Inventory DB will not Configure after 6.5sp4a

I've recently installed NetWare 6.5sp4a on my zen server and it's broken
my inventory. When I attempt to configure the DB ConsoleOne hangs (both
on admin workstations and the server itself).
There are no errors on the ZEN Inventory screen - however, the logging
isn't very verbose. (Does anyone know the command to enable verbose
logging on the Inventory screen?)
I have the SP4 backed up and can rev back - However, I would rather see
if the problem can be resolved and use backing out of the service pack as
a last resort.
Has anyone seen this or had similar problems?
Thanks.
Matt.

On Mon, 12 Dec 2005 15:49:14 GMT, [email protected] wrote:
> There are no errors on the ZEN Inventory screen - however, the logging
> isn't very verbose. (Does anyone know the command to enable verbose
> logging on the Inventory screen?)
you wont get anything on the screen but in the log file..
but wonder if anything would show up..
Try enable debugging....
http://www.novell.com/documentation/...rts/zdprts.pdf
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

Similar Messages

ITunes will not configure after upgrdade to 8.0.2

I upgraded iTunes to 8.0.2 this morning. After install, is says
Windows is configuring iTunes and asks me to reboot - and this
is an endless loop now. I have tried completely de-installing
and re-installing iTunes - but still the same problem. Any one
seen this before or know a fix? Thanks.

I have exactly the same problem since downloading the upgrade earlier today. I've also uninstalled and reinstalled to try to fix it but all I keep getting after it has nearly completed loading (which takes a frustrating amount of time each time) is a repeat instruction to re-boot in order to complete the configuration and I've had enough of the endless 'loop' that you refer to. It worked fine before the upgrade but I can't go back!

ITunes will not launch after upgrade--click, bounce bounce, nada

iTunes will not launch after upgrade--rebooted nothing--2 bounce icon
then shut down all and unplugged, restarted--no change, iTunes still will not launch after upgrade
iTunes current version
on imac w/10.6.8

I have the same issue.
Allready uninstalled iTunes and reinstalled it, but the same problem occurs.
Icon keeps bouncing, and all that's visible is the first menu-item in the top menu bar, named iTunes. Nothing is clickable though.
The iPhone Configuration Utility doesn't seem to work either, it crashes on uploading an app to my iPhone. I guess it's using some of iTunes' libs or something.
Does anyone know how to get iTunes working again? I'm getting pretty desperate over here...
Thanks!

Will Not Copy After Being Idle

THIS IS A COPYING ISSUE!!! After installing the upgraded version of Comcast's latest modem/router, our HP 6550 would not print. I contacted Comcast and reported the difficulty and they informed me it was a printer problem - not their new modem. Consequently, we purchased a new HP 5740 printer The printing function worked fine and it would copy immediatley after the printer was turned on, however, after the printer sat idle for a couple of hours, the copy function would not work. If you then turned the printer off and immediately turned it back on, it would copy. Again, Comcast reiterated it was a printer problem. I returned the original 5740 back to the store from which it was purchased and exchanged it for another HP 5740 printer. After hooking up the second HP 5740, the same problems with copying occurred. I returned the second HP 5740 to the dealer for a refund and left town for three months. We recently returned and purchased a HP ENVY 7645 printer from another dealer. We are having the same issues with this printer as we had with the two previous HP 5740 printers. I discussed the situation with a level II supervisor at Comcast and he arranged for a new modem/router to be brought to the house and installed by a technician. The installation occurred today and we are still experiencing exactly the same problem. The Comcast technician who installed the new modem/router (who couldn't wait around while the printer sat idle) said that if the problems occurs after the installation, we should purchase a printer/copier from another manufacturer - or turn our printer "off and then on" when we want to copy. He also asid that if this problem does continue after the new modem/router is installed, it definitely won't be a Comcast problem. DOES ANYONE HAVE ANY IDEA WHERE I SHOULD GO FROM HERE?

Hi @lamoso,
Welcome to the HP Forums!
I understand that your HP Envy 7645 will not copy after being idle. I am happy to look into this for you!
I believe this is happening due to the printer going into sleep mode. As the options are for 5 minutes, 10 minutes, and 15 minutes for sleep mode to activate. I would recommend trying a hard reset, by going to this post,How to perform a Hard Reset, by @Rich1. It is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector. See this article, Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector for more information. This applies to Inkjet printers as well.
After the hard reset, I would then make sure the printer's firmware is up-to-date. Getting the Latest Firmware and Product Updates.
Let's see what happens after giving these two steps a try!
Thank you for posting!
“Please click the Thumbs up icon below to give me a virtual high-five for responding.”
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Firefox will not start, after reboot.

For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
== This happened ==
A few times a week
== Around the time 3.5 was released

Hello Tom.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours and

My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours hoping it would reload and work. No luck.

Hello KCC4ME,
You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564
If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
OS X Mavericks: If you think you have incompatible login items
http://support.apple.com/kb/PH14201
Cheers,
Allen

Ipod touch will not sync after new itunes update

Ipod touch 4th generation will not sync after I updated the new itunes. Actually after I updated to the new itunes it deleted all my music from my ipod and refuses to reload. If someone could please help me that would be completely appreciated. I tried trying to sync each song individually but it didn't help (before it stopped syncing), then it stopped syncing, even though I have it hooked up it brings everything that I have on my ipod up but it won't do anything.

When I tried the first time it asked me if i wanted it to stop syncing and to restore. It gave the choices of yes and cancel, i didn't click either because the option box went away and it just stopped restoring on its own. I did the store again and now it is asking if i want to set up as a new ipod or to restore to Andrea's ipod. Should I set up as new?
Thank you Espeon for the article

Ipod touch 5th gen will not sync after windows 8.1 update

ipod touch 5th gen will not sync after windows 8.1 update. Computer see's Itouch as mass storage and charges. Worked with Window's 8 fine, as soon as update was done and restarted computer Itouch doesn't show up. Itouch seen on two other computers.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

Mac Mini will not boot after Security Update 2008-007

Hello,
A G4 Mac Mini machine I was asked to take a look at will not boot after the owner (succesfully) installed Security Update 2008-007 from Software Update. Booting always hangs at the blue screen after the Apple logo, and booting in verbose mode reveals that WindowServer is crashing repeatedly. Permissions and filesystems have been repaired, PRAM reset, etc. Safe boot also exhibits the same problem, but it is possible to boot to single user mode. Hardware checks out fine with diagnostic utilities.
Any suggestions on how to fix this? Unfortunately, backups are not available (it's not my machine =).

Hi Arkku , and a warm welcome to the forums!
I'd certainly give Sig's advice a try first.
If that should fail...
applesetupdone...
This was Posted by: JoseAranda at September 9, 2006 3:48 AM
"OK, restart your computer, hold down Command-s and type in the following:
/sbin/fsck -fy Enter
/sbin/mount -uaw Enter
rm /var/db/.applesetupdone Enter
# The rm command is the remove command which deletes the file.
# Robert: I'd rename the file via: mv /var/db/.applesetupdone /var/db/.applesetupdone.old
reboot Enter
Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
end of posted by: JoseAranda"
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/

TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.

MacBook Pro will not boot after software update

MacBook Pro will not boot after doing an Apple Software Update (of course they will not help you). MONEY, MONEY, MONEY is the name of the game. They can cause your computer to crash and still charge you!
Does anyone have an answer to why my computer is showing a little gear spinning for hours? I have tried several things with NO luck.
Thanks-

Run through the list of fixes here
Step by Step to fix your Mac

HP Pavilion 15-n268sa will not boot after windows update (windows 8.1)

After a series of windows update (windows 8.1) my HP Pavilion 15-n268sa will not boot up, no fan noises, no lights no nothing.
I have tried a "hard reset" a number of times with no success.
When the battery is present the white LED flashes 3 times when the power button is pressed.
Please please help.

Hello Cuffy,
Welcome to the HP Forums!
I understand you notebook will not boot after a series of Windows updates.
Can you tell me if you are able to access the HP Recovery Manager by repeatedly tapping the F11 key while the notebook turns on? If you can access this, try doing a system restore to before you installed the updates. If not I would suggest you go through this document: Computer Does Not Start and the LEDs Blink or the Computer Beeps.
If it's the Caps Lock light that is blinking this document will tell you exactly what the error is (spoiler: 3 beeps is a memory failure). This could also explain the failed updates. The updates are stored in the RAM before being applied to the operating system.
You can try reseating the RAM, or using only 1 of the RAM cards, as you have 2x4GB cards. If it still doesn't work with 1 card, try the other card to confirm it has failed.
You can replace defective cards via HP Phone Support if covered under warranty or at the HP Part Store if not covered. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
Hopefully this information helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Organizer will not open after I tried backing up photos on external hard drive on Mac. Editor opens, but not Organizer. This is a repost of a problem first reported 10 days ago.

Organizer will not open after I tried backing up photos on an external hard drive on Mac. Editor opens, but will not launch Organizer. Have tried clearing the catalogs, but nothing works. This was first reported 10 days ago. Had to be out of the country for a week - without photoshop working-- and now I'm back with the same problem. Can someone please help, or do I dump this and try to get some help just reloading the program?

jnrmendonca
It had 4 years of photos and videos on it.
To what did your camera record those photos and videos - camera's internal memory, inserted memory card, other?
Any remote chance that the latter may still exist for you to use to download the camera files to your new external hard drive?
ATR

Inventory DB will not Configure after 6.5sp4a

Similar Messages

Maybe you are looking for