Inventory Bin level management

It would be of great marketing advantage if SBO supported inventory/stock bin locations. This has been spoken about for years, and the present warehousing add ons have to overcome the inherent limitations of the SBO file structures and SDK.
Regards
Jeff Patch

Hi,
Refer this links...
http://help.sap.com/saphelp_nw04/helpdata/en/8c/fd5869a94711d1890a0000e8322f70/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c1/376899449a11d188fe0000e8322f96/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a9/0a383fdb800804e10000000a114084/frameset.htm
as you can see from the last link provided before:
http://help.sap.com/saphelp_nw04/helpdata/en/a9/0a383fdb800804e10000000a114084/frameset.htm
here you can check if there is something useful for you
Hope this help............award points
Bye
raj

Similar Messages

Bin level cycle counting - material appears as 'ready/blocked'

Hi all,
I could not find an answer to this question in the previous posts.
Cycle counting has been set up at the storage bin level. When a new quant is generated for a material, then the material appears again on the inventory list (LX26) with description 'Ready/Blocked' although it has already been counted.
Could someone confirm if this is SAP standard behaviour or if there is something odd going on here?
Many thanks!
Kind regards
JHK

He all,
I have a similar question. Cycle Counting only within IM if you have batch management.
Scenario:
Customizing = only one count per year (365 days) KZ = 'A'
After counting all Materials type 'A' including Batches everything seems ok. But receiving a new Batch (new number) to an already counted Material/Batch Type 'A' the material appears again in the cycle counting transaction MICN or MIQ1
Could you confirm this SAP behavior.
Many Thanks

Count at bin level and quant level?

what is the difference between cycle count at bin level and quant level?
Thx

If you use cycle counting inventory at quant level, the system does not set the inventory block for the entire storage bin. It sets the block instead for the quant to be inventoried.
You count only the selected materials, not all materials in the storage bin. If you manage storage bins with mixed storage, these storage bins are accessible for stock movements with other quants.
There can be open transfer orders for all materials that were not flagged for cycle counting in the inventory document. You can also create transfer orders for these materials during the inventory.
The system saves the inventory data at quant level.
In a stock movement, if you move a quant from one storage bin to another, the system deletes the quant in the source storage bin and creates a new quant in the destination storage bin.
Because the system stores the inventory data for the cycle counting inventory at quant level in the quant data, any inventory data that you previously entered is lost in this type of stock transfer.

Create the stock in storage bin level

Hai all
 while i am doing transfer of order it is asking that storage unit type and the material stock is not maintained in storage bin .
can anybody tell me how to maintain the stock in bin level .please help me is there any tcode for that
regards
satish

Dear Satish
A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
You can also define the following additional characteristics of a storage bin:
 --> Maximum weight
 --> Total capacity
 --> Fire containment section
 --> Storage bin type (for example, for small or large pallets)
With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
For information on how to define storage bins, call up the Implementation Guide (IMG) for Warehouse Management and see under Master Data --> Storage Bins .
Generally speaking, you can use any combination of letters and numbers for a storage bin coordinate with the exception of certain alphanumeric characters that are used for stock placement strategy P (according to pallet or storage unit type).
When goods are placed into storage, the system selects coordinates in ascending order according to specific sort criteria, and assigns the next available storage bin based on the coordinate structure you define for creating bins.
Thanks
G. Lakshmipathi

Report to see the value of material at storage bin level

Hi,
The requirement is to see the quantity and value of material stored at storage bin level.
Is there any standard report available to see the same.
thanks

Hi,
Check on it:-
Storage bin should display in MB52
pherasath

Help - Item Assignment at Inventory Organization level from the Interface

Hi,
I have developed an Inventory Item upload Interface (MTL_SYSTEM_ITEMS_INTERFACE Table) for Oracle Apps R12.
It works fine in uploading the Items to Master Org which the template is created. But When I tried to upload at Inventory Organization level it returns an error says 'Template or Template ID is not assigned for the Organization'.
How can I assign/upload the Item at Inventory Organization Level? I have already tried the Organization Item Assignment Report, It works fine and assign the Items to relevant Organizations. But the parameters are Item Range which I cant use those parameters.
Please help me to Upload items at Inventory Organization level from the Interface.
Thanks

open any delivery.
1. select any delivery item number( double click).
2. go to text tabstrip of the item.
3. select the text type and double click on the blank space where we write some texts will give you new screen for writing text will give you text screen.
then in menu: goto->header will popup screen with details given below.
text name: delv+item num
Language: 'EN'
text ID: '0001' " for first text type and so on.
Text Object: 'VBBK'
****CODE.
data: ist_text type table of tline,
 wa_text type tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
 CLIENT = SY-MANDT
 id = 'textid'
 language = sy-langu
 name = 'textname' " its concatenation of Dlv no. and item number.
 object = 'VBBP'
tables
 lines = ist_text
EXCEPTIONS
 ID = 1
 LANGUAGE = 2
 NAME = 3
 NOT_FOUND = 4
 OBJECT = 5
 REFERENCE_CHECK = 6
 WRONG_ACCESS_TO_ARCHIVE = 7
 OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward points if helpful.
Regards
Ashok

Second level Manager Unable to view the leave request

Hello Experts
We are using three levels approval leave request, first level manager able to approve successfully, when second level manager approving the leave request is unable to see any contents inside the request, its showing blank.
Kindly help me on this.
Thanks
Neelima.

Hi,
I have a requirement in which I have to sent Leave Workflow to three approvers. For that I maintain the approvers in a customising table. What I did is, I took a copy of the standard Leave WF and added a step in loop (to read the table maintained, through a bor method). For the last approver, he has to get the standard leave approval task and for that reason i looped my custom bor for 2 times and put the standard leave approval task outside the loop.
Now the issue is that, eventhough the first approver gets the workitem and approves that, the next approver is not getting the workitem for him. Workflow is going into an error state stating that the successor node is not found.
Please tell me whether my approach for customising leave workflow is correct. And if correct, what could be the reason for the error that I get.
Regards,

How to make Default the Higher-Level Manager of the employee

Dear experts,
how to make Default the Higher-Level Manager of the employee as Further Participant in performance management ?
Regards,
TVS

Hi,
The delivered BAdI below defaults in both the appraiser and appraisee as part-appraisers//Default Further Participants.
BAdI Area: Appraisal Enhancements
BAdI Definition: HRHAP00_DOC_DEF_DO (Appraisal - Default Further Participants)
App. Enhn.: DEFAULT_ALL_MANAGERS
Implementation: HRTMC_DEF_OTHERS
Implementation short text: Determine All Managers
Implement this BADI in SE18/SE19 and write the desired code in the BADI methods
Hope this will help u out.....
Regards
Lakhan

No stock at storage bin level

hello,
during outbound delivery creation, we need to do picking though transfer order. but the system cannot find stock at storage bin level....
how can we create stock at storgare bin level ?
regds
pamela

Please check the stock for that item in LS24. If exists note down the storage type.
Check whether the Storage type search sequence exists for that particulare storage type in the TO by creating it manually. Create TO --> Click Storage type srch seq in the top and then check whether the storage type exists in the search. If not enter the storage type and push stock figures in the top and enter the qty needed and save it. Hope it helps.
Edited by: Mohanaselvan Jayaraj on May 3, 2011 10:23 PM

The next level manager is unable to view or access appraisal forms for all

I am facing an issue where in the next level manager is not able to see the appraisal docs of employees.
Follwing is the link that we found on SDN related to the same issue-
Next higher level manager should see the appraisal docs of the employees
During the PM testing, an issue was discovered with the existing logic of the Default Next Level Manager BADI.
When a manager manually reports to a NL managers organization unit, the next level manager is unable to view or access appraisal forms for all the employees who report to the manager.
For example,
NL Manager/Cheif: Susan
Manager/Chief: John
Employees: Mary and Matt
If Johns position (manager/chief) has a A 999 Reports to dotted line relationship to Susans organization unit (NL Manager), then Susan is unable to access, approve or reject the appraisal forms for Mary and Matt (Johns direct reports).
The relationship type is A 999 Reports to dotted line
Type of related object O (Organizational Unit)
We need to update the BADI in order for the next level manager to be able to access appraisal forms as described in the example above.
BADI implementation Name : Z_HRHAP00_DOC_DEF_DO
Method - IF_EX_HRHAP00_DOC_DEF_DO~DEFAULT_OTHERS
Now we are facing the following issue-
After identification of the employees who report to the managers organizational unit using the A 003 Belongs to relationship we are not sure how to pass these employees information from BADI to appraisal form, so that the previously identified Next Level Manager will be able to access, accept and reject appraisal forms for these employees.
For further details please refer the thread. I was not able to understand how this can be achieved.
Can anyone please mention in brief how I should be able to do this. I am new to this and I would appreciate any help .
Regards,
Satish.

There are no Function Modules to my knowledge. Pls try the transaction S_AHR_61016530 which would display the User's approvers as per hierarchy. This would bring datas from the HR tables. If this helps pls award points.

Service Level Management

dear all
I'm looking for the meaning of "Service level management" and it purpose in SAP solution manager. can someone tell me what it is really?
Thanks for your help

Hi
Check the foll links
https://websmp110.sap-ag.de/~sapidb/011000358700000059852008E
https://websmp110.sap-ag.de/~sapidb/011000358700000873942006E
https://websmp110.sap-ag.de/~sapidb/011000358700006405632006E
http://help.sap.com/saphelp_smehp1/helpdata/en/c7/6b1ec041ae44e28df020b232cb5fb4/frameset.htm
http://www.sap-press.com/products/Service-Level-Management-%252d-the-ITIL-Process-in-SAP-Operations.html
Regards
Prakhar

Access Level Management for Lync2013

In Microsoft Communicator 2007, there was an option to set the 'Access Level Management' as a global setting. Is this feature still available in Lync 2013 apart from setting the 'Access Levels' for each contact individually.
Since we migrated from Microsoft Communicator 2007 to Lync2013 and we needed to change some 'Access Levels', I wasn't able to do so. So would like to check if this feature can be enabled or disabled at the global level.
Thanks. Any suggestions would be highly appreciated.
BR,
Frieda

Hi,
In Lync 2013, you can view the contact in turn of Relationship as following:
You can modify the relationship of the contact by right click the contact, and choose "Change Privacy Relationship", then you can choose the relationship you want such as Workgroup, Blocked Contacts.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

Add inventory bin number field to Work Order Components Tab

Hello,
Can someone please show me how to add the inventory bin number field to Work Order Components tab.
Thanks

Hi Jay,
Can u help me in understanding as how you achieved this functionality?
Regards.

Performance Appraisal - Default 2nd level manager as Part Appraiser

Hello
Unfortnately, we are not having much success with this. The requirement is to default 2nd level manager as Part Appraiser and not show the Manager and EE as part appraiser.
For this we created a implementation for the BADI HRHAP00_DOC_DEF_DP and incorporated the same in our appraisal template. But the system is now bringing only the EE as the part appraisal.
Has someone worked on something similar and is so what is the best way to approach this?
Thanks,

Hi Harun
Thank you for your feedback. By any chance would it be possible for you to post the code that we could use as a template on our end. The reason being, the ABAP person working on this project is very new and any guidance in terms of the tables to be included etc. would be greatly appreciated.
Many thanks in advance.

How to upload the batch stock to bin level

Dear gurus
My client are going to implement WM i want to know how to upload existing batch stock to bin level.
regards
sam
Edited by: Csaba Szommer on May 25, 2011 12:10 PM

Hi,
You can use LSMW for Tcode LT01 to upload inital stock in WH.
So here u can enter all relevant data required like material, qty, batch, plant, Sloc etc..
Hope this helps you...
Rgds,
Kris.

Inventory Bin level management

Similar Messages

Maybe you are looking for