Inventory cycle count report

Hi
We need to implement inventory cycle count report . Is there a standard business content data source for this ?
Thanks and Regards
Arun

Sorry I never responded. It's really just a matter of what you need to report on. ISEG has all the basic information you need like plant, material, sloc, etc... so the other tables invovled is really a case by case type of thing. I can't think of much else you would really need for generic cycle count reporting.
Also, the previous post is a good method depending on your needs. If showing difference postings and whatnot is suitable, then go with the movement type. But if you need to dig deeper into it by showing system/counted quantities as well as the difference, then the custom extractor would be the way to go. For me, I did inventory accuracy/cycle counting type of reporting that needed to consider the actual quantities, as a difference of 2 units on an inventory of 100,000 units is a lot different that 2 units difference on a balance of 100 units. But that was just my case is all.
Hope this helps.
Thanks

Similar Messages

Physical Inventory & Cycle counting report

Hi,
Would like to reports on Physical Inventory & cycle counting.
Also would like to know a comparitive report which should show before & after Physical Inventory alsong with Qty & values per plant & material.
Will be pleased if I could have at IM level & WM level also.
Regards,
Vengat

Hi,
1. You can use T CODE- MI23 -Display Physically inventory data for material.
2. You can use T CODE- MB59 -Give material code/plant code/Mov Type 701-702/Posting period -Execute (F8) >> Click on current display variant button (Ctrl+F) for selection "Amt.in loc.cur".
Thanks & Rgds,
Rajesh

Inventory - Cycle count history

Hi,
I wanted to know is there a form/report, which can show the details of the historical cycle count Runs?
i.e. if we schedule to the cycle count eg. every week, is it possible to see what all items are counted 3weeks back run?
Rgds,
-Kamal

Sorry I never responded. It's really just a matter of what you need to report on. ISEG has all the basic information you need like plant, material, sloc, etc... so the other tables invovled is really a case by case type of thing. I can't think of much else you would really need for generic cycle count reporting.
Also, the previous post is a good method depending on your needs. If showing difference postings and whatnot is suitable, then go with the movement type. But if you need to dig deeper into it by showing system/counted quantities as well as the difference, then the custom extractor would be the way to go. For me, I did inventory accuracy/cycle counting type of reporting that needed to consider the actual quantities, as a difference of 2 units on an inventory of 100,000 units is a lot different that 2 units difference on a balance of 100 units. But that was just my case is all.
Hope this helps.
Thanks

Physical Inventory/cycle Counting procedure in Inventory Management

Hi everyone
i have been posting some of my queries here on SDN but i never got any reply from anyone
I had another question, Can anyone tell me what is the configuration steps for Physical Inventory/Cycle counting in IM, What are the IMG config involved for both.
2. In cycle counting if i want the system to tell what material to be cycle counted that what is the Transaction for it
Lucas

Hi Lucas,
Please go with following transaction
MI01>Create physical inventory document>Enter Document Date>Planned count date>Plant Code>Storage Location>Click on Enter button>you will get the separate screen>Enter material code>and click on SAVE button (Ctrl+S)>you will get Physical inventory document number. (MI02-Use for delete)
(After getting Physical inventory document number you go with MIO4)
MI04>click on enter button>you will get "Enter inventory count screen>Enter Phys. inventory doc.no>Fiscal year>Count date>click on enter button>you will get separate screen>Enter physical qty>and click on save button ((Ctrl+S)>you will get massage from the SAP Count entered for phys. inv. doc. 100000112"
(After completed above transaction you please go with MI07)
MI07>you will get Post inv.differences:initial screen>Enter Phys. inventory doc.> Fiscal year> Posting date>click on enter button>you will get separate screen with deference qty>click save button(Ctrl+S)> you will get document number generated from the system (Diffs in phys. inv. doc. 100000112 posted with m. doc. 4900001246)
Pls. assign the points.
Thanks & Regds,
Rajesh Kolhe

Step to Configuration the Physcial Inventory & Cycle counting

Guru
PL help Me the detailed steps to configure for Physical Inventory & cycle counting required
Thanks
sudhir

hi
you have to do the settings
Materials Management -- > Inventory Management and Physical Inventory --> Physical Inventory & Inventory Sampling
Field Selection for Physical Inventory
Default Values for Physical Inventory
Settings for Physical Inventory
Default Values for Batch Input
Maintain Copy Rules for Reference Documents
Allow Freezing of Book Inventory Balance in Storage Location
Create Inventory Sampling Profiles
Define Stock Management Levels
Define Stock Management Levels in WMS
Cycle Counting
Activate Distribution of Consumption Differences

MIBC - ABC Analysis for Cycle Counting -Report : RMCBIN00

Hi All,
We are trying to have our CC inventory indicators updated by using report RMCBIN00. We noticed that if a have a part with a very high value it is most likely to get indicator A even though the demand for that part is not as high as for a part with a very low price but that we sell thousands. Can some explain how can we use this report in such a way that considers demand? Thanks for your help.

A cycle count indicator A or B or C or D is allocated to material in the material master based on either consumption value (consumption X rate) or forecast value (forecast quantity X rate). You can also specify whether this analysis is to consider only the materials with cycle counting indicator or all materials. The cycle counting indicator in the material master records can be updated automatically by this program.

Cycle counting report

Dear friends,
Is there any standard SAP Report that gives gives the list of materials for which cycle counting process has been done and the number of times done.
Thanks,
Sanjay

List of inventory documents - MI20, MI22, MI23, MI24 etc..
Hope this helps-

What does the field Inconsistent mean for ABC Analysis for Cycle Counting report

What does column "Inconsistent" mean for report ABC Analysis for Cycle Counting (T-code MIBC)? The reason I'm asking is because I see TotalStock values greater than 0, but the Accounting 1 view for Material Master and MMBE both show zero stock. I do not understand why TotalStock in the report does not show zero. Can anyone explain how this can happen?
Note: the report is run for consumption/usage date range.
Thank you,
Doug

Hi,
MBEW table and MMBE transaction will show the current stock. When you run MIBC report for consumption, the system considers the consumption for the date range given (from MVER table), which may not be equal to the current stock. Refer the KBA: 1817237 - Stock quantities and stock values in MIBC which explains the system design.
Regards,
AKPT

Cycle Count Report

hello,
Is there a report that give me the Cycle count Result by storage type or by material?
Regards
goutham

we created a custom report that is the best solution.
I found a useful link though
https://wiki.sdn.sap.com/wiki/display/Snippets/ABAP-Cycle%20Count%20(Physical%20Inventory%20COunt)%20Report.
Try tcode MI24,MI31
also tables MACH,LINV and MARD.
Also you can set criteria in MICN
Edited by: kiranvyarlagadda on Mar 31, 2010 2:28 AM

Physical inventory cycle counting

hi friends,
i have maintained cc indicator in mmr and period of counting set in omco. but while running the physical inventory , it is not showing the list. so can anybody give the cycle counting procedure with tcodes. i will award full points. thanx

Friend
Go through the following links. useful for you to know what exactly has gone wrong in you case
http://www.sap-img.com/mm010.htm
help.sap.com/saphelp_47x200/helpdata/en/4a/58dc3ecb9f2e5ae10000000a114084/content.htm
SAP Enjoy
Regards

Inventory Cycle Count

Hi All,
I'm tryin to create cycle recommendations. If i update the old item groups with the newly created cycles, and when i run the cycle count recommendation, it shows an error, " No matching records found ITW1."
But when i create a new item group and attach a new cycle count, it works. What is the reason for this and how can this be solved?
We are on 2007B, PL14
Thanks,
Joseph

Hi
I am having the same problem with a client (no matching records found - ITW1 (ODBC - 2028)
How were you able to resolve this?
Regards
Tshepo

Cycle Counting Report - Inventory Accuracy Report

Hi All,
Please tell me the clue tables to summarize the cc report as follows -
no. of items inventoried.
no. of items in error.
Quantity variance.
how can i calculate above rquirements?
I have LINK , LINV , LINP , MSEG , MSKPF TABLES but not getting fields exactly to use.
Please Suggest.
Thanks,
Anuj Saraswat.
Edited by: Anuj Saraswat on Jul 28, 2008 1:13 PM

Dear Anuj
Can you please let us know what do you mean by
- no. of item in error
- Quantity variance
do you mean to say that quantity rejected as error and quantity variance is planned versus actual despatch ??
thanks
G. Lakshmipathi

Consignment vs owned inventory for the same material/inventory (cycle count)

Hi All,
I am looking at ways within SAP that I could differentiate materials/inventory that are consignment and owned inventory...
We have a department that are experiencing difficulties performing cylce counts as they both owned and consignments parts and materials and it is currently done manually.
Is there a way for us to generate a single inventory that includes both owned and consignment in the same report?
Any help would be great!
Cheers!
Wendell

Hi Wendell,
If you have batch management and WM, this should not be a problem.. In this case, you should be able to identify where each batch is located and if the batch is consignment or own.
If not, then execpt you separate the inventory in different storage locations, the inventory could be mixed.
Anyway, I recommend you to move this thread to SAP MM:
SAP ERP - Logistics Materials Management (SAP MM)
Kind Regards,
Mariano

BIG full inventory cycle count

Hi Experts,
We have a BIG inventory coming up in a month and it seems that no one knows how to create a CC for all the parts in our inventory... we need to count everything in stock and record it in SAP.
as of now MI31 will not work... because the ABC classifications. there will be no inventory doc. numbers created for parts that have already been counted within the set time.
and manually creating a CC for over 4000 slocs with MI01 is just crazy!!
is there a way to "override" the classifications in SAP to use MI31?
or is there a better T Code that can be used?
let me know,
thanks

Hi,
I think in that case you will have to make ABAP program by using following BAPI.
BAPI_MATPHYSINV_CREATE
BAPI_MATPHYSINV_CREATE_MULT
REgards
Sangeeta

Physical Inventory-Cycle count

Gurus,
I am getting this when use the TC-LI20
Storage bin 1000000073 in storage type 999 does not exist.What should be done.

HI,
I executed LX26.
I entered the count thro LI11N saved.
When i try clear the difference i am getting the error
Storage bin 1000000074 in storage type 999 does not exist (check your entry)
1000000074-Inventory document number
When i try in LI21 ,I get msg no data exist.
What does this mean
How proceed and complete the PI.
Edited by: murugan sivakumar on Nov 5, 2009 11:17 AM

Inventory cycle count report

Similar Messages

Maybe you are looking for