Inventory Management (ME) output language can be language dependent?

Hello,
I'm using ME21n + MIGO to post Goods Returning documents - SAP creates Material Documents of type 161. So far I haven't been able do generate a language-dependent output in MIGO:
- When I leave the language field of the condition record empty, the output is always in the local language;
- When I fill this field with any language, SAP will create an output in that language;
What I need is to create an output based on the supplier's communication language (the supplier being of course the one used to create the Goods Returning document in ME21n ).
Any clues?
Regards
Joao

I decided to mark this question as answered, since this requirement is no longer needed.
Regards,
Joã

Similar Messages

  • How to handle inventory management scenario

    Hi All,
    In How to handle inventory management scenario whitepaper, I fail to understand the basic difference between 'Inventory Management with non-cumulative Key Figures' and 'Inventory Management with Snapshots'. Can anyone please explain me the basic difference.
    Thanks
    PB

    Hi Loic
    Can u please see if all the steps listed below are OK.
    While setting up  the IM Scenario
    I have jotted down the steps with valuable inputs from you  and paper 'How to Hanlde IM scenarios'
    Please find the steps below. Kindly review them and let me know in case I have got anything wrong or missed out on anything.
    1. Transfer Business Content Datasources 2LIS_03_BX , 2LIS_03_BF, AND 2LIS_03_UM in RSA5.
    2. Go to Transaction LBWE, Activate Datasources 2LIS_03_BF, AND 2LIS_03_UM.
    3. Go to Transaction MCB_ select SAP BW usage 'Standard' Radio button.
    4. Save it.
    5. Go to Transaction MCNB, enter name of run ‘Stock_init’. Enter Termination date in future. Enter Datasource as 2LIS_03_BX.
    6. Execute the initialisation.
    7. Entries can be found in SETUP Table MC03BFSETUP & MC03BFSETUP.
    8. Run SETUP for 2LIS_03_BF, AND 2LIS_03_UM using TCodes OLI1BW and OLIZBW respectively.
    9. Run the extraction for 2LIS_03_BX in BW.
    10. Compress the request with ‘No Marker Update’ NOT SET i.e. unticked or unchecked.
    11. Run the extraction for 2LIS_03_BF in BW.
    12. Compress the request with ‘No Marker Update’ SET i.e. ticked or checked.
    13. Run the extraction for 2LIS_03_UM in BW.
    14. Compress the request with ‘No Marker Update’ SET i.e. ticked or checked.
    Steps 1 and 2 shall be executed in Development and transported to production and step 3 onward should be carried out in Production itself with Posting Block.
    Thanks in advance.
    Regards
    PB

  • PO sapscript output language

    Hi,
    how to change the output language for sapscript, in transaction ME23N ( purchase order ), using print preview or sending output to spool, please ? The sapscript code differs from language to language, but by default the English version is taken ?
    thanks,
    kind regards,
    Rolf

    Hi,
    You can change the Message output language and can get the particular printout.
    If not you can give print out in debug mode and change the ekko-spars parameter value your required language in call function OPEN_FORM .
    Language value should be 1 char in this.
    Ex: EN -> E, DE-> D.
    Pls try .
    Thanks.
    Rajesh

  • Can i transfer stock with transfer order in Inventory management?

    Can i transfer stock with transfer order in Inventory management between two storage locations in the same plant?

    I hope you are referring a transfer order and the transfer between two storage locations connected to the same warehouse, and just not doing movement at IM level with a transfer order.
    But, if you are referring to making a bin-bin transfer within the warehosue and you want to influence the storage location to storage location automatically, yes, you can do this. You should use 'storage location control' configuration under WM-IM interface to drive this. Essentially, you need to maintain the warehouse, destiantion storage type, plant, destination storage location and movement type 311. When you perform the transfer order confirmation to move inventory from a storage type (inventory is under source storage location) to the destination storage type (per the configuration setting) there will be an automatic transfer posting made to move inventory at IM level from source to desintation storage location.

  • How to create a new output type in inventory management

    dear consultants .
    how to create a new output type in inventory management...........?
    please give me a solution
    regards
    ratan

    Refer:
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/attaching-smartform-to-the-standard-transaction-2316027

  • Re : Condition table missing: Access Y003 10 (Output Inventory Management)

    Hi
            While doing migo using movement type 501 the following error is coming.
    "Condition table missing: Access Y003 10 (Output Inventory Management)"
    How to solve this.
    Thanks
    Anto

    Hi
    After creation of PO, any body chaged the access sequence?
    Check this out in SPRO- SAP IMG- Material Management- Purchasing- Conditions- Define Price determination process - Define access sequence.
    Regards,
    Raman

  • In internet sales can I make my webshop language dependent

    hi,
    In internet sales can I make my webshop language dependent??for eg. for french people webshop will be seen in french language....for chinese webshop will be seen in chinese.
    if yes can anybody tell me what are the settings required??

    Hi,
    Yes - the webshop should do this as standard.  It picks up the locale from your internet explorer settings and uses standard Java ResourceBundle logic to control the translations.
    You can also force the webshop to appear in a different language by adding language=xx to the URL, for example:-
    http://<host>:<port>/b2b/b2b/init.do?language=nl
    All of the translations are stored in .properties files inside the WEB-INF/classes/ folder inside the b2b.war archive.
    Hope this helps,
    Gareth Ryan.

  • How can I force a language on a "language dependent" InfoObject

    Hello Gurus
    I'm trying to run a report with a "language dependent" InfoObject .
    We need to show the description in a different language than the user language.
    The user enter the system with language = EN and the description should be with language key = HE.
    Any Ideas?
    Thanks in advanced
    Miri

    Use the BI translation for the objects to solve this issue.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30a65c3a-2ad5-2910-a4be-88412392cfe5
    The above URL gives the steps to perform the same.
    Make sure that the the target language is also already installed in the system before performing this activity.
    Hope this helps and solves your issue.
    Thanks
    Murali

  • Mughamrat Releases Mobile Inventory Management Control

    Mughamrat Releases Mobile Inventory Management Control
    MS3 Inventory Suite 1.2
    Ifran, Morocco -May 4, 2007- Mughamrat, CO. has announced the release
    of their Multilingual Mobile Inventory Management Control Suite 1.2
    for Window CE & Window Mobile. The Market leader in advanced mobility
    solutions and personalized technical customer support has designed MS3
    Inventory Suite 1.2 from the ground up to enable companies to create
    an all inclusive and highly integrated inventory tracking solution.
    MS3 Inventory Suite 1.2 unlike other existent mobile solutions offers
    an Arabic/English easy-to-use interface and a user support that works
    together to provide a reliable inventory option. Based on
    Microsoft's .NET 03 & 05 technology, it enables users to access
    multiple databases using a single application, and can streamline data
    entry with its highly "customizable" interface. Users can work in real
    time, offline or a combination of both, depending on connectivity
    availability. In addition, MS3 Inventory Suite 1.2 offers the perfect
    balance of performance and affordability.
    "MS Inventory Suite 1.2 module is an offspring of many successful
    years" Said Rudy R. Lachhab, Mughamrat's Regional Manager "Our
    extensive expertise in the supply chain of Mobile Solutions with a
    comprehensive approach to implementation are now offering MS3 with a
    significant leap in functionality, it is designed to operate side-by-
    side in handling daily operational requirements of daily distribution
    and inventory control activities within any organization"
    Since Mughamrat's foundation, its focus has been on developing the
    expertise and skills to implement mobility application solutions.
    Mughamrat has being offering tailor-made mobile solutions to large
    companies and organizations. The company now focuses on five specific
    areas of mobile solutions including Electronic Meter Reading, Mobile
    Van sales, Mobile Survey, Inventory Management control and General
    Inspection solutions. In addition, Mughamrat has extensive expertise
    in the migration of information technology products to support the
    Arabic language, along with the development of Arabic SDKs for all
    platforms, and mobility drivers for Arabic language applications.
    For more information, please contact:
    Rudy R. Lachhab
    Regional Manager
    Tel: +212 3 556 7409
    Fax : +212 3 556 7630
    [email protected]

    Radwan,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Print Smartforms in Inventory Management

    Dear Sappers,
    My client requires a lot of samrtform in INventory Management including SC DC, Stock Transfer DC, GR etc.GR Smartform is coming as per my configuration.But other smartforms are not coming as per y configuration.
    When I see the material documnet in MB02.I saw all the o/p types are coming for the respective transaction.Foe ex: If i'm going for Stock Transfer Smartform Print, I can see all the O/P types in the material document.So when I'm going to Print in MB90, the smartform is not triggering and system is giving one message.
    Output could not be displayed (it may not be complete) Message no. VN069
    Same thing applicable to S/C DC and other smartforms.
    Is there any link between movement types and O/P types with access sequence??
    Is there any other settings are there to take print????
    Our client requires a smartform for Sub Contract DC.It's developed.In Inventory management I've assigned the programme name and smartform name and made the necessary settings.Even though I made the print is not coming.
    Can anybody tell me where I've done the mistake?
    I've created my o/p copying the standard WLB3 and created my own.
    IN general data I put access sequence as 0004 & in default value I put dispatch time as 3 and transmission medium as 1.I made Print parameter as 7 plant/ storage location.
    In processing routine I put the necessary programme name and smartform name.
    In NACE, I've taken ME  - Inventory Management.Out O/P type and Trans/Event Type as WA, print Version 3, Print Item 3 and debit/Credit Indicator as H (Credit).
    I assigned the Printer name there.
    Apart from that I made the goods movement respect to plant and storage location as well as movement type.
    Still my print is not coming.
    Any suggestions.
    Thanks & Regards
    PKB
    Edited by: Pranaya Barik on Oct 13, 2009 1:48 PM

    Hi
    I'm waiting for the reply still I'm not getting any suggestions from.
    We've developed smart form for Sub Contract DC.I've made the necesssary settings for this. Still Smartform print is not coming.If anyone works on Smartform for S/C DC, tell me how to do the necessary settings to get print preview of S/C DC.
    Waiting for the respond??
    Thanks & Regards
    PKB

  • Implementing Barcoding in Inventory Management in MM

    Hello All,
    We would like to implement bar coding functionality in inventory Management (MM). What are the pre-requisites for that and within how much time it can be implemented. I also would like to know is there any interface available in SAP so that barcoding functionality can be directly deployed in SAP for IM?
    Your quick response is highly appreciated.
    Best regards.
    Sanjay

    Hello,
    1) We have created one Z Output type in our project.
    2) The condition record for that output type is maintained in transaction MN21
    3) Whenever a GR is created, output is automatically assigned to that material document and the bar code label gets printed.
    4) Technically a program needs to be created which needs to be asigned to your output in transaction NACE under category ME.
    Regards
    Karan

  • Initial download taking time for CTParts in syclo inventory manager 3.2

    Hi All,
    While doing the Initial download in syclo inventory manager 3.2 we have observed that it is taking a lot of time for fetching the data from the complex table CTParts.
    In agentry diagram CTParts complex table is showing nine fields, out of this nine fields few fields like UOM, BatchIndicator etc does not have any dependency.So can i delete those fields?
    If yes, what will be the impact on application after deleting those fields .
    Thanks for your help
    -Garima
    Tags edited by: Michael Appleby

    Garima,
    You  need to analyze couple of things before making any program changes:-
    a) Can you check if you have set filter for ctparts MDO object in SAP ?  if MDO filter for plant points to user parameter "WRK'  , look at value of WRK in SU3.  Make sure that you have plant value maintained for WRK parameter.
    b) if indeed WRK value is maintained then go to MARC and check the number of  materials that exists for WRK  plant. if it is too many then do you  really all those materials downloaded to Mobile device ? check if you can maintain other filters values to restrict material records downloaded like material type , material group etc.
    c) Check  the point of bottlecheck a) whether it takes more  time to execute query in SAP . b) whether it takes time to transfer data from SAP to Java layer.  if so try to increase Java heap size.
    d)  Also look at MDO  field selections for ctparts in SAP. Only  select fields that you want to do.
    e) Did you create additional indexes for ctparts  complex table ?
    f)  Finally if nothing works then look at option of replacing output structure in BAPI  which return CTparts with Z structure with only required 9 fields which also  requires Z Java code changes for ctparts complex table.
    Thanks
    Manju.

  • SAP Inventory management interface with Third party Warehouse System

    Hi Experts,
    Need your input for designing the SAP solution with existing Third party warehouse system ( Exacta ):-
    SAP ERP will be implemented for all locations of Client ( SAP MM, FI, PS , HR etc ).The Client has 10 distribution centres which are on Exacta Warehouse systems and will be linked with SAP Inventory management system.
    The way it will work - Goods receipt will always happen in SAP for all locations and then interface needs to Trigger subsequent Putaway activities at Exacta Ware house ( third party warehouse system) for those 10 locations.
    Goods Issue for these locations will happen from Exacta and then update will be posted in SAP via interface.
    All locations will be created as Plant /Storage locations in SAP.
    Need your inputs what special configurations need to happen in SAP for those locations so that goods receipt in SAP can trigger putaway activities in Exacta system .
    Do we need to do configuration for decentralised Warehouse in SAP for handling this?
    Pl. give your inputs based on your past experience where you handled such scenarios via interface with SAP Inventory management and legacy warehouse systems.
    Thanks for quick response on this.
    Regards,
    Krish

    Krish
    This is a std business process where clients have used their existing warehousing systems but implemented SAP forother functions such as Order entry, inventory mgmt and procurement, financials.
    The typical interface that needs to happen is
    1. Sales order ( and or delivery)
    2. Invetory needs to be passed to the WH. Typically people send it when SAP GR takes place.
    3. When WH system does picking, it sends signal to SAP which then does PGI for the sales order delivery and that takes the stock out of the system.
    Material master has to be transferred or mapped between two systems. Also, other elements need to be mapped between two systems.
    The way I have seen this happening is :
    you have an output on the SAP GR process. That creates an idoc to the WH system. Based on the capabilities of the WH system, it then does appropriate actions in the system.
    Many times, middlewares are used to translate/ map the data between SAP and the WH systems.
    So system wise, there is ALE setup that needs to take place for IDOC creations.
    Configuration and coding is required for the output type and the program behind it. There are several std FUnction Modules that can be used for this.
    Hope this helps.
    Mankai

  • Localization for Inventory Manager 4.0

    Hi guys,
    Do you have any documentation which explain how to configure the localization on Inventory Manager 4.0? or something similar. I need to configure Spanish as an alternative language for the mobile app, but I don't know what is the procedure to configure the spanish language for inventory manager? I guess I must copy the ini files from language packs... and put these files on the same location where the other files exist... but after that I don't know what else I should do...
    BR,
    MC
    Stephen Streeter Mark Pe Omar Candelaria Bill Froelich
    Tags edited by: Michael Appleby

    ok Mark Pe & Stephen Streeter , I see it now... thank you !!! ... I have done what Bill Froelich commented on Localization in Syclo Agentry for Spanish and German ...
    and when I saw the startup log it shows:
    16:24:00 09/08/2014: Event: 20, 153, Finished loading Production application definitions for default localization
    16:24:00 09/08/2014: Event: 20, 152, Loading Production application definitions for 'en' localization
    16:24:03 09/08/2014: Event: 20, 153, Finished loading Production application definitions for 'en' localization
    16:24:03 09/08/2014: Event: 20, 152, Loading Production application definitions for 'es' localization
    16:24:07 09/08/2014: Event: 20, 153, Finished loading Production application definitions for 'es' localization
    16:24:07 09/08/2014: Event: 20, 151, Finished loading Production application definitions using file "SAPIM-v1-0-0-app"
    That seems to be fine... now it loads the localization (english and spanish as suggested on the other post), but when I enter to the device (physical device), the client still shows the labels in english.... The regional settings on the devices says Spanish (Venezuela).. Is this configuration on regional setting has something to do with the fact the labels still are shown in english??... the language is always like this: Spanish (Argentina), Spanish (Chile), Spanish (Venezuela)... It does not have only spanish...
    BR,
    MC

  • Combined Report for Purchasing and Inventory Management.

    Hi All,
    Is there any standard SAP Report available where I can get all the information related to Purchasing and Inventory Management in one.
    Like Material,Purchasing details of the material (vendor, price etc ) and Inventory Management (Stock qty and value etc.).
    Regards,
    kumar

    I don't know any. We have one Z or if you want you can make a simple query.
    Best regards.

Maybe you are looking for