Inverted layer mask not working

I havent used PS much of late but in CS6 when layer masking the technique I used to use doesnt seem to work anymore. I would have two layers. The top layer I would put a layer mask. Then I would select all and delete hit the delete button so the mask would turn black and invert. Then instead of painting black over white to reveal the bottom layer I would paint white over black to bring my top layer back. I liked doing it like this. But its not working now. When I paint with white on the black mask nothing happens?? I tried inverting in the properties but makes no diff. What am I doing wrong?

Check the blending mode on your brush. It may be set to darken or some other blend mode than normal. As a side note, you can invert a layer mask be making sure it's selected and press ctrl/cmd-i. You can also create a mask where everything is hidden by pressing alt/opt then clicking on the add layer mask icon in the layers pallet.

Similar Messages

Black brush on layer mask not working. Please help/

I have been using CS6 for a while now. CS 6 decided that I can't use my black brush on a white layer mask. At all. I can use the white one on a black mask, but not the black one I. I restarted the computer, but I am annoyed. Has anyone has this problem? Solutions? I am so over my head with photos to finish...this was going to be my big weekend to work at night.

Look at Options bar. Is the brush in Normal blending mode?

Alt + click on layer mask not working/enabled

Im wondering if anyone else has come across this problem and managed to solve the issue!
Basically, when I go to view the layer mask by holding alt and clicking on the layer mask it doesn't function. Along with this problem, when I go to toggle my adjustment layers on and off, by holding alt and clicking on the eye symbol next to the background layer... again this doesn't work.
Im not sure if I have accidently clicked on something that has disabled these functions or its just a bug.
Please, can anyone help with this?
Thanks
Dave

Yeah I tried both Alt keys, that wasn't the problem. I could use both Alt keys to do shortcuts and they worked, just didn't work when it came to toggling off and on the adjustment layers and also viewing my mask, when Alt clicking on it.
I even tried opening the file in an older version of photoshop and still had the same problem.
I was about to re-install the program or reset it back to its default settings... then decided to do a selection of the image, cut it out and pasted it into a new document and then dragged my adjusment layers over to the new file. Hey presto! the functions worked.
Think it was just a case of the image or file in general becoming corrupt or just having some sort of bug.

CS5 Layer Mask not working. Hide all not hiding

I need some help here. CS5 on win 7 64 bit. Duplicate layer and apply a layer mask (alt click) and it does not hide the layer. Just applying a mask and painting with black also does not hide. If I hide the background layer then the mask appears as the white and grey checkerboard pattern, no solid color. Am I missing something simple?
Thanks, Dave

The checkerboard indicates places where your entire document is transparent through and through.
I suspect your mask is working as it's supposed to, and that when the background layer is visible you're just seeing through to the duplicate layer below - which by definition will not look any different on your display.
Try this:
Add a brightly colored solid color fill layer just below the layer you're masking. Now see what the mask does to the upper layer.
-Noel

Painting on Shape layer mask not working correctly

I created a Gradient layer and assigned a vector mask. I then added a mask channel. When I activate the mask channel the forground/background color switch to black and white, but if I attempt to swap the colors, either by clicking the "Swap colors" icon or "Shift-X" the LAYER color changes to black. I am unable to simply paint with black or white on the mask channel. Am I doing something wrong or is there a bug in PSCC 14.2?
This process works as expected n PSCS6.

Am I doing something wrong or is there a bug in PSCC 14.2?
Is the question meant seriously?
Is the Layer Mask actually selected in the Layers Panel?
Could you please post a screenshot with the pertinent Panels visible?

Layer Mask not working

I have Photoshop CS5 and until tonight, I could add a layer mask, paint it with a black paint brush, and it would show the layer underneith. Not, the black paint brush does nothing. This is so frustrating, I even uninstalled and reinstalled the product and it was of no help. I must be doing something wrong. I checked the help article on this and followed the instructions carefully, except the part about Layer, Layer Mask, reveal all, because reveal all was grayed out. Any suggestions?

Steve,
That will take a real bite out of editing a Layer Mask, as will having the Blendin Mode of the Brush set to something, besides Normal.
Glad that you found it, and happy editing,
Hunt

Brush Tool/Layer Mask not working. Please help!

When I use the brush tool on the layer mask after using the quick selection tool and refining the mask, the black doesn't do anything and the white erases the image.

Look at Options bar. Is the brush in Normal blending mode?

For some reason the masking layer is not working in my CS6. I know I have all the settings correct!

For some reason the masking layer is not working in my CS6. I know have everything set correctly! Please help.

Hard to guess on this type of question at you are not offering any tip on what you are doing. A screen shot might help to see how you have things set.

Mask not working correctly?

Hi every one!
I have this problem with my mask not working properly, i have an image, and it has an red fruit sitting on a table,
i have to make the picture sepia using an adjustment layer ( my lecturer says it MUST be done that way)
but leaving the fruit as red as possible. So when i do this i MUST use the layer mask provided by the
adjustment layer, but what is happening is the orange is going a very faded red ( but not quite sepia), the table BG does go sepia..
so its KIND OF working but not really.
Cheers
Bunny Face

Check your mask by OPTION CLICKING on the mask icon on the specific layer. This will show you a greyscale mask. BLACK hides, WHITE REVEALS. SO obviously grey does half of each! So if you dont want the apple to be affected by the layer mask you must paint it BLACK in the mask of that adjustment layer.

(three-way color corrector) secondary color correction masks not working?

Hi I'm using PP 2014 on Yosemite. Anyone notice (three-way color corrector) secondary color correction masks not working?

strange. same stats here but im getting intermittent.... sometimes i can use the mask and the effect is only limited to the masked area. most of the time the masked area is ignored and the effect is applied to the whole image

Layer Mask not revealing the right colors

Hi I am new to Photoshop CS6, and photoshop in general. I am trying to take a color photograph, turn it to black and white, and reveal a flower in color and the rest is still black and white.
I thought I had done this properly when I added a new "adjustment layer, hue/saturation", reduced saturization to zero, and painted the yellow flower over with black to reveal the yellow flower's color while the rest of the photo is still black and white. And it worked..except when I got to the green stem of the flower. Painting over that with black revealed a yellowish-green stem.
I experimented a little more by painting black on the new layer mask and most of the rest of the color photo comes out wrong. The blue sky shows up like a weird smurf blue, faces are oddly peach/orange and most colors look much different than the originial photo. Yellow seems to be not affected, magenta/pink seems to be OK and blue shows up so-so. But the rest of the colors are messed up.
I know this must be something very basic, but why are the colors showing up odd?
Thanks

Sounds like you did the right stuff. You should expect to see the colors revealed where the mask is made black. I might have used a Black & White adjustment layer rather than Hue/Saturation, as that would give you more control over the grayscale part of the result, but the technique with the mask should be the same.
Any chance you could take a snapshot of your screen, save as a JPEG, and paste it here? That will help avoid a whole lot of questions.
I noticed your screen name... I live in "bokeh". The weather has turned nice down here after Sandy passed by, eh?
-Noel

Help - Simple mask not working in Flash CS4

Hi everyone,
Thanks for taking a minute to read my post.
I am creating a very simple mask using motion tweening. I created some text on a layer and made it a masked layer. Then I created a mask layer which consists of a circle that will span across the text. When I play the movie the circle does not show up at all in the frames the mask layer spans (it's purple on a black background) and the circle does not move across the text like I told it to with the motion tweening. I don't know why it's not working. For some reason the circle isn't showing on the stage at all and it's not moving across the text. I don't know if I have it set up wrong on the timeline or what. Here's the steps I followed to create the mask:
1.insert a new layer in which I named it mask and click frame 1 on this layer
2. select the oval tools on the tools panel and set the stroke to none
3. set the fill color to purple
4. draw a circle and click the selection tool and drag a marquee around the circle to select it.
5. click insert on the menu bar, click motion tween then click ok in dialog box about converting it to a symbol to be tweened
6. click the last frame in the mask layer and drag the circle to the end of the line of text
7.click mask on the timeline to select the mask layer, click modify on the menu bar, point to timeline then click layer properties
8. verify the show check box is selected in the name section, click the lock check box to select it, click the mask option button in he type section, then click ok.
9. play the movie in which the circle object covers the text on the masked layer as it moves across the stage
Thanks for your help!
ashmic19

Update 8-2-10: In play mode the text was still visible when it shouldn't be but once I tested the movie the mask worked correctly with the text. So problem solved
-ashmic19
Thanks for all who viewed this. I finally figured out why it wasn't working. I had the mask layer locked. But now the circle is moving across the text but the text is viewable when it shouldn't be until the circle moves across it. How come it's doing this?
ashmic19
Message was edited by: ashmic19
Message was edited by: ashmic19

Mask not working correctly in swf

Hai Friends,
I am trying to do a simple masking which works correctly in
fla but when viewed in swf the text which is masked is not
seen..What i did is first i wrote some text converted it to
movieclip then in another layer i did draw a rectangle with some
color and right clicked the rectangle and masked it When viewed in
fla the masked text is viewable but when converted to swf the text
is not seen Is it some problem with Flash Can you please help me...

Text is not able to be masked in Flash by default.
You CAN do this IF you embed your text (or simply break it
apart into vectors if it doesn't need to be dynamic).
To break apart - select your text and hit Ctrl+B twice (Cmd+B
on Mac). This will make the text vectors, thus negating the
problem.
Otherwise, you need to embed the fonts in 2 ways. First, if
you like, you can click the "Embed fonts" button in the properties
panel, and select what to embed. OR, you can go to the Library's
drop-menu and select "New Font" - choose your font, and click OK.
Either of these methods embeds your font. BUT, there is one more
step. You need to give your text box an instanceName, go to the
actions panel, and enter the following:
myTextBox.embedFonts = true;
This will finish the embed process to allow the masking (and
alpha changes) to work for the text.

Am I Missing Something Obvious? Layer Mask Not Confined to Selection.

Hello, I really hope I am not missing anything obvious.
I am working on a .psd in Photoshop CC in which I used a selection to precisely remove a portion of a layer in a layer mask. The problem is that it is removing a percentage of the opacity in the non selected area. The brush has 100% Opacity, 100% Flow and is in Normal Mode. The layer has 100% Opacity, 100% Fill, and is in Normal Mode. I have tried restarting Photoshop and starting over from scratch. Here is an image of the issue.
My only other concern is that on Friday we had a power outage due to lightning and PS CC closed unexpectedly. Could my PS CC be corrupted? My computer has restarted since then. Any suggestions would be wonderful. Thanks!

The power outage should not have corrupted your Photoshop to cause this to happen. Worst that could have happened is Photoshop was forced to quit and your preferences did not get save for yourt panel layout and prefertence settings.
Is your brush filled with 100 black, the swatch looks dark but you may be at 90% black.? Your screenshot looks fine though as if the mask is working correctly, can you post a screenshot that better shwos the problem.

Mask not working on loaded jpg

Hi,
I have a blank movie called "shell" on a frame, which is
where I load the jpg. - shell.loadMovie("1.jpg");
Above that the frame that contains the shell movie, I have a
mask layer. Once the jpg is loaded, I have a shape animation on the
mask layer that reveals the jpg.... but for some reason it doesn't
work. If I take away the mask layer it displays properly.
*UPDATE*
The mask stops working when the shape tween starts. Initialy
the masks works when there is no tween on the mask layer.

Thanks - your example worked for me. Not sure why I couldn't get it to work before. I think it was because the mask and the item were the same exact size as well. I created another example and posted below which is what I was going for.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
    layout="absolute">
    <mx:Canvas width="300" height="30" horizontalCenter="0" verticalCenter="0">
        <mx:ProgressBar
            id="prog"
            label="1234"
            width="300"
            height="30"
            indeterminate="true"
            labelPlacement="center"
            mask="{maskCanvas}"/>
        <mx:Canvas
            id="maskCanvas"
            width="295"
            height="20"
            backgroundColor="#000000"
            borderColor="#000000"
            borderStyle="solid"
            cornerRadius="10" horizontalCenter="0" verticalCenter="0"/>
    </mx:Canvas>
</mx:Application>

Inverted layer mask not working

Similar Messages

Maybe you are looking for