Inventory Database files
Hi everyone,
I just came onboard a new job that has not been using ZENworks to its full advantage. They are currently only using it for remote control/view. Currently I am trying to setup their inventory database, but they do not have any of their original discs. I was wondering if anybody had the file p1mssqlinvdb.zip??? It is located on the ZENworks 6.5 Companion 2 CD\database\mssql directory , if at all possible could someone send me that file or let me know where I can get it??
Thanks in advance!!
On Wed, 14 May 2008 12:36:03 GMT, mosa wrote:
> , if at all
> possible could someone send me that file or let me know where I can get
> it??
hmm, is the download of 6.5 sp2 not available anymore?
Marcus Breiden
If you are asked to email me information please remove the - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.didas.de
Similar Messages
-
Probable BUG found in Sybase Inventory database
Hi All,
(Sure is quiet around here - must be because ZDM 7 is so stable...)
So I have been having inventory database issues. Random but inevitable
database failures - eg "assertion failed 201425" (and other numbers that I
cannot locate at the moment), "mgmtdbs.db is not a valid database file" on
starting the sybase database. Etc.
Long troubleshooting story short: it appears that the sybase.nlm application
cannot handle nss volumes that are large. In my case it fails if I try to
run it on a 3.6TB or 5TB volume, but succeeds if I run it on small volumes -
20GB to 65GB. Also the database was running fine on a 1.8TB volume - the
problems began when I virtualized the server (on ESX 3.5u4) and moved the
volume from direct-attached scsi storage to network-attached CoRAID (AoE)
storage AND expanded the volume to 3.6TB.
To test my theory I ran the database on two other servers and 3 other
volumes. In all cases success came when the hosting volume was small -
didn't matter if the host volume was direct attached or on a physical server
as opposed to a virtual server.
So if you are having inventory database problems, try moving the database to
volume that is small - I suspect the magic breaking point is 2TB which just
happens to be the maximum size of an NSS partition...and wasn't that also
the max size of an NSS volume sometime in the past? Maybe the sysbase
engineers were working in such an environment when they wrote the
nlm...after all it has been 4 years since it was last modified (I am running
v8.00.03, Nov 30 2005) and even longer since it was originally written.
Anyways, the reason it fails is not so important. There is a workaround and
a long term solution as well - move to ZCM 10.whatever-is-good ;-)
Cheers,
Ron Neilly
UBC Okanagan
PS If you have any evidence to back me up - or to disprove me - please
share!Isn't it funny how once unfathomable disk sizes are now not that unusual?
My guess is you are correct and if an SR was created on the issue Novell
would likey raise the matter to Sybase for investigation.
(Clearly this sounds as if its a bug and would be refunded.)
But I think it's unlikely that it would be fixed even if verified since the
NLM is already so old.
While you have simple work-arounds, It is possible that the Windows and
Linux versions of Sybase that come with ZDM don't have this issue.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"Ron Neilly" <[email protected]> wrote in message
news:[email protected]...
> Hi All,
> (Sure is quiet around here - must be because ZDM 7 is so stable...)
>
> So I have been having inventory database issues. Random but inevitable
> database failures - eg "assertion failed 201425" (and other numbers that I
> cannot locate at the moment), "mgmtdbs.db is not a valid database file" on
> starting the sybase database. Etc.
>
> Long troubleshooting story short: it appears that the sybase.nlm
> application
> cannot handle nss volumes that are large. In my case it fails if I try to
> run it on a 3.6TB or 5TB volume, but succeeds if I run it on small
> volumes -
> 20GB to 65GB. Also the database was running fine on a 1.8TB volume - the
> problems began when I virtualized the server (on ESX 3.5u4) and moved the
> volume from direct-attached scsi storage to network-attached CoRAID (AoE)
> storage AND expanded the volume to 3.6TB.
>
> To test my theory I ran the database on two other servers and 3 other
> volumes. In all cases success came when the hosting volume was small -
> didn't matter if the host volume was direct attached or on a physical
> server
> as opposed to a virtual server.
>
> So if you are having inventory database problems, try moving the database
> to
> volume that is small - I suspect the magic breaking point is 2TB which
> just
> happens to be the maximum size of an NSS partition...and wasn't that also
> the max size of an NSS volume sometime in the past? Maybe the sysbase
> engineers were working in such an environment when they wrote the
> nlm...after all it has been 4 years since it was last modified (I am
> running
> v8.00.03, Nov 30 2005) and even longer since it was originally written.
>
> Anyways, the reason it fails is not so important. There is a workaround
> and
> a long term solution as well - move to ZCM 10.whatever-is-good ;-)
>
> Cheers,
>
> Ron Neilly
> UBC Okanagan
>
> PS If you have any evidence to back me up - or to disprove me - please
> share!
> -
This probably sounds stupid, but I'm looking for a way to just dump the
current ZEN7 Inventory Database and start it from scratch.
There's so much garbage workstation information in there, and I'm not at
all interested in querying the results, then filtering, purging, etc.
I want to blow it away, then start it from scratch. Is there a quick TID
on how to do this? Or am I manually deleting objects and then reinstalling
the Inventory portion of ZENworks?
Thanks for any help,
BrianJust to follow-up, I had to install the ZEN 7.0 SP1 R2 anyway so I renamed
the old ZENworks folder that held all the ZEN database files. It let me
rename with no issues.
I kept the same settings and told it to install to the same volume as it
did before, so it simply created a new "Zenworks" folder and added all the
database files in there.
I went to run a report and it only contained like 4 workstations and all
the other ones were gone so that seemed to do the trick just fine. It's
been building perfectly and everything is looking great. Thanks again for
your help.
Marcus Breiden <[email protected]> wrote in
news:11b9cxqg8vxf3$.[email protected]:
> On Mon, 10 Mar 2008 15:38:37 GMT, Brian Binder wrote:
>
>> Thanks Marcus, I'm going to look into it a bit further but it sounds
>> like it's the way to go for my scenario ;)
>
> You are welcome -
Appleworks takes 1.5 minutes to save database file
Why does my database file take so long to save information? I have added small thumbnail images to my art inventory and since then it takes what seems like an eternity to save. Is there any way i can speed it up?
You've probably answered your own question when you said:
I have added small thumbnail images to my art inventory
Images, even thumbnails, take up a lot of room. If the images are anything except PICT, they'll increase the file size even more.
Even so, a minute still seems long, so there might be a couple of other factors at work. Databases, especially those with multimedia fields, are more prone to corruption than any other AppleWorks file type. It is worth have multiple backups of your database at all times to fall back on if needed. Second, it could be a simple as a full Recent Items folder. See Dale Gillard's user tip,
AppleWorks slow? Spinning ball appears?, should help. -
I've been trying to install ZDM services on a OES2 server and have been having all sorts of trouble. After numerous reinstalls, I've decided to install the parts one at a time until I found what wasn't working, and it ends up being the Inventory Database. I have performed a new install of the Inventory Database only, it creates the object in ConsoleOne, I can configure the properties of it, but when I try to do the Tools->Zen Inventory-> Configure DB, I keep getting a message saying that it is unable to connect, check database properties and make sure that it is running.
The only property that I have changed is changing the server name from DNS address to IP address, nothing else. I've checked the services on the server and novell-zdm-sybase is running, but I'm not seeing any log files in /var/log/novell/zenworks, only the logs from installation. Any ideas at where I should be looking next? Thanks!They are running, and all of the services that I have installed are also running, but I still get the error. I have noticed that when I have a clean install with only OES2 and ZDM everything works, but I also want to have GWMobile on the same server and that is usually where I run in to trouble. The only changes that I've made is the apache listen.conf file to different ports so that GWMobile works on the server, but after installing ZDM I get a "cannot contact relay server" from the localhost when I try to access the login page, but that is another issue. It seems like I can either install GWM or ZDM on the server it is fine, but they don't seem to get along together. Any ideas for something else to check would be great. Thanks!
Originally Posted by kesselaar
Could you verify the following processes are running
/etc/init.d/novell-zdm-inv status
/etc/init.d/novell-zdm-sybase status
/etic/init.d/novell-zfs status
/etc/init.d/novell-zmd status
also try running /opt/novell/zenworks/bin/ZDMstart and ZDMstop
Regards, Arnoud -
I'm running ZFD32 SP3 on a 51SP7 server. To sync the inventory database
with the nds one I ran startser ndslookupfordb which ran fine and created
a lok file. When I ran the dbdelete command and looked at the log, I found
that there were about 10 entries that resembled the following...
1020: workstation <WS object name> not deleted because it is corrupted in
the database...wsid=0.
Any ideas on how to remove these corrupted workstation objects from the
database would be greatly appreciated.
Allen Jackson.Jacksona,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Unable to connect to inventory database ??
Hi,
Thanks for reading this post. I have a problem with ZFD3.2 inventory
that
is driving me crazy ... I have a Inventory system set up at one of our
customers with Netware 6 servers ZFD3.2 and an inventory database on Oracle. All systems are working. I see that the storer is updating
files
in the database. Now I want to do an Inventory query from ConsolOne. I
go
to a workstation of the customer and start ConsoleOne. I do tools-
configureDB and get an error message saying "Unable to connect to the
inventory database - Check if database is up and running". Next I take
my
own laptop and do the same thing. It works, I see "succesfully
connected
to the database". OK, so I copy the ConsoleOne from my laptop to the customer's computer. Same error... So there must be something on my
laptop
that's not on the customers computer. But what ?? What am I missing
here ?
regards, RenHi Kai,
Sorry for the delayed answer. My cable internet provider decided he
had
provided enough internet and my connection was gone for two days...
I have tried to run it from the server but this made no difference. It
seems
to be related to the workstation you run ConsoleOne on. I've always
thought
that it was only depended on the snapins, but it seems that there's
more to
it..... I've tried windows2000 and windows XP prof with clients 4.83,
4.83
SP1, and 4.83 sp2.
When I run the consoleone copy on my laptop (winxp prof with cl 4.83)
it
works fine, but when I copy the consoleone directory to another
workstation
I get an error.
regards, Ren
"Kai Reichert" <[email protected]> schreef in bericht
news:d8yBa.354$[email protected]..
> Rene,
> does it work for your customer when he runs the consoleone from the> servers patch instead from the local copy ?
>
> --
> Regards, Kai Reichert
> Novell Support Forums Sysop
>
> "Generosity. Be generous with your time, with your love, with your
life.
> .. Be generous, always."
> Mark Greene in "On the Beach" -
ATT IMEI no in their inventory database
i contact to att suport by request unlock, but they say it IMEI no in their inventory database, but i used this phones only on ATT sim card only, other sim card not work. Phones has repaired by apple. Please need advese.
On Wed, 14 May 2008 12:36:03 GMT, mosa wrote:
> , if at all
> possible could someone send me that file or let me know where I can get
> it??
hmm, is the download of 6.5 sp2 not available anymore?
Marcus Breiden
If you are asked to email me information please remove the - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.didas.de -
While generating a crystal report can we edit database files in field explorer ?
Hi,
while generating a crystal report can we edit database files in field explorer (at middle can we edit database fields)
Regards,
MahendraWrong forum to post the question, try to post the question in crystal reports community.
Its not possible to edit the database fields while creating the reports, its only used to call the rows of values in it. Can you explain me in detail what are you actually looking for .
--SumanT -
Hello.(sorry for my english)
I have a legacy system , ported to opencobol that uses Berkeley DB. I can successfully open the database files using java both in windows and linux. However i want to create a web front end for the application.
Data is stored using strange cobol structures (most numbers are stored as text or 4 bits per digit) and other fancy stuff.. so custom parsers should be written. (dont rember BDB classes name for that)
I have been reading the documentation of Berkeley DB 12 hours totaly today but couldnt find answers to some questions...
Is it possible to attach the database to dbsql.exe (sqlite) server ?? I tried to do "attach "..pathtofile" as NULL ,but i get multiple databases specified and not supported and other stupid messages....
I think that what i tried propably doesnt make sense as collumns arent specified and nothing is in order this thing to work ..It is a simple Key value database.
So i am a little stucked here.
The only solution i can think is to synchronize with a relational Database. But i dont have triggers or nothing that helps....
Note that i want one way synchronization. The "other way" will have very limited tasks.
It seems to me that checking every x minutes if something changed using a cursor is a demanding task. So i am wondering.. Is there a way to track changes???
Thank you :)
Edited by: 843912 on 12 Μαρ 2011 7:13 μμHello,
I am not sure I completely understand your question. If you are asking about importing
and exporting data from a Berkeley DB database into an Oracle DB Table in Berkeley DB
releases prior to 5.*, then this can be done with the Oracle OCI interface. If I am
misunderstanding the question, please let me know.
Thanks,
Sandra -
Finding whole mapping from database file - filesystems - logical volume manager - logical partitions
Hello,
Trying to make reverse engeneering of database files and their physical carriers on logical partitions ( fdisk ).
And not able to make whole path from filesystem down to partitions with intermediate logical volumes.
1. select from dba_data_files ...
2. df -k
to get the listing of filesystems
3. vgdisplay
4. lvdisplay
5. cat /proc/partitions
6. fdisk /dev/sda -l
fdisk /dev/sdb -l
Problem I have is that not able to determine which partitions are consisten in logical volumes. And then which logical volumens are consisted in filesystem.
Thank you for hint or direction.Hello Wadhah,
Before start the discussion let me explain I am newcommer to Oracle Linux. My genetic with dba experience of Oracle is from IBM UNIX ( AIX 6.1 ) and Oracle 11gr2.
First task is to get the complete picture of one database on Oracle Linux for future maintenance tasks and make database more flexible and
preparing for more intense work:
-adding datafiles,
-optimize/replace archive redolog files on separated filesystem from ORACLE_BASE
- separating auditing log files from $ORACLE_BASE to own filesystem
- separating diag directory on separated file system ( logging, tracing )
- adding/enlarging TEMP ts
- adding/enlarging undo
- enlarging redo for higher transaction rate ( to reduce number of switched per time perceived in alert_SID.log )
- adding online redo and control files mirrors
So in this context try to inspect content of the disk space from the highest logical level in V$, DBA views down to fdisk partitions.
The idea was to go in these steps:
1. select paths of present online redo groups, datafiles, controlfiles, temp, undo
from V$, dba views
2. For the paths got from the step 1
locate filesystems and for those filesystems inspect which are on logical volumens and which are directly on partitions.
3. For all used logical volumes locate the logical partitions and their disks /dev/sda, /dev/sdb, ... -
How to query a database file on my hard drive?
Hi,
I have a filer called "server.dbs" on my hard drive. It is a database file. I use a simple program that allows you to view databases, and it loads up and I can traverse the database and see all the entries as any standard database.
So I figured that Java's ability to handle SQL would allow me to make a standard SQL statement querying the database, and be able to get the results. The software stores servers in SID fields, and the value is the port the server runs on. I want to make a simple query to select a server by SID, and print the port in which that server is running on.
So is there any way to, via my java application, load a database from a file (rather than a url) which has no authentication required, and simply make my queries directly to that file? If so, how?
Thanks!
-JoshNormal database access is via JDBC.
http://java.sun.com/docs/books/tutorial/jdbc/index.html
To use that JDBC driver is needed to access the database. Databases in wide usage all have one. It isn't clear from your posting that you have a common database though. -
ORA-01122: database file 8 failed verification check
trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Apr 29 17:57:51 2014
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.73)
B New connection 0 created
M sysno 00
M sid DEV
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 2816
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2816) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=2600/8/208056/208064
M DpShMCreate: sizeof(file_adm) 208064 (72)
M DpShMCreate: sizeof(vmc_adm) 18720 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 08750040, size: 4880152)
M DpShMCreate: allocated sys_adm at 08750040
M DpShMCreate: allocated wp_adm at 08751E40
M DpShMCreate: allocated tm_adm_list at 087565C0
M DpShMCreate: allocated tm_adm at 087565F0
M DpShMCreate: allocated wp_ca_adm at 08B25890
M DpShMCreate: allocated appc_ca_adm at 08B2B650
M DpShMCreate: allocated comm_adm at 08B2D590
M DpShMCreate: allocated file_adm at 08BAE450
M DpShMCreate: allocated vmc_adm_list at 08BE1110
M DpShMCreate: allocated gw_adm at 08BE1150
M DpShMCreate: allocated vmc_adm at 08BE1180
M DpShMCreate: allocated ca_info at 08BE5AA0
M DpShMCreate: allocated wall_adm at 08BE5AA8
M DpSesCreateTable: attached session table at 06440040 (len=138424)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X
X Tue Apr 29 17:57:52 2014
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcInit2: o.k.
M
M Tue Apr 29 17:57:53 2014
M ThInit: running on host sapecc6
M
M Tue Apr 29 17:57:54 2014
M calling db_connect ...
C Prepending D:\usr\sap\DEV\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06C34308 06C398A4 06C3912C
C Attaching to DB Server DEV (con_hdl=0,svchp=06C39078,svrhp=06C4A944)
C Starting user session (con_hdl=0,svchp=06C39078,srvhp=06C4A944,usrhp=06C979A8)
C
C Tue Apr 29 17:57:55 2014
C Now '/@DEV' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=06C39078,usrhp=06C979A8)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06C34308 06C398A4 06C3912C
C Starting user session (con_hdl=0,svchp=06C39078,srvhp=06C4A944,usrhp=06C979A8)
C Now 'SAPSR3/<pwd>@DEV' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance DEV is running on SAPECC6 with ORACLE version 10.2.0.2.0 since 20140429
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20140429 175754 SAPECC6
M db_connect o.k.
M ICT: exclude compression: *.zip,*.cs,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.js,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif
M ThVmcSetParam: switch vmcj/vm_auto_restart 0 -> 0 sec
J
J Tue Apr 29 17:57:57 2014
J extMemCheck is set to disp+work.ThVmcMemCheck(thxxvmemu.c:2756)
J extGcMemReserve is set to disp+work.ThVmcGcMemReserve(thxxvmemu.c:2587)
J extGcMemCommit is set to disp+work.ThVmcGcMemCommit(thxxvmemu.c:2624)
J extGcMemFree is set to disp+work.ThVmcGcMemFree(thxxvmemu.c:2643)
J extCreateSharedCodeCache is set to disp+work.ThVmcSharedCodeCacheCreate(thxxvmemu.c:1941)
J extSetSharedCodeCachePerm is set to disp+work.ThVmcSharedCodeCacheSetPerm(thxxvmemu.c:2019)
J extMalloc is set to disp+work.ThVmcMallocDispatcher(thxxvmemu.c:2070)
J extCalloc is set to disp+work.ThVmcCallocDispatcher(thxxvmemu.c:2097)
J extRealloc is set to disp+work.ThVmcReallocDispatcher(thxxvmemu.c:2124)
J extFree is set to disp+work.ThVmcFreeDispatcher(thxxvmemu.c:2149)
J extAddResourceToHeap is set to disp+work.ThVmcAddResourceToHeap(thxxvmemu.c:2662)
J extRemoveResourceFromHeap is set to disp+work.ThVmcRemoveResourceFromHeap(thxxvmemu.c:2688)
J extGetLocalMemory is set to disp+work.ThJGetLocalMemory(thxxvmemu.c:2833)
J extGetLocalMemoryPeak is set to disp+work.ThJGetLocalMemoryPeak(thxxvmemu.c:2845)
J extGetLocalAllocatedMemory is set to disp+work.ThJGetLocalAllocatedMemory(thxxvmemu.c:2857)
J extGetGlobalMemory is set to disp+work.ThJGetGlobalMemory(thxxvmemu.c:2902)
J extGetGlobalMemoryPeak is set to disp+work.ThJGetGlobalMemoryPeak(thxxvmemu.c:2914)
J extGetGlobalAllocatedMemory is set to disp+work.ThJGetGlobalAllocatedMemory(thxxvmemu.c:2926)
J extGetUsedBytes is set to disp+work.ThVmcGetUsedBytes(thxxvmemu.c:2710)
J extGetGuardInfo is set to disp+work.ThVmcGetGuardInfo(thxxvmemu.c:1410)
J extWriteMemoryDump is set to disp+work.ThJWriteMemoryDump(thxxvmemu.c:1437)
J extGetPid is set to disp+work.ThJGetPid(thxxjava.c:7663)
J extRegPtr is set to disp+work.ThJRegPtr(thxxvmemu.c:1178)
J extGetPtr is set to disp+work.ThJGetPtr(thxxvmemu.c:1190)
J extDeregPtr is set to disp+work.ThJDeregPtr(thxxvmemu.c:1202)
J extAbort is set to disp+work.ThVmcJAbortHandler(thxxjava.c:6095)
J extExit is set to disp+work.ThVmcJExitHandler(thxxjava.c:5994)
J extSaveExit is set to disp+work.ThVmcJExitHandler(thxxjava.c:5994)
J extSaveErrTxt is set to disp+work.ThVmcJSetVmErrTxt(thxxjava.c:6065)
J extSemLock is set to disp+work.ThJSemLock(thxxvmemu.c:545)
J extSemUnlock is set to disp+work.ThJSemUnlock(thxxvmemu.c:551)
J extMtxOpen is set to disp+work.ThJMtxOpen(thxxvmemu.c:641)
J extMtxClose is set to disp+work.ThJMtxClose(thxxvmemu.c:665)
J extMtxLock is set to disp+work.ThJMtxLock(thxxvmemu.c:685)
J extMtxTrylock is set to disp+work.ThJMtxTrylock(thxxvmemu.c:780)
J extMtxUnlock is set to disp+work.ThJMtxUnlock(thxxvmemu.c:853)
J extMtxForceUnlock is set to disp+work.ThJMtxForceUnlock(thxxvmemu.c:928)
J extMtxLockCount is set to disp+work.ThJMtxLockCount(thxxvmemu.c:975)
J extMtxLocked is set to disp+work.ThJMtxLocked(thxxvmemu.c:981)
J extMtxLocking is set to disp+work.ThJMtxLocking(thxxvmemu.c:1013)
J extMtxWaitingVms is set to disp+work.ThJMtxWaitingVms(thxxvmemu.c:1046)
J extMtxIAmOwner is set to disp+work.ThJMtxIAmOwner(thxxvmemu.c:1101)
J extOpen is set to disp+work.ThIoJavaOpen(thxxfile.c:381)
J extReopen is set to disp+work.ThIoJavaReopen(thxxfile.c:535)
J extClose is set to disp+work.ThIoJavaClose(thxxfile.c:665)
J extSeek is set to disp+work.ThIoJavaSeek(thxxfile.c:750)
J extSetLength is set to disp+work.ThIoJavaSetLength(thxxfile.c:882)
J extSync is set to disp+work.ThIoJavaSync(thxxfile.c:910)
J extIoAvailable is set to disp+work.ThIoJavaAvailable(thxxfile.c:937)
J extFileSizeFd is set to disp+work.ThIoJavaFileSizeFD(thxxfile.c:965)
J extPread is set to disp+work.ThIoJavaPRead(thxxfile.c:1074)
J extPwrite is set to disp+work.ThIoJavaPWrite(thxxfile.c:1111)
J extReadv is set to disp+work.ThIoJavaReadV(thxxfile.c:994)
J extWritev is set to disp+work.ThIoJavaWriteV(thxxfile.c:1038)
J extFDataSync is set to disp+work.ThIoJavaDataSync(thxxfile.c:1145)
J extFixVmToProcess is set to disp+work.ThIoFixVmToWp(thxxfile.c:1230)
J extReleaseVmFromProcess is set to disp+work.ThIoRelVmFromWp(thxxfile.c:1239)
J extGetOSDescriptor is set to disp+work.ThIoJavaGetOsFd(thxxfile.c:1249)
J extDetachIo is set to disp+work.ThIoJavaDetach(thxxfile.c:1273)
J extSocket is set to disp+work.ThSoSocketVmc(thxxsock.c:798)
J extRecvMsg is set to disp+work.ThSoRecvmsg(thxxsock.c:1147)
J extSendMsg is set to disp+work.ThSoSendmsg(thxxsock.c:1569)
J extCloseSocket is set to disp+work.ThSoCloseSocket(thxxsock.c:985)
J extConnect is set to disp+work.ThSoConnect(thxxsock.c:809)
J extBind is set to disp+work.ThSoBind(thxxsock.c:1804)
J extAccept is set to disp+work.ThSoAccept(thxxsock.c:1985)
J extListen is set to disp+work.ThSoListen(thxxsock.c:2230)
J extPoll is set to disp+work.ThSoPoll(thxxsock.c:2381)
J extShutdown is set to disp+work.ThSoShutdown(thxxsock.c:2633)
J extGetSockOpt is set to disp+work.ThSoGetsockopt(thxxsock.c:2787)
J extSetSockOpt is set to disp+work.ThSoSetsockopt(thxxsock.c:2963)
J extGetSockName is set to disp+work.ThSoGetsockname(thxxsock.c:3122)
J extGetRecvLength is set to disp+work.ThSoGetrecvlength(thxxsock.c:3305)
J extSetNonBlocking is set to disp+work.ThSoSetnonblocking(thxxsock.c:3464)
J extCreateControlArea is set to disp+work.ThJCreateControlArea(thxxvmemu.c:3099)
J extGetControlArea is set to disp+work.ThJGetControlArea(thxxvmemu.c:3113)
J extNotifyAboutControlFlagChange is set to disp+work.ThJControlFlagChange(thxxjava.c:6147)
J extVmRunningInWp is set to disp+work.ThJVmRunningInWp(thxxjava.c:7500)
J extVmRunningOnJavaStack is set to disp+work.ThJVmRunningOnJavaStack(thxxjava.c:7508)
J extGetJavaMainStack is set to disp+work.ThJGetJavaMainStack(thxxjava.c:7513)
J extAlarm is set to disp+work.ThJAlarm(thxxjava.c:6215)
J setGlobalsHook is set to disp+work.ThJSetGlobals(thxxjava.c:6386)
J getGlobalsHook is set to disp+work.ThJGetGlobals(thxxjava.c:6374)
J getWpIdHook is set to disp+work.ThGetWpId(thxxtool.c:2002)
J getWpNoHook is set to disp+work.DpWpAdmEntry(dpxxtool.c:3215)
J getVmCount is set to disp+work.ThJGetVmcCount(thxxjava.c:3154)
J getEvtConnHdl is set to disp+work.ThJGetEvtConnHdl(thxxjava.c:1099)
J selNextHdl is set to disp+work.ThVmcSelNextHdl(thxxvmio.c:335)
J rollOut is set to disp+work.ThJRollOut(thxxjava.c:5737)
J sleepFunc is set to disp+work.ThJSleep(thxxjava.c:6901)
J selTimeout is set to disp+work.ThJSelTimeout(thxxjava.c:7292)
J proxyWakeup is set to disp+work.ThJHandleProxyWakeup(thxxjava.c:7610)
J extGetProxyActivatedHook is set to disp+work.ThJGetSapProxyActivated(thxxjava.c:7423)
J getVmcFlavour is set to disp+work.ThJGetVmcFlavour(thxxjava.c:7675)
J getVmType is set to disp+work.ThJGetVmType(thxxjava.c:7687)
J getVmMaxNo is set to disp+work.ThJGetVmMaxNo(thxxvmemu.c:3049)
J getVmId is set to disp+work.ThJGetActVmc(thxxjava.c:9681)
J isValidVmId is set to disp+work.ThJisValidVmId(thxxvmemu.c:3075)
J getVmUuid is set to disp+work.ThJGetVmUuid(thxxvmemu.c:3059)
J createUniqueId is set to disp+work.ThJCreateUniqueId(thxxvmemu.c:3084)
J statisticActive is set to disp+work.ThJStatisticsActive(thxxjava.c:7830)
J openStatInterval is set to disp+work.ThJOpenStatInterval(thxxjava.c:7852)
J closeStatInterval is set to disp+work.ThJCloseStatInterval(thxxjava.c:7868)
J intervalStatActive is set to disp+work.ThJIntervalStatActive(thxxjava.c:7885)
J extTrace is set to disp+work.ThJTrace(thxxvmemu.c:3129)
J extGetBuiltinLibs is set to disp+work.ThJGetBuiltinLibs(thxxjava.c:6250)
J extFindNative is set to disp+work.ThJFindNative(thxxvmemu.c:3150)
J extPreloadNativeOpen is set to disp+work.ThJPreloadNativeOpen(thxxjava.c:6264)
J extPreloadNativeSym is set to disp+work.ThJPreloadNativeSym(thxxjava.c:6276)
J extGetDebugFlags is set to disp+work.ThVmcGetBitmasks(thxxvmc.c:2500)
J extStartExternalTimer is set to disp+work.ThJStartExternalTimer(thxxjava.c:6288)
J extStopExternalTimer is set to disp+work.ThJStopExternalTimer(thxxjava.c:6309)
J extCheckForCleanup is set to <null>
J extJvmxInit2 is set to <null>
J extJvmxCleanup is set to <null>
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
I
I Tue Apr 29 17:58:05 2014
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0BD30040, size: 4400000)
M SHM_ROLL_AREA (addr: 59250040, size: 61440000)
M SHM_PAGING_AREA (addr: 0C7D0040, size: 32768000)
M SHM_ROLL_ADM (addr: 0C170040, size: 615040)
M SHM_PAGING_ADM (addr: 0C210040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0C2A0040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0C330040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
C
C Tue Apr 29 17:58:06 2014
C *** ERROR => ORA-376 occurred when executing SQL statement (parse error offset=0)
[dbsloci.c 12548]
C sc_p=06198094,no=1,idc_p=06B97F38,con=0,act=1,slen=66,smax=256,#vars=0,stmt=06C5E6B8,table=DDNTT
C SELECT COUNT(*) FROM DDNTT WHERE TABFORM <> 'J' AND TABFORM <> 'V';
C sc_p=06198094,no=1,idc_p=06B97F38,con=0,act=1,slen=66,smax=256,#vars=0,stmt=06C5E6B8,table=DDNTT
C prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=06C51FC0
C IN : cols=0,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=0,bound=0,iobuf_p=00000000,vda_p=00000000
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=1,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rsize=4,vmax=32,bound=1,iobuf_p=05637578,vda_p=06C5DB68
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT COUNT(*) FROM DDNTT WHERE TABFORM <> 'J' AND TABFORM <> 'V';
B ***LOG BYL=> DBQ action required because of database error [dbsh#2 @ 1100] [dbsh 1100 ]
B SQL code: 376, SQL text: ORA-00376: file 8 cannot be read at this time
B ORA-01110: data file 8: 'D:\ORACLE\DEV\SAPDATA1\SR3_5\SR3.DATA5'
B ***LOG BY4=> sql error 376 performing SEL on table DDNTT [dbstat#4 @ 693] [dbstat 0693 ]
B ***LOG BY0=> ORA-00376: file 8 cannot be read at this time
ORA-01110: data file 8: 'D:\ORACLE\DEV\SAPDATA1\SR3_5\SR3.DATA5' [dbstat#4 @ 693] [dbstat 0693 ]
B init: Got no entries from DDNTT !
B init failed
B db_stinit failed
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 260]
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 2047]
M ***LOG R19=> ThInit, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1494]
M in_ThErrHandle: 1
M *** ERROR => ThInit: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sapecc6_DEV_00 on host sapecc6 (wp 0)
M * ERROR ThInit: ThIPCInit
M *
M * TIME Tue Apr 29 17:58:06 2014
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 17
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2816) [dpnttool.c 327]
sql>select status from v$datafile;
status
One of my datafile status is 'RECOVER'
SQL>recover datafile 8;
ora_00283 recover session cancelled due to errors
ora_01110:datafile 8:'d:\oracle\sid\sapdata1\sr3_5\sr3.data5'
ora_01122:database file 8 failed cerification check
ora_01110:datafile 8:d:\oracle\sid\sapdata1\sr3_5\sr3.data5'
ora_01251:unknown file header version read for file number 8
Please give me the suggestion..
Best regards
naniHi K Nani,
From your error message
ora_01122:database file 8 failed cerification check
ora_01110:datafile 8:d:\oracle\sid\sapdata1\sr3_5\sr3.data5'
ora_01251:unknown file header version read for file number 8
Looks like Data file is corrupted.
You may refer SAP note 696141 - Composite SAP Note: ORA-01122
10. ORA-01251: Unknown File Header Version read for file number <file_id>
Reason: The file header cannot be correctly read.
Solution: If you use Oracle 9.2 on WINDOWS and if you already installed the database with Oracle 7.2 or lower, see Note 636466.
Otherwise: Restore/recovery
Only solution here is restore the database from backup.
Alternate solution If it is a non-production system.
If the file is corrupted, then take the datafile offline and open the database.
Hope this helps
Regards,
Deepak Kori -
[SOLVED] database file for multilib does not exist
Hey guys I ran into a problem today when I tried to install the proper packages I needed to use my wifi card. However when I tried to install it it gives me the error "database file for multilib does not exist" I can t seem to find out why I even tried chrooting into it and installing it that way with no luck. The package I tried to install was "pacman -S wireless_tools netcfg" thanks for the help guys you've been great.
Last edited by bdawg (2012-09-18 22:57:17)bdawg wrote:
Ok so the whole output is as follows:
Warning: database file for 'multilib' does not exist
Error: failed to prepare transaction (could not find database)
And my Pacman.conf is blank
pacman.conf and Pacman.conf (with capital 'P') are two different files. Double-check this.
Are you running a 64-bit system?
Your /etc/pacman.conf should look like this: https://projects.archlinux.org/pacman.g … an.conf.in but with some repositories configured: https://wiki.archlinux.org/index.php/Pa … positories
Last edited by karol (2012-09-18 22:13:59) -
How to use database file within jar archive
Hi. I'm quite new in Java programming, and I'm wondering if what I did makes sense or not.
In my applet I'm using a MS Access Database file, which is contained in the same Jar Archive like the Applet class file. I tried and tried to use this Database file directly but it wouldn't work. Than I read in some other forum that it is not possible to use the database file directly within the archive. First question: Is that true?
Than I desided to extract the DB file in the init() method of my applet to the default temporary foulder. When the program is closed I use the destroy() method to delete it again. Everything works well now. But is this the typical way this is done?
Thanks for help!Hi,
here is the code which extracts the database file out of the jar archive (the same archive in which the class file is):
//get the user temporary folder
File TempFolder = new File(System.getProperty("java.io.tmpdir"));
//create (empty) db file
efile = new File(TempFolder, "steelSections.mdb");
// if database file is not yet extracted
if (!efile.exists()) {
//get an input stream for the database file
InputStream in = new BufferedInputStream(this.getClass().getClassLoader().getResourceAsStream(
"FaST/db/steelSections.mdb"));
//create an output stream for the db file on the file system
OutputStream out = new BufferedOutputStream(new FileOutputStream(efile));
//-Buffer to copy the data
byte[] buffer = new byte[2048]; //buffer to copy the binary
for (;;) {
int nBytes = in.read(buffer); //read data
if (nBytes <= 0)
break; //no more data to read
out.write(buffer, 0, nBytes); //write data
out.flush(); //close out and in streams
out.close();
in.close();
If you have the db file in an other jar archive file you need a referenze to the entry in the other jar archive. I'm not sure how to get this, but I'm sure you fill find a solution by searching in this forum...
Good luck!
Maybe you are looking for
-
Problem when we created the managed server to configure different ports.
I am trying to configure different ports for admin console and my communication service as we can’t share admin port to the outside world. So that only admin can access admin console using admin port. And out side clients can access my webapplication
-
How to change the lenth of existing field in sap standard table
Hi all, can anybody help,my requirement is, how to change the length of existing field in sap standard table.... thanks in advance..
-
I recently went to use my computer (MacBook Pro) and all of a sudden the sound was gone. The icon for sound is completely grayed out and the buttons on my keyboard don't work. When I go to system prferences there is no 'internal speakers' option eith
-
Recording File Size issue CS 5.5
I am using CS 5.5, a Balckmagic Ultra Studio Pro through USB 3.0 being fed by a Roland HD Video switcher. Everything is set for 720P 60fps (59.94) and the Black Magic is using the Motion JPEG compression. I am trying to record our sermons live onto a
-
Installation problems with NW 2004s test-drive
Hi I'm installing N4S testdrive on a Dell notebook under openSUSE 10.2 with wireless connection. I mention the wireless part because I suspect by wlan0 settings may have something to do with it, but then, I'm not sure and need some advice. When first