Inventory data load issue
HI all,
We have 2 source system SAP4.7 and ECC6.0. I am using 3 data source BX, BF and UM.
one year data we required from SAP4.7 and all data from ECC6.0.
In SAP4.7 totally 7 years data available but we required only last one year. my doubt is if i extract last one year data weather in my report OPENING STOCK and CLOSING STOCK show correctly?
- SAP4.7 closing stock will be opening stock in ECC6.0 like the manner they will upload in source system.
Getting data from two source system, what is the extraction steps i have to follow.
Kindly give me yr suggestion.
Thanks
sara
Hi,
First you need to make sure the closing stock of R/3 4.7 is matching with the ECC 6.0 opening stock. It should be same, usually when the data cut over happens this will be addressed. you can cross check the same using T code - MB5B / MB52 etc.
When you load the data using BX source, it is a full load one, it will be pulling the data for as on date. So it will be brining the data only from the ECC 6.0 system being connected and there wont be any issue with the data.
BF - will bring the material movement, which is needed if you need to see the historic data. So do the loading in the normal manner. Split the load depending up on the data volume. While doing the set up table activity in 4.7 select only the needed period. do the same for the UM data source also.
While setting up the delta, do it only for 6.0.
Regards
Similar Messages
-
Data Load Issue "Request is in obsolete version of DataSource"
Hello,
I am getting a very strange data load issue in production, I am able to load the data upto PSA, but when I am running the DTP to load the data into 0EMPLOYEE ( Master data Object) getting bellow msg
Request REQU_1IGEUD6M8EZH8V65JTENZGQHD not extracted; request is in obsolete version of DataSource
The request REQU_1IGEUD6M8EZH8V65JTENZGQHD was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
I have taken the follwoing action
1. Replicated the data source
2. Deleted all request from PSA
2. Activated the data source using (RSDS_DATASOURCE_ACTIVATE_ALL)
3. Re transported the datasource , transformation, DTP
Still getting the same issue
If you have any idea please reply asap.
SamitHi
Generate your datasource in R/3 then replicate and activate the transfer rules.
Regards,
Chandu. -
I am having an issue where the data that drives a tilelist
works correctly when the tile list is not loaded on the first page
of the application. When it is put on a second page in a viewstack
then the tilelist displays correctly when you navigate to it. When
the tilelist is placed in the first page of the application I get
the correct number of items to display in the tilelist but the
information the item renderer is supposed to display, ie a picture,
caption and title, does not. The strange thing is that a Tree
populates correctly given the same situation. Here is the sequence
of events:
// get tree is that data for the tree and get groups is the
data for the tilelist
creationComplete="get_tree.send();get_groups.send();"
<mx:HTTPService showBusyCursor="true" id="get_groups"
url="[some xml doc]" resultFormat="e4x"/>
<mx:XMLListCollection id="myXMlist"
source="{get_groups.lastResult.groups}"/>
<mx:HTTPService showBusyCursor="true" id="get_tree"
url="[some xml doc]" resultFormat="e4x" />
<mx:XMLListCollection id="myTreeXMlist"
source="{get_tree.lastResult.groups}"/>
And then the data provider of the tilelist and tree are set
accordingly. I tried putting moving the data calls from the
creation complete to the initialize event thinking that it would
hit earlier in the process and be done by the time the final
completion came about but that didn't help either. I guess I'm just
at a loss as to why the tree works fine no matter where I put it
but the TileList does not. It's almost like the tree and the
tilelist will sit and wait for the data but the item renderer in
the tilelist will not wait. Which would explain why clicking on the
tile list still produces the correct sequence of events but the
visual component of the tilelist is just not working right. Anyone
have any ideas?Ok, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.
-
Hi All,
I am new to BI and I have dought about inventory data loads u201Ccan I load BF data source with out loading BX data source and compress with marker update? Yes or NO; if yes justify reasons.
Regards,
KrishHi,
Read the document "How to handle Inventory Management Scenarios in BW (NW2004)" at http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328?quicklink=index&overridelayout=true
This will clear all your doubts. -
I am new to Demantra. Have installed a stand alone Demantra system in our server. In order to load data, I created a new model, defined item and location levels, then clicked on 'Build Model'. The data is loaded into 3 custom tables created by me. After creating the model, I cannot login to 'Collaborator Workbench', it gives message 'There are system errors. Please contact your System Administrator'. Can anyone please tell me what I am doing wrong and how to resolve the issue.
ThanksOk, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.
-
Inventory data load from Inventory Cube to another Copy Cube
Hello Experts,
I am trying to load Inventory data from the Inventory cube(say YCINV) to a copy cube say YCOPY_CINV(copy of Inventory cube), but the results appear inconsistant when I compare the reports on these 2 cubes. I am trying to populate a fiield in copy cube so that I can populate the same data back to the original cube with the new field in it, I am doing this reload back and forth for historical data purpose only.
I have seen lot of posts as how to run the setups for Inventory data, but my case does not need to perform set up runs.
Does the note 1426533 solve the issue of loading from one cube to another ? we are on SAP BI 7.01 with SP 06 ,but the note specifies SP 07 ?
I have tried note 375098 to see if it works, but I do not see the options as mentioned from step "Using DTP (BW 7.x)" in BI to perform this note
Please advise on whether to go with implementing note 1426533 or is there any other way to load inventory data from one cube to other.
Regards,
JBHi Luis,
Thanks for your reply,
I do not see any setting like Intial stock in DTP except "initial non-cumulative for non- cumulative". I did try using the option "initial non-cumulative for non- cumulative" ,but the results still do not match with the inventory cube data.I do not see the check box for marker in the copy cube (under roll up tab). Please let me know if we can really implement this solution ,i.e. copying from inventory cube to copy cube and then re-loading it back to inventory cube for historical data. Currenlty, I am comparing the queries on these 2 cubes, if the data matches then I can go ahead and implement it in Production, other wise it would not be wise to do so .
Regards,
JB -
Error in 0EMPLOYEE Master Data Load Issue
Hi,
We have 0EMPLOYEE Master Data. Due to our new development changes ralted to 0EMPLOYEE, we have scheduled 2 new info packages with Personnel number range. While creation of infopackages, we forget to main time interval from 01.01.1900 to 31.12.9999. Instead of this, the default range was selected as 24.04.2009 to 31.12.9999. Because of this selection in InfoPackage, the Employee Master Data Valid from date was changed to 24.04.2009 for all the employees in the master data after the data load.
Even after i change this selection properly and loading the data also, its not correcting with correct valid from dates.
Can you please advice, how can we fix this issue ASAP as its a production issue?
Thanks!
Best regards,
Venkata> Even after i change this selection properly and loading the data also, its not correcting with correct valid from dates.
May be for this you have the ONLY option to delete 0Employee master data and reload it again. For this you need to delete dependent transaction data also.
Cheers,
Sree -
Hi gurus,
Presently i am working on BI 7.0.I have small issue regarding master data loading.
I have generic data soruce for master data loading.i have to fetch this data to BW side.Always i have to do full data load to the master data object.first time i have scheduled info package and run DTP to load data to master data object, no issues, data got loaded successfully.whenever i run infopacage for second time and run DTP i am getting error saying that duplicated records.
How can i handle this.
Best Regards
PrasadHi Prasad,
Following is happening in your case:
<b>Loading 1st Time:</b>
1. Data loaded to PSA through ipack.It is a full load.
2. data loaded to infoobject through DTP.
<b>Loading 2nd Time:</b>
1. Data is again loaded to PSA. It is a full load.
2. At this point, data in PSA itself is duplicate. So when you are running the DTP, it picks up the data of both the requests that were loaded to PSA. And hence, you are getting the Duplicate record error.
Please clear the PSA after the data is loaded to infoobject.
Assign points if helpful.
Regards,
Tej Trivedi -
Data Loading issues in PSA and Infocube
Hi team,
i am loading data into PSA and from there into info cube via a DTP,
when i load data into PSA all 6000 records are transfered to PSA and process is completed sucessfully,
When i execute the DTP to load data into info cube the data load process is completed sucessfully but when i observe
the "manage" tab i see
"Transferred 6000 || Added Records 50"
i am not able to get as why only 50 records are loaded into infocube and if some records are rejected where can i find them and the reason for that,
kindly assist me in understanding this issue,
Regards
bshi,
The records would have got aggregated based on common values.
if in source u had
custname xnumber kf1
R 56 100
R 53 200
S 54 200
after aggregation u will have
custname kf1
R 300
S 200
if u do not have xnumber in your cube.
Hope it is clear now.
Regards,
Rathy -
Hi all,
i have some issue with DSO data load , while loading the data data comming to psa perfectly 238 ware comes, but when i trigger that DTP, i am getting only 6 records.
Please any one suggest me.
Thanks,
Gayatri.Hi Gayatri,
if you have already loaded some data to DSO & now if you are trying to do Delta, it is possible that it is taking only Delta Data??
(or)
If you have any Start/End routines/Rule Routines written for deleting any records based on some conditions.
(or)
Also It depends on the keyfield you have selected in the DSO. If the keyfield which you have selected is having some repeated values, then while loading into DSO, it will be aggregated i.e if you have 10 rows for keyfield with value say 101, then in the DSO it will be loaded with only one row with value 101 (10 rows becoming 1 row) & with the keyfigure either Summation/Overwritten depending on what you have selected in the rule details for the keyfigure(you can check it by right click on Keyfigure mapping> Rule Details> here you can see whether it is Overwrite/Summation).
Also as mentioned in above posts you can check the DSO --> manage --> Check the number of rows transferred & number of rows added.
Hope it is clear & helpful!
Regards,
Pavan -
0HR_PY_PP_2 - data load issue
We have 0HR_PY_PP_2 which pulls deltas weekly. On 29th of June the data load failed with error posting runs are locked, try the transfer again. So we did repeat delta. The load was successful but it got 0 records. But the R/3 guys said there was data. When the chain ran next week i.e. on 6th July, it got all the data including the data which was supposed to be brought in the previous weeks load. Did any one face such an issue. We do not understand what could be the problem.Can some one please help.
Thank you!You should have run a normal delta run (no repeat delta) instead for
the following reason:
When you run the extractor in a situation when posting data is
still locked (by the actual posting process), the extractor stops
extraction immediately before it calculates any record and
puts it to the delta queue. However, a "repeat delta" run is a process,
that simply takes whatever it finds in the delta queue for the
specific extractor as the result of the last delta run, and resends
all these records to BW. It does not even invoke the application
specific extraction logic again. In this specific situation
this means, that 0 records are sent again and the timestamp is not
touched.
In other words, the correct procedure after a detection of a lock
of the posting data is to run a regular delta again when posting
has been finished."
regards,
Colin Moloney -
BI 7.0 data load issue: InfoPackage can only load data to PSA?
BI 7.0 backend extraction gurus,
We created a generic datasource on R3 and replicated it to our BI system, created an InfoSource, the Transformation from the datasource to the InfoSource, an ODS, the transformation from the InfoSource to the ODS.
After the transformation creation between the InfoSource and the ODS is done on this BI system, a new folder called "Data Transfer Process" is also created under this ODS in the InfoProvider view. In the Data Transfer Process, in the Extraction tab, picks 'Full' in the field Extraction Mode, in the Execute tab, there is a button 'Execute', click this button (note: so far we have not created InfoPackage yet) which sounds like to conduct the data load, but find there is no data available even if all the status show green (we do have a couple of records in the R3 table).
Then we tried to create an InfoPackage, in the Processing tab, find 'Only PSA' radio button is checked and all others like 'PSA and then into Data Targets (Package by Package)" are dimmed! In the Data Target tab, find the ODS as a target can't be selected! Also there are some new columns in this tab, 'Maintain Old Update Rule' is marked with red color 'X', under another column 'DTP(S) are active and load to this target', there is an inactive picture icon, that's weird since we have already activated the Data Transfer Process! Anyway, we started the data load in the InfoPackage, and the monitor shows the records are brought in, but since in the Process tab in the InfoPackage, 'Only PSA' radio button is checked with all others dimmed that there is no any data going to this ODS! Why in BI 7.0, 'Only PSA' radio button can be checked with others all dimmed?
Many new features with BI 7.0! Any one's idea/experience is greatly appreciate on how to load data in BI 7.0!You dont have to select anything..
Once loaded to PSA in DTP you have the option of FULL or DELTA ,full loads all the data from PSA and DELTA loads only the last load of PSA.
Go through the links for Lucid explainations
Infopackage -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03808225cf5167e10000000a1553f6/content.htm
DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Creating DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
<b>Pre-requisite-</b>
You have used transformations to define the data flow between the source and target object.
Creating transformations-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Hope it Helps
Chetan
@CP.. -
DATA LOAD ISSUE /NO ROLL UP MEMORY
Hello Team,
I have this master data load failure for FIS_BELNR. The problem which I think that everytime it tries to load it runs out of internal table space in the backend. I really don't know what it means. This data is been failing everyday because of the same problem.
I have attached all the screen shots and ABAP short dump analysis screen shots as well. One can read in details why is it failing it tells exactly what the problem is , but how to fix it.
Any more details needed please let me know.
ABAP runtime errors TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Occurred on 25.10.2007 at 02:53:55
>> Short dump has not been completely stored. It is too big.
No roll storage space of length 2097424 available for internal storage.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
What can you do?
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
abap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
Parameters for background processes:
hat can you do?
ry to find out (e.g. by targetted data selection) whether the
ransaction will run with less main memory.
f there is a temporary bottleneck, execute the transaction again.
f the error persists, ask your system administrator to check the
ollowing profile parameters:
ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
bap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
arameters for background processes:
Error analysis
The internal table "IT_62" could not be enlarged further.
You attempted to create a block table of length 2097424 for the internal
table "IT_62". This happens whenever the OCCURS area of the internal table
is exceeded. The requested storage space was not available in the roll
area.
The amount of memory requested is no longer available.
How to correct the error
Please try to decide by analysis whether this request is
reasonable or whether there is a program error. You should pay
particular attention to the internal table entries listed below.
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 2595024
Extended memory (EM)........... 2001898416
Assigned memory (HEAP)......... 1886409776
Short area..................... 16639
Paging area.................... 24576
Maximum address space.......... "-1"
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"TSV_TNEW_BLOCKS_NO_ROLL_MEMORY"
"SAPLZ_BW_EXTRACTORS " or "LZ_BW_EXTRACTORSU24 "
"Z_BW_AP_GL_BELNR"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
ThanksHello,
The memory of your internal table wants beyond the system configured threshold.
Decrease your package size or extend the mentioned parameters (basis task):
ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
abap/heap_area_total (100.000.000 - 1.500.000.000)
Regards, Patrick Rieken -
Hello All,
We had an EPMA Type HFM application whose all dimensions were local, The application validated and deployed successfully.
We tried loading data into the HFM application and the data load was successful.
Then we decided to convert all of the local dimension of the above mentioned HFM application as shared dimensions. After converting all the dimensions as shared dimension successfully we are getting error while loading data into the same HFM application (The app does validate and can be deployed after changes)
The Error log is below:
Load data started: 11/29/2014 10:53:15.
Line: 216, Error: Invalid cell for Period Oct.
ACTUAL;2014; Oct; YTD; E_2100;<Entity Currency>;89920000; [ICP None]; CORP; [None]; [None]; FARM21000;11979
>>>>>>
Line: 217, Error: Invalid cell for Period Nov.
ACTUAL;2014; Nov; YTD; E_2100;<Entity Currency>;89920000; [ICP None]; CORP; [None]; [None]; FARM21000;23544
>>>>>>
Line: 218, Error: Invalid cell for Period Dec.
ACTUAL;2014; Dec; YTD; E_2100;<Entity Currency>;89920000; [ICP None]; CORP; [None]; [None]; FARM21000;58709
>>>>>>
Line: 219, Error: Invalid cell for Period Oct.
ACTUAL;2014; Oct; YTD; E_2100;<Entity Currency>;28050000; E_6000_20; [None]; [None]; [None]; FARM21000;-11979
>>>>>>
Line: 220, Error: Invalid cell for Period Nov.
ACTUAL;2014; Nov; YTD; E_2100;<Entity Currency>;28050000; E_6000_20; [None]; [None]; [None]; FARM21000;-11565
>>>>>>
Wanted to know whether there is something I might have missed while converting local dimension into shared (If there is any sequence to do so,or any constraint that I may not be aware of, though the conversion looks good as application is validated and deployed after changes)
What can be the reason for the failed data load, can anyone help?
Thanks
ArpanHi,
I would look at the account properties for that account (89920000) and see the TopCustom1...4Member. You will find the reason behind the invalid cells.
When you convert the local dimensions to shared, have you checked the 'Dimension Association' for Accounts and Entitities?
It does seem to lose the dimension association if a proper sequence is not followed.
Regards,
S -
Custom object - data loader issue
Hello guys.
I've just attempted to upload a CSV file in order to insert new records to a custom object.
after some tweaking I've managed to get it to work, the log stated 100% success but no new records appeared.
I've ran the data loader for "ordinary" objects (account, parts) with full success.
Any thoughts?
Thanks,
Adi Smulian
[email protected]The dataloader will often state 100% this does not mean that all the records were imported correctly. You will need to go to the data import queue to retrieve the findings of the import this will then tell you if you have any errors.
Maybe you are looking for
-
XREF3 field not getting populated in BSEG table while posting MIRO
Hi, I have one query in MIRO tcode.I have activated xref3 field in MIRO tcode using enhancement LMR1MF6Q.Now when i try to post document with some values in xref3 field on screen ,value is not getting populated in BSEG table.Please tell me what
-
APP STORE (APPS INSTALLATION PROBLEM IN IPHONE 5s)
I am using iphone 5s 16 gb, i have been facing the issue in app store, every other app I try to install free on my iphone 5s, I get the "App could not be purchased at this time" box. After that the app store shows a the circling progress indicator ro
-
Anyone get answers from apple support or retail stores about the mooing?
i did a 'repair permissions' on my macbook and have not heard the mooing since but then again i have not used it much since then either. has anyone had apple support or a retail store address this issue directly?
-
Language Installation Questions
Good Afternoon Experts, I need to import Rumanian Language to my system. In SAP Library i have information on how to do so. What i can't find is information concerning the requirements regarding disk space and dbspace... I need to know the aproximate
-
Sound blaster X-Fi surround 5.1
HI, I recently bought Creative Sound Blaster X-FI surround 5. for my Inspire M4500 (4.) speakers. I am using Dell Inspiron 545 laptop with Vista 32 bit Operating system. With sound card, they gave me the Y splitter cable and i connected the front spe