Inventory load using 561 movt type and auto confirm TO in MB1C using 561 movt type
Hello All,
I am doing the inventory load using 561 movt type in MB1C. Then the material is in 998 storage type and bin "AUFNAHME". my requirement is that i want to confirm the TO, when i do the MB1C itself for the 561 movt type. Is there a way in the SAP, where i can trigger the TO confirmation in the background automatically, when i use 561 movt type in MB1C.
Right now my thought processing is that as below,
i create the inventory load using 561 movt type in MB1C and use the LT10 and move the stock to a different bin and confirm the TO.
In the above step, i am using LT10 as a extra step for confirming the TO, which i am trying to decreasing my configuring in such as way for the movt type 561, so that it will automatically confirm the TO in the background, while doing the MB1C.
My 2nd question is, when i have 5000 different materials, which are inventory loaded using 561 movt type and MB1C. I am trying to auto confirm the TO in the background, when doing the MB1C for 561 movt type itself.Secondly, if it doesn't work, then i can goto LL01 and pick the unconfirmed TOs and mass confirm the TO's.
On the whole, my questions are is there any std config in SAP to auto confirm the TO for movt type 561 in MB1C. If it is not possible, then i need the best way to mass confirm the TO's in SAP.
Thnks,
Kapil
Hello Kapil,
Let me explain the process step by step
Assumption/mandatory criteria- The process is applicable only in case you do not have storage unit management active This process is warehouse transfer w/o WM transaction. This method is based on principle of MB1A- 711/712 movement type.
(1) Use OMJJ and create new movement type by coping 561 for ex- "Z61". In field selection (flield selection from 201) double click on WM and make the entry "WM storage bin and storage type as required entry from suppress.
(2) Now use MB1C with above customised movement type. At the end of this transaction,system will take you to the screen to make an entry in storage type and storage bin. Post the entry.
That's it. Your stock would be in warehouse as well as IM stock would be in sync. There is no TR/TO. You can create LSMW to upload the data by this method. If you have SUT defined then you can follow the same process as above. But after that do not forget to update LQUA-LETYP field with respective SUT. However, you can not use this method in case you have SU management active.
My view with this upload process- Please use other data uploading method which are not at all time consuming. In more than 90% of most of the business scenarios, storage unit type is used. Hence you will have to perform additional activity of updating LQUA-LETYP-storage unit type field. If this is the case, then why cant you use other uploading method?.
Thanks,
Milind
Similar Messages
-
There is a certain website I use that I refresh frequently. Every time I do I get a pop up message labeled ‘Confirm’ with a question mark in it that says;
“To display this page, Firefox must send information that will repeat any action (such as a search or order confirmation) that was performed earlier."
It only seems to be a problem with this one particular site. Are there any settings in the options (or anywhere else) that I can use to set up an auto confirm and resend without having to manually click the ‘resend’ button in the pop up window?Hi cor-el, Thanks for responding;
I am accustomed to seeing this type of pop up on occasion and understand why they are necessary to prevent duplicating orders, payments, etc. I am not using a back button, I wanted to use an auto-refresh app to search for reservation openings on a certain web site and can not because this pop up requires me to manually push a button every time the page refreshes. I am resending the same information every time (a date range) via the POST form, so, was hoping there was a way to either disable, override, or set up and auto response so I can use the auto-refresh app. Your description of how to avoid the pop up didn't entirely make sense to me, but If I have to do a bunch of manual steps in between each refresh attempt it doesn't matter because I'm no better off. -
Im using xcode 4.6 and im having problems reading files using the fopen function in c
Im using xcode 4.6 and im having problems reading files using the fopen function in c
Yes, but that would not cause the "build failed" message.
right I missed that part. Looks like two problems then.
// main.m
// ASCTestFopen
// Created by Frank Caggiano on 3/2/13.
// Copyright (c) 2013 Frank Caggiano. All rights reserved.
#import <Foundation/Foundation.h>
#include <stdio.h>
int main(int argc, const char * argv[])
@autoreleasepool {
FILE *fp, *fopen();
// insert code here...
if((fp = fopen("~/test.txt","r")) == NULL)
NSLog(@"open failed");
return 0;
This will compile ad run in Xcode with a project type of comand line tool -
I am using both PSE 13 and Lightroom 5. When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different. Why doesn't it appear edited?
People who have Photoshop, but don't have Lightroom, need ACR so that they can use Raw files. Without ACR they could do nothing with those (they may also like having ACR so that they can work on other kinds of image using the same kinds of adjustments and techniques, as are used with Raw files).
People who have Lightroom, can get access to Raw files regardless whether ACR is present or not. They can use Lightroom on other kinds of image also, using the same methods. LR can pass images directly into Photoshop without passing via ACR (or else does so transparently, which amounts to substantially the same thing).
ACR does not, strictly speaking, even need to be installed for this external editing to happen. In fact, not even PS needs to be - since a different image editor can be used instead, while still retaining the Adobe Raw conversion etc.
Lightroom "subcontracts out" specialised external tasks, in this workflow, but is still your "main contractor": the image is otherwise located, viewed, managed, adjusted/presented and output entirely using LR.
So IMO we can divide image processing into:
operations that involve pixels and layers and layer masks and adjustment layers etc (of the kind done inside Photoshop)
operations that involve parametric edits (of the kind done in ACR where you are not using a Lightroom based workflow; otherwise, done inside Lightroom)
When PS is called in, that's because those tasks are impossible or unsuitable to do in Lightroom. But those tasks can't be done in ACR either - by definition, since LR and ACR have exactly the same image processing "feature set".
Lightroom is irrelevant to the Bridge + ACR + PS workflow. This workflow requires both your PS and your ACR to be current enough, to support your Raw format etc.
ACR and Bridge are irrelevant to the LR + (image editor) workflow. It is in this case, only LR which needs to be current enough to support your Raw format etc.
RP -
I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents? I am planning to transition to a Mac so using the iCloud seems to make the most sence.
No, it is not a backup method at all. If you delete a sync'd file on any device, you delete it permanently from iCloud. That by its very essence is not a backup solution therefore. A backup solution does not automatically and simultaneiously delete the file everywhere when it is deleted from the original source.
iCloud is strictly a syncronization tool for using files on multiple internet connected devices. -
Itunes will not play a number of songs in my library as they were purchased a long while ago using an email address and ISP that I no longer use. When I try and play them I get the message "this computer is not authorised to play this song, authorise your computer now". Any ideas?
Hello, quckvic.
Thank you for visiting Apple Support Communities.
You will need to reset your Apple ID password via the steps in the first article below. Take a look at the option that refers to answering the security questions. Since you do not have access to the email account and if you are unable to answer the security questions, see the second article.
If you forgot your Apple ID password
http://support.apple.com/en-us/HT201487
Contact Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H. -
How can I disable the loading of the Warp Stalibizer and Auto Color Plugins?
I'm having trouble with a project of mine.
My main project file refuses to load because Warp Stabilizer and Auto Color crash when invoked.
I believed it was a file IO problem, but when I removed the external drive where the footage was, it gave me the same errors.
So I'm hoping that disabling the plugin loadin at AFX startup will restore my ability to load the file and retrieve my comps.
the exact error messages are:
'After Effects error: crash while invoking effects plu-gin "Warp Stabilizer".'
and
'After Effects error: crash while invoking effects plu-gin "Auto Color".'
and
'After Effects error: Crash in progress.Last logged message was <5540> <StateBinaryConverter> <5> solveCompleteB = 1'
Then it offers me to save a file and the resulting file has 0 KB...
Anyone can help me with this?
thx in advanceI just moved the plugin files AutoColor.aex and Stabilizer.aex to another location temporalily.
I removed the effects references and replaced the .aex files in their previous location.
Now I can open my project just fine. -
Firefox takes a long time to load, even with add-ons and auto-update disabled
When opening firefox it takes a long time (1 minute +) to load. The computer does not display any indication that firefox is loading (often leading to 2, 3 or 4 instances of Firefox trying to start due to my impatience).
My OS is Windows Vista 32 bit
Firefox is v4.0.1Can you check your Windows Firewall settings? It's possible that it's routing Firefox requests differently. At least one other Firefox user has reported that his Windows Firewall was set to block Firefox 3.6.
-
I have been an Apple User for almost two decades and have had no problems with my G4 Powerbook, my Intel MacMini, nor several other Macs as well as Windows 7 machines. However, the IPAD2 poses a problem of unfathomable disgust with the concept and implementation of the Apple ID. There is one for the computer, there is one for support, and there is one for itunes, and possibly another one for apps. There are different passwords for each. I am continually faced with notification that my Apple ID is incorrect or the password is incorrect. I have to keep an Excel spreadsheet with all of this unnecessary NANNY State protection matched only in pervasiveness by the Federal government.
I am told that an Apple ID can never be destroyed and replaced. Who dreamed that one up? I am told I cannot use a password that has been used in the past year. Why? By whose authority? I am not a walking encyclopedia that remembers every telephone number he ever dialed. Thankfully my cheap LG clamshell telephone keeps numbers and talks to Ford Sync successfully.
Bottom line is that the IPAD has become almost totally useless since I cannot change the several necessary passwords to anything I can remember because they are not novel enough. I also never seem to be able to keep the Apple IDs straight as they are too numerous to remember and I don't want to remember them anyway. Why? Even if you enventually get the ID right you have the wrong password and have to go through a merry-go-round of emails to change the password to something you have already used in the past year which is not permitted.
Has anyone out there used a competitive device with less cumberson overhead? Surely this is not the best American technology can produce.
Thanks for your comments.
Ray ZacharyThanks to all who responded. You are all absolutely correct. However, this Ipad was a gift to my wife who was dying of cancer in the hospital and wanted some entertainment. So I started it out with her Apple ID. After she passed away I moved from Sacramento to Austin and eventually proceeded to get the Apple ID changed from my wife's to mine. Meanwhile when she was in the hospital I opened an Itunes account in my name to buy movies for her. That was the first mistake.
Then during the move to Austin I lost track of the IPAD and later found it and tried to use support but could not remember the proper ID. Later the folks at the Apple store helped me create a new and novel Apple ID that was unfortunately unlike any other.
The botom line is that I am stuck with three Apple IDs and three passwords. I am told by Apple there is nothing they can do about this as IDs cannot be changed or destroyed. I can quit using them or start a new account but when I try to do that the system keeps remembering too many things from the past and resists.
Even if I sold this Ipad and bought a new one, the system memory is still there.
I think the real problem is that destop and laptop computers are totally owned by an individual and that individual can control logins and passwords to his liking. IPADs and similar Apple products are different in that the corporation has built in their own intrusion detection schemes because of the relation to Itunes.
One thing I thought about is to open a new Itunes account pretendding to be a new customer with my regular Apple ID. Perhaps I could do the same with Apple Support.
Thanks for your comments.
RAZ -
How do i use activeX to open and display a MS Excel workbook using LabVIEW?
I have created the attached vi to try to display the excel file ODSHelp.xls however when it is run nothing seems to happen, if you run it again you get a message saying that it is already open.
Attachments:
activeX_for_excel.vi 27 KBYou can use the activeX container to do that and one more thing is if you want to open an excel file in a front panel, try to put your data in table and I think this is more easier. Open your excel file and get the data and put it into the array and from there you can easily connect to the table. Hope this will help.
Best Regards,
Saw Naing Aye -
So very excited bought iPad and new speakers today! Want to get all my music sorted as across iMac (G5), MacBook os 10.6 (maxed out ram and memory) and old iPod. Saw Match would be an option but can't use due to old OS so I can get the raw music library files but then what do I do to get all in one place? Any help appreciated.
A good route would be to attach a USB drive to the macbook. You can use the drive to assemble a copy of all of your music from your various devices. iTunes on the macbook can be used to create a new library, located on the USB drive, into which you can import all of your music.
Two major benefits:
1. From here you can run iTunes Match across your entire music collection; and
2. You will have created a full local backup of all of your music on the USB drive.
Once complete you will be able to access the music from any iDevice capable of running iTunes Match, Do remember as you add music it is important to maintain a local backup in order to keep your music safe. -
Can I stream videos using airplay to appletv2 and play the audio thru stereo using airport express?
I have apple tv 2 connected to my HDTV. I am streaming VEVO videos from iphone to ATV2. Would like to play the audio through my sony stereo. Would love to do it wirelessly if possible. Can this be done? Would airport express connected to stereo make this possible? If not what are my options.
The only input ports I have on the stereo is a dmport, auxillary and headphone jacks. I really would like to do this wireless. If, instead of appletv2, I had google tv which VEVO uses could the airport express be used? Seems like I recall reading somewhere that using 2 of them created a wireless connection for audio. Is that right?
Thanks for any advice. -
Goods Receipt with auto bin placement and auto confirm?
Hi All
I have a need to putaway and confirm a goods receipt for stock items into 1 bin.
Therefore, at GR (MIGO) the goods are receipted and places into 1 bin and confirmed as putaway.
Is there some config I need to set up or a separate transaction to use.
Thanks in advance
DarrenHi Darren
Is the single bin always the same based upon the material or the movement?
If it is material you can implement a fixed bin putaway, or if it is movement you can do the same
Both use config and master data
Steve -
For some unknown reason I am able to airplay photos and video content that i have recorded using my iphone 5 but i am unable to airplay any music whats so ever??
there is not connection problems and as far as i cant tell all the settings are good?? (or photos wouldnt airplay?, right??)
This is driving me insane, a friend of mine has an iphone 4s and is able to stream music but my far superior iphone 5 cant!!!!! this isnt right surely???How to use iTransfer
1. Launch iTransfer on both devices
2. Tap "Tap to Connect" on both devices
3. Select the device to pair and wait for device to connect
4. Tap "Accept" on the other device
5. Select Photos, Music or Files to transfer
6. Tap "Received File"
7. Select the received file and decide what action you'll like to take e.g. View, Email, Open In -
I constantly am asked to change my password and apple ID every time that I open up a different application. In fact the old ID keeps popping up as my ID. Any suggestions how I can get this fixed once and for all?
Please post the complete, verbatim text of the message, or a screenshot.
Maybe you are looking for
-
Hi Friends! I´m learning ADF with JDeveloper 11g release 1 and i have some problem with the DBSequence! I have done a simple sample to test de ADF operations! I used Fusion MiddleWare template to my application and i have used ADF Business Components
-
Is there any table in SAP that stores the Terms discount for any invoice prior to doing the incoming payment? We are writing a small program that will take a source file and post incoming payments automatically but wonder if the terms discount is alr
-
I have a WiSM configured with the same mobility group name and all pre-reqs are ok but the roaming does not works and the client lost connection when change of access-point. I saw that RF-group are diferents and bootloader version is diferent too. Do
-
I was wondering how to disable fsck from running after the drive has been mounted a certain number of times. I really don't want it doing the check.
-
Image not displaying in Slideshow Javascript
Hello there, I am using the Ultimate Fade-In Slideshow from Dynamic Drive. It's working well apart from the fact that one of my images is not displaying at all. It's the image called "laurentbio1.jpg". Can anyone tell me what I'm doing wrong? I've at