Inverted or negitive color display?? need to set back to default?.

like 4 months ago i switched to mac and got a g5 was really into it then went otta town for 6 months and before i left i set the cpu to like negitive (what i view is all backwards colors but now i can't figure out the setting to set it back to the defalt color scheme...please any help would be great.

Open the Universal Access pane of System Preferences and turn off the White on Black option under the Seeing tab, or press the Control, Option, Command, and 8 keys simultaneously.
(13247)

Similar Messages

  • HT1338 How do I reset the display setting back to default?  My display is zoomed to one corner and the other 2 sides are cut off.  I don't know how to fix it.

    My baby nephew pressed a lot of the buttons on the my mac and has caused the display to zoom into one corner.  It other two corners are cut off which makes it really difficult to use the computer.  I attatched and image so that you can see what I am talking about.  Please help, thanks !  =)

    Hold down the Control key and scroll with the mouse or keyboard.  One direction zooms the other unzooms.

  • I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

    I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

    What is the problem specifiaclly?
    If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
    You could also try Image Processor Pro.
    Scripts Page

  • CR 9 - Need HELP Setting Line Graph colors in the Chart Expert

    Post Author: desselle
    CA Forum: Charts and Graphs
    Hello,
    I created a Crystal Report (CR) based off an existing Trend Analysis report. I have created a VB6 application that calls the .RPT file I created for the report in CR.  The VB6 app sets the report recordset via code that corresponds to the .TTX file, and the parameters .  The report contains a Line graph that plots five pieces of data.  The report & graph work good.  The Problem: CR determines the color of each line on the graph.  However, I need to set the color for each line to correspond to the colors used on our existing reports.  The users are accustom to a certain color representing a certain set of data on the existing reports.   I have tried everything I can think of and from all documentation I can find, and nothing changes the line colors.   I have tried all of the following:
    1.) From the Chart Expert, Option tab, I click the Format button next to Color and setup conditional color settings per each piece of data.   However, when I run the report these conditional color settings are not reflected on the CR graph.     I am using formula fields (based off database fields in the recordset) to produce the report.  However, I only see the database fields to use in the conditional color formatting screen and not the formula fields.    I thought this would possibly be the cause why the colors wonu2019t change on the CR, but I canu2019t find a way to make the formula fields show up in the list.
    2.)Also, I tried right clicking the individual lines of the graph and change the selected item color, but this didnu2019t change the color either.  I do this in Design mode and Preview mode and neither one changes the color of the lines on the graph.
    3.)I have also looked into the CR object model to see if I can change the line colors of the graph via code and it doesn't look like I am given this flexibility.
    Do you know what I am doing wrong here?   I just want to be able to set the color of each line on the CR graph to the color I want instead of using the default colors.  Are there some Hot Fixes that I need to apply to my copy of CR?
    Thanks

    Post Author: desselle
    CA Forum: Charts and Graphs
    Hello,
    I got the problem fixed w/ the line graph not making the data lines the same color on the report as on the frmPlot graph.   Compare the two screen shots below.   The problem was as follows:  When I created the graph (in the Chart Expert) the field u201CReadingDateu201D was not one of the Report Fields, and all the other fields were Report Fields (Reading, LowAlarm, UpperAlarm, LowerLimit, & UpperLimit). See the 3rd screen shot below.  ReadingDate does show up as a Report Field now but it wasnu2019t at first.   Originally, this field was only available in the Chart Expert as a recordset field.  When I changed this field to be a Report Field, the graph then allowed me to change the data series line colors.   This was not obvious at all.   From the beginning when I setup the graph and passed in the recordset from VB it graphed all of the data series fine.   The colors that the Chart Expert chose for each line just didnu2019t match what was on the frmPlot graph.   Anyway, it is working now.     I can at least say I learned (somethingu2019s to-do and somethingu2019s not to-do) a good bit about Crystal Reports in the process.
    Thanks

  • Color/Display setting 17" iMac

    I am not at the Mac at this time so I forget some steps.
    The colors on the monitor were tending to be dark and the display of a spec'd PMS color definitely did not match, so I went into System Preferences, chose "Display" and then chose the color settings option. I clicked the option for advanced color settings. WHY did I do this? Duh!
    After I went through all the "iMac" color settings, I saved the new calibrations. Somewhere along the line I came to screen display size (?). I clicked 1024 x 840 (like I said, I'm not at the iMac right now) or something close. WOW! I got everything BIG. It filled the screen all right! This was not what I wanted...I wanted to go back to the regular look. I returned to the Display, chose a lower size screen setting and the display was smaller than the area I have available.
    I kept the larger setting because I don't know what else to do. When I read emails, the display is so large that my messages are down in the lower right off the screen.
    All the icons on my desktop are wierd as well. The menu items are huge. Everything is huge. There was no "middle-size" setting for display. Where do I find Default settings? I've tried everything.

    Use a hardware calibrator and while you're waiting for it to arrive, calibrate using the built in calibration in the system preferences for the display. Make sure you turn on the advanced options when you hit calibrate and calibrate to gamma 2.2 and a 6500K white point. These are not Apple's defaults but are essential. If you do at least that you'll get very good correspondence between print and monitor. A hardware calibrator will get you there absolutely. NEVER choose a working space profile such as adobeRGB or sRGB as your monitor profile. Monitors almost never correspond precisely to either of these and on a Mac, there is no excuse to not use at least the free built-in calibration. Apple's monitors (which you are using if it allows ColorLCD) are never near adobeRGB, they are usually closer to sRGB.

  • I am having problems to run an app, there is an error display that says I need to set bonjour and that this app serial number has been used by another red user,  could anybody guide me?

    I am having problems to run an app, there is an error display that says I need to set  bonjour services

    Logic is the APPlication (program, app) that you are having the problem with.
    Logic Pro can take advantage of other computers on your local (home or work) network to help it do "heavy lifting" data chores by using Bonjour and a feature called Nodes.   It seems that Logic is attempting to find and connect to another machine on your network.
    Do you have Logic installed on another computer there?  That may be the source of the confilict.
    You might want to post this question in the Logic Pro Community.
    Be sure to indicate the version of Logic Pro that you are using.  I'm sure the folks there can help you out.

  • I am having problems to run logic pro 9, there is an error display that says I need to set bonjour and that this app serial number has been used by another red user,  could anybody guide me?

    I am having problems to run logic pro 9, there is an error display that says I need to set bonjour and that this app serial number has been used by another red user,  could anybody guide me? actually, my computer can't start  since three days ago, could it be the same problem?

    Logic is the APPlication (program, app) that you are having the problem with.
    Logic Pro can take advantage of other computers on your local (home or work) network to help it do "heavy lifting" data chores by using Bonjour and a feature called Nodes.   It seems that Logic is attempting to find and connect to another machine on your network.
    Do you have Logic installed on another computer there?  That may be the source of the confilict.
    You might want to post this question in the Logic Pro Community.
    Be sure to indicate the version of Logic Pro that you are using.  I'm sure the folks there can help you out.

  • Need to set applet background color

    Hi, I try to write an applet in java and I need to
    set the back ground color of my applet to
    ==> RGB ( 66 , 144 , 216 )
    how can I do that??
    I have already looked at Java API and couldn't
    such a method: setBackGroundColor(66,144,216);
    please help
    thanks

    import java.applet.*;
    import java.awt.*;
    public class Example extends Applet {
         public void init() {
              setBackground(new Color(66,44,216));
    }

  • Macintosh Color Display

    I just bought a used Macintosh Color Display from a local thrift store. I have brought it home only to find that the adjustment holes on the back seem to have no effect when a tool is inserted & I attempt to adjust the screen's geometry. For my tools I'm using a $15 Kronus toolkit I bought from our local Radio Shack store. The monitor is currently hooked up to a Mac Performa 405 with Mac OS 7.5.5 & maxed out RAM & VRAM. Through trial & error I eventually figured out that I needed to enable the LC Monitors extension for the Macintosh Color Display to show up as a valid choice in ColorSync's list dialog box that opens when selecting the monitor model. I have also downloaded a manual for it from Apple's Support website too. According to the manual I'll need to take apart the monitor to get at the geometry adjustment controls. I also need to find the Apple Display Utility download in the event I should need to attempt to calibrate it. Is the only feasible way to adjust the monitor's geometry by opening it up?

    Update: I have taken off the case of the monitor yet again to perform the adjustments. The problem is simple. I had adjusted it previously but the setting won't stick & now the left & right edges of the image look distorted. The odd thing is they looked fine at the time when I did the adjusting. I also had the fuse tested at Radio Shack & they said it was still good. I have also discovered something quite disturbing while the monitor was open. There is a capacitor inside with a y shaped marking on top of it rated at 2200uF. I also recently read a Wikipedia article which suggests that such capacitors with a y shaped marking on top & rated over 480uF may need to be replaced. It wouldn't surprise me in the least considering the monitor was made in November 1993 according to the sticker on the bottom edge at the back of it. I also had a recent experience with Apple's Tech Support over the phone via their 1-800-SOS-APPL number. I told them I suspected bad capacitor/s may be the cause of my issue too. I was also sent a survey by email shortly afterward. When I called their Tech Support they said the monitor was purchased from Apple in 2003 but I bought in sometime during the first quarter of 2006 from the local MVAC Thrift and More store. Will the repair be covered as a manufacturer's defect too despite the age of the monitor? Should I take the monitor to my local Apple Authorized Service Provider? More importantly will I have to pay for the repair?

  • Cannot execute autocheck DISPLAY variable not set Oracle 10g Solaris 10

    Hallo!I am a total Solaris newbie. I am trying to install Oracle 10g on Solaris 10 but when I run the runInstaller,th following error appears
    Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<I have set the display parameters in the oracle user via command
    $ export DISPLAY=joey-solaris:0.0
    The SUNWxwplt is installed.
    How do I resolve this?
    Thanks

    4joey1 wrote:
    xclock can run as root user but not as oracle user
    by doing
    $ export DISPLAY=joey-solaris:0.0
    I think its similar to
    $ DISPLAY=workstation_name:0.0
    $ export DISPLAY
    as shown from your reference http://download.oracle.com/docs/cd/B19306_01/install.102/b15697/app_ts.htm#sthref1226 but still the error appears.
    Thanks.Assuming you are connecting to the solaris box from you workstation via telnet or ssh ...
    Do you have an x-server (such as Exceed or xming) running on your workstation?
    Did you set DISPLAY to the ip of your workstation, not the solaris server?
    DISPLAY is redirecting "x" output to the specified location (your workstation), and there needs to be an x-server running at that location.

  • Does Flex support 256 color displays?

    Hi all,
    Does Flex / Flash officially support 256-color displays? I
    can't get the Image control to display any images at all when the
    display is set to 256 colors.
    I've tried PNG, GIF, and JPEG images with monochrome, 16
    color, 256 color, and 24-bit palletes (in every combination the
    formats allow). They *all* work fine if the display is set to
    15-bit color or higher, but *none* of them work if the display is
    set to 256 colors. I would have thought at the very least that the
    Flash player could show a monochrome image on a 256 color display
    Does anyone know if this is a limit in the Flex control, or
    the underlying Flash controls? Could I solve it by using some Flash
    control directly?
    FYI, this the problem exists on both machines that I have
    tested so far. Both using Windows 2000, with both IE7 and FF1.5.
    Any ideas? Thanks!
    Paul

    OK, so this definately looks like a bug in Flex / Flash when
    running on 256 color displays.
    Really simple Flex projects that contain nothing but images
    like:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="
    http://www.adobe.com/2006/mxml"
    layout="vertical">
    <mx:Image source="
    http://domain/image1.gif"
    />
    <mx:Image source="
    http://domain/image2.jpg"
    />
    <mx:Image source="
    http://domain/image3.png"
    />
    </mx:Application>
    Don't show anything at all, but if you throw in a few images
    via a Text control such as:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="
    http://www.adobe.com/2006/mxml"
    layout="vertical">
    <mx:Text width="450" height="75"><mx:htmlText>
    <img src="
    http://domain/image1.gif"
    />
    </mx:htmlText></mx:Text>
    <mx:Text width="450" height="75"><mx:htmlText>
    <img src="
    http://domain/image2.jpg"
    />
    </mx:htmlText></mx:Text>
    <mx:Text width="450" height="75"><mx:htmlText>
    <img src ="
    http://domain/image3.png"
    />
    </mx:htmlText></mx:Text>
    <mx:Text width="450" height="75"><mx:htmlText>
    <img src="
    http://domain/image1.gif"
    />
    </mx:htmlText></mx:Text>
    <mx:Text width="450" height="75"><mx:htmlText>
    <img src="
    http://domain/image2.jpg"
    />
    </mx:htmlText></mx:Text>
    <mx:Text width="450" height="75"><mx:htmlText>
    <img src="
    http://domain/image3.png"
    />
    </mx:htmlText></mx:Text>
    <mx:Image source="
    http://domain/image1.gif"
    />
    <mx:Image source="
    http://domain/image2.jpg"
    />
    <mx:Image source="
    http://domain/image3.png"
    />
    </mx:Application>
    Then all of the images will appear - all of those embedded
    into the Text controls, as well as those embedded into the Image
    controls. Note, it seems that there needs to be "significantly"
    more Text controls than Image controls for this to work... but I
    haven't really narrowed that down.
    Also, when the Text controls are not used, it seems that
    popping up Alert boxes cause the images to display correctly until
    the dialog box is dismissed, and then the Image controls disappear
    again!
    Finally, I've found that I can get the Image control to work
    reliably (so far) by itself, if I simply set the height or width to
    be at least one pixel less than (not greater than) the real image.
    So, for example, my image is 450 pixels wide, by 75 pixels
    high. So, of the following four Image controls, only the last one
    works!
    <mx:Image source="
    http://domain/image1.gif"
    />
    <mx:Image width="450" height="75" source="
    http://domain/image1.gif"
    />
    <mx:Image width="451" height="75" source="
    http://domain/image1.gif"
    />
    <mx:Image width="449" height="75" source="
    http://domain/image1.gif"
    />
    Once again, all of these behaviours only occur when the
    display is set to a 256 color mode. Everything works as expected on
    15bit+ color modes.
    So, I guess I should file a bug report now?
    Paul.

  • Unable to execute runInstaller: Check if the DISPLAY variable is set

    I am unable to run the Oracle Installer (runInstaller) on my Solaris10 client (Windows Vista PC). The IP address of my PC is 192.168.0.191 and the IP address of the remote Sun server (from which I am invoking the runInstaller) is 192.168.0.192.
    COULD ANYONE PLEASE HELP ME WITH THE FOLLOWING ERROR. Thank you in advance.
    Database server machine: Solaris 10
    Client machine: Windows vista
    Connected via: SecureCRT with X11 packet forwarding enabled
    ---( ERROR )-----------------------------------------------------------
    oracle@pvsparc$ id -a
    uid=100(oracle) gid=102(oinstall) groups=102(oinstall),100(dba),101(oper)
    oracle@pvsparc$
    oracle@pvsparc$ echo $DISPLAY
    192.168.0.191:0.0
    oracle@pvsparc$
    oracle@pvsparc$ ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
    Passed
    Checking Temp space: must be greater than 250 MB. Actual 2073 MB Passed
    Checking swap space: must be greater than 500 MB. Actual 2160 MB Passed
    Checking monitor: must be configured to display at least 256 colors
    >>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
    Some requirement checks failed. You must fulfill these requirements before
    continuing with the installation,at which time they will be rechecked.
    Continue? (y/n) [n]
    -------------------------------------------------------------------------------

    I don't know XMing, but for CygWin, you have to use a Cygwin windows to enable the XClient, not an external tool. Did you use the XMing tool windows, or did you continue with SecureCRT ?
    Steps for Cygwin :
    1. install from http://cygwin.com/setup.exe
    2. choose installation from internet
    3. the following server worked for me http://cygwin.cybermirror.org
    4. ensure the following packages are check :
    xorg-x11-base (2 KiB; required, automatically selects a base set of packages for the typical installation)
    xorg-x11-bin (1.2 MiB; optional, executables for xterm, twm, etc.)
    xorg-x11-bin-dlls (2 MiB; optional, libraries (DLLs) for executables.)
    xorg-x11-bin-lndir (5 KiB; optional, lndir program, useful for developing)
    xorg-x11-devel (964 KiB; optional, additional files needed to compile programs for Cygwin/X)
    xorg-x11-etc (335 KiB; required, configuration files for the X Server and programs in xorg-x11-bin)
    xorg-x11-f100 (12 MiB; optional, 100 dpi fonts (75 dpi fonts are used by default))
    xorg-x11-fcyr (368 KiB; optional, Cyrillic fonts)
    xorg-x11-fenc (489 KiB; required, font encodings)
    xorg-x11-fnts (16.4 MiB; required, 75 dpi fonts)
    xorg-x11-fscl (2.2 MiB; optional, Speedo and Type1 scalable fonts)
    xorg-x11-fsrv (201 KiB; optional, X Font Server)
    xorg-x11-libs-data (154 KiB; required, X11R6/lib/ files)
    xorg-x11-man-pages (551 KiB; optional, man pages)
    xorg-x11-man-pages-html (596 KiB; optional, man pages in html format)
    xorg-x11-nest (1.1 MiB; optional, Xnest nested X Server)
    X-start-menu-icons (4 KiB; optional, adds icons for X Clients to the Start menu)
    X-startup-scripts (22 KiB; required, example X Server and client startup scripts)
    xorg-x11-vfb (1.2 MiB; optional, X Virtual Frame Buffer (Xvfb) server)
    xorg-x11-xwin (1.3 MiB; required, the Cygwin/X X Server)
    xorg-x11-xwin-gl (761 KiB; optional, the Cygwin/X X Server with ***EXPERIMENTAL*** GLX acceleration)You may also want to ensure that the inetutils and openssh packages are selected if you wish to use telnet and ssh to connect to remote machines.
    5. open the Cygwin icon on your desk
    6. run the following command in the new opened window (a DOS window command) :
    sh /usr/X11R6/bin/startxwin.sh7. from the new window (a X window session), run
    ssh -Y RemoteServerIPaddress8. test by runing a xlock command
    Nicolas.

  • Ipad 2 color display

    Hi i need some help please. My ipad 2 fell on the ground, before it seems okay but after a while, the color display start having problem. I dont know exactly what to do. I just want it to be back to its normal color. It seems it has liquid inside that makes the color display scattered. What seems to be the problem? Can it still be fixed?

    Welcome to the Apple Support Communities
    Open Settings > General > Accesibility and turn off Invert Colors

  • Help needed in setting up Japanese Database

    Hi there,
    Help needed in setting up Japanese Database.
    I created database with UTF8 character set on Sun Solaris O/S.
    Oracle version 8.1.7.
    I am accessing the DB through SQL*Plus (Windows client).
    I downloaded the Japanese font on client side and also set the NLS_LANG environment variable to Japanese_Japan.UTF8. Still, I am not able to view Japanese characters. O/S on client side is Windows 2000 professional (English). Is O/S (client) need to be Japanese O/S? When I try to retrieve sysdate, its displaying in Japanese but not all characters in Japanese. Can anyone help me out how to set up the client and is there any parameters to be setup at server side? I also tried to insert japanese characters into table through client, but it displaying as "?????" characters. Any help in this regard is appreciated.
    Thanks in advance,
    -Shankar

    lol
    your program is working just fine.
    do you know what accept does? if not read below.
    serversocket.accept() is where java stops and waits for a (client)socket to connect to it.
    only after a socket has connected wil the program continue.
    try putting the accept() in its own little thread and let it wait there while your program continues in another thread

  • HT5622 I have just received a new iphone 5s and need to set the Apple ID with my work email.  I used my work email on my personal iphone 4s to set up an icloud account and it will not let me use my work email as the Apple ID on my new iphone. What do I do

    I have just received a new iphone 5s and need to set the Apple ID with my work email.  I used my work email on my personal iphone 4s to set up an icloud account and it will not let me use this email as the Apple ID on my new iphone.  As it is a work phone I need to use this email address as my Apple ID.  How do I do this?

    when you open the app store scroll down to the bottom it will display the apple id currently in use, change it to your normal apple id email

Maybe you are looking for