Inventory offset decrease/increase and G/L decrease/increase account

Dear All,
What are the differences among Inventory offset decrease/increase and G/L decrease/increase account ? I have a training material that tells about them but give different result when using. Thanks a lot
Rgd
John

Hello
But in Indian Localization Help file has mentioned opposite. like
Inventory Offset Decrease Account, Inventory Offset Increase Account
These accounts are used as balancing accounts when the stock value is increased or decreased due to the creation of a material revaluation document.
G/L Decrease Account
An offsetting account to the Stock account used in Goods Issues and negative difference in Stock Postings (updates after inventory). You can change this account manually while creating its corresponding document.
G/L Increase Account
Offsetting account to the stock account used in goods receipts and positive differences in stock postings (updates after inventory). You can change this account manually while creating its corresponding document.
These wordings are directly copied by me from HELP File & i was also shocked to see such wrong thing bcoz at the time of using Goods Receipt & Issues i came across wrong a/c's & i had to change that setting though it was not matching Definition in HELP file.
Maybe SAP should rectify it.

Similar Messages

Kernal Task is increasing and it's decreasing my FREE RAM

Hi...
I've been noticing my RAM decreasing faster than before I installed the OS update to 10.4.9. I was looking at the Activity Monitor. I saw that the Kernal_Task activity is tremendously higher than the rest of the "Process Name." Is that normal? Also, when I launch any application, the Kernal-task increases even more and it doesn't decrease when I quit an application. Is that normal, too? My total RAM is 4.5 gigs.
Leigh-Anne

Hi
Read this about Kernal_Task:
http://forums.macosxhints.com/showpost.php?s=44f073c6e35c2c7f4958f7972e6f26b8&p= 183614&postcount=2
Steve

My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

Clean iPhone charging port with a clean dry toothbrush. The iPhone port has a short, and falsely senses it is in a dock device.

Issue on space . Disk space increases and decreases automatically

Hi All,
In our QA environment for past 2 days we are facing issue on space . some unusual behaviour. Taken threaddumps at that time and found the issue
"172.30.104.53 [1373723166026] <closed>" daemon prio=3 tid=0x0000000101dca800 nid=0x135f in Object.wait() [0xfffffffd8a9ff000]
   java.lang.Thread.State: WAITING (on object monitor)
        at java.lang.Object.wait(Native Method)
        - waiting on <0xfffffffdf9743658> (a com.day.j2ee.servletengine.HttpListener$Worker)
        at java.lang.Object.wait(Object.java:485)
        at com.day.j2ee.servletengine.HttpListener$Worker.await(HttpListener.java:587)
        - locked <0xfffffffdf9743658> (a com.day.j2ee.servletengine.HttpListener$Worker)
        at com.day.j2ee.servletengine.HttpListener$Worker.run(HttpListener.java:612)
        at java.lang.Thread.run(Thread.java:662)
Please let me know where exact issue on thread.

If you are seeing daily increases and decrease in your disk utilization (for example it increases during the day/overnaight but in the morning the disk space has recovered what you are seeing is the impact of Tar optimization.
The Tar Persistence manager is the underlying storage mechanism for CRX. Data is stored in append only tar files. This means the when you update a node or property the new values are written to the Tar files, the indexes are updated to point to the new location, but the old data is also still left in the file. This mechanism allows for a much faster write mechanism. So the more you frequently you update existing content in your repository the larger you Tar files becomes.
There is a process called Tar File Optimization that by default is scheduled to run from 2 AM to 5 AM server time. This process identifies all the orphaned data in the Tar files and deletes, there by reducing the size of the tar files on disk.
So if you are in heavy content migration mode, or moving large amounts of content between instances you can see large swings in your disk space utilization as the Tar file balloons up during the day and then shrinks back down over night. In some cases depending on how large your repository is the 3 hours allotted by default is not sufficent to complete the optimizaiton so you may not be recovering all your disk space. During normal production operations this will normally average out over time and the 3 hour window is enough. However during periods of heavy usage, especially during QA or content migration you may find that your tar files are ever increasing in size. If that happens you need pick a period of time over say a weekend and trigger the Tar File optimization to run until complete to recover as much of your disk space as possible.
See http://helpx.adobe.com/crx/kb/TarPMOptimization.html for details on Tar File Optimization.
As someone else pointed out you may also have an issue with your data store which requires a different clean up method.
Another possible culprit is your Lucene index files. Depending on your data model and repository size you can swings in your Lucene indexes because like the Tar File it periodically cleans itself up and large amounts of content change can cause this cycle to become more pronounced.
This blog post dicusses in more deapth both Tar File Optimization and Data Store garbage collection. http://blog.aemarchitect.com/2013/06/17/importance-of-aem-maintenance-procedures-for-non-p roduction-boxes/

When i increase my volume it increases after a while and when i decrease it decreases after a while

It used to be fine before but now whenever i increase/decrease my volume for anything it increases/decreases after a minute, i tried everything
still doesn't work!

It would be helpful if you indicated the EXACT model MBP and the installed OSX.
Try a PRAM reset:
http://support.apple.com/kb/ht1379
Ciao.

Volume bar increases and decreases normally, but no sound!

I'm having a problem where I can press the button to increase and decrease the volume and the bar goes up and down accordingly. However, there is no sound whatsoever coming out of the laptop, what might the problem be?

Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
    Make sure Mute is not enabled.
2. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications/Utilities/ Audio MIDI Setup.app
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so uncheck it.
Best.

My iPhone volume seems to increase and decrease by itself, why

Why does my iPhone 5s' volume increase and decrease by itself when connected via bluetooth to headphones, speakers, etc?

Do you have your Facebook app open when this is happening? Or any other app that gets live Notifications? If so, close them when listening to music. The Notifications being pushed to your device will lower the volume momentarily as they arrive.
Cheers,
GB

U: drive keeps increasing, and decreasing?

So basically my U: drive keeps increasing and decreasing.. I check it every day, and it says 16.2X (where x is a random number). Usually it is in the 16.2x range... For example: 16.27, 16.29, 16.23 ..etc... And I check my U: drive everyday.. I understand, that is not a problem, and its normal.
But, today I checked my U:drive, and I was SHOCKED, because now it says 16.5x.. Right now its at 16.52, and I have NOT INSTALLED ANY PROGRAMS.
Where in the world did 300mb of memory come from? Is it because I have been watching a lot of youtube videos?? I dont see how that would take up so much space..
How do I get back to normal which is 16.2x...?

Having the same problem every few seconds it adds a minute to the estimated time. This is really annoying. I'll call apple to figure something out because I need to backup to to icloud since I have a battery issue with my phone!

I am using i phone 4s 64 gb.recently got a re furbished phone.when i check it,i can see a minute difference,volume increase and decrease bottons are alligned upside down.what i can do now?

hi there,i am raj from new zealand.i am using my i phone 4s for the past two and half years.i found a difficulty with my phone and then i called apple care and send my old phone and got a refurbished piece in the starting of this year.
and recently i noticed that the volume increase and decrease bottons are mis placed(placed upside down).
as per my concern,apple is a great organisation and this mistake is going to be a big problem to their name and business.so please some one help me out to talk to a right person to deal about it.
thanks

If there is Warranty or AppleCare, take to Apple for resolution. If no coverage, do not worry about it, the button is the same either way. Your iPhone will function perfectly.

Remote will INCREASE volume but not decrease

I just purchased a Samsung 32" HDTV for a spare room. I have programmed the S10 remote according to instructions BUT the volume control on the remote will increase only - I cannot decrease the volume using the s10 remote. Obviously the Samsung remote works fine. I tried all the programming codes available on my list. Any thoughts? Thanx, Vic

- I believe the vol down button was the first to wear out. I always found irony in that.
Call in for a new remote. The remotes being shipped are S-20. There are differences in support & programming, but it should be fine for your case.

How to increase and descrease width/height of an item?

Hi,
My question is, there are so many item are displayed in the form and user wants to increase/decrease the size(width/height) of any item, just like we changes the size of any window.
how we can do the same in form at run time. if anyone is having solution pl fwd to me at [email protected] or [email protected]
thanks in advance.
Regards,
Anil

Hi Anil
Use the SET_ITEM_PROPERTY(item_name, WIDTH, y) for changing the width of the item and similarly for changinging the HEIGHT.
Put this command in a loop and assign the loop variable to the "y" variable in the SET_ITEM_PROPERTY. Doing this will change your item width and height at the run time.
try this and for any other queries in Forms , reports, ORACLE database pl. feel free to get in touch with me.
Ciao take care
Manish

Logic of determining value for Inventory offsetting line item

Hi,
I want to know the following for the reversal of Process Order for materials for which the price control is 'S'.
How the value for GBB (Inventory offsetting) is determined. I have observed it taking the weighted rate of the (Summation of the Total Actual Cost / Sumation of Actual Qunatity) * Reversal Quantity. The BSX line item is determined by Standard Price * Reversal Quantity
The balance is posted in the Price difference.
I want to know why this difference is determining tge line items.
I have gone thru SAP Note 216080 in this regard but failed to understandard the basic resaon why this is happening.
Regards
Partha

Dear colleague,
you are right
>note 422606:
a) The manufactured material has price control 'S' (Standard price).
   Valuation is carried out for goods receipts using the standard
   price that is currently valid.
   For the reversal of goods receipts, the valuation of the debit of
   the order (offsetting entry to stock posting) is carried out
   using the price determined from the quotient of value of goods
   received and quantity of goods received. That is, all previous
   goods receipts are used for the valuation of the reversal of a
   goods receipt, but order settlements are not used.
It is the standard system behaviour that the reversal of goods receipt
for production order are not valuated with standard price. All previous
goods receipts are used for the valuation of the reversal of a
goods receipt.
Goods receipts are always reversed with an average of the prices of
all goods receipts in the order history. Therefore price differences
may occur. This behaviour is as well explained in the attached
note 49995 in the reasons and prerequisites step. As well you find
an explanation in note's 422606 symptoms. the system tries to avoid the reversal
with posted values no longer possible.
If this replies your question ,please mark it as answered,
best regards,
maria

Inventory Management 0IC_C03: Beginning and ending inventory

Hi Gurus
My report is based on Inventory Management cube and I have a requirement where in I need to show Begining Inventory and Ending Inventory for Plant per Period.
There is no KF for Beginning Invin SAP standard model in inventory management cube (0IC_C03 cube), so I thought to restricting total quantity by Fiscal period and Offset by minus one to get begining inventory.
Here is my report layout:
I have got : Period , Plant in rows and Beginning and ending inventory in Columns.
Desired Output:
Fiscal Period | Plant | | Begining Inventory | Ending Inventory.
03/2009        | 1001 |    100                       | 50
Actual Report output
Fiscal Period | Plant | | Begining Inventory | Ending Inventory.
02/2009        | 1001 |                 100          |
03/2009        | 1001 |                                | 50
So basically report is being split on two lines for current and previous (due to restriction in begining period : Offset =-1 on period).
Question is how to achieve both begining and ending inventory for a period in same line.
Thanks in avdance for help and time
SA

HI Naveen
Thanks for the reply. Non *** KF are already being used and Standard SAP model is being followed. Problem is not with back end but with frontend. Data coming on the report is fine but problem is how to show them on same line. Remember Beginning inventory for current open is ending inventory for previous month and in SAP content there is no KF called as begining inventory. Basically data from two consecutive periods (current and previous one) needs to be on same row of report, but they are coming on different rows if we have period in drilldown by period. this makes sense but how to overcome this.
This, We have all the correct data but facing issue while displaying that on frontend.
Thanks
Sorabh
Edited by: Sorabh on Mar 23, 2009 5:01 PM

Inventory Issue Report by Inventory Offset account in XL Report

Hi All,
I generated the XL report for All inventory Goods issues with quantity and values in SAP 2007b, I am facing a problem for sorting the report by Inventory offset account.
Can Anybody help me.
Regards,
Kirankumar.a

Hi
Is offset account column is available in your excel sheet ?
Exactly which SAP B1 reporting option you have used ?
Please mention all the steps you have followed to derive the report.
BR
Samir Gandhi

All Inventories Value Report&Inventory Ageing Report& Current And as on Date Stock not matching

Hello All,
I am new to inventory. I need some help.
After opening the periods of purchasing and inventory for the month of April'15. The below reports should match in costing.
But they are not matching. Kindly help on this as its PROD.
Inventory Ageing Report
Current And as on Date Stock Statement With Value Report
All Inventories Value Report - Average Costing
Thanks
RR

MBEWH is the valuation history, this is only updated with the first movement after a period closure. And the period is a month.
There is no table in SAP that holds the stock information on daily basis.
You have to develope this yourself. Easiest method by copying a table like MBEW and MARD daily to a Z-Table.
A stock situation at a certain date can be calculated with MB5B.
Edited by: Jürgen L. on Aug 5, 2008 4:06 PM

Inventory offset decrease/increase and G/L decrease/increase account

Similar Messages

Maybe you are looking for