Inventory data cube ?

Hello
Could you please let me know where I will get this information , i mean in which standard business content cube ?
A need for an inventory control summary report which is a trend analysis that can provide information across branch, shows dollar amount, the amount over, under and cumulative.
Regards

Hi
Please check with info cue 0IC_C03, you may get requied information thorugh this infocube
-DU

Similar Messages

Inventory data load from Inventory Cube to another Copy Cube

Hello Experts,
I am trying to load Inventory data from the Inventory cube(say YCINV) to a copy cube say YCOPY_CINV(copy of Inventory cube), but the results appear inconsistant when I compare the reports on these 2 cubes. I am trying to populate a fiield in copy cube so that I can populate the same data back to the original cube with the new field in it, I am doing this reload back and forth for historical data purpose only.
I have seen lot of posts as how to run the setups for Inventory data, but my case does not need to perform set up runs.
Does the note 1426533 solve the issue of loading from one cube to another ? we are on SAP BI 7.01 with SP 06 ,but the note specifies SP 07 ?
I have tried note 375098 to see if it works, but I do not see the options as mentioned from step "Using DTP (BW 7.x)" in BI to perform this note
Please advise on whether to go with implementing note 1426533 or is there any other way to load inventory data from one cube to other.
Regards,
JB

Hi Luis,
Thanks for your reply,
I do not see any setting like Intial stock in DTP except "initial non-cumulative for non- cumulative". I did try using the option "initial non-cumulative for non- cumulative" ,but the results still do not match with the inventory cube data.I do not see the check box for marker in the copy cube (under roll up tab). Please let me know if we can really implement this solution ,i.e. copying from inventory cube to copy cube and then re-loading it back to inventory cube for historical data. Currenlty, I am comparing the queries on these 2 cubes, if the data matches then I can go ahead and implement it in Production, other wise it would not be wise to do so .
Regards,
JB

Inventory data not matching with R/3

Hi,
In R/3 production we have the data from 1999-Till date.From 1999-2004 Data was archieved in R/3 system.So we have two years live data in the R/3 production.
We have filled the setup tables and extracted the Inventory data then loaded into 0IC_C03 Cube.
But the values in BW report from 0IC_C03 is not matching with the values in R/3 report.
1.What could be the reason?
2.If we need to extract the archieved data from R/3 what are the steps we need to do?.
Pls help us with your suggestions.

We have followed as per the How to handle inventory managment document.
The quanity value is matching between R/3 and BW.But the Valuated Stock Value is not matching for some of the materials.For the current period it showing the right value(for ex.if we check for 12th Month).
But If we check the material for old months like October,Aug the value of valuated stock value is not matching with R/3 for some of the materials.
In RSDV validity table date maintained from 1999-Dec'200.
We are using the standard business content cubes and update rules.Is there any change needs to be done in update rules for 0IC_C03 cube to get the right values for all the materials?..
Pls help with your inputs.
Thanks
Soujanya

How to extract Inventory data from SAP R/3 system

Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?

Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK

Stock Valuation - Inventory Management Cube

Dear Sap Gurus,
We have implemented the Inventory Management Cube in BW.
Quantities are correct, but we have difference on the stock valuation.
For some material stock value are correct, for some other they are not correct.
A saw a lot of OSS notes and how to on this subject, I am trying to solve this issue using these documents, but based on your experience could you explain me how you solved this issue ????
Thanks,

Hi
Did you follow the correct steps?
Initialisation of BX data in the first step.(Loading of Opening Stock)
Then The request in which the opening stock was loaded must always be
compressed with a marker update
Init load of BF And UM in the second step
The request in which the historical material documents were contained
must always be compressed without a marker update and
Successive delta uploads must always be compressed with marker
updates
Check this whether you have done this or not.
Because of missing the steps here also would give you wrong values,
Regards
Ram

Open hub for Inventory data

Experts,
We have a requirement where we need to push out Inventory data from BW to third party systems.
We have a daily cube and monthly snapshot cube implemented.
Now, there are fields that the third party systems require including Movement type. There are 500K movements everyday so putting this field in the cube would make the cube huge. Can we have another DSO loaded only by 2LIS_03_BF that supplies data to the third party systems via Open Hub in addition to the model we currently have?
Would this be a good design or rather would it work(in theory)??

Hi,
Yes you are thinking in correct direction. Adding movement type to cube will unneccessarily increase the data volume.
Cubes are not meant for detailed data.
I would suggest to go ahead with the DSO approach. The open hub will work with DSO.
Regards,
Geetanjali

Marker update for Inventory data sources

Hi all,
why we use marker update in Cube manage for inventory data sources at the time of loading?
i heard that to avoid the keyfigures cumulation we do check that option ,is that correct/
please clear my doubt
thx

HI
(2LIS_03_BF Goods Movement From Inventory Management-------Unckeck the no marker update tab)
(2LIS_03_BX Stock Initialization for Inventory Management--
---select the no marker update check box)
2LIS_03_UM Revaluations -
Unckeck the no marker update tab)
in the infopackege of "collaps"
Cheers

Missing content for inventory management (cube 0IC_C03)

Hi everybody,
I installed the following BI content for inventory management: Cube 0IC_C03, InfoSource 2LIS_03_BX and transfer rules from data source 2LIS_03_BX to info source 2LIS_03_BX. However, I'm not able to the update rule from info source 2LIS_03_BX to info cube 0IC_C03. I can only find the old update rule 0IC_C032LIS_40_S278 -> 0IC_C03.
I also couldn't find the update rule for material movements from 2LIS_03_BF to infocube 0IC_C03.
How can I find this missing content. We are using BI Content Release 704 Level 1.
Thanks for your help!
Thomas

Hi Oscar,
unfortunately, I was not able to find a transformation for the datasource migrated to 7.0.
Btw, how do I determine to which version data sources are replicated. I have an underlying ECC6.0 system. When I replicate all data sources for that source system, datasources automatically show up as 7.0. I'm missing the pop-up question whether or not I want to replicate as 3.5 or 7.0.
Thanks in advance!
Thomas

Deploying custom report for custom hardware inventory data.

Hi!
I want do the following:
1) Extend Hardware Inventory using my own *.mof file. Like,
#pragma namespace ("\\\\.\\root\\cimv2\\SMS")
[ SMS_Report (TRUE),
SMS_Group_Name ("My Inventory"),
SMS_Class_ID ("CUSTOM|My_Inventory|4.0") ]
class My_Inventory : SMS_Class_Template
[SMS_Report(TRUE)] string SerialNumber;
[SMS_Report(TRUE)] string SomeData;
2) Extend Reporting system with my own report that will use data from custom hardware inventory. For example, joins inventoried data with SCCM resources.
3) Deploy 1) and 2) programmatically to any sccm installation. So, report should not be linked to concrete data source or report server url.
If you know the tools that may help me, it will be very helpful! Many thanks!

You should ask the .rdl part from the SQL Reporting services forums, you should get better answers from there, because this isn't purely a ConfigMgr issue.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices

Inventory Management Cube 0ic_c03, 0StockType

In the Inventory Management Cube 0ic_c03 queries,I've found that 0StockType has descriptions that are misleading because of the way they are written in domain bstaus (R3 side), especially when seeing the key and SHORT description (truncated beyond meaning).
OK I can correct these by changing BStaus 's texts.
The main changes I'd do are for the Customer Consigment, Customer Return Packaging and Material Provided to Vendor descriptions.
But what does 0StockType 'blank' (or #) mean ?
(It seems to mean something like Valuated Stock Valuation and 'Not Defined' is not very good in a Query result)

Well, no one replied, but I got feedback from OSS. So just in case anyone is interested.....
I had to use r3 > se11 to change the domain descriptions myself.
Bstaus 'blank' I put as 'Valuation'
I also improved some of the Bsttyp descriptions whilst there

Queires on Non-Cumulative Inventory Management Cube 0IC_C03 Not Working

Hello all.
I am trying to use the 0IC_C03 Inventory Management cube with non-cumulative key figures. I followed the How to...Handle Inventory Management Scenarios in BW paper to a tee.
Steps I followed:
1. Ran initialization of beginning balance with 2LIS_03_BX
2. Ran the historical job with 2LIS_03_BF
3. Uploaded to BW the Initialization (BX) and compressed without setting the "No Marker Update" flag
4. Uploaded the historical movements (BF) and compressed setting the "No Marker Update" flag
Now, to this point, everything was fine. Quantities were as expected. Dollar values were as expected. The problem occurs once I load deltas:
5. Loaded delta for 2LIS_03_BF and compressed without setting the "No Marker Update" flag as instructed in the How To... paper
Query example:
MATERIALA:
Initial Stock Balance = 1000 EA
Delta had stock issue of 150 EA (so the stock balance should have decreased from 1000 to 850)
Now, I have the record in BW showing the stock issue of 150. However, the non-cumulative key figure within the query still shows 1000. And when I drill down by calendar day, I would expect the result to show 850, but it seems to add the 150 before taking it away resulting in 1000 which is actually the initial stock balance. It is like it is not recognizing the updates.
Any help would be appreciated.
Thanks,
Brent

Hi!
Here is what helped in my case, very similar to your:
In DTP for 2lis_03_bx (not only in infopackage, as it is said in manual!) you have to change "Extraction Mode" parameter to "Initial Non-cumulative for Non-cumulative values"

Requirement to get Inventory data at the Daily level (non-cumulative KF)

Hello All,
Kindly provide ur suggesstions on the issue mentioned below:
We require the Inventory data at a daily level. Also we require that the non-cumulatve Key Figures such as 0TOTALSTOCK, etc. be available to us in the BW itself, since this is required for further processing.
PS: Right now we are using RSCRM_BAPI to execute the qurey and store the data into a table, but it fails for non-cumulative keyfigures. Kindly suggest if ther are other ways which can suffice the requirement mentioned above.
Thank you.
Regards,
Kunal Gandhi

Another one?
You should read this link: https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement

Inventory management and physical inventory data transfer

hi all,
can anyone plz povide me with inventory management and physical inventory data transfer tutorial or link.
points are guarented.
rgds

The information behind the blue-button for MI34, MI38 (as you mentioned) does not have enough detail. It's basically one-page. Is there another instructional source available? How is the logical file MMIM_PHYSICAL_INVENTORY_DOCUMENTS tied to the physical, can you clarify? Not sure how to determine where the sequential file being processed needs to be located. Thanks!

Last Inventory Date update in Quant

Hi All,
We use Cycle counting in our warehouse and it is triggered by LICC. When a count is performed through LICC, it updates the last inventory date as the last count date.
It also happens that sometimes we count at Bin level, use LI01N and use inventory method as "CC". But after inventory, the last inventory record in the quant is updated with the current record, but the last inventory date is not updated.
Is there a note out there to fix this issue?
Thanks
Jithin

Yes i saw that, but since we are using LI01N with CC method, it should behave the same. I am not questioning what SAP does. It is how theoretically it should have been and how it is not.
On the same note, how is LX26 and LICC different.
You should understand that LI01N + CC and LX26 is cycle counting for storage bin whilst LICC is for quant.
If you are not satisfied with this I cannot help you (I cannot modify SAP and I think none of simple forum members can do this...), please contact SAP AG.
Regards,
Csaba
Edited by: Csaba Szommer on Apr 15, 2009 8:42 AM
Edited by: Csaba Szommer on Apr 15, 2009 8:49 AM

Weblogs: Cycle Count Inventory Date: From IM inventory date to WM inventory

Dear All,
I have updated new weblog on the common problem for physical inventory.
When any organization plans to go for implementing the warehouse management; it has major concern about the physical inventory process, particularly last physical inventory date.
More details are available on this weblogs:
/people/community.user/blog/2007/10/04/cycle-count-inventory-date-from-im-inventory-date-to-wm-inventory-date
<b>Your feedback/comments are most welcome, <u>Please write on the weblog page, not in this thread.</u></b>
Regards
Arif Mansuri

Dear All,
Here is my previous weblog, Your comments will work as tonic for me ), so leave your comment on both of these blogs.
/people/community.user/blog/2007/05/04/physical-inventory-in-material-management
Enjoy SAP..
Regads
Arif Mansuri

Inventory data cube ?

Similar Messages

Maybe you are looking for