Inventory balance report in Group Currency

Hi MM gurus,
Does anyone knows a standard SAP report that I could run to get inventory balance in group currency? I know I could run MB5B to get inventory balance as of a certain posting date. But the report only shows me the amount in the plant currency (local currency). For example, I have a plant in Germany and the default currency is EUR. When I run MB5B, the report shows me inventory balance in EUR. I would like to see the balance in USD which is our group currency. Any help will be greatly appreciated.
Thanks,
Cassandra Wong

Hi ,
If you are using any report like MC.1 to MC.9 you can choose From menu SETTINGS->CURRENCY->ANALYSIS CURRENCY.
Here you can provide your group currency for valuation.
Note: MM5B has no such options.
Thanks,
sudhakar

Similar Messages

Reporting in Group currency

Dear All,
We have an issue related to report as below
Our SAP system is currently set up to report in the following company currencies :-
1000     GBP
2000     GBP
3000     EUR
4000     EUR
5000     GBP
Currently our reporting or group currency is GBP, so co.code 3000 and 4000 are also reported in GBP.
The issue is, can we report in more than one Group currency at a time ? If possible we would like to
report group results in GBP and EUR. If that was not possible, is it difficult to change Group currency from GBP to EUR.
Looking for your sugggestions.
Thanks in advance
Prasad

Hi Paul,
Thanks for your quick reply.
All the above mentioned co.codes are assigned to only one controlling area.
In controlling area currency settings are as below:
Currency type: 30 : group currency
Currency       : GBP
Now can you please suggest me, how to proceed further.
Thanks in advance
Regards,
Prasad

Report Painter for Creating Report in Group currency

Dear all,
I have created a report using report painter. I but currently the figures are in Local currency. May I ask how can I convert these figures into Group currency?
Thanks.

Hi,
In the characteristics you have defined if you double click you can see on top BASIC KEY FIGURE select Group Currency and the same shall happen.
Revert for further help
Regards,
Rahul

Trial balance report in Mutilple currencies

Hi,
we are working in oracle applications 11i
How can the gl super user generate different versions of trial balance report. each in a different currency, euro, etc
We have the MRC installed for USD.
Please correct me if I'm wrong, I' ll need to create a new reporting set of book, a new reporting responsibilty, etc.
But, is there any way that we can get from the system sucha report without the above setup?
need help urgent please
Edited by: AHS on Jan 6, 2011 12:40 AM

Hello.
Translate your balances to the desired foreign currencies.
Octavio

Trial balance report in transaction currency

Hi,
How to get trial balance report as per trasaction currecy.
thanks

Dear Sravanthi,
Try report S_ALR_87012277 with tick on balance in foreign currency.
See if this fulfills ur requirement
Regards,
Ajay

Company code currency balance not equal Group currency balance

Dear experts,
Some of our account balances are inconsistent bewteen the company code and the group amount. This company has the same currency in both the company code and group currrencies which are USD. The exchange quotation is also setup in OB08 with 1 in both dir / indir quote. Below is an example for a HKD expenses with a HKD AP account.
GL accounts setup with same currency as company code / group currency.
Exchange quotation setup in OB08 for HKD to USD is dir.qut. 7.8 and indir.quot 7.8.
After translation, the result supposed to be,
In Document currency, Dr expenses HKD780, Cr AP HKD780
In Local currency (company code currency), Dr expenses USD100, Cr AP USD100
In Group currency, Dr exepnses USD100, Cr AP USD100
However, the current result is,
In Document currency, Dr expenses HKD780, Cr AP HKD780
In Local currency (company code currency), Dr expenses USD100, Cr AP USD100
In Group currency, Dr exepnses USD110, Cr AP USD110
The amount in local and group currency should be the same supposedly as they are in the same currency.
Have anyone ever experienced the same situation?

Thanks all,
I have checked that both 1st local currency (company code currency) and 2nd local currency (group currency) are USD.
Our user also didn't change the group currency amount during data entry as there seems no way to alter the amount as it is greyed out.
Is there any other configuration or system flow that may be configured to post these 2 currency amount in a different way of translation?

Inventory Balance Report

Hello,
Does anyone know a standard SAP report that shows inventory balance of material as of a certain date? For example, right now we are at 5/26/09, I would like to know my inventory balance as of 4/30/09. Thanks in advance for your help.
Best regards,
Cassandra

Thanks Pradu,
This works!
Best regards,
Cassandra

Inventory Balance Reporting - Datasources?

I need to do ending inventory reporting by material codes. We have been using the LIS structures with datasources 2LIS_03_S196 and 2LIS_03_S198. We are looking to move to the new LO extractors 2LIS_03_BF and 2LIS_03_BX. In this case I only need end of month balances and not any of the movements.
However, I came across datasources 0CO_PC_ACT_02 and 0CO_PC_ACT_05 which feed to infocuce 0COPC_C04. Has anyone used this datasource and does it give the same ending inventory balances as the LO Extractors?

Hi John,
We are in the same process here, but if you require period ending inv values then , 0IC_C03 gives good results
We are using 2LIS_03_BF and 2LIS_03_BX
regards
Lalan

Difference in Local currency and Group currency Balance

Hi,
I have a query where ...
Company code has 2 currencies ;Group currency is USD and Document Currency is GBP
This GL account is zero balance account . It has alredy set up in Document spitting customization setting
Through FB03 normal view we can see the zero balance but while displaying the document general ledger view with option of group currency ; it is showing zero balance for the local currency and balance amount for group currency USDu2026
Can I get any suggesion where should I need to check for this?
Thanks in Advance

Hiten,
We are on ECC6.0. For us the problem is ongoing production orders.
Based on SAP notes about excluding zero balance orders from settlement process, I tried to close such orders but system does not allow it as it sees the parallel currecy balance.
Thanks,
Sanjay Wagh

Benefits of Maintaining Group Currency

Hi,,,,,
Can anyone tell me the benefits of maintaining Group Currency. An organisation under which i am working has 3 foreign Susbsidiary. In that we have maintained company code currency as per the local requirement as 1st currency.
But any one can tell me the benefit of maintaining group currency.
Regards,
Thnaks in advance.
SAN2008

Hi,
Group currency is maintained at client level so if you are using four company code in different countries and if your parent company is India then your management will want to see balance sheet of other country's company code in INR also.
So, your group currenyc will be INR which is maintained in SCC4. So, when ever foreign company code make posting in their currency like USD, EUR, simultaneously it is also updated in INR.
In report S_ALR_87012249 just select 30 i.e. Group currency in currency type. You will be see your balance sheet in group currency.

Group Currency In BCS

HI,
We have group currency is USD. There are some company codes whose company codes currency is also USD.
Insuch cases how do we get the group currency field filled for these company codes as USD, since unless we fill the group currency we cannot create the consolidated reporting by group currency.
BCS experts please let me know your inputs.
Regards,
Ram.

Hi Dan,
I don't agree with this your paragragh:<i>
If a group currency is provided with data collection, as suggested by Eugene, the exchange rates are not always what is required for reporting (Generally Accepted Accounting Practice- GAAP). Thus translation task is used in this case as well.</i>
I mean if I provide, say, in a flat file data for upload where I have
-- amount in local currency, which equals the group currency ($ZZZ)
-- amount in group currency ($ZZZ)
then there is no exchange rate (and moreover the wrong rate) and currency translation execution.
Do you remember the system information after the currency translation which says that data not all consolidation units were translated?
It's exactly our case. The system finds out that the local currency equals to group currency and doesn't perform the CT.
BUT, it makes check if both amounts are equal. Though, not sure that the check is made in case of missing completely amount in GC.
Do you agree?

SAP Report to view GL Balances in Group Currency.

Hello,
Can any one help me out to know SAP reports which will help me out to know GL Balances in Group Currency.
Thanks,
Bala

Hi,
There are multiple reports wherein you can select the currency type while generating the account balances report.
e.g.
S_ALR_87012277 - G/L Account Balances
S_ALR_87012301 - Totals and Balances
Both these report have Currency Type as a selection criteria, which will help you generate the balances in Group currency, if required.
Regards,
Ramanand Bhatt

Vendor-Customer balances in group currency-table/structure/function module?

Hi All,
Which table/structure/function module can be used to get balances for vendors and customers in group currency? We just wnat to extract balances in group currency so FBL1N and FBL5N are not options. Is there any SAP report which can provide these balances for both vendors and customers?
Thanks and regards,
Pinky

Hi Pinky,
I came across one report S_ALR_87012079 - Transaction Figures: Account Balance, Program RFSRRCUA, which extracts Account Balances of Vendor. Once the report is executed, you can do Currency Translation from one currency to different currencies. In the output screen, in the Top Menu, select 'Settings -> Currency' and you can convert to another currency. I am not sure, if this helps you. If this helps, kindly update your comments here.
Thank you.
Suresh Jayanthi.

Customer balances in Group Currency

Is there any way to get the Customer balances in Group currency - I am running TC S_ALR_87012172 for a UK Company Code. This TC provides me balances and details in GBP only and does not provide the option to get my USD balances. Is there any other transaction which would allow me to get the same type of report but in both LC and Group currency or at least only on GC? Same goes for TC S_ALR_87012082 for the payables side.

Hi
Can you try to edit the fields in layout in same t-code , also you can try to check the report in t-code: FBL5N if group currency filed is not avalible.

Vendor and Customer Hard and Group Currency balances

Please let me know the table names of Vendor, Customer and GL balances for Hard and Group currencies (Ex KNC1 for Customer balance in Company Code Currency)
Ramesh

I don't think they are available.
But if you have any requirement in the customization report, you can convert the values of KNC1 with TCURR table rates based on the posting date.
Rgds
Murali. N

Inventory balance report in Group Currency

Similar Messages

Maybe you are looking for