Inventory in MM impossible without paper

Hello,
My client would like to do an inventory in a storage location (no WM-managed) without printed inventory document (with handheld and wifi)
Unfortunately, the transaction to count (MI08, MI04) could not be sorted out or displayed by the storage bin.
It seems that the best practice for SAP is to use paper !!??
Please, does anyone have another solution or an idea why this works like this.
Kind regards,
Sébastien LAURENT

If you created your documents with MI31 and have set that a new document is to be created when the bin changes, then your MI04 and MI08 will only have one bin in the document. However, you are right, it will not be shown in the transaction.

Similar Messages

  • Can oracle inventory forecasting be used without order management??

    Can someone please tell me how oracle forecasts are used.
    Like i have configured and tested it but i want to know how it calculates forecasting and whether it can be used without order management module or not
    when i define item comsumption entries and gvie a quantity in current, the ending date and then see bucketed, it shows same forecasted quantity for all periods that i entered in item comsumption entries
    I dont understand this
    And why is forecasting necessary for reorder point planning
    Some please explain
    Thanks
    Emm

    Query: "can oracle inventory forecasting be used without order management?"
    Yes, in that case it can accept manually entered forecasts or forecast generated from Inventory demand history (say Miscellaneous issue, Inter-org Transfer, Issue to WIP) excluding Sales Order issues (as OM is not included).
    For remaining questions you can refer to my earlier post under the following thread. Please refer to the bottom section (thread was started with a different subject)
    serial attribute and org attribute problems with item master
    If your questions are answered you can mark the thread as appropriate.
    Thanks
    - Supro

  • Inventory Transaction Worker erroring without any log messages.

    Hi,
    When I try to run Inventory Transaction Worker, it is erroring out without any log/output messages. In metalink, it has been mentioned that when there are any garbage characters in the input data, it errors out.
    I checked the input data also. It seems to be fine.
    Could any of you please help me in this regard???
    Thanks.

    HI
    EBS - 11.5.10.2
    OS - AIX 5.3
    This was working fine before and working fine in PROD.issue is in cloned instance
    Initaillial I was getting following error
    This concurrent manager cannot run the following registered, immediate
    concurrent programs because they are not linked to this concurrent
    manager's library "INVLIBR"
    Cause: The immediate concurrent programs listed have been registered
    th
         Application Concurrent Program
              INV INCDCM
              BOM CMCCTM
    Followed the note you provided and started getting error as mentioned in pervious post.
    Now I am not able to add WICTWS to lib 'INVLIBR' as its of PL/sql type executable
    Thanks

  • IWork '09 without paper manual and serial

    I just bought a copy of iWork '09 in a retail store, and noticed two thing:
    - it has no paper manual (version '08 had the manual, instead)
    - it has no serial coded (infact I installed if and was not prompted about the serial code; version '08 needed it, instead).
    Is this normal?
    Thanx

    Hi FeliceMente,
    Welcome to Pages '09 discussions.
    In Pages, Keynote, Numbers, click Help, in there you'll see a <program name> User Guide. You can download it from within each program. Cost savings for us and saves trees.
    Here's a link to the Apple site as well:
    http://support.apple.com/manuals/#macosandsoftware
    These Discussions are enduser helping enduser, not Apple employees answering questions. Apple provides these discussion forums for endusers however, Apple neither monitors nor engages in discussions. Enduser such as yourself when they have extra time answer questions.
    Again, welcome to Pages '09 Discussions, have fun here.
    Cordially,
    RicD

  • Permanently deleting iPhone text messages... impossible without 3rd party software?

    Am I correct in assuming there is currently NO possible way to permanently delete iPhone text messages and attachments unless you without either A. using 3rd party software that costs loads of money, or B. completely wiping your phone? This is seriously not available on these phones with all the other advanced features and tech?
    It saves gigs of txt messages and attachments permanently that takes up all of the space on your phone... I just have a hard time believing this issue hasn't been addressed....

    If the amount of storage for your Messages is not decreasing when you delete some (or all), then you need to try resetting your device to see if it will clear it up. I just went to my device and checked the amount of storage being used by Messages (13 MB). Then I deleted the 6 messages I had, and went back to check the Usage. It is now 3 MB.
    To reset your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Slide to Unlock screen displays, check your usage again.
    Cheers,
    GB

  • Firefox does not close properly making reopening later impossible without rebooting computer.

    I live in Texas and my sister lives in Georgia. We are both experiencing problems with closing Firefox. It appears to close properly but when I try to reopen later in the day, my computer tells me that it is still running in the back ground and cannot be reopened. I tried upgrading to the latest version but the problem persists. When I go into Task Manager, I can't find an entry for Firefox to close out.

    Press '''CTRL+SHIFT+ESC''' to open Task Manager, go to the '''Processes '''menu, right click on '''firefox.exe''' and choose '''Kill Process'''.
    When you finish a browsing session, go to '''File '''| '''Exit '''to close it if the problem persists.
    Try disabling the McAfee Virtual Technician plugin via '''Tools '''| '''Add-ons''' | '''Plugins'''.
    Update Flash player: [http://get.adobe.com/flashplayer/ Download Flash player 10.2.159.1] See also: [http://www.h-online.com/security/news/item/Adobe-releases-security-update-for-Flash-Player-1228930.html Adobe Security Update closes Zero Day Exploit]
    Update Java via Windows Control Panel | Java | Update Now
    If the problem persists in spite of the above steps, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

  • Queires on Non-Cumulative Inventory Management Cube 0IC_C03 Not Working

    Hello all.
    I am trying to use the 0IC_C03 Inventory Management cube with non-cumulative key figures.  I followed the How to...Handle Inventory Management Scenarios in BW paper to a tee.
    Steps I followed:
    1.  Ran initialization of beginning balance with 2LIS_03_BX
    2.  Ran the historical job with 2LIS_03_BF
    3.  Uploaded to BW the Initialization (BX) and compressed without setting the "No Marker Update" flag
    4.  Uploaded the historical movements (BF) and compressed setting the "No Marker Update" flag
    Now, to this point, everything was fine.  Quantities were as expected.  Dollar values were as expected.  The problem occurs once I load deltas:
    5.  Loaded delta for 2LIS_03_BF and compressed without setting the "No Marker Update" flag as instructed in the How To... paper
    Query example:
    MATERIALA: 
    Initial Stock Balance = 1000 EA
    Delta had stock issue of 150 EA (so the stock balance should have decreased from 1000 to 850)
    Now, I have the record in BW showing the stock issue of 150.  However, the non-cumulative key figure within the query still shows 1000.  And when I drill down by calendar day, I would expect the result to show 850, but it seems to add the 150 before taking it away resulting in 1000 which is actually the initial stock balance.  It is like it is not recognizing the updates.
    Any help would be appreciated.
    Thanks,
    Brent

    Hi!
    Here is what helped in my case, very similar to your:
    In DTP for 2lis_03_bx (not only in infopackage, as it is said in manual!) you have to change "Extraction Mode" parameter to "Initial Non-cumulative for Non-cumulative values"

  • Is it possible to upgrade on a new HD without original installation disk?

    My situation is a little complicated.
    I've had my MacBook Pro for almost three years. For the past few months, I've been having some problems with a very loud droning, buzzing sound coming from the lower-right quadrant. I can only use my computer for a few hours to watch or edit videos before it starts making this noise and I have to shut it down. I posted about this a couple times before and the only response I got was that my hard drive probably needs to be replaced. So since I, nor anyone else, seems to know what the problem is, I'm probably just going to do that. This is where it gets complicated.
    My original installation disk for Tiger is, presumably, at my parents' house 1500 miles away, if it still exists at all. I want to upgrade to Leopard anyways (so I can play Sims 3), but I think that it's pretty much impossible without the original disk for Tiger. I figured I would need to use my Tiger disk to set up the new hard drive, and then upgrade to Leopard straight away. Is there any possible way to install Leopard on a new hard drive without having to buy the full system (not just the upgrade)? I was thinking I could call Apple and beg and plead for a replacement Tiger disk, but I would probably just be wasting my time.
    I'm starting to think that my situation here really is hopeless and my computer will never be able to be useful to me again.
    Any help would be greatly appreciated.

    Thank you for the speedy reply. That looks like just what I was looking for. I'm going to go buy that right now and I hope this is the end of my searching for a solution. Thanks so much.
    I have one question though (it may be stupid, but I'm not very literate on Macs): will the program back up my whole operating system or just my files? Like, will I be able to install the OS from the backup?
    Message was edited by: yosly

  • Paper tray won't close

    HP Color LaserJet CM2320nf MFP  printer:
    So, I put more paper in the paper tray and closed the drawer as usual. Only the drawer will not close. I have looked inside to see if there is anything visible that would prevent it from closing. I see nothing.  Without paper, I can't print easily (just with a couple pieces of paper).  This is wierd. Has never happened before.
    I have turned off and on the printer, not that that would help -- but the paper tray will still not slide into the printer.

    Hi tonjalr,
    Welcome to the HP Forums!
    I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps.
    I worked on behalf of HP

  • Indication of documents about Inventory management in BW

    H
    I've got this excellent document "How to handle inventory management scenarios in BW". Very clear, easy to understand.
    I'd like to go into more details about 2LIS_03_BX (initialization of the current stock), compression of requests and marker update.
    Does anyone have indication of other documents that deal with these subjects?
    Thanks in advance
    César Menezes

    Hi Cesar:
    Please refer to the documentation below:
    "10 important points to consider while working with inventory management", blog by Ranjit Rout.
    /people/ranjit.rout/blog/2009/06/14/10-important-points-to-consider-while-working-with-inventory-management
    "Non-cumulatives / Stock Handling"
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31?quicklink=index&overridelayout=true
    "BI Inventory Management- Data Loading", paper by Gaurav Kanungo.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/906b837a-0d54-2c10-08b8-bde70337547e?quicklink=index&overridelayout=true
    "Inventory Management (0IC_C03) Part - 1", paper by Surendra Kumar Reddy Koduru.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60101663-3cb7-2c10-3687-8d1e0ef51b0d?quicklink=index&overridelayout=true
    "Inventory Management (0IC_C03) Part - 2", paper by Surendra Kumar Reddy Koduru.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0783925-f4be-2c10-9c89-ffa108f72547?quicklink=index&overridelayout=true
    "Inventory Management (0IC_C03) Part - 3", paper by Surendra Kumar Reddy Koduru.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e00860a4-350f-2d10-29a0-fc09681a8bae?quicklink=index&overridelayout=true
    "Inventory Management in SAP BW", article by Harishraju Govindaraju.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9054ac59-aac4-2d10-3d9b-df98c52b4f31?quicklink=index&overridelayout=true
    "Loading to the Inventory Cube 0IC_C03", blog by Akshay Chonkar.
    /people/akshay.chonkar2/blog/2010/05/19/loading-to-the-inventory-cube-0icc03
    "Insights into Cube compression", blog by Arun Varadarajan.
    /people/arun.varadarajan/blog/2008/08/19/insights-into-cube-compression
    SAP Note 643687 - "Compressing non-cumulative InfoCubes"
    SAP Note 745788 - "Non-cumulative mgmnt in BW: Verifying and correcting data"
    SAP Note 1548125 - "Interesting facts about Inventory Cubes"
    Regards,
    Francisco Milán.
    Edited by: Francisco Milan on May 7, 2011 12:08 PM

  • Runnig Report without Layout

    Hello everyone,
    I am running a report in 10g (10.1.2) on the report server. This is for a Drill down report. So my master report contain some code that will run the detail report couple of time but my main report does not have to print anything since everything is managed by the detail report. Actually i had to put some dummy query the make the master report printing a blankpage, is there a way to create a Report that don`t need to print any output. I tried using the parameter blankpage=no and it change nothing.
    Any help appreciated
    Thank

    To which format you are running the report? Are you printing the report directly?
    If you create a report without paper layout, it will produce a blank page. I dont think you need to put dummy query. What is the problem you are facing?

  • Paper source auto-select problem

    Hi, I just set up a new MF6160DW, on a Windows 7 PC, and it seems to work well except for 1 setting I can't understand. I'd like the printer and copier to use drawer 1 for all printing, but to auto-detect paper in the multi-purpose tray, and prioritize that source whenever paper is present. The default settings in the Windows "Devices and Printers" for the UFRII LT driver "Preferences" Paper Source is set to "Auto". When I use the 6160's Menu-> Common Settings -> Printer, the only option shown is for Drawer 1, no multi-purpose tray. For copying, I've been able to set Multi-Purpose tray priority, but copying is not possible without paper in that tray (i.e.: it won't automatically shift to Drawer 1 if the MP tray is empty). Any suggestions would be appreciated. Thanks, Pableau

    Hi Rich:
    Point One, your are working with two sources of page setup information - 1. The print information that is set in the printer control panel. 2. The print information that Word Page Setup sends to the printer overriding the printer internal defaults. Word remembers printer setup by each document. I have been trying to get a definition of the different items under Word page setup with out sucess.
    I would setup the printer control panel defaults as you woul use the printer from you web browser for printing or as you would use the printer as a stand alone device. Using WORD, use the page set up menu and direct the document to be printed by using Tray 2 Legal and Tray 1 as letter or envelope as an example.

  • Conversion for goods receipt includes inventory

    Conversion for goods receipt includes inventory uploading with and without batch management,, How can i do this

    Hi,
    You can use separate G/L account for Factory Output Account for Goods Receipt on Finished Goods Inventory and Variances.
    goto OBYC T.code do the following settings.
    GBB-->AUA-assign gl account
    PRD-->PRD-assign gl account.
    one question from my side.
    If you are using same account for both entries, where do you assing GL accounts in OBYC?
    Thanks,
    Rau

  • My MX892 is clicking and can not draw paper - I get a load paper error message - any suggestions?

    My MX892 is clicking and can not draw paper - I get a load paper error message - any suggestions?

    Hi keciakh,
    To try and get the paper to feed, with a flashlight or other bright light, please check the paper feed area of the printer and verify that there are no paper jams or obstructions in the printer that may be causing the error.   Once this has been done, please look inside of the printer where the inks are located and ensure that there are no obstructions in there that may be causing the print head not to move freely.  Next, please remove and reseat all of the ink tanks in the printer.  Once all of these steps have been performed, please follow the steps below to perform a roller cleaning on the printer:
    You need to prepare: three sheets of A4 or Letter-sized plain paper  
    1. Make sure that the power is turned on. 
    2. Open the paper output tray gently. 
    3. Select Roller cleaning.
    (1) Press the MENU button.
    (2) Select Setup, then press the OK button.  The setup menu screen will appear.
    (3) Select Maintenance, then press the OK button.  The Maintenance screen will appear.
    (4) Select Roller cleaning, then press the OK button.
    The confirmation screen will appear.
    (5) Select Yes, then press the OK button.
    (6) Select the paper source to clean (Rear tray or Cassette), then press the OK button.
    4. Clean the paper feed roller without paper.
    (1) Follow the message to remove any paper from the paper source you selected in (6) of step 3.
    (2) Press the OK button.  The paper feed roller will rotate as it is cleaned.
    5. Clean the paper feed roller with paper.
    (1) Make sure that the paper feed roller has stopped rotating, then follow the message to load three or more sheets of A4 or Letter-sized plain paper in the paper source you selected in (6) of step 3.
    (2) Press the OK button.  The machine starts cleaning. The cleaning will be complete when the paper is ejected.
    (3) When the completion message appears, press the OK button.  The screen will return to the Maintenance screen.
    Reference
    To access other available functions, use the mode buttons or the MENU button.
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • LMS 3.2 Inventory Collection Failing

    Inventory collection is failing without any detailed error information.  I'm attaching IC_Server.log. Example device is 10.79.82.250, towards end of log. I see these messages but not sure what to make of them. SNMP communication is ok and walk of system mib is ok.
    [ Fri Dec 11  09:37:29 EST 2009 ],INFO ,[Thread-21],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventorySatellite.SatelliteHelperMethods,isVirtualMibSupported,32,
    cisco virtual mib,exception while interpreting cvsChassisMode value
    com.cisco.nm.lib.snmp.lib.SnmpValueException: Illegal Access. NoSuchObject being accessed as Integer.
    [ Fri Dec 11  09:37:29 EST 2009 ],INFO ,[Thread-21],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventorySatellite.SatelliteHelperMethods,isVirtualMibSupported,32,
    cisco virtual mib,exception while interpreting cvsChassisMode value
    com.cisco.nm.lib.snmp.lib.SnmpValueException: Illegal Access. NoSuchObject being accessed as Integer.

    Go to RME > Devices > Device Management > RME Devices, and edit the device attributes for this device.  Change the SNMP timeout to 10 seconds.  Make sure you apply the changes you make.  After doing that, inventory collection should work.

Maybe you are looking for