Inventory Reports are not executing in Quality Server

Hi All,
I have done two reports  ( 1. Stock Overview & 2. Stock Ageing ) in BW-DEV and executed successfully but after moving transports to BW-QA, I am getting Zero values for Stock Overview & for Stock Ageing, I am getting errors like "Sub Routine Call failed, Could not find the form SET-ICFL, CY_SY_DYN_CALL_ILLEGAL_FORM & UNCAUGHT_EXCEPTION.
This is for your kind Information:
1.  I uploaded data properly to Inventory ZIC_C03
2. I verified data in Cube, the data is available
3. SAP BI 7.1
Please guide me to over come the above issues.
Thanks
Sreeni
Edited by: sreenivasulu.gandi on Jan 24, 2012 5:48 PM

Hi,
It looks you are not in developer role so it is asking access code. If you want access code you can ask Basis team they will provide based on the policies.
Regd your issue are you getting this error for particular report or any report? Check RFC connection between Bex and BI server. You run the same report in using RRMX or RSRT, if you are able to see the output then ask your Basis team look this issue or check the Note 1600067.
Thanks
Riyez

Similar Messages

  • Inventory reports are not giving output while executing in rsrt

    Hi,
    I am running inventory reports in RSRT. But for every report when i run, a debugger comes and its not showing any output. And the break-point in it is a standard one. so atleast standard reports must execute, but they are not giving me any output.
    Please tell me what can i do to resolve the error.
    Roma

    Hi Roma,
    Just press F8 key and keep executing report .
    Usually Bex Show this when either there is some problem with Report or Some variables you have  used in query  or you have not sufficient memory .
    Run the report and you will definately get some ides.
    key F6 to go to next line of execution
    key F8 to go to next breakpoint .
    Regards,
    Jaya Tiwari

  • Changes are not reflecting in Quality server

    Dear All,
    We have recently installed the Portal 7.4 servers.
    Currently we are having two servers Development and Quality.We have Configured NWDI using CMS and created tracks(Defined run-time systems as Development and Consolidation)  we are able to checkin the activities at NWDS , when we are selecting the component in the consolidation and on  click of  import we are getting the message as import finished, but the changes are not reflecting at the Quality server. i.e in earlier 7.01 version when we imported , the ear was deployed automatically in quality but it is not getting deployed in the new version 7.4
    Regards,
    Ramana.

    Dear Ervin/Jun Wu,
    Thanks for the Responce.
    As per the given link the track is configured  with out any issues (When we are clicking on Deployment in the Transport studio it is opening new tab like below and we are not having any errors when we click on Start deployment nothing is happening)
    http://hostname:50000/webdynpro/dispatcher/sap.com/tc~SL~CMS~WebUI/Deployer?BS=EPD_PRTADEV_C
    Please check the below log regarding deployment when we do the import
    SDM-deployment-notification  Log file.
    20141028125231 Info :Starting Step SDM-deployment-notification at 2014-10-28 12:52:31.0994 +5:00
    20141028125231 Info :Deployment is performed asynchronously.
    20141028125231 Info :Following DCs are marked for deployment (buildspace = EPD_PRTADEV_C):
    20141028125231 Info :
    20141028125231 Info :RequestId: 152
    20141028125231 Info :==> no resulting DCs for deployment
    20141028125231 Info :Follow-up requests:
    20141028125231 Info :
    20141028125231 Info :
    20141028125231 Info :Step SDM-deployment-notification ended with result 'success' at 2014-10-28 12:52:31.0995 +5:00
    Regards,
    Ramana.

  • Headins are not displaying in Quality Server

    Hi Friends,
    1. iam develpoed one report it is displaying output in 210 sever when i moved it to quality sever, it is not displaying output headings like sales order, customer,approved..., it displaying remaining data except headings....why it happens like this.
    2. Same report it is displaying o/p  two entries for input date like 11.10.2006. when i excuted custom table here i gave input same date 11.10.2006 this table is displaying 20 entries ....why it happens like this...Plz give me exact solution for this two problems .these are V.V.urgent issues.
    Thanks in advance.
    Hiddu.

    Hello,
    The header problem occurs probably because the translation of the fields, open your report go to the menu Utilities -> Translation and translate the header fields.
    Regards.

  • Some Crystal Reports are not using the Cache Server

    Hi...we are currently running BOE XI R2 SP2.  I setup a server group with a Cache Server and a Page Server.  In the CMC, I set this cache server to keep reports cached for 15 minutes.  On the Process tab of some reports, I specifically set the report to use this new server group.  On some of the reports this works as expected.  For others, it does not appear to be since the cache folder's Date Modified date does not change.  So far the only similarity between the reports that do not use cache is that these reports have sub-reports.  Has anyone experienced this before?  If so, how did you resolve it? 
    Thanks!

    Hi Rich,
    the connectivity on the Designer an don the BusinessObjects system is identical. Is region the only characteristic being used in the report ? which connectivity did you use in Crystal Reports ?
    ingo

  • Report Alerts are not shown on crystal server 2011

    Hi,
    I have created alerts on From date and To Date. The alert is shown when the difference between From Date and To Date is more than an year. It is shown properly in the crystal report designer. When I am uploading the same report to the server the alerts are not shown on the server.
    Can someone help me with the same.
    Thanks,
    Simran

    Hi Jawahar,
    I have uploaded the report in CMC using Add--> Local Document.
    For Alerts I have checked the Box 'Enable Alert'. Still I am not getting a Pop Up which I get in the crystal report designer. Is the Alert sent on Crystal Server by email? I have currently selected default setting in Configure Alert Notification.
    Regards,
    Simran

  • 11.1.2- Need to find out what reports are being executed by a user

    Hi,
    We have financial reports executed from workspace.In essbase session , only the user id is displayed and the Request type- mdxreport is displayed. We also tried searching the log for Financial report didnt find anything relevant.
    Is there a way to find out what reports are being executed by the user.
    Thanks in advance.
    Regards,
    Saumya

    STAT will give you the information for a limited period of time and is limited to the server which you are logged onto yourself. Beyond 24 hours it is of even less use even if you change the selection screen values.
    If you want it for a period way back into the past, then you need to use ST03N.
    There are at least 2 dependencies and 1 confusion:
    1 dependency) The length of period is determined by the size (length) of the file. You can change this in ST03N (default 50MB) via the menu settings.
    2 dependency) The stat collector jobs need to be scheduled to write the information to ST03N (once per hour is a legal requirement in some non-banana republic countries).
    1 confusion) There is an obscure function which converts a report submit to a transaction name (there is not much difference anyway) and an even more obsure one which filters what ST03N will record and therefore whether you can read it. You can (un)filter these things away if you search the SAP Marketplace for the term "MONI".
    What is of particular value from this control is that you can even detect a submission of an abap which only existed temporarily.
    Also note that having this information is potentially very powerfull with respect to the users (some of them are human too), so you should expose and use it responsibly.
    You should also ensure that only responsible users / auditors have access to S_TOOLS_EX.

  • Reports are not called from form in browser plz help

    Hi,
    I have installed 9iAS+8.1.7 database on the same machine with NT4 server.My system's forms(.fmx) are running well but my reports are not running from my main form.i call reports from the
    from as,
    Run_Product(reports,'..\iReports\xglrxx12.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);
    Actually want to know the report's setting when calling from the from in a browser(environment variables,virtual paths etc.).
    My database is installed in drive E:\8idb_home\ and 9iAS is on
    G:\9iAS_home\.My systems .fmx & .rep files are in "iforms" and "ireports" folder respectively.
    Plz help!
    Many thanks!

    Hi,
    First of all thanks to Vincent Botteman for solving the prob.
    Yes when i changed my call of run_product by excluding the path i have specified when calling from form it then makes a result.
    Also specified the entry of your reports .rep files by giving path in reports60_path registery variable as,
    Run regedit-->Hkey_Local_Machine-->Software-->Oracle here give the full path of your .rep files as an first entry in reports60_path variable.And finally not mention the path when calling reports from form as,
    Run_Product(reports,'xglrxx13.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);<--- Correct way.
    Run_Product(reports,'..\iReports\xglrxx13.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);<--- Wrong way.
    Regards!

  • Reports are not posting with report repository webserver configured for Sin

    Hi Everyone,
    We have configured Single Signon on our Test environment (UADB1) using Sun Authentication Manager. Everything went well, we can login using our LDAP accounts except for one thing. The reports are not posting to the report repository.
    Our setup goes like this. We have used only one webserver for login and for report repository purposes. SSL certificate was configured in the webserver and we are using https in the report node. Both URLs https://dv001.test.com:8450 and http://dv001.test.com:8400 were configured for Single Signon.
    Report Node Definition
    Node Name: uadb1
    URL: https://dv001.test.com:8450/psreports/uadb1
    Connection Information
    https
    URI Port: 8450
    URI Host: dv001.test.com
    URI Resource: SchedulerTransfer/uadb1
    Below is the error I am getting. If I will use another webserver which is not the Single Signon configured as report repository the reports are posting. So, I am thinking this has something to do with the Single Signon setup and SSL. ANy idea? Thanks.
    PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) 1. Process Instance: 9499/Report Id: 8465/Descr: Process Scheduler System Purge
    PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) from directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_9499
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) (JNIUTIL): Java exception thrown: java.net.SocketException: Unexpected end of file from server
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) HTTP transfer error.
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) Post Report Elapsed Time: 0.2300
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) =================================Error===============================
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) Unable to post report/log file for Process Instance: 9499, Report Id: 8465
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Process Name: PRCSYSPURGE, Type: Application Engine
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Description: Process Scheduler System Purge
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_94

    Duplicated thread : Reports not posting if using Single Signon webserver as report repo
    Nicolas.

  • Reports are not able to run coz of Block Corruption

    Hi all,
    I have reported some Oracle finance reports are not running.
    Once i got the call i looked into the user trace file, there i found the below :
    Corrupt block dba: 0x2100f345 file=33. blocknum=62277. found during buffer read
    on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
    Entire contents of block is zero - block never written
    Reread of block=2100f345 file=33. blocknum=62277. found same corupted data
    table scan: segment: file# 15 block# 84
    skipping corrupt block file# 33 block# 62277
    Corrupt block dba: 0x2100f346 file=33. blocknum=62278. found during buffer read
    on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
    Entire contents of block is zero - block never written
    Reread of block=2100f346 file=33. blocknum=62278. found same corupted data
    table scan: segment: file# 15 block# 84
    skipping corrupt block file# 33 block# 62278
    Then i try to find out which table is affected by the below queary :
    SQL> select segment_type,owner,segment_name from dba_extents where file_id=33 and 62278 between block_id and block_idblocks -1;+
    SEGMENT_TYPE      OWNER
    SEGMENT_NAME
    TABLE             GL
    GL_JE_LINES
    So this above table GL_JE_LINES is the affected table is init.
    Now what is the action i have to take. In this database there is no archive log enabled and version of this database is 7.
    Can any one sugges me what is the action i have to take now.
    Regards
    Hamid

    DB version :
    SQL> select * from v$version;
    BANNER
    Oracle7 Server Release 7.3.4.3.0 - Production
    PL/SQL Release 2.3.4.3.0 - Production
    CORE Version 3.5.4.0.0 - Production
    TNS for IBM/AIX RISC System/6000: Version 2.3.4.0.0 - Production
    NLSRTL Version 3.2.4.0.0 - Production
    Alert log :
    SID>tail -f alert_SID.log
    Tue Sep 25 14:35:03 2012
    Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
    Tue Sep 25 14:35:03 2012
    Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
    Tue Sep 25 14:35:03 2012
    Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
    Tue Sep 25 15:09:18 2012
    create tablespace tbs datafile '/stage/software/APRD/oradata/tbsnew.dbf' size 10                                                                             0m
    Tue Sep 25 15:09:27 2012
    Completed: create tablespace tbs datafile '/stage/software/AP...
    Trace file :
    SID>tail -f ora_84426_aprd.trc
    on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
    Entire contents of block is zero - block never written
    Reread of block=2101d366 file=33. blocknum=119654. found same corupted data
    table scan: segment: file# 15 block# 84
    skipping corrupt block file# 33 block# 119654
    Corrupt block dba: 0x2101d367 file=33. blocknum=119655. found during buffer read
    on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
    Entire contents of block is zero - block never written
    Reread of block=2101d367 file=33. blocknum=119655. found same corupted
    For this above :
    SQL> select segment_type,owner,segment_name from dba_extents where file_id=33 and 119654 between block_id and block_id+blocks -1;
    SEGMENT_TYPE      OWNER
    SEGMENT_NAME
    TABLE             GL
    GL_JE_LINES
    Regards
    Hamid

  • Reports are not run in WAN using OAS10g R2 on MS Server2003? urgent help

    My Forms and Reports was run successfully using Oracle AS10gR2 installing on Win XP on Server in my LAN and WAN environment. So every thing is working fine using Win XP on my server Machine.
    But when I install MS Server 2003 and Oracle AS10gR2 on my server machine. Forms and reports are run successfully in LAN but in WAN forms are run successfully and reports are not running?
    Please send me the solution on urgent.
    Thanks.
    Shahzad

    Hi Paul,
    We recently upgraded our SCCM 2012 R2 servers to OS 2012 R2, Now i could not able to see the path you mention in your blog.
    mofcomp.exe “C:\Program
    Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof”
    Bear in mind that the above command is for SQL Server 2008 and it assumes that SQL is installed in its default location.
    The command for SQL Server 2012 is:
    mofcomp.exe “C:\Program
    Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”
    I can only see D:\Program Files (x86)\Microsoft SQL Server\100\<Below
    folders>
    DTS
    SDK
    Tools
    srkr

  • Posting Document Not Created in Quality Server

    Dear All,
                        My HR-FI Posting document is not created in quality server.
    Whem am running the PC_M99_CIPE  transaction and  run simulation run after that it giving me the message no document is created .
    And also am not able to see the log in quality server.
    All the things is working in the development server but not in quality server.
    I checked the obye,and obyg all things is been fine .
    Kindly help to sort the problem.
    Thanks
    Sandeep

    Dear Sandeep,
    First make the control record status Exit payroll PA03.
    Goto "Posting to Acc : Create posting run" screen.
    Fill period, payroll area, personnel number fields as requested.
    type of doc created write P - live posting run.
    Select output log & Run.
    Click "Doc overview" button.Select the document and click "Release document" button - F9.
    Say "Yes".
    Go back.
    Press "Posting tun overview" button.
    Select the last posting.
    Click post documents button.
    Say "Immediately".
    This procedure should work.
    If not, you may lack some authorization objects.
    Go and check whether the doc is posted via transaction FB03.
    All the best,
    Dilek
    Edited by: Dilek Ersoz on Nov 9, 2009 1:34 PM

  • Some reports are not displayed -- JInitiator 1.3.17 to JRE 1.6.43

    We have our Medical Suite developed using Oracle Forms 10gR1(9.0.4) version.As we came to know that JInitiator is no more supported from Oracle and it has many problems Windows 7 64 bit esp.., with IE (9.0) recently we have migrated the Client PC's from JInitiator 1.3.17 to JRE 1.6.43.
    Unfortunately when we print the reports, some of the reports are being displayed and the other reports are not being displayed ( No action upon on clicking print button).
    But when we revert back to JInitiator all the reports are working fine without any change in IE configuration. So can someone give me the probable cause for this behaviour.
    Edited by: Chaitu on Mar 17, 2013 8:57 AM

    Chaitu wrote:
    If the parameter are written in multiple lines using concatenation then there is no problem, but some places we made the DESTYPE OR CACHE OR DESFORMAT in different lines and it is working fine when we used Jinitiator 1.3.17.
    Once we changed to JRE, it stopped working maybe because the command cannot be issued to browser since it is incomplete.
    Is 10.1.2.3 a stand alone patchset given by Oracle for migrating 10g R1 to 10g R2 or there are some other patches given before this patchset(10.1.2.3).
    I am asking this because most of the times, Oracle releases a patch in sequential order and they should be installed in the same order.
    For example In order to install Enterprise Manager 10g Grid Control Release 5 (10.2.0.5), we must have 10.2.0.1.0 (10.2.0.2.0 for Windows) release up and running. So I was not sure whether this patch can be installed alone without any other combinations directly. Please enlighten me if you can.
    Hi Chaitu,
    patchset(10.1.2.3) is applicable for the following releases only:
    Oracle Application Server 10g Release 2 (10.1.2.0.0)
    Oracle Application Server 10g Release 2 Standard Edition One (10.1.2.0.1)
    Oracle Application Server 10g Release 2 (10.1.2.0.2)
    Oracle Application Server Forms and Reports Services (10.1.2.0.2)
    Oracle Application Server Portal 10g Release 2 (10.1.4)
    Oracle Application Server Portal 10g Release 2 Patch Set 2 (10.1.4.1)
    Oracle Developer Suite 10g (10.1.2.0.2)
    Oracle Business Intelligence 10g Release 2 (10.1.2)
    Oracle Business Intelligence 10g Release 2 (10.1.2.0.2)
    Oracle Business Intelligence Tools 10g Release 2 (10.1.2)
    Oracle Business Intelligence Tools 10g Release 2 (10.1.2.0.2)
    Oracle Business Intelligence Tools 10g (10.1.2.0.2) that shipped as part of Oracle Developer Suite 10g Release 2 (10.1.2)
    OracleAS 10g Release 2 Patch Set 1 (10.1.2.1.0)
    OracleAS 10g Release 2 Patch Set 2 (10.1.2.2.0)
    Hope this helps
    Hamid
    * batter discuss at {forum:id=82} forum.

  • Oracle 9iAS R2 - reports are not working  - JSP Error

    dear All
    We are having issue in our Oracle 9i AS R2, the reports are not working, this thing happend suddenly , while runing any report the following messages are coming
    ==============
    500 Internal Server Error
    OracleJSP:
    JSP Error:
    Request URI:/repdemo/examples/Tools/test.jsp
    Exception:
    org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
         at com.inprise.vbroker.ProtocolEngine.PortfolioImpl.getConnector(PortfolioImpl.java:79)
         at com.inprise.vbroker.ProtocolEngine.ManagerImpl.getConnector(ManagerImpl.java:147)
         at com.inprise.vbroker.orb.DelegateImpl._bind(DelegateImpl.java:196)
         at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(DelegateImpl.java:365)
         at com.inprise.vbroker.orb.DelegateImpl.is_local(DelegateImpl.java:493)
         at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java:356)
         at oracle.reports.engine._EngineReportStub.doneReport(_EngineReportStub.java:36)
         at oracle.reports.definition.RWJspProxy.doneReport(RWJspProxy.java:261)
         at oracle.reports.definition.RWReport.done(RWReport.java:1087)
         at oracle.reports.jsp.ReportTag.release(ReportTag.java:398)
         at oracle.jsp.runtime.OracleJspRuntime.releaseTagHandler0(OracleJspRuntime.java:1109)
         at oracle.jsp.runtime.OracleJspRuntime.extraHandlePCFinally(OracleJspRuntime.java:1213)
         at examples.tools._test._jspService(_test.java:292)
         [SRC:/examples/Tools/test.jsp]
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
         at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
    -=================
    please help to resolve this issue.
    thanks in advance.
    regards

    Dear All
    Just to share the solution of the problem.
    We restarted the XServer which is on the other machine then Oracle 9i AS Middle Tiere and Infra. Once we restarted the XServer machine, and restarted the reports server , every thing back to normal.
    regards

  • Interactive reports do not execute with Z business role

    Hi all,
    We have created interactive reports which are working fine and displaying results with a standard business role. However, the report does not even execute when we use a custom business role - no blank screen no error, but the report does not execute at all.
    What could be missing ? Need your inputs please.
    Regards.

    Compare the profile value for the function profile id REPORTING_PROF in Z business role with your std business role. To check this go to define business roles> select your ZBusiness role>double click on Assign function profiles.
    Hope this helps!
    Regards,
    Kumar

Maybe you are looking for