Inverse Kinematics - stroke disappears after using Bone Tool...

Hi,
I'm trying to use Inverse Kinematics on a shape. I'm using a shape and when I use Bone Tool on one of the arms which is a shape, the stroke on it disappears on some machines while it doesn't on the others... (they're all iMac's).
I'm using the same Flash version on iMac's and the same file.
Here's the screenshot:

Positive. In fact, I decided to transform it before applying the bone tool this time and....same result. After applying the bone tool, any time I try to manipulate it, the bulk of it vanishes, but the bone tool joints remain.

Similar Messages

Image disappearance upon using crop tool.

Using photoshop elements 6 , OSX 10.5, image disappears after using crop tool.
Have reinstalled software, but no affect. Has anyone else had this problem?

Hi Barbara... I am wondering if I can still get a bit of help in this topic. I tried that, but the files you mentioned are not in my preferences folder in my library. I am running CS4 on OS X 10.9.5 with a 2.8GHz Intel Core 2 Duo processor and an NVIDIA GeForce 9400M 256 MB graphics card(s).in another forum it was mentioned to go to Preferences>Performance>Advanced Settings>Change the drawing mode to 'Basic', but that didn't work. Another said almost the same thing but to check off the Open GL tab... also didn't work... I am at a loss... Can you or anyone else for that matter, help?
Thanks!

Aperture 3 keeps crashing on me, consistently. More frequently after using Burn tool or skin smoothing - and even more often when I feather. What can I do? I already upgraded my RAM. I'm at a loss!

Aperture 3 keeps crashing on me, consistently. More frequently after using Burn tool or skin smoothing - and even more often when I feather. What can I do? I already upgraded my RAM. I'm at a loss!

4) When my computer crashes, once it starts again, it says "repairing" ... but I am not familiar with reparing permissions -- can you explain how I might do that?
If you are running OS X Lion, then you can restart your computer and then press and hold the 'Option' key immediately after you hear the start up 'gong' (usually heard when grey screen shows as it restarts).
You should see at least two Disks to choose from. Choose 'Recovery Disk' and wait for it to load, then choose 'Disk Utility' option in the Utilities dialog.
Once Disk Utility loads, do the following:
1 - In the left hand pane, choose your system partition (usually called either 'Macintosh HD' or 'Macintosh SSD'). Note - don't choose the actual hard drive listed above the partition when using Disk Utility in OS X Lion as this doesn't offer options for repairing due to it including the Recovery Disk you have loaded in memory.
2 - Click the 'First Aid' tab
3 - Click the 'Repair Disk Permissions' button in lower portion of main pane and allow to complete. Ideally, you will get a final message in main pane saying Disk Permissions are repaired.
4 - At lower right of same pane, click the 'Repair Disk' button and allow to complete. Ideally, you will get a final message indicating that Disk Repair is completed and all appears to be good.
5 - Quit Disk Utility > Close Utilities dialog window > Click 'Restart' button (confirm as needed).
You should boot straight into the system partition when complete.
Note - any red text in the main pane text while running the repairs will be issues and you will need to follow the advice given or post back.
If you are running Snow Leopard; then (as David mentions) boot from your first OS X reinstall disc and run the Disk Utility the same way; except you select the actual hard drive listed at top of left pane (not the partition below it). This is because Snow Leopard does not use a 'Recovery Disk' partition and repairs can be run on the HD or SSD itself.
Hope that helps.

Release strategy of contract disappeared after using of MEMASSCONTRACT

Hi All,
May be some one can help me?
I have next problem it tr. MEMASSCONTRACT(ECC6)
Release strategy of contract disappeared after using of tr. MEMASSCONTRACT. I know why it happened, but I don't know how to correct it. Some time ago IN ECC5 we added a field to a table EKKO and used this field as one of characteristics in the release strategy of contracts. In order to transfer value of this field to field CEKKO-USRC1 we used User Exit EXIT_SAPLEBND_002. This User Exit is suitable only for online transactions (ME31K, ME32K). How can I feel field CEKKO-USRC1 in transaction MEMASSCONTRACT?
Regards, Liza

Thank you. Probably I didn't explain my problem clearly. It's section of code from User Exit EXIT_SAPLEBND_002:
ATA: reference(20) TYPE c VALUE '(SAPMM06E)EKKO'.
DATA: it_ekko TYPE ekko.
FIELD-SYMBOLS: <ymm_icl> TYPE ANY.
e_cekko = i_cekko.
*THE "ICL Contract" FIELD IS ONLY RELEVENT IN THESE TRANSACTIONS
IF sy-tcode EQ 'ME31K' OR sy-tcode EQ 'ME32K'
OR sy-tcode EQ 'ME33K' .
ASSIGN (reference) TO <ymm_icl>.
it_ekko = <ymm_icl>.
e_cekko-usrc1 = it_ekko-ymm_icl.
ENDIF.
Program SAPMM06E can only be reffered while using online transactions. Mass transactions does not use these program and it is completely class based. So, may be someone know how can i do the same , but for tr. MASS in ECC6.

Why do the rulers (cmd R) disappear after using Print (cmd P) ?

Why do the rulers (cmd R) disappear after using Print (cmd P) ?

If you are referring to Pages v5.2.2 on Mavericks, or v5.5.1 on Yosemite — the rulers do not disappear in the Pages document when using the Print (cmd+P) keyboard shortcut. The document horizontal rules are temporarily obscurred by the drop down print dialog sheet.
I observe no evidence of disappearing rules unless they are forced via the cmd+R keyboard shortcut.

Thumbnails do not display after using rebuild tool

I am using OSX 10.7.5, and iPhoto 8.1.2.
recently I made a back up copy of my files.
I then reinstalled my operating system.
I then copied my iphoto library back onto my computer.
imported my iPhoto library into iPhoto
Pictures are in iPhoto.
Thumbnails do not display.
I have used the rebuild tools provided by iPhoto.
Still no thumbnails displaying.
any other ideas?

It relates to your suggestion in that, the reason I posted was to solve a thumbnail issue.
"re: Thumbnails do not display after using rebuild tool"
Terence suggested reloading my back up library.
I asked Terence where I should import to.
I was thinking that my thumbnail issue was related to the way I imported my back up.
You clarified where to import the library...
I tried it and I still have no thumbnails
I have already tried repairing permissions and rebuilding thumbnails using the i photo repair tool.
can you help me?

Fill after use pen tool

it is possible after using pen tool in path mode ifill the objetc i made with color ? I need the steps/ Thanks

Use the path selection tool to select the path. Then copy it: ctrl/cmd-C. Use the pen or shape tool to create a SHAPE layer. just make a small box or something to create the layer. Then press ctrl/cmd-V to paste your path into that shape layer. Select the small shape you made to create the layer and delete. it.

Music disappeared after using Syncios

Some tracks in the default Music app disappeared after using Syncios (http://www.syncios.com/) with my iPhone.
What I did:
I opened Syncios 4.1.1 with the iPhone 5 connected. Per the recommendation, I did not use iTunes at the same time.
Details:
Syncios 4.1.1
iPhone 5
iOS 8.0.2
Windows 7
Could someone please advise on how to recover the disappeared tracks and how to prevent this issue in the future?
I've also contacted Syncios support but in the meantime am wondering if anyone here can help.
Thanks!

I also wanted to note that the tracks that disappeared appear to have been downloaded from the cloud. So I can re-download those tracks, but if anyone knows how to prevent this issue in the future, your input would be much appreciated.

CS6 using bone tool - symbol fill disappears

Hi folks,
I am using the bone tool in CS6 (12.2.509) on an Intel Mac OSX 10.9.2 2.7GHz i5 12GB. The problem is demonstrated here:
During authoring, the symbol fills (eg. arm, leg) are disappearing over the duration of one or two frames in the sequence (say 45 frames). Driving me nuts. Questions:
Is this a known problem? Can't find anything on the forums.
Does anyone know when the Bone Tool will return for FlashCC
Is there a workaround apart from DragonBones?
Does anyone have some Valium?

Ok, I figured it out. I just need to select all symbols.

How to use bone tool without getting my vector/object distort?

Wish to get some help here. I drawn my human body figure using pen tool. I connect the bone tool directly without separating the part of (hand,legs and head) into symbol. After that, I try to move the hand but it get distort. Not just the hand but the body and head also getting distort as well. Do we need to necessary convert the body parts to symbol first before connecting the bone? Thanks.

> So, is it right if I say that the services available in the backend are already implemented? And just creating an endpoint for them would make them ready for use?
Yes: kind of instant services
> Also if I consume a service, say, 'CreateSalesOrder_In' for example, will it create entries in all my Sales order relevant tables (VBAK, VBAP) automatically using a BAPI internally?
The service has the task to do all necessary steps, whether with or without using a BAPI.
> Actually, I have these doubts because during my time at SAP Labs (for the composites team in BusinesByDesign), I used to create business objects in the ESR and create an implementation for the same in the backend using BOPF. But now, in the customer scenario, where a full fledged ECC implementation is used, I am unaware as to how the services would update the tables or even read the relevant data.
My consumer view on aservice is that I do not have to know how the service works, just need to know how to call it.
Regards, Boris

JPopupMenu won't disappear after using it!

I'm using a JPopupMenu on a JTable. When I rightclick on a line in my table, I display a dialogbox to make some selections which you can close by clicking an OK button. The problem is, that when I close the dialog box the JPopupMenu won't go away. More exact: Parts of it persist on the screen, but it is more like a background image, since it then is no longer functional (menu items are not highlighted etc.). Does anybody know a workaround to this problem why the pop up menu doesn't go away after using it?

Have you tried firepopupMenuCacelled() ??
This is a method of JPopupmenu that notifies listeners that it hacs been cancelled.... ??
Or maybe a mouse removed listener event to close the JPopupMenu... ??

Stage disappears when using selection tool

I'm using Photoshop CS6 Extended and i discover a strange problem in some documents that makes working impossible.
When i use the normal rectangle selection tool in some documents then suddenly all the content of the stage disappears when i release the mouse
It doesn't occur with any document just with some.
Does anyone has discovered the same issue and has an idea how to solve it?

Sorry, i meant canvas..."stage" was influenced by Flash
Posting a Screenshot makes no sense, because you just cant see no content anymore. All the panels are still there, but the canvas suddenly is empty in the moment i release the mouse when i'm using the selection tool.
I'm running Photoshop CS6 Extended on Windows 7 Professional 64Bit with 16GB RAM, 18GB of free disk space on an SSD.
It might be a working memory problem (?!). After closing Chrome (where i had a lot of tabs) and restarting the system, noe everything works fine. The problem is, that it happened a few times with different PSD-documents...

Lightroom 4.3 craches when using the brush after using redeye tool

I have purchased Lightroom couple of days ago. I was travelling therefore I didn't have the time to upgrade to 4.3.
The version shipped with the disk (4.1) was working like a dream. I have downloaded 4.3 yesterday and I couldn't be sadder. First I noticed that it cause the 'root' to use more CPU, meaning it doesn't use the CPU for Lightroom itself. Plus the the Application is generally and noticeably slower than original one.
Today, I used the redeye tool for the first time, and I just can't brush on top of it without having it crashes!! It's just impossible. I rebooted. Updated my Mac to OS 10.7.5 ... No use. I even uninstalled and reinstalled again. I was forced to do all my editing first in cluding usinf the brush, then use the redeye tool as the final step. But any moment I engage the brush after having used the red eye tool, it crashes instantaneously

I suppose so. But the thing is that 4.2 runs just fine.
But here you go:
Processor 2.53 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB
A bit oldish but I think it's fine (is that what you meant by set up? cuz I'm not entirely sure)
I used the CD to install the first version 4.1 and just followed the instructions and that's what I do every time there's an update/upgrade.
The catalog was suggested by the instructions to be put in the pictures file, so I did. and the images are there too. The other "technical" files that are related to how the software operates are located in the main Preferences folder (where all similar folders from other software are normally located"
Thank you so much for taking the time to look at it. Do let me know if you have any other questions
Cheers

AE crashes after using camera tool

Hi!
I currently have a major problem with my Adobe After Effects, my problem is that I seem to get a very annoying error when I use the Camera Tool after applying a CC Particle World (I have no idea if it's just the Camera Tool that isn't working or if it's the combination!)
The error is pretty much the same as the one in the thread I linked below, I read it but I do not get my answer, so maybe anyone could help me out? The rest of the package works fine!
http://forums.adobe.com/thread/660078?tstart=60
A picture of my actual error:
http://i42.tinypic.com/28u5zxd.jpg
Also, a picture from my dxdiag, if that helps
http://i39.tinypic.com/2vx4l1h.jpg
Videocard is an Nvidia GeForce GT 540M
Thanks in advance,
Casper

As for TimeRemapper's solution, this is how my screen looks like;
http://tinypic.com/r/sopguw/5
As for Rick Gerard's solution, this is how my screen looks like.
http://tinypic.com/r/2z3uo20/5
To me it looks like it's both disabled :/
Note: I did not roll-back my drivers yet!

HD icon disappeared after using Front Row

I'm using my wife's laptop, and for the first time (I'm guessing) we launched Front Row. I exited the program almost immediately, and found the the internal drive icon is missing from the Finder (including the sidebar)
I have tried using
SetFile -a V /
SetFile -a V /Volumes/Macintosh\ HD
I've tried deleting Finder prefs, although the problem occurs in all accounts. (including root)
I logged out, and back in after every attempt.
The only way I can view the icon is by setting Finder to view all invisible files.
This is on a MBP 2.4ghz, 10.5.1

Thank you, I think there was a combination of issues for me.
The first was a strange error when I was trying SetFile as an administrator, I got a -5000 error, and a -43.
Even when I had enableb the root user account, and was su, I guess I was using the 'V', not v. The man page documentation, and the --help for SetFile wasn't very helpful.
Now, for why it may have become invisible. I did do one other thing to the drive, but it certainly didn't cause it to disappear right away.
I removed some Spotlight comments that seemed like garbage to me, it was a series of numbers, such as: XXXX-XXXX
That may have been what started my problem, not Front Row.
Excellent page on invisible files, btw! Thanks!!

Inverse Kinematics - stroke disappears after using Bone Tool...

Similar Messages

Maybe you are looking for