Inventory Management _Total Stock is not showing

Dear Expert,
This is new Inventory development I have extracted the data from BX to 0CI_C03 and compressed the request without No marker check,
And then loaded the BF with Initialization (without data transfer) and updated request with No marker check,
I could find out the Receipt quantity values and issue quantity as 0(very less in Dev), Problem here-
Total stock showing blank no values.
Please suggest
Many thanks in advance.
Regards,

Hi Kavitha,
Please review the document Re-initialization of the Material Stocks/Movements cube (0IC_C03) with 2LIS_03_BF, 2LIS_03_BX and 2LIS_03_UM in BW 7.x. It contains a step-by-step guide incl. useful explanation and background information.
Best regards,
Sander

Similar Messages

  • A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?

    Question repeated: A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?
    I want to restore from my june 2012 backup because it contains pictures that i lost when my phone broke in september. if anyone could help that would be awesome. thanks

    Did you tap "Show older backups" on the Choose Backup screen (see image below)?

  • Inventory Management: Valuated Stock Value

    Hello Experts -
    We're using inventory management. We're just bringing in 2lis_03_bf which is the material movements and the standard price datasource.
    The plant valuated stock quantity and the valuated stock value are fine. The SLOC valuated stock quantity is fine. We're using the non-cumulative key figures for the valuated stock quantity and the valuated stock value. The SLOC valuated stock value isn't correct. So I just created a calculated key figure where I'm multiplying the quantity with the standard price.
    This works fine but when I look at the plant level and use this CKF, the aggregation threw me off. So I changed the aggregation on CKF at the Bex level.
    This works fine in dev and qa where I don't have too much of data. But as soon as I'm in in production, the query times out and gives me an error saying I reached the buffer limit.
    I was thinking of calculating the valuated stock value at the ETL layer but now I'm thinking that if I do that and the price of a material changes, I'll again have the same problem. I can't re-load every time a material price changes.
    Can someone please help me with this scenario?
    Thanks!
    Edited by: Siegfried Szameitat on Oct 29, 2008 9:30 AM
    do not offer points, it is against the rules

    Hi Syed,
    Deriving values by multipling with price also not correct. results will not match with R/3.
    Value Calculation
    In principle, values are updated with Plant, Material, and Stock Category only. Quantities are updated with these characteristics, as well as with Storage Location, Batch Number, and Stock Characteristic
    Check SAP Note 589024: Evaluations in BW with the Characteristics Storage Location and Stck Char.).
    Hope it Helps
    Srini
    Edited by: Siegfried Szameitat on Oct 28, 2008 4:17 PM

  • Inventory Non cumulative values are not showing correct result

    Hi Guys,
    I have created a report on Inventory cube taking material in rows and 0T0TALSTCK and 0VALSTCKVAL in colums and i created a variable on calender day . What ever the date if we give we will get the quantity and value as on that date.
    Here Quantity is showing perfectly and in case of value it is showing wrongly. In this case the interesting thing is if we substract the  (Reciet value - Issue ) value then i am getting the correct value.
    Some times Even quantity is zero the noncumulative keyfigure (0VALSTCKVAL)is not showing zero it is showing some value but if i do (Reciet value - Issue ) it will show correctly.
    Please help on this issue.
    Thanks & Regards
    K.Srinivas

    Hi,
    when the quantity is correct, then you have a problem with the values. You have loaded the infocube correcly.
    check your keyfigures and the transformation with the BI content.
    => for example: do you have the coding in the BF transformation?
    * see OSS note 571669
        LOOP AT SOURCE_PACKAGE ASSIGNING <SOURCE_FIELDS>.
          IF <SOURCE_FIELDS>-stockcat EQ 'V' OR
             <SOURCE_FIELDS>-stocktype EQ 'V'.
            DELETE SOURCE_PACKAGE.
          ENDIF.
        ENDLOOP.
    => you have used the datasource 2LIS_03_UM. There are no quantities. Is there your problem.
    Sven

  • Problem with Adobe Extension Manager CC. Does not show installed extensions.

    Adobe Extension Manager CC does not show installed extensions for Photoshop CC 2014 or Photoshop CC so that I am unable to uninstall extensions.  This means that I cannot install updates to extensions.

    Hi JJ - thank you for getting back to me.  I got onto an Adobe tech and we tried various things including re-installation of Extension Manager, which didn't fix the problem.  We then updated Photoshop (I was one point release back) then re-installed EM and this has fixed the problem.
    I did check online and quite a number of people seem to have had this problem, so I guess Adobe has fixed whatever bug was in there.
    Thanks!
    Robert

  • Imported sealed Management Pack and its not showing up in Data Warehouse Job MPSyncJob

    Hello,
    When i try to Import a sealed Management Pack (with defined new Dimensions for Data Warehouse) it works fine, and it shows up under Management Packs under the Administration Pane. But its not showing up in the Data Warehouse Job "MPSyncJob".
    No errors in the Eventlog on the DW Management Server and cant see any errors in failed Data Warehouse Jobs either.
    I imported the MP three Days ago and still nothing.
    Now what?
    /Maekee

    I have a smaller SCSM Lab that i can import this MP in and the classes are created in the DW. Now is the question why its not working in my PreProd env and why i dont get any errors in the Event Log? Anyone that can Point me in the right direction for
    this?
    /Maekee

  • Manual Reorder point planning stock is not showing in MD04

    HI,
       Would any one help me when i plan for reorder point planing the details furnished below.
    Mrp type: V1
    Lot size :HB
    ROP : 30
    Max stock level :1000
    in Material master settings.But when i run the MRP using MD03 system is not showing available stock in MD04.It is showing 0 stock rather it would show 4 (MMBE un restricted stock..)
    What are thesettings required or any thing missing in IMG. Please help me in this.
    Regards,
    Srini

    Srini,
    You may also want to check if the Unrestricted stock is in a storage location that is excluded from MRP.
    On MD04 you will then see a separate line item at storage location & the Qty =4 should appear as shown below.
    12/02/2009     Unrest Stock                                                       12           12      
    12/02/2009     SLocSt     QANN StLoc: not plnd          0           8     QANN
    12/02/2009     SLocSt     VEND StLoc: not plnd          0           0      VEND
    Hope this helps. Good lcuk.
    thanks,
    Ramm

  • Inventory Management: Blocked stock coming up in OnHand

    Hello Experts -
    We've implemented 2LIS_03_BF for our inventory management reports.
    However, the OnHand quantity is also picking up Blocked quantity. I used the same code as given by SAP.
    For a material, the OnHand quantity is 13 in our reports when there's nothing under Unrestricted in MMBE. But there are 13 under Blocked.
    I looked at the code and the way the code is, it would pick up the Blocked quantity also.
    How do I resolve this issue?
    Thanks,
    Syed

    Hi,
    Which key figure are you using to get Stock on Hand?
    To get stock on hand we have to use 0TOTALSTCK - Quantity Total Stock and 0BLOCKEDSTK is for blocked stock
    These 2 are non-cumulative key figure.In update rules logic will be differentiated based on Stock type and stock category. For Blocked stock , stock type should be 'D' and stock category NA 'KR'.
    Please check update rules of BF.
    hope it helps...
    regards,
    Raju

  • Inventory Management - QM Stock

    Hi Gurus
    Have Few clarifications:-
    1) Doing the physical inventory for QM stock is advisable /mandatory (common business Impact)? if not explanation please...
    2) Generally Physical Inventory document does contain the single line .....how to accomadate in the same report if any withdrawls been made by lot wise.
    Appreciated your advise
    Rgds
    RG

    Hello RG,
    Generally we carry out physical inventory for auditing purposes. Also with help of physical inventory we can track balance in goods issue and goods reciept in am particular storage location / (storage type (in WM mamanged applications))
    It is recommended that physical inventory is carried out for unrestricted stock, because quality inspection stock can only be issued for sampling. We cannot issue quality inspection stock directly , indeed it needs to be first transfered to unrestricted stock for godds issue.
    General process hwich we follow for physical inventory is we create physical inventory document and then we do physical inventory count and then post the diffrences if any. (Recountingg is also applicable if differences are considerable)
    Now on point No. 2
    We can use posting block indicator while creating physical inventory document, which will restrict goods movement during physical inventory process.
    Posting block indicator is located in the HEADER of MI01 T-Code.
    The other method to carry out physical inventory is by FREEZE BOOK INVENTORY.
    With this goods movement are allowed during physical inventory process, but your book inventory (SAP) will not change.
    Br,
    Tushar

  • Inventory Management : Total stock turnover

    Hello,
           Can anyone tell me the logic for calculating Total Stock turnover & the Average quantity of total stock in an Inventory Management scenario.
    Thanks & Regards
    Indraneel

    Hi
    1. Warehouse Inventory Turnover of Total Stock  Specifies how often average total stock has been consumed. (Total consumption quantity / Total stock- average quantity)
    2. Average Total Stock Warehouse Inventory Turnover Specifies how often average total stock has been consumed based upon the average total usage. (Average total consumption quantity / Total stock u2013 average quantity)
    refer this if u still have queries
    http://help.sap.com/saphelp_nw04/helpdata/en/06/8c6cfe0e67fd43a6cd3603d246ced7/frameset.htm
    hope it helps

  • Installing SharePoint 2013 Workflow Manager offline - Wizard does not show up

    
    Hello guys,I recently tried to install the workflowmanager to the Application Server of my SharePoint 2013 Farm.I used the following commandline as suggested by spence harbar (in his article).SERVER -D:\SP\WorkflowManager\bin>WebpiCmd.exe /Install /Products:WorkflowManager /XML:D:\SP\WorkflowManager\feeds\latest\w
    ebproductlist.xml
    The wizard does not show up, instead of that, I got an message in my Commandbox:
    The software that you obtain using the Web Platform Installer Command Line Tool is licensed to you by its owner. Microsoft g
    rants you no rights for third party software.
    Successfully loaded primary feed: file:///D:/SP/WorkflowManager/feeds/latest/webproductlist.xml
    The following products are not available on this machine or already installed: WorkflowManager
    No products to be installed (either not available or already installed)
    Can anybody tell me what to do in this situation. I can´t uninstall the software because there is none.
    I need help with this! There is no information in the community about this problem :/
    Greetings Andre

    Hi,
    First of all that blog is old and now you should install Workflow Manager Refresh 1.0. To start fresh, uninstall all components of WF Manager from the server and then follow below mentioned steps.
    Download Microsoft Web Platform Installer 5.0 on a machine where Internet is there.
    Once Installed, go this path in command prompt C:\Program Files\Microsoft\Web Platform Installer and then use this command WebpiCmd.exe /offline /Products:WorkflowManagerRefresh /Path:C:\temp
    Copy the temp folder to the WF Manager machine where you wish to install the WF Manager
    In destination server, use command prompt with elevated privileges and navigate to the temp/bin directory (in copied folder).
    Use this command WebpiCmd.exe /Install /Products:ServiceBus_1_1 /XML:C:\temp\feeds\latest\webproductlist.xml
    Then run this command WebpiCmd.exe /Install /Products:WorkflowClient /XML:C:\temp\feeds\latest\webproductlist.xml
    Then run this command WebpiCmd.exe /Install /Products:WorkflowManagerRefresh /XML:C:\temp\feeds\latest\webproductlist.xml
    -Prashant

  • Data manager package log does not show Global variables!!

    Hello Experts,
    We are using BPC 10 sp14 Microsoft version with SQL Server 2008 R2. We are seeing an issue where datamanager package log does not show the Global variables defined in package script whereas in BPC 7.5 Global variable were visible in package log.
    Please let us know is this behavior changed in BPC 10?
    Below is the package script having Global variables and Package log not showing any of them.
    Thanks & Regards,
    Rohit
    Package Script:
    Package Log:

    Hi Ergin,
    As far as I remember it's by design...
    Vadim

  • Work Group Manager (10.6.8) not showing Mac Book 4,1 clients

    Hi Folks,
    Im having abit of an issue here after imaging 20 MacBooks (mostly 4,1 with some 3,1).  I used Deploy Studio to image the cart of 25 machines. The wokflow has each machine binding to OD and AD. The issue is the MacBooks are not showing up in WGM so i can apply the MCX settings. Only two have shown up so far and these are both the MacBook3,1.
    History:
    I used the same image two weeks ago on 25 2009 MBP. This worked perfectly. All MBP showed up in WGM right away.MCX settings were applied and all is good.
    Problems
    When i imaged the Macbook cart i found the Ethernet and Aiport names had switched around so the Login Window Profile would not work as it was attached to the Ethernet adaptor. I had to go into each Macbook delete both the Ethernet and AirPort Interfaces, recreate them and add the 802.1x (Login Profile ot the AirPort) to each MacBook. We use Login Profiles so students are forced to user their own AD accounts and authenticates to our wifi at the same time.
    I think the the only two MacBooks which did not have this issue were the 2 MacBook3,1, these are also the same two which showed up in WGM right away.
    When trying to manually the MacBook's to WGM, WGM said there was a machine with that IP or MAC address already added. The thing is i cant see it anywhere. Im even plugged into the same subnet as the workstations and i cant see them.
    I am wondering if there is any hardware related issues with the MacBook4,1 which are causing the issue. Also, i wonder because i had to delete around the Ethernet and Airport Adaptors if this caused the issue. Yet I dont know how to fix it.
    Is there a hidden file or Databse i can find the Hostnames and delete them, then re add them?
    Troubleshooting:
    Inspector is turned on.
    I have disjoined and rejoined the MacBooks (a sample) to OD and another OD at another campus
    Tried to manually add the cleints
    Reboot
    Manually added the MCX settings, but they are wiped out each time i log out and back in again.
    Tried accesing WGM from different OSX servers and OSs, 10.6, 10.8.
    Any help would be appreciated.
    Cheers
    a.

    Yes, it will run Snow Leopard. See the link below for requirements and ordering info.
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • Stocks level not showing in MMBE

    Hi experts,
    I have created stock in MB1C  with quantity 500  and it showed document 1 posted instead of ref no. before doing consignment i checked with MMBE but in unrestricted use nothing it is showing.. can anyone tell me what will be the error ? and how to resolve this..
    Regards,
    S.Govind

    it showed document 1 posted instead of ref no
    Not sure on this what do you mean by reference number.  Normally, once you post any inventory via MB1C, system will generate an internal reference number which is nothing but material document reference which can be seen in MB03.
    Assuming that in MB1C, with movement type 561, you would have uploaded the stocks, it should have been in unrestricted.  If you are unable to see in MMBE, check in MB51 just by maintaining the Posting Date.
    G. Lakshmipathi

  • Inventory management opening stock querry

    Hi,
    In the material movement report, it needs Opening stock, closing stock and the End Value.
    Can you please guide how I could Calculate.
    Though I calculate it by valuated stock and -1  day interval, but not getting proper value.
    Iz that necessery to append the field LABST(opening stock) and LBKUM (end Value),
    then remodeling the inventory cube 0ic_c03.
    So what will be the cmod include progame for that?
    regards,
    Balaram

    HI balaram,
    for enhancing the datasource refer the below How to - doc
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0eade6c-692a-2c10-ac86-80f6b2157791?QuickLink=index&overridelayout=true
    I have a note from the forums on the opening and Closing balance , may be you can give a try
    0VALSTCKQTY gives  Closing Balance.
    0VALSTCKQTY + Issues - Receipts = Opening Balance
    Regards,
    Sathya

Maybe you are looking for