Inventory date wise

Hi all,
We are devloping one report that will show the inventory of material present on the date specifies by the user.
When we run the report system should output the total inventory say 100, and what is the qty present in 0-6 month(say 40 qty reciept ), 6-12 month (say 50), and 12-24 month (remaining 10 qty).
Bifurcation as per the period mentioned.
User will run the report for any date after go live.
(its been 5 years we are gone live)
What logic i can use here?
If movement type is to be considered what are the movement types for GR
and What movement type i should consider for GI AND REJECTION AND REVERSAL .
PL SUGGEST THE LOGIC FOR THE SAME.
Regards,
Ashu

Hi,
There are some standard reports like MB5B, MC.1 etc, which will give you date wise inventory figures.
If that does not suit your requirement, you can proceed with the customization..
The movement type to be considered for Goods Receipt are
101,(102), 501,(502) 561, 701
Issues - 201,(202) 161, 122, 261,(262), 702
based on your business transactions, there could be other movement types too apart from the above, which you need to cross check.
Regards
Merwyn

Similar Messages

MB5B Report table for Open and Closing stock on date wise

Hi Frds,
I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
Thanks
Mohan M

Hi,
Please check the below links...
Query for Opening And Closing Stock
Inventory Opening and Closing Stock
open stock and closing stock
Kuber

Date wise and ware house wise stock

Hi all,
I want to see the date wise stock and warehouse wise stock for all items. How to do that? I dnnt think there is a system generated report for that.
Ex- form date---- to date----- i want to see what was my instock warehouse wise.
The "Inventory in Warehouse Reports" gives the current inventory only.
I have written a query to find the date wise inventory datewise, but i cannot segment it warehousewise. Please help me. How can it be done?
Regards
Raj

Hi All,
Thanks for your response. Actualy I have explored these areas. But these parameters are alternate to each other. I mean we can generate Warehousewise or Item wise or BPwise........
But I want to have a warehousewise and sumed or grouped itemwise with date selection paramenters.
Moreover i find that when i generate the warehouse wise report (in the other Tab> by- warehose then the report generated is blank!!
Please suggest a alternative.
Regards,
Raj.

Tables req to get date wise stock report

Hi
Pls advise, what are the tables req to get date wise stock report??? i don't want any t codes... i have to do with age analysis ,??
Anyone has answer? pls provide it.
Edited by: UJ on Mar 3, 2010 8:54 AM

You can take below details which help you to get the exact things..
*-- Tables delcaraion
TABLES : mkpf,   " Header: Material Document
              mseg,   " Document Segment: Material
             mara,   " General Material Data
             makt.   " Material Descriptions
*-- Types declaration
TYPES: BEGIN OF ty_mkpf,
        mblnr TYPE mblnr, " Number of Material Document
        mjahr TYPE mjahr, " Material Document Year
        blart TYPE blart, " Document type
        budat TYPE budat, " posting date
       END OF ty_mkpf.
TYPES: BEGIN OF ty_mseg,
        mblnr TYPE mseg-mblnr, " Number of Material Document
        mjahr TYPE mseg-mjahr, " Material Document Year
        zeile TYPE mseg-zeile, " Item in Material Document
        matnr TYPE mseg-matnr, " Material Number
        bwart TYPE mseg-bwart, " Movement Type (Inventory Management)
        dmbtr TYPE mseg-dmbtr, " Amount in Local Currency
        menge TYPE mseg-menge, " Quantity
        lgort TYPE mseg-lgort, " Storage Location
        pbamg TYPE mseg-pbamg, " Quantity
        werks TYPE mseg-werks, " Plant
        ummat TYPE mseg-ummat, " Receiving/Issuing Material
        umwrk TYPE mseg-umwrk, " Receiving/Issuing Plant
        umlgo TYPE mseg-umlgo, " Receiving/Issuing Storage Location
       END OF ty_mseg.
Further if you want you can play with Movement types.

Inventory data load from Inventory Cube to another Copy Cube

Hello Experts,
I am trying to load Inventory data from the Inventory cube(say YCINV) to a copy cube say YCOPY_CINV(copy of Inventory cube), but the results appear inconsistant when I compare the reports on these 2 cubes. I am trying to populate a fiield in copy cube so that I can populate the same data back to the original cube with the new field in it, I am doing this reload back and forth for historical data purpose only.
I have seen lot of posts as how to run the setups for Inventory data, but my case does not need to perform set up runs.
Does the note 1426533 solve the issue of loading from one cube to another ? we are on SAP BI 7.01 with SP 06 ,but the note specifies SP 07 ?
I have tried note 375098 to see if it works, but I do not see the options as mentioned from step "Using DTP (BW 7.x)" in BI to perform this note
Please advise on whether to go with implementing note 1426533 or is there any other way to load inventory data from one cube to other.
Regards,
JB

Hi Luis,
Thanks for your reply,
I do not see any setting like Intial stock in DTP except "initial non-cumulative for non- cumulative". I did try using the option "initial non-cumulative for non- cumulative" ,but the results still do not match with the inventory cube data.I do not see the check box for marker in the copy cube (under roll up tab). Please let me know if we can really implement this solution ,i.e. copying from inventory cube to copy cube and then re-loading it back to inventory cube for historical data. Currenlty, I am comparing the queries on these 2 cubes, if the data matches then I can go ahead and implement it in Production, other wise it would not be wise to do so .
Regards,
JB

Date Wise and Storage Location Wise Stock Qty & Value Report......

Hi Experts,
We want a report Date Wise(As on 31.03.2008) and Storage Location Wise Quantity & Value Report for only Finish Materials. Is there any report ?
From Mb5b we canot get storage location wise report as we get only plant level qty and value.
Pl. guide us.
Regards,
Yusuf

Hi Yusuf,
Try the Tcode: MC.9 there enter the site and article and executeYou will get details of the article
stock, value. if you double click the article you will get the details of storage location.
Hope it will be help for you
Regards
GK

MB5B Report for Date Wise Stock and Value

Hi,
I am Taking MB5B Report for Date Wise Stock and Value.
But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
I have another Doubt in these report three Stock type indicaters are there like these.
1.Storage Location / Batch Stock
2.valuated Stock
3.Special Stock.
But i have one doubt what is defferent these
1.Storage Location / Batch Stock
2.valuated Stock

Hi Prasad,
Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
Regards
Karthick

Open Date-wise G/L selection

What is the table for selection of G/L Account line item for open items date-wise, I took BSIS table but when i select data for particular date(BUDAT) in my report the amount is mismatch to T_code(fbl3n).
If i want to select the back date data then defiantly that data was cleared as today date and will not found in BSIS table, so please can you help me how to get data for date-wise.
Coz my client want if he select the particular date then what ever unclear (open) item data as on selected date is display.
Thank's & Regard's
Atul Singh
Double-post

Hello,
Please check the following logic.
e.g.
Posting date : 01.08.2010
Clearing Date : > or = to 01.08.2010.
Put the above logic in the program, so that it'll fetch the open records which are on back date.
Rgds
Murali. N

Stock Report Date Wise

Dear All
I am devlop new Stock Report Date wise
my output follows
Material Plant Storagelocaton Saleorder OPenning stock Closing Stock Total
Which Table stored that details?
how will calculated?
Thanks and Regards
Suresh

hey
i think the following tables
will be helpful for the report:-
1>MARA
2>MBEWH
3>MSEG
4>VBRP
hope this will help
good luck
harry.

Inventory data not matching with R/3

Hi,
In R/3 production we have the data from 1999-Till date.From 1999-2004 Data was archieved in R/3 system.So we have two years live data in the R/3 production.
We have filled the setup tables and extracted the Inventory data then loaded into 0IC_C03 Cube.
But the values in BW report from 0IC_C03 is not matching with the values in R/3 report.
1.What could be the reason?
2.If we need to extract the archieved data from R/3 what are the steps we need to do?.
Pls help us with your suggestions.

We have followed as per the How to handle inventory managment document.
The quanity value is matching between R/3 and BW.But the Valuated Stock Value is not matching for some of the materials.For the current period it showing the right value(for ex.if we check for 12th Month).
But If we check the material for old months like October,Aug the value of valuated stock value is not matching with R/3 for some of the materials.
In RSDV validity table date maintained from 1999-Dec'200.
We are using the standard business content cubes and update rules.Is there any change needs to be done in update rules for 0IC_C03 cube to get the right values for all the materials?..
Pls help with your inputs.
Thanks
Soujanya

Deploying custom report for custom hardware inventory data.

Hi!
I want do the following:
1) Extend Hardware Inventory using my own *.mof file. Like,
#pragma namespace ("\\\\.\\root\\cimv2\\SMS")
[ SMS_Report (TRUE),
SMS_Group_Name ("My Inventory"),
SMS_Class_ID ("CUSTOM|My_Inventory|4.0") ]
class My_Inventory : SMS_Class_Template
[SMS_Report(TRUE)] string SerialNumber;
[SMS_Report(TRUE)] string SomeData;
2) Extend Reporting system with my own report that will use data from custom hardware inventory. For example, joins inventoried data with SCCM resources.
3) Deploy 1) and 2) programmatically to any sccm installation. So, report should not be linked to concrete data source or report server url.
If you know the tools that may help me, it will be very helpful! Many thanks!

You should ask the .rdl part from the SQL Reporting services forums, you should get better answers from there, because this isn't purely a ConfigMgr issue.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices

How to extract Inventory data from SAP R/3 system

Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?

Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK

Storage location wise opening, closing stock...date wise...report

Hi all Experts,
I am at client site and hav to provide a report containing opening, and closing stock (and issue qty if possible) storage location wise and date option wise.pls help
regards
vikas chhabra

Hi,
Use MB51 for date wise report
OR
Use MCL1, MCL5, MCL9, MCLD (If Warehouse Management you are using)
OR
You have to develop an own ABAP report.
Regards,
Biju K

LIST OF STOCK VALUES BALACE REPORTS FOR DATE WISE

Dear friends,
In MB5L T.Code we can get period wise balance reports,but client's requirement is date wise Balance report,could you help me any kind of standard reports for date wise.
Regards,
Sabhapathy R

Dear Vishal,
Thanks for your reply,mb5b only stock and documents number we can get client want to mb5l with date specific balance reports with GL account's.
Regards,
Sabhapathy R

Date Wise stock report (0IC_C03)

How can we see the date wise stock quantity and value in Query using cube 0IC_C03.
Example:Suppose i want to see what was my stock quantity and stock value on 25th Jan08.

Hi,
Restrict the Key figure value and quantity with the date.
OR
Go to the key figure in RSA1-> Info objects -> Double click on ur key figure-> Go to the aggregation tab Specify exception aggregation as last value and reference char as 0calday.
This will give u the stock on the last day.
If u want to do it in bex
Create a Calculated Key figure put ur key figure in. And right click select the properties select exception aggregation last value and reference char as 0calday.
Khaja

Inventory date wise

Similar Messages

Maybe you are looking for