Inventory Management - BADI

Good day,
Currently the Inventory Management extractors(2LIS_03_BF, 2LIS_03_BX, 2LIS_03_UM) only extracts Local Currency. We would like to extract the values in Group Currency as well. Doing currency translations is not an option for several business reasons. We have to have the Group currency as it appears in the Material Ledger. I debugged the standard extractor for Inventory management and noticed that the extractor caters for a BAdI(Business Add In). Can anyone please give me an indication where I can look for this BAdI. I looked on SPRO on R/3 and there is a list of BAdI's under BW, but I don't know which one to use and how to use it. I would appreciate help in this regard.
Thank you.
Regards.
Verushca Hunter

Hi dear and welcome on board !
I think you have to fill your additional field in the usual exit provided for customer enhancement (RSAP0001) in CMOD transaction, EXIT_SAPLRSAP_001 in the include ZXRSAU01...
Otherwise you can go fot the new RSU5_SAPI_BADI...
Hope it helps!
Bye,
ROberto
...and please don't forget to reward the answers...it's THE way to say thanks here !

Similar Messages

Inventory management: Validy dates in queries???

Hi experts,
We have BW 7.0.
I have loaded data on 04.03.2010 with BF- and UM-datasources and compressed it correctly.
When I now look into the validy table for plant 0001 there is a validy range from 03.07.1997 to 08.02.2010.
But when I start a query for 09.02.2010 system says "no data found".
The document "How To Handle Inventory Management Scenarios in BW" says that I should show the result in parenthesis!
What is up here?
But I don't want to update this validy table!!!
Pls help!
KR,
Raimund
Text in document:
...For example, if data with document data was loaded into the
InfoCube with values from 01.01.2002 to 15.02.2002 (assigned to the respective time
characteristic), the validity interval is also determined by these two date values. You can
extend the intervals by maintaining the table (transaction RSDV). Stock balances are
displayed for requests that relate to this period. If you start a query that requests the
stock balance for 16.02.2002 or later, the result is displayed in parenthesis (a blank
value is displayed in BW 2.0B and 2.1C), since it lies outside the validity area (providing
that the validity table was not manually extended using transaction RSDV)....

Hi,
Hi,
Use 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM to 0IC_C03 Cube and design the report.
Use :
0VALSTCKVAL   " for Value
0VALSTCKQTY   " for Qty
0CALMONTH        " for Month
Use the above combinations in New Selections in columns and go it.
For Qty Opening:
New Selection bad drag abd drop following things
0VALSTCKQTY   " for Qty
0CALMONTH        " for Month and restrict with less then or equalto option variable (single value, user input) and set the offeset
                               value = -1 bcoz if user will give 12.2009 , so it will display 11.2009 closing stock, this is opening for 12.2009.
For Qty Closing:
New Selection bad drag abd drop following things
0VALSTCKQTY   " for Qty
0CALMONTH        " for Month and restrict with less then or equalto option variable (single value, user input) .
In the same way build for Value and other Keyfigures on 0IC_C03.
And
Drag & drop
0MATERAIL
0PLANT " Give some Input Variable.
See the steps.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
See this thread related to Inventory.
Re: Inventory Mangement steps - questions
Thanks
Reddy
Thanks
Reddy

Problems reloading Inventory Management

We have been struggling to reload our Material Movements cube (0IC_C03). We have been following the SAP documentation titled 'How to handle inventory management scenarios in BW'.
Our initial loads (Stock Opening Balance, Movements Init, Revaluations Init) have all been successful and validation looks good. The problem is that when the first delta UPDATE runs we end up having many negative inventory quantities appearing. We are not sure what we could be doing wrong.
Compression settings are as follows
1) Run stock opening balance (2LIS_03_BX)
2) Run statistical setup for 4/3 only for Revaluations and Movements (2LIS_03_BF, 2LIS_03_UM)
(Compress with Marker option NOT CHECKED)
3) Load Stock infoPackage 2LIS_03_BX with 'Opening stock balance checked ' (ie: not full update)
(Compress with marker option NOT CHECKED)
4) Run delta init for Movements
(Compress delta init with marker option CHECKED)
5) Run delta init for Revaluations
(Compress delta init with marker option CHECKED)
6) Setup job control in logistics cockpit
7) Run delta update for Movements
Compress delta with marker option NOT CHECKED
8) Run delta update for Revaluations
Compress delta with marker option NOT CHECKED
The issue seems to occur with steps 7 and 8. The initial time we do these steps we get zero records and everything looks good. Then the next day the same steps occur in our nightly process chain and then the data is bad with negative values.
Any ideas what we could be doing wrong?
Thanks!

Hello Patrick,
Whic values you are getting as negative, the non-cumulative key figures or the inflow and outflow key figures? If the inflow and outflow KFs are coming correctly, then problem is in BW side e.g. compression sequence. But in case inflow and outflow KFs itself are coming worngly with negative sign from R/3, then problem lies in R/3 side. In that case you can check the corrsponding data in tables MSEG and BSEG. Let me know in which part the problem lies and from there we can take it forward.
Regards,
Praveen

Combined Report for Purchasing and Inventory Management.

Hi All,
Is there any standard SAP Report available where I can get all the information related to Purchasing and Inventory Management in one.
Like Material,Purchasing details of the material (vendor, price etc ) and Inventory Management (Stock qty and value etc.).
Regards,
kumar

I don't know any. We have one Z or if you want you can make a simple query.
Best regards.

Inventory management for Equipment

Hello Experts,
One of our client is currently using SAP-ERP system. They are having sensitive equipment for their safety purpose to all the gate securities. Now they are using Third party tool for their application. The current system is not reliable for tracking the material flow, equipment tracking, and online inspection for the equipment. Currently they are having 40posts (Gates).Different type of equipment is located in all the posts based on its range.
Equipment issue, Retrieve equipment,conumption posting,scrap accounting also maintain in MM
So they want to automate this process in SAP system which includes all the Employee details (Security),Medical Fitnessu2026u2026u2026for ease tracking of the equipment ,status of the equipment, employee equipment training, online-inspection and security shift change details.
How to map this scenario in MM?Awaiting for your valuable reply.
Regards,
Rajkumar.A

Hello,
Currently they are havingSAP-HR.But i want to integrate HR with inventory management(Like issue,receipt,scrap,consumption)

Inventory Management for Airlines Industry

Does Oracle offir a solution that allows an airlines to manage its inventory? I have a customer who has heard and read that Oracle's Inventory Management module will work with the special requirements of the airline industry. Is this true?

Hello,
Currently they are havingSAP-HR.But i want to integrate HR with inventory management(Like issue,receipt,scrap,consumption)

Inventory Management and WBS?

Hi there,
We want to show an inventory management report which contains WBS Hierarchy. It shall look like the following style:
Dimension　　　　　Fact Stock Value
FKSTL
->PROJECT
　->WBS
　　->MATNR　　　　xxx,xxx,xxx
I have activate two InfoCubes, 0IC_C03 and 0PS_C04. What can I do to show the report like that?
Thanks in advance

Hi
Have you uploaded the hierarchy for FKTSL and include this infoobject in your cube......you can execute the report to drilldown based on the hierarchy
Hope this helps
Cheers
N Ganesh

The interface connecting Lean-WM and inventory management

Dear experts!
Thank you for your attention!
I am confused at the interface connecting Lean-WM and inventory management.
there are so many concepts in this field, such storage location, picking areas, storage types and so on.
Could you please give me an real case or a illustration to discribe that how the interface connecting Lean-WM and inventory management works?
Best regard!
Tangdark

you do nto need to enter serial numbers while clearing inventory at WM level but at IM in case you have the serial profile activated then you need to enter serial numbers when clearing inventory from the IM level.
according to what you have said it should automatically pop up a screen where you need o enter the serial numbers but this is weird it is not doing.
Please check the following:-
Does the serial number profile config in OIS2 have "MMSL" as a property and if so is entry of serial numbers mandatory during goods receipt and issue ad if there is a stock check active

Will MIM (Merchandize and inventory management) work with SAP AFS / SAP POS

We are implementing SAP AFS ERP at the head office and SAP POS at the retail stores.
We want to implement the MIM module for inventory management at retail store level. Does MIM work in conjunction with SAP AFS. A consultant was suggesting that MIM works only with SAP Retail and no other vertical SAP solution.
Can someone please clarify?
Regards
paddy

MIM is linked to IS Retail, not to AFS.
Nevertheless, you can always link and AFS and a Retail system. SAP provides a very convincing ALE scheme for this.
Eric

Analysis Process Designer and Inventory Management

In the How to guide for Inventory Management it mentions that you can you can intialise stock in the Snap shot Cube using the Analysis Process Designer (APD). Has anyone done this and if so can you explain how or outline some steps? Thanks

Hallo,
the APD does`nt be a useful tool for modeling a performant
data flow. A lot of SAP BW user think so.
The performance problems are given by the ddic intern table, using to uploading the extracted data into the apd used wa_table and structures.
To have the best performance on your scenario, please use the following scenario as possible.
Step 1.
upload the extracted data from the psa into a data layer
there you can reduce and harmonize the data by using a transactional ods
Step 2.
build a infoset that joins the data
Step 3.
build one query to reducing data and make two copies of ist
Step 4.
build a useful data mining model
Step 5.
upload the results of the data mining model into a transactional ods
Step 6.
link the uploaded data into a infoset ore write back into a standard ods
Step 7.
query the data
If you use this scenario you have a lot of benefits. Better performance, better quality of persistent data and actual and traininged data.
The recommend next step (if you want a alerting) is to build a reporting agent report - if you have usefull processes in the query.
There are a workshop for Data mining and APD, named BW380.
I hope I helped you.
Otherwise give me a message.
[email protected]

POS and inventory management suggestions?

I own and operate a gift shop and wanted to use my iPad, iPhone, and MacBook Pro to ease the burden of inventory management. Any suggestions for a POS system that would help manage what comes in and out of the shop?

Check out NCR Silver. App based POS with back office that tracks inventory levels in real-time. Have visibility to quantity on hand, know how many days of supply are remaining based on past sales history.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
<Edited by Host>

Deployed BP for retail store and inventory management

Hi,
I have installed BP for retail which gives me the pages of store and inventory management but the iViews are not opening even after assignig the roles to the users. I have created the system alias SAP_ECC_RETAIL but still no luck.
Please help.
Thanks.

Hi,
Please check the following:
1. Ensure the BP for Common Parts is installed on the portal. This package is a prerequisite for the retail BP that u mentioned.
2. Make sure the system object that u created for the backend have passed the connection tests.
3. If this does not solve the issue, please check out the defaultTrace and application.log files under the following directory:
/usr/sap/SID/JC<NN>/j2ee/cluster/server0/log
Check the latest files here and post the error mssgs from there to this forum.
Regards,
Shitij

Q&A db for warehouse management and inventory management

Hello Everybody,
i read on the help.sap website that standard as well as industry specific versions of Q&A db are available. but the website doesnt say where. i searched a lot but the links dont lead to the actual Q&A db.
i would like to request you to kindly share the Q&A db for inventory management and warehouse management with me as i need it for preparing the AS IS documentation.(preferably automotive industry but if not then even standard Q&A db is fine).
thanks a lot.
sapman.

Now QADB will not help to map the clinets requirement. Instead of QADB get AS IS information form Coreusers... thats best practice now....
Go through www.sap-img.com for further details...
Edited by: Ganti on Jul 26, 2008 7:26 AM

Stock Valuation - Inventory Management Cube

Dear Sap Gurus,
We have implemented the Inventory Management Cube in BW.
Quantities are correct, but we have difference on the stock valuation.
For some material stock value are correct, for some other they are not correct.
A saw a lot of OSS notes and how to on this subject, I am trying to solve this issue using these documents, but based on your experience could you explain me how you solved this issue ????
Thanks,

Hi
Did you follow the correct steps?
Initialisation of BX data in the first step.(Loading of Opening Stock)
Then The request in which the opening stock was loaded must always be
compressed with a marker update
Init load of BF And UM in the second step
The request in which the historical material documents were contained
must always be compressed without a marker update and
Successive delta uploads must always be compressed with marker
updates
Check this whether you have done this or not.
Because of missing the steps here also would give you wrong values,
Regards
Ram

Interview questions on SAP MM Inventory Management?

Hi all !
I am preparing for interview, so can anybody please give me the interview questions for SAP MM inventory management ?
Thanks in advance !!

Hi,
Follow the links:
http://www.sap-img.com/materials/sap-material-management-interview-questions.htm
http://www.sap-basis-abap.com/sapmm.htm
http://www.simplysap.com/forums/threadflat.htm?tid=32
http://209.85.28.27/ccforums/PrintPost.aspx?PostID=44
Regards,
Biju K

Inventory Management - BADI

Similar Messages

Maybe you are looking for