Inventory management and physical inventory data transfer

hi all,
can anyone plz povide me with inventory management and physical inventory data transfer tutorial or link.
points are guarented.
rgds

The information behind the blue-button for MI34, MI38 (as you mentioned) does not have enough detail. It's basically one-page. Is there another instructional source available? How is the logical file MMIM_PHYSICAL_INVENTORY_DOCUMENTS tied to the physical, can you clarify? Not sure how to determine where the sequential file being processed needs to be located. Thanks!

Similar Messages

Incident management and Critical Master data table change management.

Dears,
I need to configure Incident management and Critical Master data table change management on our solman 7.0 server.
I want to know how many days should be required for this activity and please share documents.
Shivam

Hi,
I faced a similar situation,
I tried all the possible ways like activating InfoObject manually, Through an activation program of aggregates,
Also ran RSRV check which was showing no negative results.
I raised an OSS note for the same but after that when SAP returned back the process chian ran again as it is a daily load which activated the record in 'M'.
I ask you to wait till the next process chian run, and try all possible ways to activate.
If it is not corrected then raise an oss to SAP.
Thanks & Regards,
Vishnu

[Solved]Computer slow down and freeze during data transfer syncing

Hello,
Everytime I make a data transfer, my computer slow down, and sometimes freeze during a few seconds, work for a fraction of seconds and freeze again. I don"t understand why.
As an example, here is a bench of files i transfered during a syncing with Grsync
It took about 12h to sync 64Gb.
I've read a lot of topics talking about this problem but nothing works. I tried to switch off the SWAP and setting the vm.dirty_ratio and vm.background_dirty_ratio but nothing works.
I'm making the trasfer between two Western Digital USB 2.0 external hard drive in NTFS.
Does anyone know how to fix this?
Thanks in advance
Last edited by Neldar (2015-03-04 15:54:29)

It seems it was beacause one of my external hard drive was about to die. I performed the same operation with 2 Western Digital external hard drive 1To USB3 and it works perfectly.

Media manager and EXIF rotation data

My parents have FiOS and I recently helped them setup the Media Manager software so that they can view their pictures on the TV. It works great, except for images that have been taken with the camera rotated. Most other applications (Picasa, Canon ZoomBrowser, etc) are able to read the EXIF and rotate the image accordingly. What is Verizon's timeframe for implementing this fairly basic feature into Media Manager? If it is there, I apologize, and please let me know where it is - I was unable to find it.

When you say rotate the photos using media manager, I assume you mean the PC component? I suppose I could do that, but that's really annoying (like you said). Also, the problem is that then I believe that wouldn't they show up rotated wrongly in all of the other software (zoombrowser, picasa, etc) that does support the exif data for 'this side up' ?
When you say you don't use it anymore, have you found another solution that can export photos to the Home Media DVR? That's what my parents really want - the actual PC software, they'd prefer to use Picasa etc as that's what they're already used to.

Record count is different for Full load and Init with data transfer

Hi all,
We have a data source for which delta is enabled on Calendar Day.
If I run the full load record count is 2670.But If I run the delta record count is 2665.5 records are missing.
Would you please help on this.Why those records are missing.

Hi,
Actually for Full Load say you have 50 records. When you run it will upload 50 records.
Now if you run delta if there is no records changes it wouldnt update because there is no update in the existing records.
only delta is done when there is changes in the records.

Difference in data transfer rates between winXP and Linux server?

Hello all,
I am using a winXP laptop to act as my server (all usb external hard drives are connected to it) but the data transfer rates can be really slow. Is Linux faster in that regard? Can a Linux based server provide faster data transfer rates?
Thanks for any help.
Bmora96

Linux cannot make hardware go any faster - so if WinXP and its drivers are making optimal use of those USB drives and the USB data transfer pipe, Linux will not make it faster. (but installing Linux and going Tux are always excellent ideas that need no real reason either ;-) )
Real question you should be asking is if using a notebook in a server role is wise thing to do?

Brief about Console, data manager and Import manager

Hi,
Iam new to MDM we just started installing our MDM components and iam a MM functional guy Can you any one tell me about console, data manager and import manger i need to know the following,
1. what is it
2. How the 3 is interlinked
3. can the data manager be loaded directly without a import
4. is there a std way of creating repository
5. I need to do samples on vendor, customer harmonisation and the spend analysis and matl master harmonisation..
Iam asking too much in this forum but i knw you guys are there to help me out.
Thanks in advance,
Suresh

MDM Console
The MDM Console allows the system manager to administer and monitor the MDM Server, and to create, maintain the structure of, and control access to the MDM repositories themselves. Records are not entered or managed with the MDM Console, but rather with client apps such as the MDM Client.
MDM Client(data manager)
The MDM Client is the primary client of the MDM Server, and is the program most users see on their PCs. It allows users to store, manage and update master data consisting of text, images, and other rich content, and to create taxonomies, families, and relationships. Other clients include the Import Manager, the Image Manager, and the Syndicator.
Import Manager
Allows you to import master data from most types of flat or relational electronic
source files (e.g. Excel, delimited text, SQL, XML, and any ODBC-compliant source),
and to restructure, cleanse, and normalize master data as part of the import process.
<i>2. How the 3 is interlinked</i>
--->
Suppose you are sending vendor information to MDM repository be sending IDOC from R/3. Then the whole process can go as... IDOC will be sent to XI, so XI will generate XML file that contains data. Then import manager can import this file and will so place the data in repository.
Now if you want to send data in MDM repository, the process goes reverse way. Syndicator will generate flat/xml file. This file will be given to XI so that XI will generate IDOC out of it and will send it to XI. This whole process ensures data consistancy
For details refer this link
http://help.sap.com/saphelp_mdm550/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm

EDT and BDT data transfer tool...

Hi,
I am working in insurance module of SAP. There is a business object called Business Partner which we need to migrate from legacy to R/3.
Now for migration of Business partner generally LSMW is not used. People here use EDT (External data transfer) and BDT (Business data toolset)
Does some one know about EDT and BDT as data transfer tools ?
Regards,
Rajesh.

Hi Rich,
I will make sure that I don't duplicate the post.
Thanks.

Not able to connect N82 to pc in data transfer mod...

I am not able to connect N82 in data transfer mode( other modes are working fine) though i installed latest connectivity cable driver for N82. It says that it could not find any suitable driver(after search cd provided and online).
My current firmware version of N82(RM-313) is 10.0.046. Operating system is Windows Vista. Will the firmware update fix the problem or I have to contact customer care center?
Thank you for your support.
mlhpr
Solved!
Go to Solution.

22-Mar-2008 02:51 PM
scoobyman wrote:
Hi mlhpr
If phone is set to 'data transfer" mode on user interface and USB plugged into PC N82 behaves as a Windows USB mass storage device and you are saying that Windows Vista can't recognize this?
Ya thats is what the problem is. As you said the phone was to behave like USB pendrive in data transfer mode but i am getting this error.
:I first connected the N82 with cable Nokia CA-101 provided with handset and selected the data transfer mode. Then the windows(Vista) icon would appear in task bar showing windows is installing the driver. Then a window pops up saying driver not found and requests permission to search online for driver. When I choose search online for suitable driver, it searches for a while and says no driver found. (net is working prefectly fine). The icon disappears from the bar and phone is inaccessible from windows explorer. But USB indicator on mobile screen is active until i disconnect using mobile connectivity settings.
Actually i wanted this mode for installing the Nokia Maps which requires the phone to be in data transfer mode.
mlhpr

Journal entries in Data Transfer workbench

Hi all
When I try to Upload journal entries with debits and credits using data transfer workbench I get an error says Unbalanced transaction.
I tried lot of things to change but still no go.
can someone guide me with this data migration
thanks
vinodh kumar

paste it in note pad and save this sample and open with excel
RecordKey     LineNum     AccountCode     AdditionalReference     BaseSum     ContraAccount     CostingCode     Credit     Debit     DueDate     FCCredit     FCCurrency     FCDebit     GrossValue     LineMemo     ProfitCode     ProjectCode     Reference1     Reference2     ReferenceDate1     ReferenceDate2     ShortName     SystemBaseAmount     SystemVatAmount     TaxDate     TaxGroup     VatAmount     VatDate     VatLine
RecordKey     LineNum     AccountCode     AdditionalReference     BaseSum     ContraAccount     CostingCode     Credit     Debit     DueDate     FCCredit     FCCurrency     FCDebit     GrossValue     LineMemo     ProfitCode     ProjectCode     Reference1     Reference2     ReferenceDate1     ReferenceDate2     ShortName     SystemBaseAmount     SystemVatAmount     TaxDate     TaxGroup     VatAmount     VatDate     VatLine
1     1     110001                              28059     30.01.2009                                        abc pte ltd     abc pte ltd     31.01.2009          110001               30.01.2009
2     2     110002                              50000     23.01.2009                                        abc pte ltd     abc pte ltd     31.01.2009          110002               23.01.2009
3     3     261001                         28059          23.01.2009                                        abc pte ltd     abc pte ltd     31.01.2009          261001               23.01.2009
4     4     261001                         50000          22.01.2009                                        abc pte ltd     abc pte ltd     31.01.2009          261001               22.01.2009
Edited by: Vinod Kumar on Jul 28, 2009 6:56 AM

Data Transfer Port ranges in FTPS with SSL in File Adapter

Hi,
I would appreciate if you could give me pointers reagrding the below issue.
We are on XI 3.0.
For one interface, I have to configure the FTP File adapter to pick up the files from external server.
The connection is secure and should be FTPS with SSL.
I have the certificate from the 3rd party and have it installed on our XI development server.
The change has been made in our firewall to allow the connection to the host IP and port 21 which is configured at the target party as Explicit FTPS port and they have allowed access to our Server IP in their firewall.
I have configured other FTPS connections and they worked fine but this is the only one that has been giving me so much trouble.
The error i get today is:
Error occurred while connecting to the FTP server "60.234.48.106:21": java.net.SocketException: Connection reset
Yesterday, i got the below error:
Error occurred while connecting to the FTP server "60.234.48.106:21": iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier
The Vendor has suggested to get the firewall ports 21 and 28000:30000 (data transfer) to be opened.
He has also provided with the certificate passphrase additionally to the user name and password needed to make the connection.
When i tried the connection from the XI development to the vendor server, via the Telnet, it looked like it worked.
Please advice.
Regards,
Archana

>
Archana Singhai wrote:
> Hi,
> I would appreciate if you could give me pointers reagrding the below issue.
> We are on XI 3.0.
> For one interface, I have to configure the FTP File adapter to pick up the files from external server.
> The connection is secure and should be FTPS with SSL.
> I have the certificate from the 3rd party and have it installed on our XI development server.
> The change has been made in our firewall to allow the connection to the host IP and port 21 which is configured at the target party as Explicit FTPS port and they have allowed access to our Server IP in their firewall.
> I have configured other FTPS connections and they worked fine but this is the only one that has been giving me so much trouble.
> The error i get today is:
> Error occurred while connecting to the FTP server "60.234.48.106:21": java.net.SocketException: Connection reset
> Yesterday, i got the below error:
> Error occurred while connecting to the FTP server "60.234.48.106:21": iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier
> The Vendor has suggested to get the firewall ports 21 and 28000:30000 (data transfer) to be opened.
> He has also provided with the certificate passphrase additionally to the user name and password needed to make the connection.
> When i tried the connection from the XI development to the vendor server, via the Telnet, it looked like it worked.
> Please advice.
> Regards,
> Archana
1. Open the port ranges. FTPS usually requires you to open ports in the range of 65024 through 65535 for Passive FTP data
connections
2. Use the CA name in the certificate. it should be same as of the host name of the FTPS server

Data transfer when modem disconnected?

We have a 5GB per month plan and never went over it until Dec. Figured it was heavy vacation usage, then was obviously going to go over in January. Started tracking usage and found that when all the computers were shutdown, data was still being transferred, sometimes at high rates, usually (if the time recorded is true) late at night and early in the morning. We did an experiment where we completely disconnected the modem at about 10 pm and saw a data transfer in excess of 150 MB from 5 pm to 5 am with no updates or usage that would account for 150 MB from 5 pm to 10 pm. At no time when we had the modem disconnected did data transfer stop. We are in a rural area and our router requires a PW so it's unlikely someone is "stealing" usage. I put this query into VZ via the website a week ago and haven't heard a thing back.

Hello – not sure what will come of this. So far, I’ve contacted Verizon via the website (1.5 weeks ago), no reply. Talked to one person on the 800 number who said she would research and call me back, no reply. Talked to another person on the 800 number who said she would have someone research it and would text me the ticket number, no reply. Getting a little jaded at this point.
Yes I am getting charged for overage. Here is a snapshot of the most recent records:
The modem was disconnected on 2/8/2012 and 2/9/2012 probably about 10 or 11 pm. It was probably reconnected the following morning at 5:30 or 6 am. If my understanding of the records is correct, overnight on 2/8/2012 from approx 6 pm to 6 am 103 Mb was transferred. It is important to understand that for us this is A LOT of data. Our speed is very low and if we have data transfers this large we go into town; we do not use the Verizon mobile. It takes too long.
Around 1/24/2012, very large transfers occurred:
I don’t know if the modem was disconnected from 3 am to 9 am but I do know that for much of that time the computers would have been idle. Again, we would not even have attempted a > 1 G transfer/download.
In the billing period ending Nov 15 we showed 4.7 GB
In the billing period ending Dec 15 we showed 4.4 GB
In the billing period ending Jan 15 we showed 5.2 GB and were charged
As of today (5 days before end of billing period) we show 5.9 GB; we started watching our usage record about 2 weeks ago
I can’t go further back in the records past Nov 15 but I think data usage before that was closer to 3 GB.
As I mentioned in my post we are in a rural area…the nearest neighbor with a computer is almost ½ mile away. I doubt that our router reaches that far and it is PW protected.
If you can help, I would appreciate it. Getting a bit frustrated. If we had high speed with this kind of overage it would not be bad. But our very slow speed (excepting a few heavenly days with 4G; don’t know why it happened but enjoyed it) means we’re paying more for not very good service. I’m running now at 500 kbps, which is actually not that bad compared to summer speeds.
Ann

Generating Offer Letter & Data Transfer in Recruitment Module

Dear Gurus,
1) We are implementing Recruitment module and i am quite new to it. Could any one of you suggest what are the sequence of steps required to maintain to make sure that a Standard offer letter is generated and how to mail it to the applicant while you perform Offer Applicant Contract activity. Kindly suggest how to move further to fulfill this requirement.
Kindly note this is pure Recruitment module and e recruitment is totally out of scope.
2) How do you transfer applicant data to Personnel Adminstration module when the Applicant action Prepare for Hiring is run.
Kindly suggest the sequence of steps to be followed to make sure the data transfer happens from recruitment to personnel adminstration.
Kindly also let me know what are the mandatory switches that have to be activiated in T77S0 table to set up an integration between PA & RC.
3)When you hire a external applicant whose data is already there in PB10 and when you hire him for suitable vacancy and do the data transfer to PA. The next time when i try searching in the applicant pool will the Applicant group change from External applicant to internal applicant in case of hired applicant. If yes how to go about it.
Kindly throw some light on this. Please note we would like to go about the standard functionalities of SAP Recruitment module.
If there is any challenge in fulfilling the above requirements, kindly point out the same so i can address the same to my client...
Regards,
Kiran

Hi Ravi,
You can do the initial data entry of the applicant through Tcode PB40 or PB10. Once you have maintained the data, then you can do the applicant actions like given below through Tcode PB40.
Enter additional data
Reject applicant
Put applicant on hold
Process applicant
Offer applicant contract
Applicant rejects offer
Change of org. assignment
Further application
Invite applicant.
It is not compulsory to do all these actions, but these actions are useful to keep a track of applicants.
Then you have to do applicant action prepare for hiring through PB40. After doing prepare for hiring action you can transfer the applicant data to Personnel administration through Tcode PBA7. Once the data is transferred personnel number is generated for applicant. Then you have to complete the activities throug Tcode PBA8.
Few tables for configuration of recruitment :
T750D - for creating media for recruitment
V_T750C - Recruitment instruments
T750K - Applicant group
V_T750F - Applicant range
V_T751E - Applicant action type
V_T588D - Infogroup for Applicant action
Shrikant

DTPs - Delta Init without Data transfer.

Hi All,
I am implementing the DTPs in my project where we replicate the old 3.x extractions with the bw7x functioanlity;
Can anyone tell me if their is way to implement the "Delta Init without Data transfer" scenario with DTPs for
both R/3 to BW(ODS) extraction or for the Datamarts - ODS to Cube within BW??
Thanks in advance!
Cheers
Rao

Hi Rao,
Yes u can achieve Initialization without data in BI 7 DTPs.
Goto ur DTp's Execute Tab, and Processing mode there drop down the list and select No Data Transfer,Delta Status in Source: Fetched.
Assign points if helpful.

Differ between import manager and import server

Hi to all,
Can any one explain difference between import server and import manager and how the data will be imported to the same.
Regards
MM

Hi reddy,
Can any one explain difference between import server and import manager and how the data will be imported to the same
Please follow the text below, which has been taken from the help.sap.com
Both MDIS and the MDM Import Manager can import data from a source file into an MDM repository. However, each has unique capabilities that distinguish it from the other. When each is used to its advantage, the result is an import strategy which provides the most efficient importing of data possible.
The strength of the Import Manager is its connection to the source data, which enables its interactive map-making capabilities. When the Import Manager connects to a source it preloads the entire source file, giving it knowledge of every field and every value in the source data. This u201Ctotal awarenessu201D is crucial for preparing a complete import map. To help ensure a map is complete, the Import Manageru2019s Import Status tab alerts users to any discrepancies between source data values and the current map. The user can fix these problems interactively within the Import Manager and save the corrected map before any data is imported.
Preloading an entire source file comes at a price, however. It consumes memory on the computer running the Import Manager and very large source files may exhaust the computeru2019s available memory.
By contrast, MDISu2019s strengths are its scalability and automation.
For scalability, instead of preloading the entire source file into the host machineu2019s memory as the Import Manager does, MDIS processes records in a stream by loading a record at a time into memory.
This streaming technique enables MDIS to process much larger source files than the Import Manager, as the demand for memory on the host machine is not affected by the size of the import file.
In addition to file size, file quantity poses a second scalability challenge. For example, a real-time transactional environment may produce a staggering number of files, each containing only one or two records. To import these files individually through Import Manager would be extremely inefficient. MDIS tackles this problem with a file aggregation feature that processes files systematically in batches rather than as individual files, resulting in faster, more efficient import of data.
As it relates to automation, MDIS requires no user intervention to import files to an MDM repository. Instead, it relies on maps created previously within the Import Manager. Once an import file is placed in the appropriate folder, its data is imported automatically into the MDM repository using the rules of the pre-defined import map. Once a file is processed, MDIS scans the repository for the next file to import. This process continues 24 hours a day, seven days a week, until either MDIS or MDM Server are stopped.
The trade-off for this scalability and automation is that if discrepancies between the source data and the import map arise, MDIS cannot u201Cfixu201D these problems by itself. Instead, the u201Cproblem casesu201D can be fixed manually at a later time using the interactive capabilities of the Import Manager. Unlike the Import Manager, however, MDIS can set aside problem records or files and continue importing.
These conceptual and operational differences between the Import Manager and MDIS are summarized in the table below.
Item
Import Manager
MDIS
Source file location
Anywhere
Automatic inbound port
Import process
Interactive
Automatic
Import map state
Editable
Read-only
Object loaded in memory
Entire import file
Individual records
Streaming import support
No
Yes
File aggregation support
No
Yes
Maximum import file size
Limited (50,000 records)
Unlimited
Status location
Import Status Tab
MDM Console/Report file
Error correction prior to import
Yes
No
Exception handling during import
No
Yes
For additional info, kindly refer the link below:
http://help.sap.com/saphelp_mdm550/helpdata/en/43/12036df94c3e92e10000000a1553f6/frameset.htm
GO to-> MDM import Server
Hope it helps.
Thanks and Regards
Nitin Jain

Inventory management and physical inventory data transfer

Similar Messages

Maybe you are looking for