Inverted column on display

Hi,
I'm having a problem with the display on a 13" Unibody Macbook (A1278).
There is a column (about 2.5 inch wide) that is completely inverted, photo attached. It's not permanent, meaning that depending on the angle of the screen it sometimes goes away. I'm thinking it's a pinched cable but from what I have read on the internet some say you need to replace the LCD.
Have you seen this problem before? What would it cost to fix?
Is it the LCD panel or simply a bad connection?

Check whether your System Preferences > Universal Access > Display are set to "White on Black". It is possible to inadvertently activate tis option by the key combo shown next to the preference.

Similar Messages

  • Report column breaking - display text centred in cell

    Hi,
    I am looking for some help achieving the following:
    I have a report which has column breaks on the first three columns. Currently, when the report is displayed, the first column value is displayed in the top row with the rows underneath blank and so on for columns 2 and 3. Then the data for the other columns is displayed as normal.
    What I want to do is have the column values that are used in the break spanning the rows they break over so the text is displayed centred (vertically)
    ie:
    Col1     Col2     Col3           Col4     Col5
                                    dat1     dat2
                                    dat2     dat3
    val1     val2     val3          dat4     dat5
                                    dat6     dat7
                                    dat8     dat9
    val2    xx        xxx         xx        xx
    ________________________________________________ (Hope this works in ascii!!!) - Col1,2,3 etc are the columns - ignore the vals and dats - they're just data placeholders.
    All help much appreciated! :)

    Hi,
    Something like: http://htmldb.oracle.com/pls/otn/f?p=33642:112 ?
    If so, see: Re: How to achieve Page/Form/Report layout?
    Andy

  • Hiding a column when displaying an alv

    Hi Gurus,
    Shortly I have these things :
    1) A node with some attributes like customer_no, customer_name, status etc.
    2) A view which contains an element(viewcontainerelement) and this displays the node.
    This node is in CONTEXT of my view and in componentcontroller.
    Now i want to hide some attributes(columns) when displaying this alv. Can anybody help me?
    Thanks..

    Hi,
    When i write that code, it gives me an error message :
    data: lr_salv_column type ref to cl_salv_wd_column,
    lr_salv_table type ref to cl_salv_wd_config_table.
    lr_salv_column = lr_salv_table-if_salv_wd_column_settings~get_column( 'm_no' ).
    lr_salv_column->set_visible( if_wdl_core=>visibility_blank ).
    Error message:
    "Class "CL_MAINV_CTR" does not contain an interface
    "LR_SALV_TABLE-IF_SALV_WD_COLUMN_SETTINGS".      "     
    "Mainv" is the name of my view.
    I am new at WDA, please give me detailed information.
    Thanks
    Edited by: Adil Gündüz on Sep 22, 2008 11:13 AM

  • Blob Column to display Picture

    Hello,
    i have crated a table name Product , and i kept one column type Blob to upload pics for product. using wizard i created form with report.
    i can see the brows option on form but i can not see picture in report which is created durring wizard.
    how can i show the picture in report ? can anyone help me.
    Thanks,
    Suhaib

    Suhaib,
    <li> Check if the image function is fetching the images correctly by opening the image Location(fetched by the procedure) in a new browser tab
    It would be like, http//<your server>:<port>/<dad conf>/<schema>.<image fetch function>?<parameters >=
    In Andy's application this would be
    >http://apex.oracle.com/pls/otn/ATDSCHEMA.DISPLAY_IMAGE?inID=77
    <li> Check the report column's display type and change it to standard report column.

  • Column chart display

    Hi experts,
                  I amusing column chart, its having 100 line of date, but when  i preview its showing all the 100 line of data, but i need scroll right to see the columns first 10 columns should display, then i have to scroll n see the data, how to achieve this
    thanks

    Hi Russel,
    Use the range slider to achieve this, give 1 in beginning range and 10 to end range value.
    hope this helps!!!!

  • How to get LOV column's DISPLAY value in IR report?

    Hi,
    I would like to get LOV column's DISPLAY value to trigger another javascript function. Could you please provide any hint?
    For example, there is one IR report with 2 column, DEPT_NAME & SHOW.
    The DEPT_NAME type is LOV .
    The SHOW column is one link image, when clicking it , I would like to fire a javascript to get DEPT_NAME 's display value.
    I know I can use #DEPT_NAME# to get the return value of LOV. However, how to get current row's DEPT_NAME's display value?
    Thanks in advance.
    Ray
    Edited by: 最爱用中文 on 2013-4-11 下午4:14

    Is there any way you can create a table join, instead of using LOV as your display type?
    That way you can select the name of the department in your IR query, display it as text, and then easily reference it as #DEPARTMENT_NAME#, for example.

  • Column that displays a thumbnail shows red X if no thumbnail exists in IE

    Hi,
    I have a column that displays a thumbnail jpg for a product in a shopping cart.
    If a thumbnail was not loaded it shows the outer size of where the jpg would be seen and has a doc gif with a red X in IE but not Firefox.
    I have IE 7
    I am using APEX 4.0 and the column is actually the product ID and then has the
    BLOB Download Format Mask
    IMAGE:PD_PRODUCTS:THUMB_NAIL:PRODUCT_ID::MIME_TYPE:THUMBNAIL_NAME:UPLOADED_ON::attachment:Download
    so using a decode doesn't work because it still is passing the null to the column item.
    I tried a condition for the IR report saying #IMAGE# is not null but kidda knew that wouldn't work...
    ??????????? How do I not display anything the product ID is null??
    thanks, Bill

    Hi,
    Taken from demonstration application
    decode(nvl(dbms_lob.getlength(p.product_image),0),0,null,'<img src="'||apex_util.get_blob_file_src('P6_PRODUCT_IMAGE',p.product_id)||'"  />') img Regards,
    Jari
    Edited by: jarola on Sep 9, 2010 9:48 AM

  • Hiding few columns before displaying alv grid output

    Hi All,
    I struck up at hiding few columns before displaying alv output. I have used used FM: REUSE_ALV_GRID_DISPLAY. By using this i am displaying 29 fields to the output. But before displaying the output i want to hide few columns among them, and also those fields have to be avialable for further selection by the user by using layout.
    Kindly help me in this,
    Regards
    Srinivas K

    Hi,
    In field catalog set NO_OUT='X' for all the columns you want to hide. They will be available when changing layout for ALV, so you can show them at any time.
    Regards
    Marcin

  • Customize Which Column to Display from UDT in UDF when Linked to UDT

    Problem:
    I have a UDF that links to a UDT. The problem is that when I select the UDF, it only displayes the columns from the UDT Code & Name. And for our purposes Code & Name are meaningless data points.
    Question:
    Can I choose which column is displayed from the UDT in the UDF?
    Please see the attached image. THANKS!

    Hi,
    This is SAP B1 standard behavior, But you can change name as terminal code. Other wise you can  detach the UDT from UDF and then assign one FMS in the UDF for serach terminal code instead of code and name.
    Hope this will work.
    Regards
    Sridharan

  • Why did column host display red  in list of Tcode st22

    dear expert,
      Suddenly i found a question. It was why in some dump column host displayed  red  when i excecuted st22 . But some did not displayed red host.
      Hope to answer.

    As far as I know it shows red when you are logged in the application server where the short dump occured. Same happen with the username, if the short dump belongs to you will show red.
    Regards
    Juan

  • Column Header Display

    Hello,
    I have a requirement where the columns need display as given below:
    When a Material is displayed with key then the header reads as "Material".
    Whe both Key and Text are display the Key column has the header as "Material", whereas the Description column does not have any header.
    Is it possible any way to display the text as "Material Description".
    Appreciate any ones feedback.
    Thanks
    Sundar

    The customer is looking for the Header to read as
    Material Description
    Vendor Name
    Plant Name etc.  Since I have so many objects where this is a requirement it is a problem with the creative solution.  Although that is a great way to go with.
    The VB is a maintenance issue and not allowed for any of the reports.  I would prefer something within BW to acheive the description.
    Thanks for the quick reply. 
    Sundar

  • Column Chart displaying blank columns

    I've this column chart whose data provider is set dynamically. The chart has a two Column Series. Occasionally the columns are displayed as blank.
    Although the corresponding labels on x-axis and tool tips are displayed correctly. Has anyone experienced similar issue? Kindly suggest a solution.

    Thanks for the reply. No the data provider is surely not null as the same collection
    is being set as data provider for a data grid too. And data grid always displays the data.
    Besides if the data provider was null it wouldn't have shown the x-axis labels and the
    tool tip values.
    Code Sample:
    Basically chartData is a XMLListCollection object, its being populated on a call back method of a
    HTTPService request.
    The following method is called once the chartData is populated.
    //Populate columns for abcChart
    private function populateColumns():void {
         abcChart.series = new Array();
         var haltsSeries:ColumnSeries = new ColumnSeries();
         var haltsFill:SolidColor = new SolidColor(0xFF0000);
         haltsSeries.dataProvider = chartData;
         haltsSeries.displayName = "Halts";
         haltsSeries.yField = "HALTS";
         haltsSeries.setStyle("fill",haltsFill);
         abcChart.series.push(haltsSeries);
         var warningsSeries:ColumnSeries = new ColumnSeries();
         var warningsFill:SolidColor = new SolidColor(0xFFFF66);
         warningsSeries.dataProvider = chartData;
         warningsSeries.displayName = "Warnings";
         warningsSeries.yField = "WARNINGS";
         warningsSeries.setStyle("fill",warningsFill);
         abcChart.series.push(warningsSeries);
         return;
    Following is the Columnchart with its children and properties.
    <mx:ColumnChart id="abcChart" showDataTips="true"
    width="100%" height="95%" visible="false"
    dataTipFunction="chartDataTip">
    <mx:backgroundElements>
    <mx:GridLines direction="horizontal">
    <mx:horizontalStroke>
    <mx:Stroke color="0xCCCCCC" weight="1"/>
    </mx:horizontalStroke>
    </mx:GridLines>
    </mx:backgroundElements>
    <mx:horizontalAxis>
    <mx:CategoryAxis displayName="Area"
    categoryField="AREA"/>
    </mx:horizontalAxis>
    <mx:horizontalAxisRenderer>
    <mx:AxisRenderer fontSize="8"
    cachePolicy="off" rotation="40"/>
    </mx:horizontalAxisRenderer>
    <mx:verticalAxis>
    <mx:LinearAxis title="Count"
    minimum="0" autoAdjust="true"/>
    </mx:verticalAxis>
    </mx:ColumnChart>

  • Column format displaying as number

    Hi All,
    The values in columns loan_date are dates but is displaying as numbers. Rate column should display as 0.02, 0.04, 0.34, .089,.....
    I created a function for the same which works fine while querying but having issues while updating. suggestions please
    CREATE TABLE HIST_TEMP
      LOAN_DATE  VARCHAR2(20 BYTE),
      RATE       VARCHAR2(255 BYTE)
    SET DEFINE OFF;
    Insert into MODMGR.HIST_TEMP
       (LOAN_DATE, RATE)
    Values
       ('40422', '0.04');
    Insert into MODMGR.HIST_TEMP
       (LOAN_DATE, RATE)
    Values
       ('40575', '2.4E-2');
    Insert into MODMGR.HIST_TEMP
       (LOAN_DATE, RATE)
    Values
       ('40269', '4.6249999999999999E-2');
    Insert into MODMGR.HIST_TEMP
       (LOAN_DATE, RATE)
    Values
       ('40483', '2.4E-2');
    Insert into MODMGR.HIST_TEMP
       (LOAN_DATE, RATE)
    Values
       ('40360', '2.9000000000000001E-2');
    Insert into MODMGR.HIST_TEMP
       (LOAN_DATE, RATE)
    Values
       ('40513', '4.65E-2');
    Insert into MODMGR.HIST_TEMP
       (LOAN_DATE, RATE)
    Values
       ('40452', '2.6749999999999999E-2');
    Insert into MODMGR.HIST_TEMP
       (LOAN_DATE, RATE)
    Values
       ('40269', '2.9000000000000001E-2');
    Insert into MODMGR.HIST_TEMP
       (LOAN_DATE, RATE)
    Values
       ('40360', '3.4000000000000002E-2');
    Insert into MODMGR.HIST_TEMP
       (LOAN_DATE, RATE)
    Values
       ('40210', '2.1749999999999999E-2');
    COMMIT;Function
    CREATE OR REPLACE FUNCTION convertSerialToOracleDate(p_serial_date NUMBER) RETURN DATE
    IS
    BEGIN
    RETURN (TO_DATE('01-JAN-1900') + p_serial_date)-2;
    END;Thanks
    Edited by: AJR on Oct 16, 2011 5:42 PM
    Edited by: AJR on Oct 16, 2011 8:48 PM

    AJR wrote:
    Hi All,
    The values in columns loan_date are dates but is displaying as numbers. Rate column should display as 0.02, 0.04, 0.34, .089,.....
    CREATE TABLE HIST_TEMP
    LOAN_DATE  VARCHAR2(20 BYTE),
    RATE       VARCHAR2(255 BYTE)
    SET DEFINE OFF;
    Insert into MODMGR.HIST_TEMP
    (LOAN_DATE, RATE)
    Values
    ('40422', '0.04'); ...
    Thanks for posting the CREATE TABLE and INSERT statements; that's very helpful.
    Don't forget to post the results you want from that data, and an explanation of how you get those results from that data (to make sure the solution works with dta other than the small sample set you post).
    Always say which version of Oracle you're using.
    As the others have said, you really ought to store dates in DATE columns, and numbers in NUMBER columns.
    What exactly is the problem here? Do you want to always display 4 characters for rate, adding leading '0's when rate can be shown precicesly with fewer than 4 characters (including decimal point_?
    If so, you can do something like
    SELECT     loan_date
    ,     rate
    ,     SUBSTR ( RTRIM ( TO_CHAR ( TO_NUMBER (rate)
                         , '000.000'
                     , '0'
                , -4
                )     AS rate_3
    FROM     hist_temp
    ;This assumes that 0 <= r < 1, where r is the numeric value of rate.
    I created a function for the same which works fine while querying but having issues while updating. suggestions pleaseMake sure you only try to set the VARCHAR2 columns to VARCHAR2 values.
    If you need help, post a few of the problem UPDATE statements, and the desired contents of the table after each one.

  • Why calculated column never display on "View - Total" selection

    In SP 2010 Foundation list, I have a calculated column called "COMP TOTAL".
    But why calculated column never display on "View -> Total" selection? In this case any work around for me to display out summation of a calculated field?

    check this
    http://community.bamboosolutions.com/blogs/bambooteamblog/archive/2009/04/24/how-to-total-calculated-columns-in-a-sharepoint-list.aspx
    https://www.nothingbutsharepoint.com/sites/eusp/pages/sharepoint-displayinig-calculated-column-sums-in-a-view-screencast.aspx

  • How to wrap text in two columns and display as one in WAD

    Hi ,
    I have the following columns in my ODS , they are not KF's
    c1        c2    c3    
    100      AA      BB
    200      CC      DD   
    I need this display format
    100   AA
          BB
    200   CC
          DD
    I need to wrap the text in columns c2 and c3 and display them under one column.
    Is it possible in  webtemplate by using java scripting.

    IN the Query , you could diplay Characteristics as a Hierarchy. Just above the Columns Box in Bex, do a write click.
    Hope this helps

Maybe you are looking for