Inventory Control of new houses (construction and sale)

Colleagues,
Need  information about controlling inventory of new homes, the business process is from the construction and sale, but using the traditional solution of SAP ECC 6.0, not  EC&O
Thanks

it sounds like you have a slow database server, or one that is sending the
data over a WAN link. When you deleted the database, it had to recover all
the information in the STR files. Normally, delta scans are done every day
or so to see if anyting has changed, and then a full scan every five days.
I would bump this up to 20 since usually there very few workstations that
will need a full scan.
For you boss, I would suggest that you nicely inform him that the inventory
pulled by ZfD is at least 80% accurate but never 100%. If you have a
workstation that is not being scanned, registered, imported, etc.. you are
likely to miss it. How do you account for the WS Removal policy which will
pull out inventory when the machine is not registered for "x" days. If
anything, use the ZfD inventory as a backup for internal components only.
Good Luck,
Ken Puett, CNE,CNI
> We are running zenworks 4 ir7 on nw6 sp5. Installed it a number of years
> ago mostly for the purpose of remote control of systems. Inventory got
> installed but never paid attention to it. Now my boss wants accurate
> reports on workstations and what was in the inventory was definitely not
> accurate. Deleted the database files (sybase) and started over. It
> appears to be working but very slowly. After a week and a half it has
> discovered 248 systems. Is this normal? Was this originally setup wrong?
> Any advice is appreciated
>
> Thanks
>
> James

Similar Messages

  • T-code F110 with a new house bank

    All,
    I have created a new house bank and when I attempt to do a payment proposal with the new bank I can get all the way to where the system tells me that posting orders have occured.  However, when I I attmpt to do a print out I go to the spool jobs and the print job is not there.  When you use are old house bank the print job always shows when you go to spool job.  Is there a setting I missed when setting up the new hous bank?  Any help would be great.
    Thanks,
    Sean

    Hey Sean,
    check your FBZP settings; paying company code; payment method etc... Also in your payment run check the extended log for any informational messages and double click on any relevant.
    Hope that helps.
    Jon

  • F110 posting with new house bank

    Hi,
    I created a new house bank for a company code and ranked it 1 and and ranked the cureent one as 2.
    When users performed F110, they found payment has been made from both the banks? Some of the invoices paid fron new bank and some of them paid from old bank. What could be the reasons of getting the Payment from Bank 2, when another bank is ranked as 1?
    I checked the currency for all the invoices are same.
    Quick response will be appreciated.
    Thanks & Regards,

    Hi
    When you run APP , during the payment , it checks for the Ranking Order and checks for the available amount in that Bank.
    Go and check in FBZP configuration , Setup Bank determination for payment transactions.
    I think the Bank which you gave the Ranking Order 1 is not having the sufficient amount available for payment iey it picked the Bank of ranking Order 2 and made the payment for other invoices.
    No where it is there that old invoices get payed by old house banks and new invoices will be payed by new house banks and generally in invoices we wont assign house banks.
    But in edit proposal you can change the house bank for the invoice if you want to pay from other bank.
    I repeat when ever you run APP , it checks for the Ranking Oder first and then for the available amount in that bank.If there is no sufficient amount to pay the invoices , it checks the Ranking Oder 2 , like that ..................
    Regards
    Venkat
    Edited by: Venkat Dara on Jan 5, 2009 8:50 PM

  • Change Company Code and Sales Organization

    I have a group of records numbering about ~1K records that are in the wrong Company Code and Sales Organization. I can identifiy this group and put them in a flat file but they have account numbers that are not linear, by which I mean they aren't account numbers 1 to 1000. WITHOUT creating new customer mater records, how can I simply change the Company Code and Sales Organization code for these records? I've looked at the XD99 transaction but that seems to be limited to a range of accounts?

    Hi Mark
    It is not possible to change the Company Code and Sales Organisation of an Existing Customer.
    The only option is that you can Extend the same Customer to New Co. Code and Sales Org. by using XD01. You may use old customer as reference. Once you create the new Customer Master you may block the Old Customer master initially and later on Delete them or Archive them.
    Regards
    Amitesh Anand

  • I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help

    I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help.
    They said I need to change my settings to NAT settings. I haven't been able to figure out or find anything. I have also spoken to Apple Support on the phone for hours without being able to figure out how to do this ( i don't think he knew much either lol.) Please help me because I've got about 15-20 devices in my house that require to be connected to the internet and this is just making things ridiculously slow and painful for me.
    Thanks!

    It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them

  • HT4587 Hi, I want to set up a sound system in a new house using apple equipment. I have few sets of Bose speakers that I would like to utilise, my question is - what do I need to set it up and how do I do it with regards to  AirPlay? Thanks

    Hi, new to the forums and apple tbh.
    Moving into a new house and want to set up a sound system, thought apple would be the way to go as I have iPads, iPhones, iPod touch and nanos. I also have a few sets of Bose speakers which I would like to incorporate. What I am wondering is, what else do I need to buy to do this? Do I need seperate devices to attach to each speaker? Do I need a new router? And how would I configure it?
    Ideally I would like 4 rooms each with their own speakers that could play simultaneously.
    Thanks in advance!!!!

    First, please check out the following Apple Support article for details on setting up an AirPort Express Base Station (AX) for iTunes streaming. Note: You will need a separate AX for each set of speakers that you want to stream to. Also, note that you can stream a single audio file to one or more speakers, but you cannot stream separate audio files to different speakers simultaneously.
    Second, the Bose speakers you mentioned would need to have an audio input jack, either analog or optical digital to receive the stream from the AX. As you know, Bose makes a number of different speaker/home theatre audio options. If your specific model of speakers do, then it's just a matter to use the appropriate audio cable between the audio port of the AX and the speakers.

  • I have a new Samsung phone and I live in CT. Last month they charged me $38 on my bill for the sales tax for the new phone which was $600. I'm paying for the phone itself over 20 installments of $30 each.  Now again I'm getting that same $38 charge. I can

    I have a new Samsung phone and I live in CT. Last month they charged me $38 on my bill for the sales tax for the new phone which was $600. I'm paying for the phone itself over 20 installments of $30 each.  Now again I'm getting that same $38 charge. I can't  believe that the monthly CT tax is higher than the payment for the phone itself. Does this make sense. Last time I spoke with them on the phone it was for 1 1/4 hours for something simple. I don't want to call unless I need to. The salesman told me nothing about any of this. Thank you for any help you can offer.

    The bill from last month states:
    CT state sales tax**     $38.10
    ** In some states sales tax or surcharges are calculated on the full cost of the full retail price or VZW cost of the device you purchased and not on the discounted price you pay. The sales tax or surcharges charged on your device was based on $599.99 and appears on this first bill.
    The current bill says the same.
    Actually, now I'm realizing that last month's bill stated I was making the first payment toward the phone. Now this month also says it's the first payment toward the phone when it's really the second.

  • Moved to a new house and now i can't send emails but i can receive them

    I just moved to a new house and now i can not send emails but i can receive them...

    New houses can do that. 
    We need more info - what email service is this issue about.  Do you use several (gmail, yahoo, icloud,...) and is this issue the same for all?  If you also use a computer or other device, is this issue common to them all?

  • I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

    I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

    Urvergessen wrote:
    +You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
    Could not find that setting anywhere.
    It's in AirPort Utility, AirPort panel, Wireless tab.
    When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
    In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
    The second AP does show an IP address: 10.0.1.3.
    With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem.

  • Switched my contract to my new house and now I'm n...

    Hi there
    So I was meant to be moving tomorrow and decided to switch my Internet over yesterday morning to the new house, thinking I was saving myself the hassle of having to do it the day of the move, but instead it's created a big problem as we got a phone call from the estate agents yesterday afternoon saying that house won't be ready to move into until next week and depending on the amount of work, might not be available at all!
    Now I phoned BT this morning and explained the situation and asked them to cancel the order for now (or postpone it if that was possible but they didn't seem to understand what I meant) as I won't be in the house to receive the goods or let in installation guy in and I'll be in the house I'm currently in for possibly another week and would like to keep the Internet here while I am. 
    The guy I talked to hummed and he haaah and in the end told me I had called the wrong department and that he'd transfer me to the right one. And then he hung up on me Which I'm sure was a mistake but when I called back I got the same thing from the next person I talked to!
    My Internet is meant to be going of tomorrow and I would really prefer if it didn't and no one is helping me when I call. What should I do?
    Sorry about how long this is! 

    If you would like to try Live Chat they should be able to help you.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Field integration between Inventory Transfer and Sales Order?

    Dear Gurus,
    Hope to find you well, we have to redefine our processes of sales. Now stock from a remote site will be transferred to inventory in transit warehouse recorded. Truck Number(UDF) and Document Number  (Inventory Transfer) will be used to trace inventory status and creating Crystal Reporting from Stock Uploading till the A/R Invoice are created. My Query is how can this be achieved in SAP B1 2007 A Patch 10. Please advice. Its very important for us.
    Please find trail that will help you understand:
    Process Mapping Help Needed
    Faisal
    Edited by: Faisal Baloch on Nov 17, 2011 7:02 AM

    Dear Faisal,
    Unlike the higher package, B1 has no option to link between Inventory Transfer and Sales Order. You have to add UDF and manually maintain the link.
    Thanks,
    Gordon

  • How to post the data to a new window and control the new window's property?

    When we submit the form data to another page, we usually do the following:
    <form action="display.jsp" method="post"> will submit the form data and open
    display.jsp in the current browser
    <form action="display.jsp" method="post" target="_blank"> will submit the form data
    and open display.jsp in a new browser
    Now, what I want is to open display.jsp in a new browser, but control the window's size,
    and disable the status bar, title bar, and address bar of a new browser.
    If I do this, it can only open a html page, but not post the data to display.jsp.
    window.open('display.jsp', "newWin", "scrollbars=0,menubar=0,toolbar=0,location=0,status=0");
    any ideas? thanks!!

    <html>
    <head>
    </head>
    <script language="JavaScript">
        function doSubmit() {
           displayWindow = window.open('', "newWin", "scrollbars=0,menubar=0,toolbar=0,location=0,status=0");
           document.submitForm.submit();
    </script>
    <body>
    <form name="submitForm" action="display.jsp" method="post" target="newWin">
      <input type="text" name="param1"><br>
      <INPUT TYPE="button" NAME="button" Value="Click" onClick="doSubmit()">
    </form>
    </body>
    </html>

  • How to get new company code and controlling area in SRM

    Hi SDN,
    we are on SRM 5.0.
    Our finacial experts want to implement a new company code and controlling area.
    In SRM I can set up a new company code easily in ppoma_bbp and import a new plant from backend for the new company code.
    When testing in EBP I get the error: "company code xyz not available in controlling area zzz"
    So I need to import the new backend controlling area, too. How can I get the second controlling area in SRM?
    Thanx for help,
    matthias

    Hi Muthuraman Govi  and Sanjeev,
    in fact I can see in backend in transaction KS03 (show cost center) there in the F4s, which comp.code + controll area combinations are valid and have indeed cost centers assigned.
    So I have a new valid comp.code and a new valid cont.area.
    The new comp.code belongs to the new contr. area.
    In SRM I set the BUK attribute as described by Sanjeev (I had that already done). Still, if it is like you say, why do I get an error in EBP when trying to buy products from the new plant in the new company code...
    Is there any more config.work necessary in backend or SRM?
    kind regards, matthias

  • Hi guys yesterday i had my house robbed and they took my iMac which i purchased in 2011. so i went out and purchased a new iMac today but im having problems transfering all my music from my iPhone 5 to it. Any suggestions???

    Hi guys yesterday i had my house robbed and they took my iMac which i purchased in 2011. so i went out and purchased a new iMac today but im having problems transfering all my music from my iPhone 5 to it. Any suggestions???

    iTunes Store- Transferring purchases from your iOS device or iPod to a computer.http://support.apple.com/kb/ht1848
    Or you can use a third-party utility such as Phone to Mac - Pod to Mac.

  • I am a new Apple user and had a visitor, with an iPad, at my house.  I noticed the response time slowed greatly.  I have a Linksys N router and wondered is I need an Apple router to allow the speed to be consistent.

    I am a new Apple user and had a visitor, with an iPad, at my house.  I noticed the response time slowed greatly.  I have a Linksys N router and wondered if I need an Apple router to allow the speed to be consistent.

    I am a new Apple user and had a visitor, with an iPad, at my house.  I noticed the response time slowed greatly.  I have a Linksys N router and wondered if I need an Apple router to allow the speed to be consistent.

Maybe you are looking for

  • Why does my name appear on the iCloud account for everyone in my family?

    There are four members of my family, and we each have our own Apple ID and password that we use to sign into iCloud. We also use a variety of devices -- iPhone, iPad, Safari on Mac, etc. When any of us sign on to iCloud, we see our own individual pho

  • Don't want my pictures on my laptop but I want to access them

    I hope I am not being too redundant. I have looked around before asking this question. I just got a new laptop so that I can take PS with me. I have a lot of pictures on my main PC and I would like to synchronize these to the cloud so that I can see

  • How do I Replace A Hard Drive?

    Ok, I have a Dead Hard drive! Hard disc 1 Quick (303) I want o replace the hard drive and I do not have recovery discs Where is the best place to get these and how do I replace the HD myself I have a HP pavillion DM4 notebook PC Windows 7 Thanks

  • What is SSL/TLS in File adapter

    Hi Folks, I read the concept of SSL/TLS in help.sap.com But, still I not getting complete use of this.   Please explain me about how and when we have to use this option. Thanks, Rohini

  • Sharing Computer name

    My 10.4.11 server has correct forward and backwards DNS lookup. Does changing the "Computer Name" field in System Prefs > Sharing break anything? Does this name need to match the dns name in any manner? Thanks, b.