Inventory doesn't remove workstation

Hi,
I have zenworks 4.0.1 with Sybase, but now I have a lot of workstations
that now they aren't in the NDS, and I want to remove them. I know that
we can't remove these workstations manually, but I try to follow the
steps that I've seen in the knowledge database, but I can't. I think that
I'm doing something wrong. Could anybody guide me?
Thanks

Ok, you are right, but I have the same problem. I open
\\Nwzen\DATOS\ZENworks\Inv\server\WmInv\properties \InventoryRemoval.propet
ies and I write FilePath=DATOS:ZENworks/Inv/server/WmInv/properties/
then I write on the Server Console startser NDSLookupForDB and then it
writes:
startser NDSLookupForDB
InvEnv.NCF
Loading module JAVA.NLM [Not Multiple]
InvEnvSet
After that, it switchs to ZENworks Workstaion Import windows, and I check
that there is a file in
\\Nwzen\DATOS\ZENworks\Inv\server\WmInv\properties called
DeleteWSList.txt which is empty (0 Kb)
What am I making wrong?
> they do not send you to the same page (I have just checked) one is for
> the inventory sync service, and one is for the inventory removal
> service...
>
> --
>
> Shaun Pond
>
>

Similar Messages

  • Cmd-Opt-V pastes effects but doesn't remove those there-Why not?

    Hi
    Been going thru some lessons, what fun, how helpful learning shortcuts and techniques I haven't employed up to now. Anywho...
    When I copy a clip (intending to paste them to another clip) and then press Cmd-Opt-V, it pastes effects from the copied clip but doesn't remove those to the targeted clip. Why not?
    best
    elmer

    That is the way the application works.
    To my mind, that is a better choice than would be deleting the existing effects.
    On the other hand, it might be useful to have a "remove effects" command - though I would not use it very often.
    You can use the feedback to request/suggest features. I don't think that they will change this, as it is bound to annoy at least as many people as it pleases.

  • Removing Workstations from Sybase DB

    Hi,
    Server & Workstations use Zenworks 4.01 + IR5 patch.
    I have some obsolete workstation inventory information in the zenworks
    sybase database. The eDirectory objects no longer exist but the data for
    the workstations is returned in Inventory Query results.
    I've read discussions and TID's for solving this on other versions of
    Zenworks but none of the solutions worked for me. A "sync" to ensure that
    data is removed if the eDir object does not exist would be good.
    A few times in the past year the sybase database was offline for a week or
    so. It could be that the edir objects were removed at this time and
    therefore the removal process did not find it's way back to the sybase DB.
    I have no automated WS inventory removal procedure.
    I don't want to start with a clean DB and let it repopulate as some data
    from workstations that only connect periodically is valuable.
    Thanks in advance,
    Julian

    Thanks for the comment Marcus. I found that I had a problem with paths in
    this file:
    \ZENworks\Inv\server\WmInv\properties\InventoryRem oval.properties
    and syntax in the file:
    \ZENworks\Inv\server\WmInv\properties\InventoryRem ovalList.txt
    With these two issues resolved a : "startser RemoveInventory" now removes
    the items as desired.
    Cheers
    Julian
    > On Tue, 24 May 2005 02:32:49 GMT, Julian Orange wrote:
    >
    > > I've read discussions and TID's for solving this on other versions of
    > > Zenworks but none of the solutions worked for me. A "sync" to ensure
    that
    > > data is removed if the eDir object does not exist would be good.
    >
    > the sync is being done automatically, configured on the inventory service
    > object, second tab...
    >
    > problem is that the sync doesn't work 100%..
    >
    > you will find information in the documentation on how to purge wks
    manually
    > from the database...
    > --
    >
    > Marcus Breiden
    >
    > Please change -- to - to mail me.
    > The content of this mail is my private and personal opinion.
    > http://www.edu-magic.net

  • How to remove "workstation" that really is a gaming adapter?

    LELA is designating a WGA600N wireless gaming adater as if it were a workstation computer running XP.  Because of that designation, there is no "remove" option for the device.  I'd like to remove the workstation, so I can properly re-desginate the gaming adapter.
    I've renamed the device to "network gaming adapter" but that doesn't really help.  Doing so simply changes the graphic shown on the LELA screen.  LELA still displays the device as a workstation comptuer under the "details" option.
    Any guidance would be most appreciated.  Can I remove the "workstation?"

    Yes, you have accidentally installed some sort of adware. The fastest, most effective way to identify and optionally remove all currently known adware is by using AdwareMedic, developed by thomas_r. this Forum's malware guru, owner of TheSafeMac and a colleague of mine.
    If it turns out to be the Downlite adware, then they have managed to block your access to that site and you will need to use an alternate technique as described in About the Downlite adware.
    To understand why this happened an how to avoid such things in the future read John Galt's How to install adware.

  • Removing workstations from database

    I have auto removal of unused worksataions setup on several servers.
    I
    noticed that some of the workstation objects that were manually
    deleted
    from NDS still show up in an inventory scan. Shouldn't the scheduled
    removal get rid of those from the database even if they've already
    been
    manually removed from NDS?
    Thanks,
    Jeff

    > [email protected],
    >
    > > Got it working. Thanks anyway.
    >
    > What was the fix? <G>
    >
    Jared, in my message I wrote that I was using the STARTSER
    NSLOOKUPFORDB
    command and getting an error message. I was typing it in at the
    server
    console just as I had written it in my message. The actual command is
    STARTSER NDSLOOKUPFORDB. I was missing the first "D" in
    ndslookupfordb...human error.
    jg

  • Generating RoboHelp for Word with RH6 in HTML Doesn't Remove MSO styles

    Here's the Word portion of the question, which I really
    should post under a separate heading. (The WebHelp portion is under
    WebHelp - DiMost, posted March 19, 2007)
    In RHx5, I use(d) RoboHelp for Word to convert my documents
    from an Information Mapping format (with tables) to a stripped-down
    document that I converted to HTML without all the Word inline
    styles.
    - Applied a "conversion" template to the doc
    - Imported the doc into the RH for Word file.
    - Converted the styles and removed page breaks
    - Converted ONE heading to the main topic
    - Created WinHelp and checked to be sure there are no
    corrupted tables and the topic converted
    - Generated in WebHelp
    - Imported the HTML document output to the main WebHelp
    project. (The document arrives without all the MSO word inline
    styles)
    - Applied the CSS for the project.
    Document conversion complete....all the inline styles were
    removed.
    NOW, RH 6 retains all the styles and converts every heading
    style to a topic, even though RH5 did not.
    Converting it in RoboHelp for Word x5 worked really well, but
    doesn't appear to work now. And importing the Word doc directly
    into RH6 for the WebHelp project is still the huge mess it was
    before. It looks like it still requires hand-stripping all that
    code out by hand.
    Believe me, I have tried everything (including freestanding
    apps) to get rid of the Word (MSO-whatever) embedded styles out of
    the Word HTML.
    I welcome any ideas. Thanks!
    Diana

    I don't think anything changed on defining what should be a
    new topic. Check the options as you import as that can make such a
    difference and of course your RH6 settings will be different
    initially.

  • Diagram Disable Structure doesn't remove all objects it contains after deleting the structure.

    I have programmed in side of a while loop a Stop from "Application Control", later I used disable structure around that "Stop". It was working fine, but after removing disabled structure containing the disabled "Stop" my application stops even there was no reason to stop. Later I have experienced that removing the disabled structure leaves hidden object in the code and some how they get executed and it is no way debugging due the objects are invisible.
    I am worried that this is a bug in Labview !
    (Edi)
    Solved!
    Go to Solution.

    The Stop was in the disabled case in a frame and after removing the complete "disable structure" the software stopped randomly at the location where the disabled structure containing the Stop was already removed. Unfortunatally the code is to complex to post. I am working on a demo, but sofar doesn't prove my point yet. But I realized Labview was pointing on left over items from the disabled structure after its removal. The compiler was high lighten the hidden objects in the same shape of the object but without any visible object in the high lighted position in the graph. 
    (Edi)

  • Best way to remove workstation?

    Hi! when we move a computer to another room, we rename the computer, then do a WSREG -UNREG and WSREG, the new workstation object is created, but the old workstation object stay there.
    If I delete the old object, the information stays on the sybase db!
    So what is the best way to remove a workstation object?
    I have a remove policy that work, but if I dont want to wait?
    thank you,
    Eric.

    eric,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Removing Products in B1 Doesn't Remove Them in WebTools

    I'm kind of confused about how WebTools is synching with Business One.  I deleted a 14 items in B1 and then ran a successful sync, which showed those 14 records as coming in with a Delete request.  What I don't understand is that those items are not then deleted from WebTools anywhere.  They still exist in the PartsMaster table and show up on my website, and if they were a part of any variants, they are still listed as valid options.  Is that how it is supposed to work?  Doesn't that defeat the purpose of the sync?
    Derek

    Hi Derek,
    Here is the SAP note:
    Synchonization Limitations for SAP B1 Web tools 2007
    Symptom
    List of known Synchonization Limitations for SAP Business One Web tools 2007
    Other terms
    E-Commerce, NetPoint, Praxis
    Reason and Prerequisites
    Solution
    No Scalability available
    In current version it is not possible to distribute the load of SAP BusinessOne Web tools to more then one server. -This functionality will be provided with next version SAP Business One Web tools 2008
    Changing Address Names
    Changing Address Names in SAP Business One Web tools will cause synchronization problems -This has to do with multiple bill-to addresses for non-vendors not being supported in B1. Address labels should stay constant for consistency.
    SAP Business One Web Objects Deletes and Cancels are not supported
    SAP Business One Web never deletes anything in B1. To delete, you must perform the delete in B1 and SAP Business One Web tools each individually.
    Upgrades will overwrite customization changes to web page files or controls.
    If you hand edited any of the existing pages in web directory (.aspx or .ascx extensions) these files will be replaced with the newer files from the install or uprade package and your changes will no longer be active and will need to be reintroduced into the files again if you still feel they are necessary.
    Audit Trails or Archiving
    Currently no archiving is possible and no Audit Trails are kept.
    No Synchronization of SAP Business One Web tools only items
    No Synchronization of SAP Business One Web tools only items: Variants, Prospects, Campaigns, Machines & Fitments, Support Projects, Part Attributes, Cross Sell, Additional Media, Additional Notes, Product/Style Lines, Shipping Price Charges/Breaks, Payment Price Charges/Break. -Workaround: can be handled with a custom plug-in. For more information, please download our SDK which contains an API and a synch plug-in tester.
    One-Way synchronization from SAP Business One to SAP Business One Web tools
    One-Way synchronization from SAP Business One to SAP Business One Web tools: Price Lists, Invoices, A/R Transactions, Deliveries, Inventory -Changes made in SAP Business One to these items will be either overwritten in SAP Business One Web tools or misrepresented in B1.
    User Defined Fields do not synchronize.
    User Defined Fields in SAP Business One Web tools do not synchronize. Workaround: can be handled with a custom plug-in. -For more information, please download our SDK which contains an API and a synch plug-in tester.
    Vendors and Leads do not synchronize from SAP Business One Web tools
    Vendors and Leads do not synchronize from SAP Business One Web tools -SAP Business One Web tools synchronizes standard Business Partners only
    Template and Production Bill of Materials are not supported
    Template and Production Bill of Materials in SAP Business One Web tools are not supported -The only types of BOM's which SAP Business One Web tools supports are Sales and Assembly
    Additional Expenses are not fully supported
    SAP Business One Web tools Additional Expenses are not fully supported -SAP Business One Web tools utilizes shipping and handling document expenses, this cannot be broken down on a part by part basis. There are only two expenses available to assign. Shipping or handling.
    No Synchronization of Mapped Items: Taxes & Codes
    Tax laws are often different for e-commerce than for standard commerce. SAP Business One Web tools allow for more flexible tax application.
    Restrictions to Pricelist
    Restrictions to Pricelist: No support of Hierarchies, Expansions, Pricelist Discount Groups, and Pricelist Account Special Pricing Discount Percentage -SAP Business One Web tools only synchs Pricelists and Account pricing. Quantity Discounts, Hierarchies, Expansions, Pricelist Discount Groups, and Pricelist Account Special Pricing Discount Percentage are not supported.
    Account ID should be restricted to 16 characters for B1 synchonization
    To synchronize a SAP Business One Web tools account to SAP Business One Web, the account ID should be restricted to 16 characters as otherwise the synchronization will fail.-Whencreating prospect names or new business partners in SAP Business One Web tools, limit the Account ID to 16 characters or less.
    Taxes need to be Setup seperately with SAP Business One Web tools
    Appropiate retail internet taxes for your localization will need to be created. When these tax codes are created you will need to make sure to use proper and valid start and expiration dates for interent taxes to be calculated correctly for retail customers that are newly created.
    Payment Methods need to be created seperately inside SAP Business One Web tools
    You will need to add applicability date details for Payment Methods that are in your expenses. These expenses must be created with proper and valid start and expiration dates.
    Discount Codes must be setup in SAP Business One Web tools
    If discount codes (coupons) are appropiate for your business you will need to set them up in SAP Business One Web tools. These codes can be repeated because of multiple or changing applicability dates. These dates must be entered in an appropiate and valid fashion for the discount to apply. This discount will appear on the SAP Business One document as a discount as well.
    Service contracts of type serial number synchronize only from B1 to Web tools
    There is no support of serial numbers for items within Web tools, therefore, service contracts of type serial number will synchronize to Web tools, but changes made in Web tools will not synchronize back to B1.
    SAP Note Number  Display Print
    Note Language    
    Version    
    Related Notes
    1009949   Central Note for SAP Business One Web tools 2007
    994090   Release Updates on SAP Business One Web tools 2007
    Additional Information
    RELEASE STATUS: Released for Customer
    Released on: 27.03.2007
    Priority: Recommendations/additional info
    Category: Release planning information
    Primary Component: SBO-WEB-B1 B1 Synchronization - SAP Business One Synch Manager

  • Standalone inventory possible on individual workstations?

    We've been using Zenworks Inveontory for some time, and for remote
    inventory
    it does a good job. However, I'm now running into a situation where
    we
    need to be able to do "standalone" inventories, i.e. run an inventory
    on a
    machine that, for one reason or another, cannot be registered or
    imported
    into our Zenworks database, or maybe not even remotely accessed.
    I know there are many 3rd party software utilities that will do this -
    you
    run a small executible on the workstation from a floppy or removeable
    media,
    and it reports the info back to a destination of your choosing. What
    I'm
    wondering is if Zenworks has a component that could be used for this
    type of
    functionality.
    I did find this in a cool solutions page, but I don't necessarily need
    to
    import the info into Zenworks - I just need to run an inventory on a
    "non-connected" machine.
    "Inventory of Non-Connected Machines
    Question: Peter H. wrote: We're about to implement ZENworks 3.0 in mycompany, and are looking forward to it.
    We have approximately 300 machines which will be imported into our
    ZENworks
    database. We also have 50 machines which are placed at our employees'
    homes,
    and these machines are not connected to the network.
    We have the idea that ZENworks is going to be our system to maintain a
    list
    of what equipment our users have, both in the office and at home.
    Is it possible to make an inventory of a machine and then import it
    into
    ZENworks?
    Answer: This is in ZfD4, which will be releasing very soon. "
    Any ideas of using Zen 3.2 to run a "non-connected" inventory?
    Nicoya Helm, Network Specialist
    University of KS Medical Center
    [email protected]

    ahennessy,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Inventory Count upon removal of stock

    Guru's,
    I have a quick question for you experts;
    Inventory counts u2013 I know there are various techniques that we could use within my company but one requirement that was asked about was for that for every pick/removal from a Fixed Bin Storage Type that you had to enter/confirm the remaining quantity left in the bin. The process seemed very extreme in terms of admin for the pickers but it ensured that the picking was 99.98% accurate.
    Any ideau2019s Guru's? We are on 4.7 and running SAP Web console for the warehouse(s) in for putway/picking and Inventory. I realise that there are methods such as 'count when zero & count upon first placement' but this is something different..
    Thanks in anticipation for any help you can give.
    Regards
    Dan

    You can use 2-step confirmation but it is related to the quantity you remove. So, warehouse workers have to confirm the quantity when they remove it from the source bin and they have to confirm it when they place it into the destination bin.
    SPRO > LE > WM > Activities > Confirmations.
    If you want to trigger automatic check of the remaining quantity, it is very propably you have to go to development (I'm not aware of any setting through which you could realize this)
    However, if stock removal & putaway quantities are always accurate (WH workers check only these and not the whole content of the bin), stock in the bins should be accurate also automatically.
    Regards,
    Csaba
    Edited by: Csaba Szommer on Jan 19, 2010 9:16 PM

  • .Mac account delete from  iPhone doesn't remove from .Mac ?

    When I remove an email from the iPhone and do a send and receive it doesn't update the .Mac account that the email has been deleted ? Anyone else suffering this may not just be related to .Mac email ??
    Pete

    pete_franks,
    Is the Mac accessing the .Mac account as a IMAP account?
    If accessing it as POP3 then items won't update.
    I personally use my .Mac account on 2 Macs, 1 Windows-based PC, .Mac webmail, and the iPhone, and items do get marked as pending deletion.
    Are you using Mail.app on the Mac to access the .Mac account? If so you may have it set to show messages that are pending deletion, but haven't been purged from the .Mac mailbox. Pending deletion is a feature of .Mac to prevent accidentally deleting messages. For example if you are going along deleting items on your home computer, and delete a business document you need. With the "pending deletion" status, it is possible to recover that message at work, or through the Trash can on the iPhone. There are two possible ways to resolve this:
    First option is to set Mail.app to store Trash on the server. In which case it will show messages that are pending deletion in the Trash. This is similar to how the iPhone treats pending deletion messages.
    Second option is to go to the View menu, and choose "Hide Deleted Messages".
    If you are using Entourage, and accessing your .Mac account with IMAP. There is an option to hide deleted messages in preferences, otherwise they will show up with a line through them.
    Hope this helps,
    Nathan C.

  • Cannot run vmware installer after manually removing Workstation 10

    So I have an issue with a corrupt vmdk file on a virtual machine build on Workstation 9. The vm will not boot past the Windows startup screen. That is issue #1.  Issue # 2 is I cannot install Workstation 9. Here is the history of my steps. That virtual machine was later upgraded from Workstation 9 to Workstation 10 hardware compatibility. In searching around the forums it seemed like folks who had similar issues uninstalled Workstation 10 and went back to Workstation 9. I used the manually uninstall vmware workstation from the command line instructions. Which advises you to remove all traces of vmware from the various modules and folders and locations. It removed Wksta 10. Now I downloaded Workstation 9 and I am trying to install it from command line.......the process just gets stuck and goes no further. With the message on screen:
    (vmware-installer.py:3378): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
    I have updated the operating system several times with sudo apt-get update. I am running Ubuntu Mint Cinnamon 17.1 fresh install with no gimmicks installed.
    My system info is:
    Intel i5 cpu
    ASUS motherboard
    2 hard drives NO RAID.
    Any assistance would be appreciated.
    Message was edited by: brianwallace
    UPDATE: I checked the vmware-installer.log file and this is what is there. (I ran the installer attempt several times).
    [2015-05-25 01:19:14,942] Installer running.
    [2015-05-25 01:19:14,942] Command Line Arguments:
    [2015-05-25 01:19:14,942] ['/usr/lib/vmware-installer/2.1.0/vmware-installer.py', '-t', '--console']
    [2015-05-25 01:19:14,944] Using UI type null
    [2015-05-25 01:19:14,945] System installer version is: 2.1.0.1369167
    [2015-05-25 01:19:14,945] Running installer version is: 2.1.0.1369167
    [2015-05-25 01:19:14,945] Opening database file /etc/vmware-installer/database
    [2015-05-25 01:19:15,039]
    [2015-05-25 01:19:15,039]
    [2015-05-25 01:19:15,039] Installer running.
    [2015-05-25 01:19:15,039] Command Line Arguments:
    [2015-05-25 01:19:15,039] ['/usr/lib/vmware-installer/2.1.0/vmware-installer.py', '-t', '--console']
    [2015-05-25 01:19:15,041] Using UI type null
    [2015-05-25 01:19:15,042] System installer version is: 2.1.0.1369167
    [2015-05-25 01:19:15,042] Running installer version is: 2.1.0.1369167
    [2015-05-25 01:19:15,042] Opening database file /etc/vmware-installer/database
    [2015-05-25 08:44:30,996]
    [2015-05-25 08:44:31,004]
    [2015-05-25 08:44:31,004] Installer running.
    [2015-05-25 08:44:31,004] Command Line Arguments:
    [2015-05-25 08:44:31,004] ['/tmp/vmis.3ZhRCb/install/vmware-installer/vmware-installer.py', '--set-setting', 'vmware-installer', 'libconf', '/tmp/vmis.3ZhRCb/install/vmware-installer/lib/libconf', '--install-component', '/tmp/vmis.3ZhRCb/install/vmware-installer', '--install-bundle', '/home/bwallace/Downloads/./VMware-Workstation-Full-9.0.3-1410761.x86_64.bundle', '']
    [2015-05-25 08:44:31,113] Successfully loaded GTK libraries.
    [2015-05-25 08:44:31,134] Using UI type gtk

    Hello,
    I'm also in this case. But I run 3.10.20 (LTS). Same error message if I install NVIdia proprietary drivers >319.49
    Due to tearing issues, have to have 331.20.
    Strangely, everything works fine (as user) if I run vmware from a terminal...

  • IPhone Smart Playlist doesn't remove played podcasts

    I have a smart playlist created of my UN-PLAYED podcasts. The rule is set to podcast = true and played count = 0. It used to work fine prior to upgrading to 3.0. I am guessing I am not the only one with this problem but I have seen anyone else comment on this.
    It is very irritating in the fact that if I stop playing my podcasts and come back later. I don't know which podcast to start back with.
    They used to remove their selves from the playlist which made it easy.
    When I re-sync with iTunes, the smart playlist in iTunes updates and then syncs back to the iPhone just fine but it may be days before I re-sync sometimes.
    Does anyone have any ideas or workarounds? Thanks in advance.
    --Mickey

    Well - I finally found my on answer. The trick to resolving this bug is to create a NEW smart playlist. The old one doesn't work for some reason.
    I created with this criteria(better than the one I originally had):
    Criteria
    --Play Count is less than 1
    --Genre contains Podcast
    --Kind contains Audio(lower case in the example)
    Basically gives me all of my PODCASTS that haven't been played. Just the AUDIO ones only.
    Tried it today and it works fine.
    --Mickey

  • Inventory Scans Slow down Workstation

    I'm running ZfD 3.2 and have the inventory policy set to to scan machines
    once a day at 'Below Normal' priority. When inventory runs, workstations
    bog-down, not due to the inventory scanner process, but because the
    workstation's virus scan sofware scans the files as they are opened by
    the scanner. The workstation virus scnan software is McAffee VSE 7.1.
    Has anyone found a way to disable virus scanning while inventory is
    running and re-enable it when the scan is finished? There isn't any
    option on the inventory scheduler to run a pre or post execution script.
    Thanks.
    Pete

    No, not that I am aware of. What happens if you choose a higher
    priority ? Does it change anything ?
    Regards, Kai Reichert
    Novell Support Forums Sysop
    Real programmers don't document. If it was hard to write, it should be
    hard to understand.

Maybe you are looking for