLSQL Code in Expression 1:
IF ( (:P1_BEGIN_DATE IS NOT NULL) AND (:P1_END_DATE IS NOT NULL) ) THEN
RETURN TRUE;
ELSE
RETURN FALSE;
END IF;My P1_GO button was automatically changed to "Controlled by Dynamic Action". And "Execute Validations" for this button is set to "Yes".
Unfortunately, this DA does not work. When both date fields are filled, clicking the GO button does not cause the report (nor anything else) to refresh. However, if I navigate to another application tab and then return back to my report page, I notice that the report does refresh at that point. But clicking the GO button has no effect.
And when either or both of the date fields is NULLed, clicking the GO button does not cause my validation error messages to appear.
By the way, I do agree with your comment about the NVL() functions. As I had mentioned in my original post, I also realize that, with my WHERE clause, checking for NULLs in my date fields is not needed. Still, if users fail to fill these date fields, then it would be useful to remind users that these fields should be populated. This is why having the validation checks are still needed despite my WHERE clause.
In any case, would you know what I am doing wrong here with this Dynamic Action?
Also, with respect to my first question, why is Apex causing my report to refresh when validaion errors have occurred? This did not occur prior to version 4.2.
Thank you very much for any further help/advice.
Elie

My CC update keeps failing on error code 205. I have retried several times and it keeps going to error. I have tried to uninstall CC but I get error that previous update is still running.

My CC update keeps failing on error code 205. I have retried several times and it keeps going to error. I have tried to uninstall CC but I get error that previous update is still running.:

Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools

HT4972 I have an Ipad still running on version 4.3.3 i have erased all its content and tried updating to the current update and it goes through the whole motions and at the very end an error message comes up saying the ipad was not able to update. What ca

Can someone help me updating my ipad? is still running on version 4.3.3, i have deleted all its content I have restore to original settings and still cant update.

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

How to get lauchctl daemons/agents to run only once a day

How do you get a daemons/agents to run only once a day regardless of the error code of the .sh you are running?
(not I'm not looking for run once or run on reboot. I want a job to run at 3am every day and it has several bash commands in it. Regardless of the returns by any of the commands in the script, I only want this to run once - NO RESPAWN).

Ok still not working.. here is the plist
the .sh file does file processing and then uploads xml files to my server and should run once a day. Here I have it running at 11:45am. It completes and then runs again and again and again.
The plist is placed in LaunchAgents and loaded with $launchctl load com.iclassicnu.crontabtest.plist
ideas?
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>label</key>
<string>com.iclassicnu.crontabtest</string>
<key>ProgramArguments</key>
<array>
<string>/Users/dan/Desktop/iClassicNu/Idea/Forexite/ForexUpdate.sh</string>
</array>
<key>WorkingDirectory</key>
<string>/Users/dan/Desktop/iClassicNu/Idea/Forexite</string>
<key>OnDemand</key>
<false/>
<key>Nice</key>
<integer>1</integer>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>11</integer>
<key>Minute</key>
<integer>45</integer>
</dict>
<key>StandardErrorPath</key>
<string>/Users/dan/tmp/icnTest1.err</string>
<key>StandardOutPath</key>
<string>/Users/dan/tmp/icnTest1.out</string>
</dict>
</plist>

Cannot publish Business Rules because supposedly Validation is still running

Hi All
I am trying to exclude business rules (ticking the Exclude flag on the UI) on a certain entity. When I try to publish the changes the message that I'm greeted with states:
"Business rules cannot be published or refreshed while validation is running for the entity's model. Wait until validation is completed then republish the rules".
The entity is validated when new data is staged in via stored procedures that run on a schedule in SQL Agent. I have turned SQL Agent off to halt any data updates/validation. I still get this message.
What tells it that validation is still running. Is there a flag in the database that could be corrupted? Or a suspended instance perhaps? Has anyone else encountered such as error?
Any help is appreciated.
Thanks, Mihir

Is the version large enough that validation can take more time. Can you check if any validation is running by executing
[mdm].[udpValidationIsRunning]
Also can you confirm validation process is running in Service Broker by checking
SELECT 1 FROM sys.dm_broker_activated_tasks WHERE procedure_name = N'[mdm].[udpValidationQueueActivate]'
-Nithesh Shetty Software Engineer, C & E -> IMML -> MDS, Microsoft.

Inventory Agent on Netware not functioning

I was wondering if any one else was having problems running the inventory
agent on Netware. A little about my environment. I have 22 remote sites
each with a Netware 6.0 SP5. Each of the boxes at the remote sites is
running GroupWise 6.0 SP4, DHCP Server, Symantec Antivirus Corporate
Edition 9.0 and Computer Associates Brightstor Agent. This is a pure IP
shop and each site is connected with various speeds of Frame Relay. Here
at the main site, I have a dedicated server for Zenworks, running the
Zenworks databases and services for Desktops and Servers. This server is
also Netware 6.0 SP5. All servers use the JVM1.4.2 downloaded from
novell's site.
I was able to successfully depoly the ZfS agent and the console runs fine
on the remote servers. I have successfully deployed applications and other
policies with the exception being the inventory agent. When the agent
begins to run at the appointed time, I'm presented with some java errors:
java: Page fault processor exception occurred while executing class
com.novell.application.zenworks.invagent.InvAgentE xecuteNW
This is immediately after it loads XMLParse.NLM and REGEXPRS.NLM. I
suspect that it has to do with GroupWise and it's usage of the XML Parser,
but I've been reluctant to take down a production service to test. Since I
have no test environment, I thought I'd ask if anyone else has seen
something similar.
Thanks

Marcus,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Ibot running error

Hello,
I am trying to run the ibots with user name Administrator but getting below error. I checked with ibots permission. Still getting error anybody know the exact solution for below error.
+++ ThreadID: 10f4 : 2012-07-23 16:12:38.071
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Path not found (/users/administrator/_ibots/ibot for pdf)
Error Codes: U9KP7Q94
Error Codes: AGEGTYVF
+++ ThreadID: 10f4 : 2012-07-23 16:12:38.102
iBotID: /users/administrator/_ibots/ibot for pdf
...Trying main iBot loop again.
+++ ThreadID: 10f4 : 2012-07-23 16:12:38.118
... Sleeping for 3 seconds.
+++ ThreadID: 10f4 : 2012-07-23 16:12:41.119
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Path not found (/users/administrator/_ibots/ibot for pdf)
Error Codes: U9KP7Q94
Error Codes: AGEGTYVF
+++ ThreadID: 10f4 : 2012-07-23 16:12:41.134
iBotID: /users/administrator/_ibots/ibot for pdf
...Trying main iBot loop again.
Hello All,
I am trying to schedule ibots , with the user Administrator but getting below error. I checked created ibots permissions. Administrator have permissions to run the ibot. Anybody know the exact solution for below error.
+++ ThreadID: 10f4 : 2012-07-23 16:12:41.150
... Sleeping for 5 seconds.
+++ ThreadID: 10f4 : 2012-07-23 16:12:46.151
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Path not found (/users/administrator/_ibots/ibot for pdf)
Error Codes: U9KP7Q94
Error Codes: AGEGTYVF
+++ ThreadID: 10f4 : 2012-07-23 16:12:46.167
iBotID: /users/administrator/_ibots/ibot for pdf
Exceeded number of request retries.
Thanks,
Pradip

I'm getting the same error code. I think it's a bug in obiee 11.1.6 with a "Get Recipients from the Analysis Used in the Agent Condition" option when using a Analysis with a union.
When i rewrite the analysis without the union the ibot/agent runs without an error.
Does anyone know if this issue was ever solved in a patch?
full error output:
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: An invalid object was accessed during evaluation.
Error Codes: QBB4RZQS:SDKE4UTF
Location: saw.delivers.rpc.getMetadata, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Expression: requestVariables.PREFERRED_CURRENCY
Error Codes: AGEGTYVF
AgentID: /shared/Agents/Common/Eenmalige opstarten/test2
...Trying main Agent loop again.... Sleeping for 3 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: An invalid object was accessed during evaluation.
Error Codes: QBB4RZQS:SDKE4UTF
Location: saw.delivers.rpc.getMetadata, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Expression: requestVariables.PREFERRED_CURRENCY

Inventory Agent still Running, Error 2099, 2095, 2092

Similar Messages

Maybe you are looking for