Inventory Management Cube 0ic_c03, 0StockType

In the Inventory Management Cube 0ic_c03 queries,I've found that  0StockType has descriptions that are misleading because of the way they are written in domain bstaus (R3 side), especially when seeing the key and SHORT description (truncated beyond meaning).
OK I can correct these by changing BStaus 's texts.
The main changes I'd do are for the Customer Consigment, Customer Return Packaging and Material Provided to Vendor descriptions.
But what does 0StockType 'blank' (or #) mean ?
(It seems to mean something like Valuated Stock Valuation and 'Not Defined' is not very good in a Query result)

Well, no one replied, but I got feedback from OSS.  So just in case anyone is interested.....
I had to use r3 > se11 to change the domain descriptions myself.
Bstaus 'blank' I put as 'Valuation'
I also improved some of the Bsttyp descriptions whilst there

Similar Messages

  • Missing content for inventory management (cube 0IC_C03)

    Hi everybody,
    I installed the following BI content for inventory management: Cube 0IC_C03, InfoSource 2LIS_03_BX and transfer rules from data source 2LIS_03_BX to info source 2LIS_03_BX. However, I'm not able to the update rule from info source 2LIS_03_BX to info cube 0IC_C03. I can only find the old update rule 0IC_C032LIS_40_S278 -> 0IC_C03.
    I also couldn't find the update rule for material movements from 2LIS_03_BF to infocube 0IC_C03.
    How can I find this missing content. We are using BI Content Release 704 Level 1.
    Thanks for your help!
    Thomas

    Hi Oscar,
    unfortunately, I was not able to find a transformation for the datasource migrated to 7.0.
    Btw, how do I determine to which version data sources are replicated. I have an underlying ECC6.0 system. When I replicate all data sources for that source system, datasources automatically show up as 7.0. I'm missing the pop-up question whether or not I want to replicate as 3.5 or 7.0.
    Thanks in advance!
    Thomas

  • Queires on Non-Cumulative Inventory Management Cube 0IC_C03 Not Working

    Hello all.
    I am trying to use the 0IC_C03 Inventory Management cube with non-cumulative key figures.  I followed the How to...Handle Inventory Management Scenarios in BW paper to a tee.
    Steps I followed:
    1.  Ran initialization of beginning balance with 2LIS_03_BX
    2.  Ran the historical job with 2LIS_03_BF
    3.  Uploaded to BW the Initialization (BX) and compressed without setting the "No Marker Update" flag
    4.  Uploaded the historical movements (BF) and compressed setting the "No Marker Update" flag
    Now, to this point, everything was fine.  Quantities were as expected.  Dollar values were as expected.  The problem occurs once I load deltas:
    5.  Loaded delta for 2LIS_03_BF and compressed without setting the "No Marker Update" flag as instructed in the How To... paper
    Query example:
    MATERIALA: 
    Initial Stock Balance = 1000 EA
    Delta had stock issue of 150 EA (so the stock balance should have decreased from 1000 to 850)
    Now, I have the record in BW showing the stock issue of 150.  However, the non-cumulative key figure within the query still shows 1000.  And when I drill down by calendar day, I would expect the result to show 850, but it seems to add the 150 before taking it away resulting in 1000 which is actually the initial stock balance.  It is like it is not recognizing the updates.
    Any help would be appreciated.
    Thanks,
    Brent

    Hi!
    Here is what helped in my case, very similar to your:
    In DTP for 2lis_03_bx (not only in infopackage, as it is said in manual!) you have to change "Extraction Mode" parameter to "Initial Non-cumulative for Non-cumulative values"

  • Cubes on the Materials management Cube 0IC_C03

    HI,
    We need to create cubes on the Materials management Cube 0IC_C03 to take care of the huge inventory data we have . These will be a copy of 0IC_C03 and 0IC_C03 will be a staging layer.
    Want to know how will the marker update will work on the new cubes?
    Thanks.
    Nitin

    Hi,
    Look this link wll give u full detailes about marker updats and so on....
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    ***********Asign Points if usefull*******
    Cheers,
    Satya

  • Cubes on Materials management Cube 0IC_C03

    HI,
    We need to create  cubes on the Materials management Cube 0IC_C03 to take care of the huge inventory data we have . These will be a copy of 0IC_C03 and 0IC_C03 will be a staging layer.
    Want to know how will the marker update will work on the new cubes?
    Thanks.
    Nitin

    Hi,
    Dont enter duplicate trds pls close trd if u got solution
    Cheers,
    Satya

  • Stock Valuation - Inventory Management Cube

    Dear Sap Gurus,
    We have implemented the Inventory Management Cube in BW.
    Quantities are correct, but we have difference on the stock valuation.
    For some material stock value are correct, for some other they are not correct.
    A saw a lot of OSS notes and how to on this subject, I am trying to solve this issue using these documents, but based on your experience could you explain me how you solved this issue ????
    Thanks,

    Hi
    Did you follow the correct steps?
    Initialisation of BX data in the first step.(Loading of Opening Stock)
    Then The request in which the opening stock was loaded must always be
    compressed with a marker update
    Init load of BF And UM in the second step
    The request in which the historical material documents were contained
    must always be compressed without a marker update and
    Successive delta uploads must always be compressed with marker
    updates
    Check this whether you have done this or not.
    Because of missing the steps here also would give you wrong values,
    Regards
    Ram

  • Movement Type in Inventory Management Cube

    Hello Guys,
    I am new to the area of Invenotry Management. I have seen the How to Guide and blogs by Surendra for Inventory Management scenarios.
    One of initial doubt is that the cube 0IC_C03 does not have Movement Type. As per the blog, we can define transaction keys in BW but how do I pull it in my Cube. Is ehnacing the extract strcuture BF the only option? If yes, what logic do we follow to add movement type to BF?
    Also as per SAP Note, we cannot enhance BX to include movement type. So would it create a problem if BX does not have a movement type and BF has?
    Looking forward to solutions
    Thanks n Regards,
    Abhishek

    Dear John
    The movement type has important control functions in Inventory Management.
    For example, the movement type plays an important role in
      => updating of quantity fields
      => updating of stock and consumption accounts
      => determining which fields are displayed during entry of a document in the system
    thanks
    G. Lakshmipathi

  • About archiving BW Inventory Management cubes

    Hi everyone!
    I would like to know what a marker in Inventory Management (BW) is. This question comes from the following: I need to archive a IM cube, and it presents the following option:
    Stocks:
    Only transactions
    Transactions and Markers
    I don't know what a marker is, so I'm kinda lost here...
    Any help would be greatly appreciated (and rewarded, ofc!).
    Best Regards,
    Luís.

    Hi,
    Marker is fairly simple, you will get the details also on help.sap.com with more detailed explanation.
    In a brief here is what i can tell you :
    1. The marker is set on a specific date and the value of the inventory KF( NON CUMULATIVE KF) the value on that particular date is stored in the cube.
    2. Since Inventory is working on the non cumulative method the difference is calculated since DAY 1. but with Marker the difference is calculated from the day of marker.
    Hence it helps in retrieving faster results.
    Let me know if you want more information.
    Regards,
    Den

  • Inventory analysis Cube 0IC_C03

    Hi Experts,
    I am unable to work with 0IC_C03 cube in BI 7.0. I didn't find
    standard transformations for this cube.
    Please let me know the data flow for  0IC_C03 cube in BI 7.0.
    Advanced Thanks,
    Chandra

    Please check this out.
    http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
    You can install three Transformations from Business Content corresponding to the following three DataSources:
            2LIS_03_BX
            2LIS_03_BF
            2LIS_03_UM

  • Strorage location is initial in  Inventory movements cube 0IC_C03.

    Hi -
          I  have a requirement  to show total inventory value by Storage locations for selected dates. I have activated business content and loaded data into Infocube as per how to document.... But 0STOCTYP, 0STOR_LOC and 0BATCH are not filling in Infocube. As per SAP they are left initial in transformations and not getting filled during data load. I found a SAP note on it but it is giving solution for single material value in particular storage location.  I went through how to document for this situation in SDN. Can anyone please help me if you have any other solution for this issue. Please don't direct me to sap notes and how to documents. Please let me know if you need any extra information. Thanks in advance.
    Regards
    Anesh B

    HI,
    Map the fields to the R3 Fields as below
    BSTAUS - Stock Type
    CHARG - Batch
    LGORT - Storage location
    These fields has to be mapped to get correct stock in Inventory. Dont leave them as initial in transformation mapping.
    Map them and load it and check the data you will get the issue fixed.
    Thanks,
    Arun

  • How to get average stock in the inventory management cube?

    Dear all,
    I need to get average stock for a month.
    For example: stock on May 1st is 30kg,  stock on May 2nd is 20kg,etc. I need to add these everyday stock together and divided by the days of the month.
    Now I have a non-cumulative key figure with inflow and outflow for stock. Is any way I can do this without bringing very bad performance?
    Regards,
    Bolun

    cOULD YOU PLEASE EXPLAIN ME HOW DID YOU SOLVE YOUR PROBLEM

  • Inventory Management 0IC_C03: Beginning and ending inventory

    Hi Gurus
    My report is based on Inventory Management cube and I have a requirement where in I need to show Begining Inventory and Ending Inventory for Plant per Period.
    There is no KF for Beginning Invin SAP standard model in inventory management cube (0IC_C03 cube), so I thought to restricting total quantity by Fiscal period and Offset by minus one to get begining inventory.
    Here is my report layout:
    I have got : Period , Plant in rows and Beginning and ending inventory in Columns.
    Desired Output:
    Fiscal Period | Plant |  |  Begining Inventory | Ending Inventory.
    03/2009        |  1001 |    100                       |  50
    Actual Report output
    Fiscal Period | Plant |  |  Begining Inventory | Ending Inventory.
    02/2009        |  1001 |                 100          | 
    03/2009        |  1001 |                                |  50
    So basically report is being split on two lines for current and previous (due to restriction in begining period : Offset =-1 on period).
    Question is how to achieve both begining and ending inventory for a period in same line.
    Thanks in avdance for help and time
    SA

    HI Naveen
    Thanks for the reply. Non *** KF are already being used and Standard SAP model is being followed. Problem is not with back end but with frontend. Data coming on the report is fine but problem is how to show them on same line. Remember Beginning inventory for current open is ending inventory for previous month and  in SAP content there is no KF called as begining inventory. Basically data from two consecutive periods (current and previous one) needs to be on same row of report, but they are coming on different rows if we have period in drilldown by period. this makes sense but how to overcome this.
    This, We have all the correct data but facing issue while displaying that on frontend.
    Thanks
    Sorabh
    Edited by: Sorabh on Mar 23, 2009 5:01 PM

  • Snap shot in inventory management

    Is it recommended to use the snap shot scenario in Inventory management cube 0ic_c03?
    If yes can you please tell me the procedure to finish the process or creating it?
    I have already loaded the data in to the cube from the Data sources 2LIS_03_BX AND 2LIS_03_BF.
    thanks,
    Naveen

    Please check this http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328&overridelayout=true

  • Extend Inventory Management (0IC_C03) with new field MSEG-INSMK

    Dear Experts, We are using Business Content InfoCube "Material stocks/movements" (0IC_C03) in Area "Inventory Controlling/Inventory Management" in BW. We are using following Business Content DataSources: Stock Initialization for Inventory Management              2LIS_03_BX Goods Movements From Inventory Management        2LIS_03_BF Revaluations                                                            2LIS_03_UM Everything works fine with delta load till now. Now we have a new requirement so that we have to fill additionally the R/3-Field MSEG-INSMK in existing Inventory Management InfoCube (0IC_C03). The Business Content DataSource (2LIS_03_BX/BF/UM) doesn't provide R/3-Field MSEG-INSMK and I don't find any other Datasource for the R/3-Field MSEG-INSMK ("Document Segment: Material" - Stock Type). How can we extend the InfoCube 0IC_C03 with the R/3-Field MSEG-INSMK? Should I define a new Generic Datasource based on the table MSEG to extract the field INSMK. The table MSEG is very large. What would be Delta-Specific Field for Generic Delta? I would load the data from generic DataSource into a new DSO. And I can read the field MSEG-INSMK per Look-Up from the DSO in the transformation to the InfoCube 0IC_C03. Is this the solution? Many Thanks Moha

    2LIS_03_BX cannot be enhanced. There is an SAP note that says enhancing this Datasource is not supported.
    2LIS_03_BF can be enhanced though, and the process is just like enhancing any other LO Datasource.
    So you can include the new field in the cube, enhance BF and load to the cube. With this, you will be able to report the INSMK field on the goods movements. But as INSMK is not present in BX, you will not be able to report the INSMK field on stock position reports.

  • Inventory Management reporting.

    hi xperts,
      Can anybody explain me How to caluclate the Following?.
    1.Total Warehouse Inventory Value
    2.Warehouse Inventory Turnover
    For a custom made inventory management Cube Based on 0IC_C03.
    Please help me,as it is very urgent.
    thanks in advance.

    Hi,
    Have you tried using constant selection for the value using the value at plant level.
    I'm not sure this will be the solution, but maybe you can try it.
    Hope this helps.
    Regards,
    Diego

Maybe you are looking for

  • Adobe CS6 Design Download Problem

    I have purchased Adobe CS6 Design and Web Premium for Windows.  I was able to download some but not all of the programs.  I receive an Adobe window message to indicate thatPhotoshop, InDesign and Flash Professional could not successful be downloaded.

  • SQL Developer Loading Problem

    Hi Friends, I Successfully Install Oracle 11g in my system. When i enter into SQL Developer the screen was opened but it was asking username and password continuously. So, i couldn't work.Please tell me the solution for this. Can anyone help me ? Tha

  • Get number of cells in F that = "Charge" for which H = "win"

    Hello, (having a hard time working with formulas) I have a table with games (matches), I want to know how many games of a type were won. I tried to use (in French) NB.SI and CONCATENER but I always get syntax error. P.S. how do I know a function in a

  • How does one execute unix commands from within an applet?

    Greetings Folks, I've written a simple java applet that runs a unix command and then displays some information. The applet compiles fine, and runs perfectly from the command line on my unix system. However, when I point a browser at the applet from m

  • WRT54G Problem - Web based setup not displaying

    Anyone else had a problem like this? I've used Mozilla and IE, but I don't actually get anything appearing aside from the basic page layout of the setup page after I log in. It loads and everything - IE says there's an error on page; but i get hardly