Inventory in storage bins should not be allowed to go negative

Hi
Inventory in storage bins should not be allowed to go negative?
Regards
Vivek

you can uncheck the "Allow negative stock" for the combination of warehouse and the storage type.
Path is-
SPRO > Logistics execution > Warehouse management > Stock removal startegies.
Then select your strategy.
Check out if it helps.
Regards,
nilesh

Similar Messages

  • Storage bin should display in MB52

    Hi All,
        Storage bin should display in MB52  T-code warehouse stock dispaly, Please guide me how it possible...
    Regards
    Hari

    Hi Hari,
    MB52 Tcode is only for display stock in Inventory Management Level/ storage location level. If you want display stock in storage bin level, you can use t-code :
    1. LX03   - Bin Status report
    2. LS26   - Total Stock per Material (Warehouse Management)
    3. LS24   - Bin Stock per Material
    I hope it can explain your problem.
    Pls rewards point if helpfull.
    Thanks
    Gunawan

  • PO RELEASED IT SHOULD NOT BE ALLOWED TO AMMEND

    Sir,
    once po is released it is should not be allowed to edit.
    how can i configure this
    regards
    amey

    Hi Amey,
    Once PO is released it cant be Changed it can be done by doing the following setting in SPRO.
    SPRO>Material Management>Purcahsing->Purchase order->Release procedure for purchase order--->Define release Procedure for the PO
    In this Release Stategy config there is option called Release indicator
    where in we have to define a release ID and this release ID ( Eg A ) has to be given 1 cannot changeable in the feild in chagble--for the allowing no changes in PO after release and then we have to go to release Strategy option we can select the release strategy we want the change and in the Strategy
    click on the release status and in this status we can give the ID defined earlier ( at which level what effect should come)
    hope so it helps
    regards
    Anjanna.

  • Production Order Usage Probability should not be allowed to change after GI

    Dear Gurus,
                  pls tell me how to do this ,Production Order Usage Probability should not be allowed to change after Goods Issue (GI) done against Prod Order . pls tell me procedure or any UserEXit for this.
    Thanks in Advance,
    Regards,
    Dev

    Hi,
    Can you elaborate little bit more?
    Regards,
    Sankaran

  • Zero quantity should not be allowed for STO delivery

    Hi,
         zero quantity should not be allowed for STO delivery.
         when i create a delivery for a STO it should not allow zero quantity
         can someone throw some light.
    Alec

    Hi,
    Please maintain the "B - Create Delivery with qty greater than Zero" in Part.dlv./item  in shipping tab page of the customer of site.
    more briefly: in WB02 --> click on the customer of the site --> Shipping Tab page --> Maintain B (Create Delivery with qty greater than Zero)
    Regards,
    Srini

  • User should not be allowed to login 2 times to an application from same m/c

    Hi Everyone,
    I have to find all possible solutions to below problem:
    Problem: User should not be allowed to login 2 times to an application from same machine.
    Steps to produce the problem:
    1) User 1 logins to application.
    2) User 1 tries to login with different credentials from same machine.
    3) User 1 should be presented with a message that he cannot login from same machine using 2 browsers.
    4) User 2 tries to login to application with credentials of user 1. System should now display an alert to both users on System 1 and System 2 of this conflict.
    Please share your thoughts regarding above problem.
    Thank you
    Edited by: rishab.garg on Feb 25, 2009 10:53 PM

    When a user logs in to application flag it in database. Irrespective of client machine and browser when another user tries to login using same user id you will be able to identify that easily using stored flag against the user id.
    If you want to distinguish between client machine for displaying different messages you can easily do this by comparing client IP address. To obtain client IP address use:
    request.getRemoteAddr();Note that getRemoteAddr() might return last proxy machine's IP address (in case proxy is used) instead of client's machine. In that case you may consider using cookie (though using cookie is not a great idea).
    Thanks,
    Mrityunjoy
    Edited by: mrityunjoy on 28 Feb, 2009 11:43 PM

  • BOM editing should not be allowed while creating P.O./ Scheduling agreement

    BOM editing should not be allowed while creating P.O. / Scheduling agreement

    Hi,
    I think that when you create a subcontracting PO it READS the valid BOM, so there's no locking. From a business point of view you need to question such a requirement, since in SAP you can have many kinds and types of BOMs. Then what if one of the BOMs is open in change mode (edited) exactly when you try to create the order? It should not allow you to create the order? Why?
    Regards,
    Mario

  • Storage bin are not found

    Hi Gurus,
    Could you please help me for my query. We are doing Outbound deliveries for Stock transport orders and we TOs are creating
    through VL06O. and some time we are using LT01 to move the material form bin to bin and while confirming the TO system is
    giving the error, storage bins are not found but bins are there.and what is the reason for this and how to resolve this.
    2. One more Query:
    What is the use of LT10 (As i know it is for the bin to bin transfer).
    but we have LT01, here also we can transfer bin to bin. what is the main difference. Plz explain
    I will appriciate your help.
    thnx
    raghu

    Hi
    Find below the answer of your Q
    1) Check the storage type defined into the WM1 view for the same material. Check the availability of bins in the same storage type
        if both are matching then check the weight parameter of the storage bin and the pallet which you are planning to move into the 
        Bins
    2) LT01 is for single line item whereas LT10 is for collective processing
    Regards
    Manish

  • Storage bin does not exist error when during transfer posting in MB1B

    Hello All,
    I am getting the error message "  Storage bin [WH no, Storage type] does not exist Check your entry"  during transfer posting in MB1B from one storage location  to another for ex 0007 to 0001. But i can able to do transfer posting from 0001 to 0007 without any error.
    Please provide your solutions/suggestions
    Thanks
    Benny

    Benny Sampath wrote:
    Here is the error message "Storage bin 56A 870  does not exist (check your entry)"
    >
    > Thanks
    > Benny
    I can only see 2 values instead of the expected 3.
    what is 56A ? is it bin, warehouse or storage type?
    what is 870 ? is it bin, warehouse or storage type?
    one variable that is need  to have a hit in table LAGP is missing, hence you get this error.
    you have to find out why this variable is missing.
    But there is a wide area to look. Hence you should first answer the questions, as this would limit the options where to look.

  • QM system has expired, MIGO should not be allowed

    HI All,
    If the vendor QM Sytem has expired ,then the sytem should not allow posting of goods receipt (MIGO) by using the functionality of Quality Info record or any other methods of control like vendor master or purchasing info record.
    Please provide your valuable suggestions
    Thanks & regards,
    rajesh

    The QM system is only designed to control the creation of the PO against vendors with the specifiied QM system. 
    If you want to block receipt at the time of MIGO, you will need to use a MIGO user exit to do a check against the vendor's QM system to verifiy it ihas not expired since the purchase order was created.
    FF

  • Storage bin does not exist

    Hi Experts,
    While doing the goods issue while confirming the production order (Mvt 261), i am getting error message for the component " Storage bin 01 does not exist (check your entry)   Message no. L9 009"
    I dont know why it is only checking storage bin as 01, where as stock is maintained in other bins also,
    Whether i am missing any point in this.
    Pl help.
    regards
    Utsav

    Hi,
    Find out why movement type for a component is looking for 01 as storage bin.
    I am also finding out this issue.
    It must be some fixed bin assigned at storage type level in material master.
    I checked in MMR, but no fix bin is assigned in WM2 view. Field is blank. No entry is maintained.
    Or check movment type setting what is the source
    Where to check this?
    Also check any storage bin created for production supply storage type.
    Where to check this?
    Also youmay need to check any special Movement indicator in material master WM 1 view.
    This field is blank in MMR.

  • PR derelease should not be allowed after  PO creation

    Dear Friends
    I have created a PR, released , then PO is created with reference to PR. After that I came back to me54n and cancel the PR release. As per our Business Practice it should not allow to cancel the PR release after PO creation.
    I have maintained message 06 076/06 400 and 06 608 as error message.
    The changeability indicator is also maintained as '1' against the release indicator'2'.
    I don't want to go for any Badi implementation or user exit. Is there any solution in standard SAP
    Thanking you
    Tapan

    Even I tried this testing but it seems like not working. I this is standard SAp behaviour. 
    Check this OSS notes 493900
    1. Question :
    Why can I modify a purchase requisition although I set the changeability of
    the release indicator to '1' ('Cannot be changed')?
    Answer :
    The purchase requisition is not modifiable via a purchasing transaction
    like ME52 or ME52N. But it is possible to change the purchase requisition
    from any other external application like sales order, planned order,
    maintenance order or network.
    The Changeability functionality only concerns the purchasing transactions.
    This is intended and a new release strategy determination takes place if
    there is a modification of the data in the external application.
    But logically why the user is cancelling the PR after PO creation? Even if they cancel the PR it doesnt impact the PO which is already created. Even if they cancel and re release the PR and try to create a new PO, system wont allow you to create new PO stating that PR is already ordered. Even though it looks strange but it doesnt harm the procurement.

  • Issue :Storage bin is not trigger in TO

    HI
      I have totally two storage bin, i did PO- GRN, iam trying to do trasfer order . but system is not trigger storage bin during the
    transfer order
    1) how many  storage bin required for creating transfer order.
    2) iam trying to manage stock in one storage bin ,is it possible ?
    with regards
    dinesh

    Hi,
    yes, you can use one storage bin till u don't have mention capacity of bin.
    WM bin search strategy
    Storage Bin Search Strategy is failing
    http://help.sap.com/saphelp_470/helpdata/en/c6/f83fe54afa11d182b90000e829fbfe/content.htm
    Kuber

  • Re-extraction should not be allowed in J2i5

    Hi friends,
    I have this business requirement that data should not be re-extracted once the extraction is done
    in J2I5 .
    I did not find any  User_exit or BADI for the same .
    Can anybody suggest me how can i go about it.?

    You can copy the program to a Z program and check whether the excise registers are already extracted with the given date or not.
    You can make use of Last extraction date button on the input screen to validate the data on the input screen.
    Regards,

  • Sales Order item should not be allowed to modify after doing PGI.

    Dear all SAP experts,
    When i create a sales order say for 10 pieces. Now I have created the delivery for all the 10 pieces & also created the invoice.
    My requirement is when i create a delivery for all 10 pieces then after doing the PGI the system should make the sales order line item & qty "grey" - I should not be able to change the sales order item in any respects.
    If not from delivery then when i save the invoice for that sales order then I should not be able to modify the sales order item & qty.
    With best regards,
    Allabaqsh G. Patil

    Hi
    I think there can be a problem in copy control
    In copy control at item level, in teh item category, ensure that the field "Update document flow" and the Pos/neg quantity are properly updated.
    Update document flow shoudl be ticked on
    Pos/neg quantity should be positive.
    Before doing this , check teh document flow of the sales order. Do the same after doign this configuration. Note the difference.
    This will solve your problem

Maybe you are looking for