Inventorycollection ENTITY_Mib:device sensed but collection failed

Dears,
It appears in LMS 4.2, Inventory Collection, is trying to query some POE MIB or MIB entries that older devices don't support.
This makes devices fail saying: 'device sensed but collection failed'
My biggest issue is that RME categorically bins all device data already collected, making the device disappear from inventory reports.
Rather than test if a mib is supported it just assume it is there. !!!!??? (what about some backward compatibility?)
BugId CSCub09829 describes the issue:
I was able to fix the issue for some older 3750's with package LibInventory ver 3.6.1, but I have several other 'older' device types giving me the same type of error.
Anyone else seeing this?
Anyone got a solution from cisco?
Cheers,
Michel

I heard noises that a fix will be available in LMS 4.2.2.
I really wonder how this got through QA in first place.
Cheers,
Michel

Similar Messages

Device sensed, but collection failed

Attempting to gather the inventory information for a couple of Cisco Catalyst 2950G 48 EI Switches. Ciscoworks had problem gathering information from one of my switches. I checked if there's any differences in configuration, routing, or IOS versions. No differences except for management IP address.
Inventory collection job reported "Device sensed, but collection failed".
Attached is the IC_Server.log for the attempted job.

Hi,
is there any patch or workaround for this problem?
Our customer can not upgrade the firmware on the devices.
Info about devices:
########DEVICE1################################
WS-C4006 Software, Version NmpSW: 6.2(1)
Copyright (c) 1995-2001 by Cisco Systems, Inc.
NMP S/W compiled on Apr 11 2001, 18:10:53
GSP S/W compiled on Apr 11 2001, 15:57:20
System Bootstrap Version: 5.4(1)
Hardware Version: 1.2 Model: WS-C4006 Serial #: JAB044301U8
Mod Port Model      Serial #              Versions
1   2    WS-X4013   JAB044301U8          Hw : 1.2
                                         Gsp: 6.2(1.0)
                                         Nmp: 6.2(1)
2   48   WS-X4148-RJ JAE04251J18          Hw : 2.3
3   48   WS-X4148-RJ JAE0433029Y          Hw : 2.3
4   48   WS-X4148-RJ JAE043302M7          Hw : 2.3
########DEVICE2################################
Cisco Application Control Software (ACSW)
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2009, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
loader:    Version 12.2[120]
system:    Version A2(2.3) [build 3.0(0)A2(2.3)]
system image file: [LCP] disk0:c6ace-t1k9-mz.A2_2_3.bin
installed license: ACE-08G-LIC ACE-SEC-LIC-K9
Software
Thanks
Sandro

LMS4 Device sensed, but collection failed, Cat 4500

This is a WS-C4510R+E with a Sup 7-E running 03.02.02.SG enterprise.
I increased SNMP timeout to 10 seconds to no avail.
The IC_Server.log is attached. Any ideas?
-Jeff

Thanks for the Reply Vinod.
This is a 4510R+E with a Sup 7-E running IOS XE 3.2.2 SG. As far as I can tell this is based on IOS 15.0(2).
Upped timeout to 20 seconds, same results. IC_Server.log is attached.

Inventory collection fails for ACE module (RME 4.3.1)

I am trying to collect the inventory and ultimately the configurations for my ace modules. When i try to do an inventory collection I get the error
Device sensed, but collection failed
Anybody have any ideas?
Chris

Post your IC_Server.log.
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com

I am running Facetime version 1.0.3 (167) on MacBook Pro OSx 10.6.8 but Facetime fails to other Mac devices. What version of Facetime can I upgrade to in order to rectify this ?.

I am running Facetime version 1.0.3 (167) on MacBook Pro OSx 10.6.8 but Facetime fails to other Mac devices. What version of Facetime can I upgrade to in order to rectify this ?.

Unable to make or receive FaceTime calls after April 16, 2014

HT4623 why my device had "no service" even I already put my sim card..I have follow a few instruction from you tube how to solve this problem but all failed. Please help me .TQ

why my device had "no service" ..I have follow a few instruction from you tube how to solve this problem but all failed. Please help me .TQ

See if anything in this support document help http://support.apple.com/kb/ts4429

HT1414 i have tried to update my i.phn 3g from 4.1 to 4.2 but it failed and then i tried to restore then its also failed,,now my device is not working,,,can somebody help me?????

i have tried to update my i.phn 3g from 4.1 to 4.2 but it failed and then i tried to restore then its also failed,,now my device is not working,,,can somebody help me?????

No one can help you without knowing the error message and error number when it fails.

Data collection failing

LMS 4.1 W2k8 R2
I recently installed 17 stacks of 3560V2 switches at a site and added them to LMS4.1. What I have found is that data collection is failing for all but the top switch in the stack. In other workds, in some cabinets I may have 4 switches connected back to a 6500 core. Data collection succeeds for only the switch connected to the core. UT info is not collected for the switches that fail data collection.
If I go to the device status dashboard I see that I have data collection succeeding for 56 devices and failing for 96 devices. For the devices that fail some are listed as unreachable and others as never-reachable. In either case, the following is suggested as a resolution:
Verify the following :
1. Device is reachable using ping.
2. Verify that DCR is configured with correct credentials for the device.
These devices are reachable. Inventory collection is succeeding. If I test reachability in device center I get successes across the board - even for SSH, though no username is specified in DCR so I can't see how that works.
The 17 stacks I just installed are configured as clusters in those cabinets that have more than 1 switch. However, they are not managed as clusters by LMS. They all have IP addresses. I just use clustering to facilitate bouncing around a stack from a telnet command line.
I deleted one of these switches and re-added. Now ping, HTTP, SSHv1 & v2 succeed in device center - but everything else fails. When I run a credential verification job on this switch it reports SNMP read and write success, telnet & enable success, and SSH "no value to test". The credential verification results are as I would expect.
I am at a loss at this point. How do I troubleshoot the data collection issue?
-Jeff

I found the answer to my particular problem here:
Campus Manager and cluster-member switches

(lms3.2) Devices discovered but unreachable?

I recently installed lms3.2 to a newly installed cisco network. When I run device discovery, all my cisco devices are displayed as unreachable. What could be causing this issue?
Thanks in advance

Thanks for the reply,
I checked the snmp credentials and they match on both the lms platform and the switches. I could view and configure any devices in the chassis view.
Okay, I re-discovered my core router successfully, and the device as been added to RME devices. But, sys inventory polling and collection jobs are failing, what could cause this issue?
Rod

How do i wipe my old phone if it can no longer connect to the internet? I enter my passcode and apple id, but 'verification fails' as there is no internet connection???

how do i wipe my old phone if it can no longer connect to the internet? I enter my passcode and apple id, but 'verification fails' as there is no internet connection???

Hi, JTCW33.
Thank you for visiting Apple Support Communities.
If you still have possession of the iPhone you wish to wipe, here are a couple articles that will walk you through the process.
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5661
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
If you no longer have access to your device, it will need to be connected to the Internet in order to remote wipe the device.
iCloud: Erase your device
http://support.apple.com/kb/ph2701
Cheers,
Jason H.

I tried updating iTunes to version 11.1.1, but installation fails each time even when I did it manually as was suggested. The message I receive is: "The installer has encountered an unexpected error installing this package. This may indicate a problem"

I tried updating iTunes to version 11.1.1, but installation fails each time even when I did it manually as was suggested. The message I receive is: "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324."

Hi hongkongpom,
Just wanted to say that after posting the problem, I had a chat with an iTunes' Tech Support, her name is Rebekah. My problem was resolved after that. Will list the chat history below in hopes that it may help you as well.
Good luck!
Samia
Chat Transcript
Friday, October 4, 2013 05:55 AM
Duration: 81 minutes 28 seconds
Rebekah:
Welcome to AppleCare chat support. Please give me a moment to look over your information.
Rebekah:
Hi, Samia! My name is Rebekah. If we get disconnected, please chat us back. http://www.apple.com/support/ipod/contactEnter the case number from the initial email we sent you. This gives the next advisor you chat with immediate access to your case history.
Rebekah:
Could you please confirm your serial number? I want to be sure we provide the best service possible for you, Samia!
SAMIA:
Sure, it's 8L8395UY2C5
SAMIA:
My problem is with iTunes.
Rebekah:
Thanks for that confirmation. Just a heads up, this is iOS Tech Support. We do support iPod touches, iPads, and iPhones, but not the iPod classic. But no worries! I can get you in touch with a phone Advisor who can get you in touch with the department that specializes in iPod classics and would be able to better assist you. Would that be OK?
SAMIA:
I wasn't able to install the new version of iTunes (version 11.1.1). The installation keeps failing. The they suggested the I install it manually and that failed too. I will attach the message I received.
SAMIA:
I don't have a problem with iPod.
SAMIA:
Just iTunes
Rebekah:
No problem! We can certainly troubleshoot iTunes as much as possible. It may come to the point that you may have to transferred, but we can do as much as possible during this chat!
Rebekah:
Thanks for the screenshot. It is a bit small so I am unable to fully see the message that you are receiving. What is the error message you are receiving?
SAMIA:
This is the message I received in case you weren't able to open the attachment: "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324."
Rebekah:
Thanks for that info!
SAMIA:
Pleasure!
Rebekah:
What version of Windows (XP, Vista, 7) do you have?
SAMIA:
Windows 7
SAMIA:
Windows 7 Home Premium
Rebekah:
Thanks for that confirmation. I do apologize for the delay, Samia. I am researching this error code now. You mentioned trying to install iTunes manually. To be sure I am on the same page, what steps did you take to do that?
SAMIA:
Well when the indsatalltion failed I was given instructions to select Download Only from Tools and then install manually. When I did it, I window popped up with the following items: - AppleApplicationSupport
SAMIA:
- AppleMobileDeviceSupport64
SAMIA:
- Bonjour64
SAMIA:
iTunes64
SAMIA:
SetupAdmin
SAMIA:
I selected Repair in all of them instead of Remove and all worked but iTunes64
SAMIA:
That's when I received the message that I sent you earlier.
SAMIA:
By the way, this is the fir st time something like this occured. I never had problems with installation before.
Rebekah:
I completely understand what you're saying. Since that Repair did not resolve the issue, our best option is to uninstall iTunes and its components and redownload it. To do this, we will follow the steps in this article: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Rebekah:
First, we will want to quit iTunes and/or Apple Software Update if those are open at this time.
SAMIA:
Rebekah, the instructions you gave says, "For Windows XP, follow these steps to remove and reinstall iTunes and other software components for Windows XP."
SAMIA:
I closed all applications
SAMIA:
Also, my iTunes doesn't open anymore after the new failed installation.
Rebekah:
The section that says "For Windows XP…" is in case we opened up the wrong article, as we have the one for Windows Vista, 7, or 8. There is a link to click ("these steps") in those directions that would take us to the article for uninstalling on a Windows XP.
Rebekah:
So no worries! We have the right article!
Rebekah:
On the computer, we will want to click on Start > Control Panel. In Control Panel, we will click the "Uninstall a program" link.
SAMIA:
I thought so after doing a little exploration.
SAMIA:
done
Rebekah:
Alright, we'll want to select iTunes from the list of currently installed programs. Then we will click Uninstall. When asked if you would like to remove iTunes, let's click Yes.
Rebekah:
After the uninstallation is complete, we don't want to restart your computer if you're prompted.
SAMIA:
Done
Rebekah:
Then if you see other iTunes entries on the list, we'll want to remove them the same way.
Rebekah:
Then we will remove all instances of Apple Software Update the same way you removed iTunes.
SAMIA:
Okay, but do I have to remoce iCloud as well?
SAMIA:
Rebekah, I received the same error message again when uninstalling
Rebekah:
We actually do not need to remove iCloud. After the Apple Software Update, we will want to remove all instances of Apple Mobile Device Support
Rebekah:
How strange! Are you able to click past that and allow the process to continue or has it stopped it completely?
SAMIA:
I am unable to uninstall iTunes either
SAMIA:
Stopped completely
SAMIA:
I treied clicking Repair
Rebekah:
Alright, after trying the Repair option, let's see if it will allow us to continue uninstalling or not.
SAMIA:
I tried that but unfortunately, it isn't working. I still get that same message with error code 2324.
Rebekah:
This error code is not something that I am finding in my sources, Samia. So there is a chance that it is being caused with the Windows computer itself. However, I did find a link that may be able to help with uninstalling iTunes from Windows' support site: http://support.microsoft.com/mats/Program_Install_and_Uninstall
SAMIA:
Rebekah, you're a genius! It worked! iTunes is no longer there. What next?
Rebekah:
Awesome! I'm glad that worked!
Rebekah:
To be sure I am on the same page, what was the last component we uninstalled?
SAMIA:
iTunes
SAMIA:
Shall I remove the Apple Application Support, Apple Mobile Device Support, and Apple Software Update
Rebekah:
That is correct! However, we do want to uninstall it in the order I mentioned above. So Apple Software Update first, Apple Mobile Device Support next, and then Apple Mobile Device Support.
SAMIA:
Got it, but is the second one to uninstall Apple Mobile Device Support OR Apple pplication Support?
Rebekah:
The second one is Apple Mobile Device Support.
Rebekah:
The Application Support will be the last component we uninstall.
SAMIA:
Thanks! I'm on it.
SAMIA:
Done! ll 3 are gone, well 4 with iTunes. Now what?
Rebekah:
Awesome! Also, I just noticed that I accidentally typed Apple Mobile Device Support twice, I do apologize for any confusion! Now we will remove all instances of Bonjour and then remove all instances of Apple Application Support.
SAMIA:
There was only 1 instance with Bonjour. I don't know what the instances are for Apple Application Support
Rebekah:
Yes, Bonjour is often only listed once. Is the Apple Application Support listed at all?
SAMIA:
No
SAMIA:
Since I removed it
Rebekah:
Oh, perfect! If it was removed, we should be set!
Rebekah:
We have removed iTunes and its components now! From here, our next step is to restart the computer. Then once you reboot, you can redownload iTunes from apple.com/itunes
Rebekah:
That should allow you to download iTunes!
SAMIA:
Shall I downloaad the latest vesion?
Rebekah:
You will want to first restart the computer as shown in the article. That will ensure that this process goes smoothly and that everything was removed correctly! Then you can try downloading iTunes again.
SAMIA:
Okay, thanks Rebekah!
Rebekah:
You're very welcome! I'm glad I could help! And of course if you have any issue after the reboot and download, you can always chat us back, as chat is open 24 hours! You will just need to give your case number and the next Advisor would have all my notes!
SAMIA:
Thanks again for all your help, for I couldn't have managed with out it. Have a nice day!
Rebekah:
You're very welcome! I know how important iTunes is and I'm glad we could get you on a path to resolution!
Rebekah:
I hope you have a lovely day!
Rebekah:
It's been a pleasure speaking with you! Thanks for chatting with us Samia. If you don't have any more questions, select End Chat from the upper left corner of the chat window.
SAMIA:
Will do, thanks.

TS3694 itunes error (-42404) -- Okay, getting a little frustrated (but then again, who isn't a little frustrated?). I recently tried to upgrade iTunes software a few days ago but it failed. What is (-42404) error code mean?

itunes error (-42404) -- Okay, getting a little frustrated (but then again, who isn't a little frustrated?). I recently tried to upgrade iTunes software a few days ago but it failed. What is (-42404) error code mean?
I get the following:
(1) iTunes - The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? Yes/No
(2) iTunes - The software required for communicating with iPods and mobile phones could not be repaired. Please reinstall iTunes if you wish to use these devices. OK
(3) iTunes error message - A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404) OK
(4) iTunes error message - We could not complete your iTunes Store request. A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404) There is an error in the iTunes Store. Please try again later. OK
Okay, so I decided to uninstall and reinstall. Funny, iTunes can be found in a program folder, but it does not show up in the programs list. I tried to look for it using the command prompt ("wmic" --> "product get name") but iTunes is not there either. Doesn't even show up in the registry to try to uninstall.
I just want to "properly" uninstall and reinstall iTunes (plus the other usual suspects, Apple Software Update, Apple Mobile Device Support, Bonjour, & Apple Application Support). If anyone out there has any suggestions, please help! (I'm running Windows Vista -- don't judge/laugh) :-)

Okay, feeling like an idiot, but will share so others don't have to. I rebooted my computer and that enabled iTunes to reappear in the programs list. Don't appear to be having the same problems as before (no error messages now). Problem solved!

BlackBerry Desktop Software installs but then fails to open

Purchased BlackBerry today.
BlackBerry Desktop Software installs from distribution disc but then fails to open. Can see it in Windows Task Manager>Processes, as follows:
Windows Task Manager>Processes
Image Name: DesktopMge.exe CPU: 00 Mem Usage: 7,764 K
Windows Task Manager>Applications
Not listed!
I UNISTALLED previous installation of BlackBerry Desktop Software, including user settings.
Downloaded and installed the installation file for BlackBerry Desktop Software version 4.7, “470_b050_english.exe”, but with same result. Uninstalled it, too.
As suggest elsewhere in this forum, I made directory as follows: C:\INSTALL\Blackberry
Then extracted the downloaded installation file for BlackBerry Desktop Software version 4.7, “470_b050_english.exe”, into it.
Then started installation by clicking on “BlackBerrySetup.exe”.
However, the result is the same, as described above. BlackBerry Desktop Software installs but then fails to open.
Any help would be appreciated. I would like to make this software work.
Is there alternative software available?
Solved!
Go to Solution.

http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
HOWTO : use your blackberry as a USB device
and then install the Desktop Manager as administrator.
and use it as administrator too.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

How to create a Pooled VDI infrastructure using Win server 2012 as VM image?I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM

I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
Am I overlooking something? Should I need to prepare the image in a different way? (Sysprep differently?)
Thanks

Hi,
Thank you for your posting in Windows Server Forum.
Can you specify the error which you are facing during VDI setup for server 2012?
I might think that you need to check the memory setting for server 2012, as might happens that due to less memory you can’t setup the VDI setup properly.
Memory: If the Master VM is configured with static memory, it must have at least 1024 MB as startup RAM. If the Master VM is configured with dynamic memory, the maximum RAM must be at least 1024 MB.
Please check beneath article for information.
Windows
Server 2012 2,500-user pooled VDI deployment guide (Doc)
Single Image Management for Virtual Desktop Collections in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki

HP LJ M4555 MFP no Device Utilization Data Collection in Web Jetadmin 10.2.77156 (SR6)

Recently added three newer HP LaserJet M4555 MFPs to our Web Jetadmin Data Collection for reporting. The Data Collection for Accessory Inventory, Supply Utilization, Device Inventory and Event Log History all worked - they return a Collection Status of Collection Succeeded.
However the Device Utilization returns a Collection Status of Device Error (not very helpful).
We're using
Web Jetadmin 10.2.77156 (SR6)
I couldn't see anything flagged in this doco as to why it might not work:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01894187/c01894187.pdf
All three MFPs are
Firmware Datecode: 20121208
Firmware Revision: 2201057_231936
I couldn't see anything flagged in this doco as to why it might not work:
ftp://ftp.hp.com/pub/softlib/software12/COL38070/sj-114224-1/readme_ljM4555fw_2201057_231936.pdf
We have several older M4555 MFPs that we are collecting this data from successfully - I've tried to compare settings and can't see anything different standing out. They do have older firmware.
Firmware Datecode: 20110225
Firmware Revision: 2110187_149149
and
Firmware Datecode: 20111217
Firmware Revision: 2131305_192067
Any MFP with any of these firmware revisions report the data fine.
Does anyone know if there is a particular setting that is required to allow the Device Utilization Data Collection?
Or if there are any known incompatibilites with this firmware revision?

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Inventorycollection ENTITY_Mib:device sensed but collection failed

Similar Messages

Maybe you are looking for