Inverse Selection issue

Everytime I use the pen tool and then convert to selection from the path, it automatically inverses it.
Also when I try to fill the path, it fills the inverse as well.
Anyone know what might be causing this?

You have the Pen tool set to draw inverse paths, check the Options bar and make sure that it's set to Add to path area:
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7395a.h tml

Similar Messages

Menu selection issues in Flash CS4 for Mac

I'm having a few menu selection issues in Flash. It seems some fields are de-selecting automatically (and quickly). For instance:
1) When I double-click a layer to change it's name, it highlights then immediately de-selects. I can only rename by right-clicking and bringing up the Properties dialog.
2) Fields highlight briefly then immediately de-select in the Properties menu when using the Tab button to advance or cycle thru fields. I have to click on each field individually to enter dimensions/characters.
Possibly related...
On occasion, I'm having an issue in Photoshop where the tools are off by 30 pixels or so. Examples:
- Paint brush affects an area approximately 30px to the right and down from the brush head.
- Selection tool selects an area approximately 30px to the right and down from the arrow head.
This only happens on occasion and can be fixed by restarting Photoshop. I have not had any luck fixing the problems experienced within Flash.
I'm experiencing this on two different machines that have CS4 installed. My only guess is a conflict with a Logitech driver OR a Wacom driver, but I have uninstalled the software and unplugged the Logitech mouse and Wacom tablet to no avail.
Long time Flash/Photoshop user.... never had a problem like this.
Anyone else have these issues or know a fix?
Mac OS X 10.5.7
Macbook Pro & iMac
Logitech Control Center 2.7.0
Wacom Driver 6.1.1-2(RC) for Mac OS X v. 10.4 & 10.5

Hi there,
This is a known issue, however we have not been able to reproduce it internally. The way to fix it (assuming it's the same problem) is to change your workspace (such as resetting to a default shipping layout, and then modifying from there), as it seems as though something about the workspace is causing the problem. It could be very specific to where its layed out on your monitor(s), some exact pixel size of a panel and/or grouping - and so on. However, we haven't been able to reproduce this internally yet - only reproed and fixed similar problems - so I cannot say for sure, however changing the workspace has fixed it for the other users I've talked to seeing this one.
If you are able to share the following about one or both of your computers and send it to jdh (at) adobe, greatly appreciated:
* workspace XML file from the Configuration directory (before changing the workspace!)
* description monitor layout (ie: primary on left, secondary on right... or "one" )
* monitor resolution(s)
* screenshot(s) of your layout exhibiting the problem
Thanks!

Datagrid select issue

I am using flex builder 2.01 and have been using datagrids
for a while now. I have recently ran into a weird situation where I
have one datagrid out of three that just will not allow a manual
selection. If I set the index to 0 for instance, the initial view
of the datagrid shows the first item selected. If I go to select a
different item, the first item becomes unselected and no other item
can be selected. If I leave the initial state to be no item
selected, I can never select an item. All other datagrids are
working fine. I have tried to set selectable to true but that
didn't help. This is really odd, any assistance would be greatly
appreciated.

Mmmm... Well the good news is I fixed it. The bad news is I
have no clue why it fixed it. This particular datagrid is in a
different tab in a tabnavigator panel. Attached is the expanded
working code. On the line:
<mx:Canvas label="Archived" width="100%" height="100%"
id="ArchiveTab">
I had a click="{GetPropertyArchive()}" to refresh the data on
tab selection. This was old code that was made unnecessary at a
later date but I did not remove the code. My guess is the datagrid
assumed the characteristics of the parent tabnavigator and instead
of ... wait that can't be right. If that was the case then changing
the datasource would not have fixed the select issue because the
'click' definition on the tabnavigator still existed. I would
really like to understand why this mattered so I could avoid this
issue in the future. Any ideas??

Select Path gets me the 'inverse' selection

i'm in Photoshop CS4 for Mac
lately, when I create a path that is some sort of closed shape, and click the 'select path' icon on the Paths palette, I get the inverse selection. Of course i can fix this with 'Invert Selection'. But how can I fix it so that when I 'select path' I get the interior, not the exterior, of the Path.
thanks
kurt

thanks, but I'm afraid I don't see how that helps me.
here's one thing I notice, I can see in the Path palette that in fact my current path is defined, somehow, as an Inverse path, as the little preview of the path shows the exterior of the path in white. When i start a new path, i see the little preview is giving me the opposite -- the interior is white. So, somehow it's defined one as an Inverse path. I don't know how to change this or how to avoid it happening in the first place.
in the thread you recommended, it suggested playing with the path 'options', which defines how overlapping paths are handled. that doesn't seem to change my 'inverted' status.

HP Laserjet 2200dtn paper select issue

I have an HP Laserjet 2200dtn connected via jet direct with a direct ip. I can print to the device with one issue. All print jobs using the "Automatically Select" option for paper tray go to the manual tray and require me to tell the printer to continue. Prior to Snow Leopard the driver would go to the first available paper feed drawer (if paper was in manual it would go there, otherwise it went to either tray 2 or tray 3 on its on). Any Ideas? I would rather the printer automatically select tray 3 to print from and have me manually select tray 1 when I need it.
Thanks.

Chances are the printer has a small bit of paper that is still jammed in it. When paper jams always try to pull in the direction of the paper path! If it tears then remove the toner cartridge to see if you can see any bits of paper inside. I have the Laserjet 1012 which is a similar design, early in it's life I had a similar issue, after removing the toner cartridge and seeing all bits of paper were gone I still got an error. I then removed the top cover of the printer, located and removed the offending piece of paper, put it back together and now several thousands of pages later all is fine.
If that doesn't work then contact HP's support (they will reply to an email with 24 hours) or go the chat route. If you try to call because you are well out of warranty there will be charge.

[Wine] Sound card selecting issues

Since a month or too, after one of my weekly updates, wine started to select the wrong sound card for its audio playback. Thus, alas, no sound in wine applications.
When selecting the audio tab in winecfg, I get the following console output:
fixme:mixer:ALSA_MixerInit No master control found on HDA NVidia, disabling mixer
fixme:jack:JACK_drvLoad error loading the jack library libjack.so.0, please install this library to use jack
I don't use jack, so that can be ignored. The HDA NVidia - the S/PDIF on my NVidia video card I presume, I don't use either. What I do use is my onboard sound chip in combination with alsa, which works perfectly on non-wine applications.
So, I got the following set up:
$ cat /proc/asound/modules
0 snd_hda_intel
1 snd_hda_intel
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: VT1818S Analog [VT1818S Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
card 0: SB [HDA ATI SB], device 1: VT1818S Digital [VT1818S Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ ls -l /sys/module/snd/holders
total 0
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_hda_codec -> ../../snd_hda_codec
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_hda_codec_hdmi -> ../../snd_hda_codec_hdmi
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_hda_codec_via -> ../../snd_hda_codec_via
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_hda_intel -> ../../snd_hda_intel
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_hwdep -> ../../snd_hwdep
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_pcm -> ../../snd_pcm
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_seq -> ../../snd_seq
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_seq_device -> ../../snd_seq_device
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_seq_oss -> ../../snd_seq_oss
lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_timer -> ../../snd_timer
$ lsmod|grep '^snd' | column -t
snd_hda_codec_hdmi 22593 4
snd_hda_codec_via 52963 1
snd_seq_dummy 1479 0
snd_seq_oss 29240 0
snd_seq_midi_event 5516 1 snd_seq_oss
snd_seq 50562 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5281 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_intel 21837 1
snd_hda_codec 74577 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
snd_hwdep 6222 1 snd_hda_codec
snd_pcm 72321 2 snd_hda_intel,snd_hda_codec
snd_timer 19537 2 snd_seq,snd_pcm
snd 58906 12 snd_hda_codec_hdmi,snd_hda_codec_via,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_page_alloc 7361 2 snd_hda_intel,snd_pcm
Note that I already blacklisted snd_hda_codec_nvhdmi, which was in the above output before blacklisting.
Also note the weirdness of having two identical modules for card 0 and card 1. I guess the chip on the video card is Intel as well. I this possible?
Now the list of things I tried, all without a positive result.
First, I completely reconfigured my alsa set up.
Secondly, I blacklisted snd_hda_codec_nvhdmi in /etc/rc.conf
Thirdly, I used the info from http://wiki.winehq.org/UsefulRegistryKeys to force wine to use card0:
AutoScanCards=N
AutoScanDevices=N
DeviceCTL1=hw:0
DevicePCM1=hw:0
Fourthly, I edited .asoundrc to force alsa to use only card0:
# define soundcard to use, hw0:0
pcm.!default {
type hw
card SB
# device 0
# define control device to use, hw0:0
ctl.!default {
type hw
card SB
# device 0
Finally, I tried the above globally in /etc/asound.conf
I even waited two wine updates to see if that would fix it.
All above did not solve the sound issue and winecfg still gives the same error output as before.
Note that the sound works fine in everything, except in wine.
Anyone has any ideas or insight?

Hi!
Similar problem here
[zom@myhost ~]$ winecfg
fixme:mixer:ALSA_MixerInit No master control found on HDA NVidia, disabling mixer
fixme:mixer:ALSA_MixerInit No master control found on HDA NVidia, disabling mixer
err:module:load_builtin_dll failed to load .so lib for builtin L"winemp3.acm": libmpg123.so.0: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio
fixme:winmm:proc_PlaySound Couldn't play header
fixme:winmm:proc_PlaySound Couldn't play header
[zom@myhost ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
[zom@myhost ~]$ cat /proc/asound/modules
0 snd_hda_intel
1 snd_hda_intel
I will follow some of your steps and research a bit to see if I can find something.
Please remember to post if you get it working!
Regards,
Edit:
Seems the card is not well specified in your /etc/asound.conf
% cat /etc/asound.conf
pcm.!default {
type plug
slave.pcm {
type hw
card 0
device 3
I think you should put the device also, as shown on your "aplay -l". Try and let me know (I will try asap).
Edit: Forget what I just said and just follow strictly the wine wiki page. In my case it was a problem when installing lib32-openal from the repos. It gave an error and did not install the first time, but I thought it was removed from the repos and wasn't needed anymore.
Last edited by Darkzom (2011-03-24 01:00:55)

F150- Free selection issue

Hi,
Dunning run is carried out only for a particular group of Industry (KNA1-BRSCH) in the transaction F150. It is not even selecting a single customer in the group when we consider it in the free selection. I have not ticked the exclude check box in the free selection tab when I consider the industry wise dunning.
But when we take individual customers and run then it is giving us the log.
please provide your inputs on this issue.
kind regards
sap student

Hi,
Please find length of the field KNA1-BRSCH in table KNA1 using transaction code SE11.
If industry value you enter in free selection (F150) is less than the character length defined for the field then you have to prefix it with Zeros.
For example if reconciliation account is of length 10 in table but your GL account length is 8 characters then you have to add two zeros before you GL account while using reconciliation account in free selection in F150 or F110.
Thanks!
Raju

Path Selection issue in Table Test

Hi All
I got issue in adding Form actions (ex:- Table test, Text matching test ) in my Oracle Forms and report product. It is not selecting the Path..
Can any one suggest why the Path is not selecting ...?
Appreciate your feed back.
Regards,
Sairam

Hi Deepu,
Please find the code below while doing text matching test
web.window("//forms:window[(@name='WIN1')]").verifyText(
"uniform", "365", Source.DisplayContent,
TextPresence.PassIfPresent, MatchOption.Exact);
Regards,
Sairam

Path selection issue

Hi All
I got issue in adding Form actions (ex:- Table test, Text matching test ) in my Oracle Forms and report product. It is not selecting the Path..
Can any one suggest why the Path is not selecting ...?
Appreciate your feed back.
Regards,
Sairam

Hi Deepu,
We are using OATS version 12.2, JAVA Version 6.0.350 and erp application is our own application developed in oracle 10g forms. We did not get any errors while installing OATS.
Regards,
Sairam

Web font selection issue in Muse?

Web font issue in Muse, when I load web fonts which have various weights i.e. regular and bold I an unable to select this font in any weight at all. Is anybody else experiencing this issue and has anybody got a solution?

Hi Zak
Just a quick follow-up after checking this issue at home. I opened Muse and loaded several web fonts, some of which had various weights available. I was able to select these fonts and change the weights fine. However I left Muse open and returned several hours later and found that I was unable to select any of these fonts.
So you workaround (turning Muse off and on again) certainly works but the bug is still there. FYI I am using the latest version of Muse on an iMac using Yosemite OSX. One thought, I have a screensaver set up on my home iMac, could this possibly cause this problem?
I will continue to monitor Muse on my iMac at work running on OSX Maverick to see if I get the same problem. I don’t have a screen saver set-up on this iMac as it’s never left long enough for it to start up.
This then may help determine if this is either an OSX Yosemite issue or a screen saver issue.
Kind Regards
Jeremy

Variable selection issue

can someone plzzz help me regarding the following issue..........
how to limit set of master data values in variable selection during query execution?
cheers
hari.

Hi,
check this link
it's for increasing the limit you can use it to decrease the limit.
BEX - number of displayed values
Thanks

AIR 3.6 + Android 4.1.2 + StageText + Tap Text To Select issue

Hi,
Have anyone experience the follwoing?. When tapping the StageText to select the text, the app moves up, the StageText moves down (originally the text appears in the text box, see the screenshot) and the top menu in Android (Menu to Cut, paste etc) goes behind the status bar, see screenshot. In general the StageText seems to beahve very erractic and very bad in Android (I dont know if it is specific for a certain Android OS or not). Any tricks, tips to make the StageText behave a bit more decently in Android?

Thanks for reporting the issue, Could you please raise it as a bug @ bugbase.adobe.com. Also, please do upload a sample application/sources and steps to demonstrate the problem. Also, please mention the device you're facing problem on.
Please share the bug number here for reference.
-Thanks
Pahup

BW-BPS Attribute variable selections issues

Hi Marc / Gerd,
I am using an attribute variable on material that has a lot of filters for values on material group, material type, EANUPC, and even a date such as created date / product start date (reference 0date).
The function /layout has issues if the selection has no material choosen and I know we needed to create exit variables on a previous project (someone else did the ABAP and I set out the spec) to do material group / category selection based on material attribute and the material group variable.
Any other good options or work arounds since we cannot use variable in attribute variables?
Thanks,
Mary

Hi Marc,
1. I checked the layout configuration and the config was transported okay to QA so the field that I want to input does not have compariable checked and it should be open for input.
2. there are no data slices yet.
3. Validation check - that might be an issue. The BW loads originally had some master data not loaded in BWQ and have some mapping not occuring as it should and I have been asking for them for the last 2 load cycles. I was told all missing master data have been since loaded and I need to ask for a load of the transaction again but the BW person is waiting for some missing mapping. Also we had to document enabled some infoobjects.
But the category we are using for the integration testing should have all the master data correctly set up since I checked on it end of last week. Do I have to set up some system settings for the document server? Do I need to force it to regenerate after some transports?
The master data we used for the 2 systems are different since the DEV has very little master data and some were manually maintained or uploaded via flat files. The BW QA has a lot of master data since R/3 QA has been refreshed recently.
Thanks,
Mary

Member Selection issue Smart View 11.1.2.1.102

Hi there!
I am experiencing an issue with several different cubes when accessing the member selection function in Smart View version 11.1.2.1.102. The issue is isolated to 4 Essbase cubes, but among the 4 are both ASO & BSO.
When I highlight the top, left-most Dimension name and click member selection, NO member names display and the dropdown list is unavailable. As soon as the given Dimension is moved out of the POV, I am able to see the full member list. This also means that the member that has moved into the top, left-most position now has the issue of not being able to select any members (certain dimensions are fine no matter their position).
I am able to move members around by pivoting the dimension and the member selection function behaves normally for some, but the issue pops back up as soon the dimension is moved back to the POV position.
If anyone has run into this issue with SmartView before and has a fix, please let me know. I would be happy to clarify my issue if anyone is unclear on what exactly I am trying to describe.
Thank you for your time!

This was a bug in 11.1.2.1.102. I'm not sure if it was fixed in 11.1.2.1.103 or 11.1.2.2 (I think 11.1.2.103)
It does not hurt you to upgrade to a higher version of Smart View

Hyperion Financial Reports - Member selection issue

Hi,
We are using Hyperion suite 9.2.0.3. We get an error during Member selection in POV when executing a book or report. The member selection window looks blank.
We have tried restarting the services of Financial report and Essbase. But no luck.
Can someone help us in getting this issue resolved.
Thanks,
Sethu

I'm not sure I have a good answer for you, but in my experience blank screens are usually caused by failing weblogic, apache, or a firewall setting.
You might have better success getting an answer in the Hyperion Query and Reporting forum.
Hyperion Query and Reporting
Good Luck,
Tim Young

Inverse Selection issue

Similar Messages

Maybe you are looking for