"Inventory Proposal" field on Cycle Counting (tcode LX26).

Hi Experts,
I have one user asking about the "Inventory proposal" field on tcode LX26 results. How or where the system calculate this field? What this value means?
Appreciate any help,
Erich.

Hi Jürgen,
Thanks for your help. I have checked your thread, however I would like to know how the system calculate the field "Inventory proposal" on tcode LX26.
For example, in the LX26 results the field "Inventory Proposal" shows the value 35 and there are only 6 storage bins selected at the bottom of the screen. My question is, why the field "Inventory proposal" shows the value 35? How the system calculate this value/field?
Thanks once more and regards,
Erich.

Similar Messages

  • Cycle Count in LX26...Can I display all quants ??

    Hi,
    I am trying to do cycle counting using LX26 in SAP.
    I want to count based on the material for the entire warehouse.
    For example: I want to count for warehouse W01 for the next one month.
    The warehouse manager should have the ability to assign counters based on material ( eg: He should be able to pick Material "A" which resides in 5 different bins and assign it to a counter)
    THE PROBLEM comes when in 1 bin there is more than 1 quant , then the system proposes the bin separately as "Several Quants" , and not in the list for the material.
    Is there a setting that would display all material sorted by bin ? So, even if there are 2 different quants in a bin, it would list out the quants for the counter to select ??
    Please advice !!

    Thanks....I removed the CC indicator in the material master.
    But if the material is in the same bin with another material ( with CC active) , it still comes up in LX26
    Example:
    Material A - No CC Indicator
    Material B- CC Indicator of "A"
    Both of them are in Bin - B1
    If I run LX26 , I get bin B1 with "Multiple Quants" and relevant for Cycle counting !!!
    Can you help?

  • Status field in Cycle count

    Hi all,
    Is it possible to involve the "status field" of the meterial in Cycle count procvess. Here the client need is to count the material at material status level.
    If this possible, please let me know the t-codes / Process flow.
    thanks & regards
    Chaitanya Rayaprolu

    Explain what your  status is and what it controls, and where you maintain it.
    In general SAP materials can have material statuses to control business.
    However these statuses are not visible in a phyiscal inventory document or in its selection screen.
    you have to modify screens, programs and forms to make such status visible for physical inventory.

  • Physical inventory document created for Cycle counting

    There are lot of physical inventory documents are created for materials around 2500 automaticallly
    I have checked all MMR for materials, all these material set with cycle counting indicator 3 which mean that 25 pdhysical inventories and 10 physical intervels.
    I have checked batch input  but i did not any found  batch input posted for this..
    How the physical inventory documents are created automatically for these materilas.
    Plz thorugh some light on me..

    Hi
    There is a process for creating the physical inventory document of your inventory. The lines are separately created for each product batch.
    Probably the  process will be scheduled and therefore it is executed and created the document.
    Regards
    Imran

  • Transaction MIBC-- ABC Analysis for Cycle Counting - Physical Inventory

    Dear Friends,
    Could you please explain me the cycle count indicator relationship to the percentage of inventory to be counted.
    When i am using MIBC transaction and changing the Percentages....based on percentages the system is proposing the new cycle count indicators for the materials.
    Thanks in advance
    Sanjay

    Dear Sanjay,
    I would recommend you to write your question into the ERP - Logistics Materials Management (MM) topic. I suppose you will get more information about MIBC there.
    Regards,
    Ely

  • Cycle count

    We do cycle count physical inventory in one storage type in one
    Warehouse, every 30 days on around mid of every month and annual count
    physical inventory on 31st Dec every year.
    But due to annual count done on 31st Dec, old PI dates of bins are
    updated as 31st Dec and new PI dates are proposed as 30th Jan.
    So the regular cycle count dates are modified. Business does not want
    the PI dates so modified due to recent Annual count, rather needs the
    old PI dates displayed as per regular cycle count in LX26 run.
    Kindly suggest how to restore old PI dates as per cycle count physical
    inventory.

    yes you need a custom program for an update.
    I never needed to run RLREOLPQ manually, SAP knows when the year is over. This report is probably only needed if you want reset counts within a fiscal year, maybe used when your company is sold in the middle of the year, and the new owner does not accept the already done counts.

  • Cycle counting happening not beyond fiscal year

    Hello
    We tried to run Cycle counting using LX26 but got error as IM settings are not done,we ran MIBC
    The issue here is we can't push the counting date beyond the fiscal year end. If I run the transaction LX26 in either QAS or Prod it will work just fine if I keep the date before 31.03.2012.
    Result of this issue is that all parts classified as C or D, are not being suggested for counting. As most of our stock is rated C or D by the ABC analysis that means that a lot of parts will not be counted, while they should be counted.
    So what I need is a way to be able to count all types of stock using an inventory process in SAP, if there is another transaction that does count C and D classified stock that would be very helpful.
    Factory calendar validdity is from 1996 to 2020.
    Transactions I use now:
            For creating inventory documents LX26
            Printing inventory documents ZLI04
            Inputting count results LI11N
            Processing count results LI14, LI20 and ZLI21
    Thanks in advance for helping us
    Bheema

    simha lakkoor wrote:
    Hello
    > Thanks for your answer but we have maintained AB C D indicators for the plant (xxxx) in the OMCO screen with no of physical inventories,interval,float time etc
    > What more we need to maintain. please revert back with your suggestions.
    > Regards
    > Bheema
    Why a setting in OMCO without intervals? complete the customizing according to SAP design, your cusotmizing is incomplete

  • Cycle count error "HU 100201 not in an HU-managed storage location" in LX26

    Hi,
    I get the following error message "Handling unit 1000020118 is not in an HU-managed storage location" When i try to initiate a cycle count for a bin through LX26 Tcode. Kindly advice about the cause of the problem and how I can fix it.
    Thank you for reading

    I am not sure but it probably is not, sorry looks like i posted this on the wrong forum

  • Cycle count inventory

    Hi everybody,
    When doing a cycle count via tx LX26, the following error appears:
    "CC inventory not prepared in IM
    Message no. L4173"
    I've read some threads regarding this item, and what I have done is the following:
    OMNK - activate cycle counting for my warehouse and storage types.
    ommb - for number ranges
    IMG > Logistics Execution > Warehouse Management > Activities > Physical Inventory > Dynamic Cycle Counting > General Settings > Define Storage Type Settings
    omco
    article master data (when using mibc all articles appear with the cc indicater filled)
    I think I have everything correctly configured and there is no stp missing, but the reality is that I am not able to perform the cycle count.
    Any idea?
    Thanks

    Have you made material master settings ?
    Marking Materials for Cycle Counting
    This step is only required if you perform cycle counting for the first time or if you want to update the cycle counting indicators.
    In the material master record (storage data), maintain the cycle counting indicator for all the materials that are to be included in cycle counting.
    You can set the indicator in one of the following two ways:
    manually in the material master record. To do this, choose Material ® Change from the Material Master menu.
    automatically using ABC analysis To do this, choose Special procedures ® Cycle counting ® Set CC indicator from the Physical Inventory menu.
    Edited by: Nick Whitehurst on Aug 12, 2010 4:58 PM

  • Cycle Count - LX26 vs LICC

    Hi! I would like to confirm the functionality for the above stock take transactions. If I have multiple materials set with different cycle count indicator and these materials can be placed in the same storage bin, does that mean that I should be running LICC instead of LX26 if I only want to stock take those materials that are valid for the stock take period?
    What is the disadvantage here with using LICC? That the block will only apply to the quant but not the bin?
    Appreciate clarification on the above.
    Thanks!
    SF

    If I have multiple materials set with different cycle count indicator and these materials can be placed in the same storage bin, does that mean that I should be running LICC instead of LX26 if I only want to stock take those materials that are valid for the stock take period?
    Yes, LICC is the appropriate method , since this will not block the whole bin.
    It will only block the related quant of the material and "inventory active" indicator will be set on the quant.
    What is the disadvantage here with using LICC? That the block will only apply to the quant but not the bin?
    Yes already answered

  • Execute Inventory with Cycle-Counting Method and by Quants

    Hi Gurus,
    I would like to Implement the Inventory by quant on WM.
    This is because I would like to Inventory only 1 material per Bin.
    I found transaction LICC, but when I try to activate the Document an error message say that the Inventory Document Range (LVS_IVNUM) does not exist.
    How can I create this range? Have you got a manual for this implementation?
    Another Question: the Inventory count is allready implemented and there is still a range of Inventory Documents created and managed by LI01N, LX26..the Cycle Counting by quants can interferate with the one allready implemented?
    Thanks & Regards,
    Simone

    Hi,
    For the LICC issue I had same problem. Direct in production you need to maintain number ranges in LN05 for your warehouse.
    Thanks.

  • Step to  Configuration  the Physcial Inventory & Cycle counting

    Guru
    PL help Me the detailed steps to configure  for Physical Inventory & cycle counting required
    Thanks
    sudhir

    hi
    you have to do the settings
    Materials Management -- > Inventory Management and Physical Inventory --> Physical Inventory & Inventory Sampling
    Field Selection for Physical Inventory
    Default Values for Physical Inventory
    Settings for Physical Inventory
    Default Values for Batch Input
    Maintain Copy Rules for Reference Documents
    Allow Freezing of Book Inventory Balance in Storage Location
    Create Inventory Sampling Profiles
    Define Stock Management Levels
    Define Stock Management Levels in WMS
    Cycle Counting
    Activate Distribution of Consumption Differences

  • Physical inventory  cycle counting

    hi friends,
                       i have maintained cc indicator in mmr and period of counting set in omco. but while running the physical inventory , it is not showing the list. so can anybody give the cycle counting procedure with tcodes. i will award full points. thanx

    Friend
    Go through the following links. useful for you to know what exactly has gone wrong in you case
    http://www.sap-img.com/mm010.htm
    help.sap.com/saphelp_47x200/helpdata/en/4a/58dc3ecb9f2e5ae10000000a114084/content.htm
    SAP Enjoy
    Regards

  • Fields in MCHB table for cycle counting

    Hi Experts,
    There is a requirement in my program that if the values of the follwoing stocks are there in MCHB table then change the date of creation when cycle counting is performed at the end of the year:
    Blocked
    In qual. insp.
    Restricted-use
    Returns
    Stock in tfr
    Unrestricted
    Can anyone tell me that which field are there in MCHB table coressponding stock  types.I can see some fields starting with CV* and some with KZ* for BLocked, restricted..etc

    Blocked  - CSPEM
    In qual. insp. - CINSM
    Restricted-use - CEINM
    Returns - CRETM
    Stock in tfr - CUMLM
    Unrestricted  - CLABS
    These are the fields

  • Cycle count and inventory document generation

    hi.
    Currrent Scenario : Cycle count has been configured for Quarterly cycle count for 20 materials.
    Float period has been set for 5 days.
    Procedure : Customer wants to do inventroy count for the  20 materials at the rate of one material per day.
    Question : 20 Materials falling under "C" quarterly cycle count show up for Physical inventory.
    Can the customer create an inventory document for <b>inventory count each day for each material</b> or will they have to create 20 inventory documents for count at one go since the float period is set for 5days.
    Will the float period indicated play a part if the physical inventory is planned for each material on separate days.
    Or if an physical inventory has been planned for the quarterly managed material, all material in that category say "C" would anyway show up during the quarterly inventory cycle count period.And the inventory count can be done for each material on seperate days.
    Thanks

    hi Arif.,
    Earlier situation : Cycle count procedure was only A.
    Present situation : Cycle count procedure is now ABCD .
    But only C.c indicator A is still active for all material. We have not
    changed the Cc indicators for any material.
    Transported to production on Friday.
    My question is :
    On monday ,when the batch program was executed for printing of inventory
    documents, Why does it generate a whole lot inventory documents for
    Materials which have not been inventored even when the C.c indicators
    remain A for all the Materials.We have not even in-corporated the
    Quarterly cycle count indicators for the few selected materials.
    Should the system:
    1. Print Inventory documents only for the current period or
    2. Is the system behaving properly due to the change in Cycle count?
    Only the Cycle count procedure has been changed to 4 times in a fiscal year.
    Do review the information and update me.

Maybe you are looking for