Inventory Only 10.2.1 on SLES10

Two servers with Inventory Only Agent 10.2.1:
1. HP ProLiant DL320 G5 with SLES10 SP2 (64 bit)
2. HP NetServer LH3 with SLES10 SP2 (32 bit)
In reports:
1. "Total Memory: 0 MB" - is not easy-to-use.
2. "Last Scan Date: 6:33 PM" = Local Time + 3 (?). I have not understood.
The time setting of all servers is GMT+3. Why does it add 3 hours to Local time?
Maksim Reznikov

Maksim,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

  • Remotely installing the Inventory Only Module

    Version 11.3
    I want to install the inventory only module to multiple windows devices. The only documentation I can find states you have to download the agent and install at the windows device. https://www.novell.com/documentation...deployment.pdf. Is there a way to install this module using the ZENworks console? I can't seem to find it. Deployment task is only set to to install the ZENworks Adaptive Agent.
    Thanks,
    Bill

    I also like to point out that the Discovery tool is not designed to be
    the only way or even necessarily the main way of pushing agents.
    Login Scripts, AD Scripts, or any other management tool can push the
    agents (If you don't have any management tools, you should be
    considering the full product.)
    Even a Scripted PSEXEC would work for you, but only in theory.
    The issue is that by default, Non-Domain Joined PCs will not permit
    remote software installation unless you perform quite a bit of manual
    configuration. So if your PCs are not in a domain and you have no
    management tools, you will need to visit the PC to manually configure it
    to allow a remote push at a future time that you hope the PC may be
    powered on and not in use. So if you are going to do all that work, it
    would only make sense to install the agent while you are there at that time.
    In my mind, the Discovery and Deployment tool is best for discovering
    straggler devices missing the agent and less at deploying since there
    are so many limitations due to the very nature of basic default Windows
    security.
    The best bet in my mind is to try and figure out a way to use your
    current management methods, even if they are as simple as logon scripts,
    to push/pull down the agent instead of trying to remotely access the PC
    in the hopes it is on, since that method has a whole series of hurdles
    that are tough to overcome.
    On 10/8/2014 8:30 AM, Shaun Pond wrote:
    > [email protected],
    >
    > then it becomes a much bigger beast to deal with - the full agent has
    > the capability of being pushed, but the inventory only agent wasn't
    > designed to do that.
    >
    Going to Brainshare 2014?
    http://www.brainshare.com
    Use Registration Code "nvlcwilson" for $300 off!
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Technical Support Engineer
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • Installing Inventory only agent on VMWare ESXi

    Hello,
    did anybody manage to install the Inventory-only-Agent (V 11.2.3) on a
    VMWare ESXi 5.1-Server? We would like to collect the inventory data for
    our CMDB. When i start the installation i get the follwoing errors:
    /tmp # ./zenumia-install.sh -s mycollectionserver
    Collection Server is mycollectionserver
    installing zenumia to /opt/novell/zenworks/umia
    ../zenumia-install.sh: line 188: arch: not found
    unrecognized OS, not setting SIPLATFORM
    OS tagged as unknown, sysinfo package is mcsysinfo-noui-10-.sh
    ../zenumia-install.sh: line 223: whoami: not found
    user is
    Must be root to install. Aborting install.
    So there are some needed commands like "whoami" missing and the OS ist
    unknown.
    I tried to collect the inventory data via a Discovery task, but the
    collected information is quite poor. No vendor-specific Hardware info, etc.
    Kind regards,
    Thomas

    Thomas,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Inventory Only vs. Managed

    I want to Inventory our Servers (100+). We have ZCM10 with the Asset Mgmt module added. We have 1 Zone, but we have a Satellite office that has it's own servers that they will Inventory. Of course we also have workstations that will be fully managed at each site as well.
    I put the Inventory only client on a Windows server and it shows up under Devices/Servers on the Inventoried tab. Looks good.
    Now I want to configure the Inventory policies - in particular when my servers at my location get scanned and what the Data Collection Form looks like. I can set this at the top Zone level under Configuration, Inventory but that will affect all Servers, Workstations, etc. I can set it at the Devices, Managed, Servers level but these are Inventoried Only not Managed. There is no Settings - Inventory tab for Inventoried Only.
    How can I separate Inventoried Only Servers out and apply Inventory policies only to those.

    cleik,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • UIACONFIG & Inventory only agent.

    Does anyone have any idea on how to get the proper uiaconfig.xml file into the packaged inventory only agent. The problem is that when the agent runs it has a blank file and doesn't report back. I would think this would kind of be a default that I am missing, but if not the answer may be just to create a custom MSI that runs.
    The reason for this, is that in our environment we want the ability to push the inventory agent out via login script to get all workstations during our ongoing deployment of the full ZCM agent.

    ggalyas,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Inventory Only Software Usage

    Hello,
    A little question,
    Is the "Software usage" feature (Hours open/hours active) is enabled on workstations with the inventory only agent ?
    Thanks for your answer.
    Sincerly,
    Julien.

    jupap7,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Inventory Only Agent 11.2.3a for AIX 7

    Hi: Someone has installed the inventory only 11.2.3a on AIX 7.1?
    Is supported? I saw in the documentation of 11.2 which is only supported on AIX 6.1...
    The Comments are welcome... Sergio.

    On 04/04/2013 18:46, pwolff2000 wrote:
    > Is this suppose to work?? I have the latest ZCM managed Mac agent
    > installed and running correctly on OSX 10.6, but my attempt to duplicate
    > that success with 10.8 is a NO GO. I can never get the MAC Computer to
    > show a list of Closest Servers, therefore no Inventory. The computer
    > shows registered and does appear in ZCC. I also can not Remote Control
    > the computer, it allows the connection (using Password) but never shows
    > a desktop, just a plain gray screen. Any help is welcome!
    I note subject includes "11.2.3" - presumably you're aware that was
    pulled and we're awaiting 11.2.3a?
    I'm also guessing that by "10.8" you don't mean 10.8.0 so which version
    of 10.8 are you testing? 10.8.x
    Are you hosting ZENworks on Windows Server or Linux? I don't think it
    matters but I can test against ZENworks on Linux.
    HTH.
    Simon
    Novell Knowledge Partner

  • Inventory posting - stock in transit G/L account

    Hello!
    We have a unique requirement that we need to post the stock in transit inventory only if the delivery is for one particular customer (sold to party). It is our own company but not on SAP hence, on the books, an inter company transaction. All that is different in this case is the account assignment group of the customer which basically is no help in configuring OMWB (G/L account determination for inventory postings).
    The material/plants/movement types are all the same for all transactions, thereby providing us with no 'uniqueness' in this particular transaction to post these stock in transit inventories to a different G/L. I could possibly look at having another movement type if that can help but then again, how will that be valid only for a particular transaction with this customer, I am not sure...
    Can anybody provide me with a step by step instructions on how can this be achieved, if it indeed can be? Appreciate any help or posting here if anyone wants any more clarifications on the issue...
    Many thanks!

    Hi,
    As you might already know that the G/L determination happen based on Movt type and the valuation class. in your case as the movt type and the val class are same, you willl not be able to customize to post it to different account
    so for this you do 2 ways:
    1: you create a new delyvery type and a new movement type so that you can configure the account determination (OMWB).
    2. you can influence the account determination by writing a code in the user exit ZXMBCU02 here you can force the system to post it into the different G/L account.
    Hope this helps,
    Vikrama

  • Agent inventories Macs HW only or none seemingly at random

    The Inventory Only Agent (10.3) has NEVER worked in our heterogenous environment. After investigating the installation, OS, logs, etc., here is what I have found so far:
    1. The installation goes smoothly and indicates that in the /var/log/zenumia-install.log
    2. The inventory files (sp.spx, *-last.pdict) on the client have full inventories
    3. There is nothing that differentiates the HW & SW, HW only, and No inventoried systems.
    4. The OS are 10.5.8 and 10.6.6, but that doesn't seem to have any bearing on the outcome.
    5. The XML inventory file that gets created and uploaded to the server is the first indication of the problem. It reveals HW & SW, HW only, or No inventories, which means what ever creates the XML file on the client isn't reading the inventory files in the /usr/local/novell/zenumia/umia folder, at least not properly.
    Tried deleteing .pdict, .xml, and .cfg files, changing inventory schedule on server, fixing permissions, clearing caches, even completely removing agent and reinstalling new agent. All systems report the same respective degree of inventory.
    It would help if I knew the actual detailed process used to collect and create the XML file. Or if someone knows the problem, I would sure like to hear it. Thank you to any and all for any help you can provide.

    cnorris63,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • New Inventoried Devices are not shown in ZCC

    Hello,
    we are using ZCM 10.3.1. In the past i installed the Inventory-only
    Agent on serveral devices. After a little while they are visible in ZCC.
    But this doesn't seem to work anymore.
    A few days ago, i installed the Inventory-only client on several devices
    but they are not visible in ZCC. I looked in the file "uiaconfig.xml" on
    the client. There are no entries for my ZCM-Servers in this file. I
    added the IP-address of one server like <server>ipaddress:80</server>
    and restarted the agent, but his did not help. I am not sure if it is a
    client or server problem. Where can i start searching?
    Any help would be appreciated.
    Kind regards,
    Thomas

    Thomas,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • LMS 4 Devices added but not shown in inventory

    Hello,
    By reruning discovery with new seeds etc I have more devices discovered.
    Howeverr they are not shown in the inventory, only in the Device Discovery Summary however.
    Any help, is welcome.

    Hi,
    Kindly go to Inventory> Job Browsers> Inventory Collection and create new job for all the devices. Kindly note down the numbers of devices selected for the job.It should show up all the 164devices there.
    Thanks,
    Gaganjeet
    Inventory> Job  Browsers> Inventory Collection

  • Inventory differences

    Hello
    I'm working with a copy of 0IC_C03 Infocube for inventory,  like a standard process I have loaded:
    1.- 2LIS_03_BX  extractor for openning balance
    2.- 2LIS_03_BF  extractor for material movements
    3.- 2LIS_03_UM extractor for revalorization
    and additionaly  I have loaded  2LIS_40_REVAL revaluation too   but afther this I have differences in Inventory  only in Inventory Values in Units all  validation is right with ECC.
    Some step is missing for my correct process?
    Thanks
    Juana Rosa Sosa G.

    Hi,
    Just check the transformation rules and find out the following:
    1 - The BW process key/movement types, stock indicator and stock type used to calculate the value which is not matching. Get all the conditions form all the 4 flows: BX, BF, UM, 40 REVAL.
    2 - Now check the value in ECC RSA3 and apply the same conditions on the RSA3 data for all the 4 datasources.
    3 - Now you compare and see where exactly data is getting differentiated.
    Let us know your observations.

  • ZCM 10,3 Inventory Apple

    Hi,
    i am trying to get my apple systems to inventory. I installed the inventory.dmg file and rebooted a few times. The mac does not seem to show up in inventoried only devices.
    I am wondering if this is because of of invalid certificate error? when i go to the ZCC on my server i get safari cannot identify website "server ip". I opened it and hit always trust from that ip. But still when i close and reopen ZCC it shows certificate invalid.
    Maybe that is not the issue. Anyone have any idea where or how i can start troubleshooting this?
    thanks

    todd,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Execute Inventory with Cycle-Counting Method and by Quants

    Hi Gurus,
    I would like to Implement the Inventory by quant on WM.
    This is because I would like to Inventory only 1 material per Bin.
    I found transaction LICC, but when I try to activate the Document an error message say that the Inventory Document Range (LVS_IVNUM) does not exist.
    How can I create this range? Have you got a manual for this implementation?
    Another Question: the Inventory count is allready implemented and there is still a range of Inventory Documents created and managed by LI01N, LX26..the Cycle Counting by quants can interferate with the one allready implemented?
    Thanks & Regards,
    Simone

    Hi,
    For the LICC issue I had same problem. Direct in production you need to maintain number ranges in LN05 for your warehouse.
    Thanks.

  • Inventory of non domain PC

    I have a Windows 2000 PC on the domain. It doesn't have the full ZCM agent. I installed the inventory only agent, and within 5 minutes it showed up on my devices under inventoried.
    I have a Windows 2000 server that is not on my domain. It's at a remote WAN. I have installed the inventory agent, but it never registers. It has access to http://ZCC:80 as IE shows the logon page.
    Is there something special that needs done for PC's which are not domain members? I see no logs.

    acmenews,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

Maybe you are looking for