Inventory report that can show min/max

Dear All,
Our client is looking for the inventory report for items that fall below the min levels (per warehouse and per item level). Is there an existing report can tell us those info? I cannot find it anywhere in SAP. Thanks.
Regards,
Yuka

Hi Gordon,
I suggested our client to use a simple user query but they said they were under the impression this was a readily available report. I don't believe there is any but just in case there is any. Thanks for the respond. I will let them know.
Regards,
Yuka

Similar Messages

  • R/3 report that can show the inventory aging

    Hi Gurus,
            Pls adv whether there is any R/3 report that can show the inventory aging. We know there is a BW report RDD861 can serve this purpose but we would like to have same report pulled from R/3.
    please advice asap and do the needful.
    Regards
    KRISHNA

    Not sure exactly what your complete requirements are but you could try the following standard reports to see if any fit your needs.
    Real-Time
    MC50 - Dead stock
    MC46 - Slow-moving items
    MC44 - Inventory turnover
    LIS Reports
    MC.2 - Receipts/issues
    MC.3 - Inventory turnover
    Regards

  • Is there any report that can show tax rates per tax code per state

    Hello Gurus,
    I checked all standard SAP reports and they only list taxes based on the documents created. I am trying to develop a list of tax rates that are based on each tax code per state. Can some one suggest me how I can go about this.

    Hi,
    Are you using SAP to derive tax rates at Jurisdiction level or a third party like Vertex or taxware? I haven't come accross a situation where we configure SAP to maintain tax rates per state. It is connected to third party via RFC and the rate is derived based on the jurisdiction code however, we configure the jurisdiction code numbering and levels in SAP.
    Thanks
    Manoj

  • Report that can take the system: (users, utilization, T-CODE)

    I need a report that can take the system:
    How many times a user logged into the system in the last month
    Most used transactions
    Changes passwords.
    Etc., all you have to do with a user-level tuning.
    thanks,
    VLopes

    Hi
    If you Activate the audit log you can keep track all information,
    have a look at   -successful and unsuccessful dialog and RFC logon attempts
                             --successful and unsuccessful transaction and report stats ...
                             how many times a user logged -in and all .yah you need to count
                             the number of times a user logged based on the report.
    Once you activate....every day transaction details are recorded for every user
    who tries to log in.keep an eye on the below parameters
    In RZ10
    rsau/enable :set to 1 to activate audit logging
    rsau/local/file   :to specify name and location of audit log file
    rsau/max_diskspace/local :To specify maximum space for audit file say if
                                                max.size is reached auditing stops
    Hope that helps.
    regards
    Manjula .U

  • Is there a button that can show your deleted messages

    Is there a button that can show your deleted messages

    Add-ons are contained in Firefox; they don't have any access to programs running on your computer. The following add-ons can monitor your bandwidth usage in Firefox.
    * https://addons.mozilla.org/firefox/addon/datafox/
    * https://addons.mozilla.org/firefox/addon/minimeter/
    Any good software firewall lets you control which programs connect to the Internet.
    * https://en.wikipedia.org/wiki/Comparison_of_firewalls
    If you need to see how much bandwidth various programs use up, look for a bandwidth monitoring tool.
    * http://www.softpedia.com/get/Network-Tools/Bandwidth-Tools/

  • Premiere CS3-Is there a video/Website that can show me all that it can do?

    I was just wondering if anybody knew of a video/website that can show me all the effects etc of premiere cs3.I have looked through the tutorials that came with the product but feel that they don't really offer any great detail as to what the effects do or what's in the pallet.
    I do realize that there are tutorials that you can pay Adobe $150 or so for but I'm looking for something a bit less expensive than that!
    Many Thanks

    Dougie,
    I've not seen, what you're looking for, all in one place. I've got a myriad number of books (CS2), and have downloaded many tutorials. What it seems is that one can explore a feature at a time, and then catalog that knowledge, before moving on to the next Effect. The Help files F1 probably put as much in one place as any book in my library. Unfortunately, one needs to "read between the lines," to get the full potential of each Effect - that, and check out discussion on it here. Some of the names can be a bit confusing, and when looking to do something, picking and using the right Effect might take some time, and be partially counter-intuitive too.
    One of the best ways that I've found is to experiment with the Effects, and their settings, after reading up on them in F1. Then, if things still do not seem to be working, formulate a question, "I want to do X. What Effect should I choose?" and post it here.
    Going back some versions, there was a great book on the Filters in Photoshop. About 1000 pages of nothing but using the Filters in that program, plus a vast number of free and for-pay Plug-ins. Very comprehensive and all in one spot. I still drag it out, though I'm probably 5 versions of PS away from it and the list of included Filters has expanded exponentially. Wish that I could find one for Premiere.
    PP does have one nice feature - the search at the top of the Effects Panel. Only problem is you need to know the name of the Effect you're looking for. F1 will help (no pun intended) there. Still, you need a Rosetta Stone to find out the one you "need," and what its official name is. Same problem often exists with the tutorials. If you know which Effect you will need, or the name of the result, i.e. "Picture in Picture," you can search for that. If all you know is what you want to accomplish, but not what it is named, not so often. Still, watching a tutorial that does not address your immediate need, will still provide you with great info that you can likely use later.
    "Classroom in a Book," is a good start (as are the tutorials around) on the Tool names and uses, plus many of the Effects. It's a bit sparse in the "why," but strong on the "doing." Since NLE is a lot of "art," the "why" is important to me, and overshadows the "doing." Sometimes, the exercises do connect-the-dots a bit better, on the why end of things.
    Some day, I hope to have used every Efect with every variation, and actually remember what each one did, and why I used it. Not likely until CS50 though.
    I also strongly recommend spending a few days with these forums, just reading. Do not skip the previous versions, even if you have only worked in CS3. A lot of the answers apply (some with modifications, but others more directly) to later versions, especially when looking for the choice of Effects, and tailoring them to your needs. Do not forget to use the "First," and "More" links on the forum pages, as there are often many pages of responses. This will also get you up to speed on the naming conventions used. When someone calls the Transition, "Fade to Black," someone else will point out that in PP, it's "Dip to Black."
    I had it easier than most, 'cause I came from a cinematography background, with many years using Photoshop for advertising print output. Still, I found that I needed a good glossary of NLE terminology, as I discovered that the language had changed, or was just different. Gotta' learn something new every day of your life.
    Hunt

  • Standard report which can show the  details of Invoice value and PO value

    Hi all,
    Is there any  standard report which can show the  details of Invoice value  is more than 5% of PO value. MIRO value and PO value.
    If any report which caters the maximum requirement is also fine
    Regards
    Sanjith
    Edited by: Sanjith Sethu Lekha on Dec 6, 2011 2:42 PM

    Hi
    Please refer the below mentioned link
    /thread/1789934 [original link is broken]
    Regards
    Praveen P C

  • PO reporting that can capture PO number, PO value and cost center

    Dear SAP expert and gurus,
    Would like to seek for your professional advise and consult on which report in MM that can capture the PO number, PO value and cost center.
    Kindly advise.
    Thank you
    Regards
    Leonard Tan

    ME80FN is a good report that captured the PO number and amount. However, the cost center is not being captured here. is there any suggestion?
    ME2K is not an ideal report to user cause, user requires the data to be shown in one line instead of 2 to 3 line.
    Is there any report like ME80FN can be captured PO number, PO value and Cost Center.
    Thank you
    Regards
    Leonard Tan

  • Report that can display the installation date of an application or program

    Hi,
    Would like to ask if anyone knows a built-in report in SCCM 2012 that can display the installation date of an application or program, either it was through deployment with SCCM or through manual installation?
    Thanks in advance!

    Got this to give me the report that I wanted but eliminating some entry on the SQL Query that
    Peter van der Woude gave. Here's the Query I used to display the computer name, name of software, date of installation and day since installation of the software.
    SELECT TOP (100) PERCENT
    dbo.v_R_System.Name0,
    dbo.v_GS_ADD_REMOVE_PROGRAMS.DisplayName0,
    dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0,
    DATEDIFF(Day, CONVERT(date,dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0), GETDATE()) AS [days since installed]
    FROM
    dbo.v_R_System INNER JOIN
    dbo.v_GS_ADD_REMOVE_PROGRAMS ON
    dbo.v_R_System.ResourceID = dbo.v_GS_ADD_REMOVE_PROGRAMS.ResourceID
    WHERE
    (SELECT ISDATE(dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0)) = 1
    GROUP BY
    dbo.v_R_System.Name0,
    dbo.v_GS_ADD_REMOVE_PROGRAMS.DisplayName0,
    dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0,
    DATEDIFF(Day, CONVERT(date,dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0), GETDATE())
    Thanks
    Peter van der Woude!

  • Find software that can show last time that device ...

    Hi
    Can you guide me to find a software for nokia n95 than can show to me the last time  that my mobile was charged full  or last Time that i disconnected my charger from my device ?
    are there any one that know any software or related software to help me ?
    Solved!
    Go to Solution.

    http://www.symbian-freeware.com/download-batteryli​fe.html
    --------------------------------------------------​​-------------------------------------------------​-​------------------------------------------------​--​--If you find this helpful, pl. hit the White Star in Green Box...

  • How to write SQL in crystal report that can reuse SQL execution plan cache?

    I write the following SQL with crystal report parameter fields, and it is connecting to SQL 2005
    Select Name from Customer where CustID = '{?CustID}'
    The SQL profiler show that It is an ad-hoc query, how to write parameterized SQL which can reuse Execution Plan.
    Edited by: Chan Yue Wah on May 14, 2009 3:17 AM

    Since there are too many report, it is not possible rewrite all. Is that crystal report do not have option to change how it query the database ?

  • How i can define network printer to report that can use it

    hi all
    i want to define network printer to the report
    and the format of the printer full name and its port ?
    another question
    when i use the local printer it print but there are web opened and contain uncertain
    letters
    i want this web to be closed

    Hi John
    Thanks for replying,
    My current setup is this, my non apple router is accessed wirelessly by all my computers, ie imac, mac mini and macbook pro, ipad & iphones for internet.
    My printer is in another room so therefore I cannot connect the AEBS (airport extreme base station) with an ethernet cable (I have intially in order to update the firmware and other updates) so in following the attached guidelines are you saying that I have to have the AEBS connected with the ethernet cable to the router?
    I was hoping to wirelessly connect.
    The wish is that all my devices can print wirelessly
    What has happened though is that I can access the AEBS wirelessly, but it has disabled me from my router so I cannot connect to the internet neither to that network
    Any other advice
    Thanks
    Regards

  • Displaying a note in an area in the report that can be considered common

    Hi,
    All my KF fields are amounts in INR (Indian Rupees). Is there some way to show that 'all amounts are in INR' in a common place in the report instead of displaying the same in the header of every column
    Edited by: Sanjeev Koganti on Jan 2, 2008 9:51 AM

    Hi Jr,
    Thanks for telling me about the display of scaling factors in the query properties. That reduces work in adding the unit to the description of every KF
    I actually wanted to know if there was way to display 'All amounts are in INR' somewhere in the report since all the KFs are in INR units
    Edited by: Sanjeev Koganti on Jan 2, 2008 10:11 AM

  • Software inventory report and PC show different information

    Hi,
    The scenario is the following:
    SCCM 2012 R2.
    Clients with windows 8.
    The report "Software registered in Add Remove Programs on a specific computer" and "Programs and Features" show different information.
    Programs and features screenshot(ordered by name):
    Report screenshot (ordered by name):
    The question is:
    Is the above normal behavior?
    if not
    How to get in the report "Software registered in Add Remove Programs on a specific computer" all of the software listed in "Programs and Features"?
    Thanks in advance!

    Take a look at that device in Resource Explorer.  Notice that on a 64-bit device there is an 'Installed Applications' class and and 'Installed Applications (64)' class.  This data comes from the registry, and on a 64-bit operating system there
    are actually two separate 'Add/Remove Programs' lists that are aggregated in the OS user interface.
    If in Resource Explorer you see all of the software you expect to see, but not in the report, it is likely because the report is only looking at the 'Installed Applications' class and and not 'Installed Applications (64)' class.
    If you enable the 'Installed Software' class (either by going into the client settings or the AI node), you will notice that the 'Installed Software' class is a combined version of both the 32-bit and 64-bit applications.  This is much easier to report
    off of.
    I hope that helps, 
    Nash
    Nash Pherson, Senior Systems Consultant
    Now Micro -
    My Blog Posts
    If you've found a bug or want the product worked differently,
    share your feedback.
    <-- If this post was helpful, please click "Vote as Helpful".

  • Reports that can be outputted from the system

    Hello,
    Does IMS5.2 provide any tool to generate reports with indicators like :
    � Activity logs, with statistics by account.
    � Login and failed login attempts.
    � Account activity/inactivity by period.
    � Active users trace.
    or i need to use a third-party tool to obtain this indicators?
    Many thanks in advance

    Look in the console or server log from the ALDSP server to verify that this message is coming from the ALDSP server.
    Seeing the stack trace would help.
    It sounds like either (1) you have not rebuilt/redeployed your DSP application on the ALDSP server (it's possible to develop new data services in Workshop and execute them in the Test View without rebuilding. But it's not possible to use the 'submit' function because the compiled xmlbean classes are required.
    First thing you want to do is test the SDO Update/submit in the Test View - so pick any function in that data service, run it in the test view, and click on 'Edit'. Now change something, and click on submit. Did it work? I'm guessing you get the same error message that you saw via service bus. Try rebuilding and redeploying your ALDSP application (make sure it redeploys successfully by messages in the log file). YOu should have the ALDSP logging set to 'Debug' for your application, and also set the WLS logging to Debug so you can see the ALDSP messages.
    Btw - you will have the same issue in ALSB 'Debug' as you had when you tried to use the submit function via the JWS Test page. You won't have a DataGraph unless you create one manually.
    Other thing - why don't you open a case with customer support so that you have 24/7 help instead of only help when I check this forum?

Maybe you are looking for