Inverting newsletter copy to meet PO regs

I prepared a one-page, printed two sides, newsletter in Microsoft Word 2007 using one of many available newsletter templates. It is designed to be a self mailer. How do I invert just one side of the page? Postal regs require that I do so. (Once I have completed this step, I will save it as a PDF for the printer.) When I use one of the symbols to invert the Word file, both sides of the page invert.)

U have 2 options.
Directly do the rejection through the QM module.
or
if u want to do it through the return PO rescenario then.first make the usage decision as 100% acceptance the all ur material will come to the 'unrestricted stock' then create Po and return the unrestricted stock to vendor.
regards,
SNB

Similar Messages

I write a newsletter...in order to add the previously saved articles to the form, I am forced to use the form as a draft in order to go back and forth. Extremely irritating and awkward. please help

The newsletter is for nurses. I save "blurbs" from articles w' the link all month long. I then pull up the form for the newsletter and (while on AOL) I used to diminish the form copy the "blurb" and enlarge the form and paste the article. Although this sounds awkward, it was relatively easy and quick. I then posted the completed Newsletter form on our website.
However, since I acquired DSL and using Firefox.....I am in a quandary. I can not do as I have previously done. I am forced to make a draft of the Newsletter, copy the ''blurb'' , pull up the draft and paste , then save the draft. Very very awkward and and can become confusing if interruptions take place. Then, send a notice BCC to segments of 10 members or more (there are about 800 members) that the newsletter is posted. What an ordeal. I finally figured out to make the roster a 2nd draft and the form letter a 1st draft. Saving each over and over. Exhausting. The Notice is monthly....

The diagram was supposed to look more like this......
Internet ---------TIME CAPSULE(containing all files) --------WD 2T Harddrive
                                            I
     I                           I                          I                            I                                   I
Macbook Pro         iMac                 HP (PC)            OLD Macbook Pro           iPhone
Sorry!
Regards
Joe

Time zone issue when copying Outlook/Mac invitation to iCal or adding it via iPhone/iPad calendar

Hello everyone,
I'm facing a situation when every time I receive an invitation comes from a different time zone neither iCal, iPhone’s Calendar nor iPad’s Calendar recognizes it correclty.
Below there are a couple of examples, but before, a few information about my environment: Mac OS X Lion with Outlook for Mac (non-exchange user), I’m using iCloud, and my iPhone and iPad are running iOS5. And BTW, I’m not intending to sync anything with Outlook… I know it does not support iCloud syncing, I just trying to live without that.
First example.
I got an invitation to a meeting on Monday 5pm-6pm CET, but I’m in GMT-2. It should appear to me as an event to occur on Monday2pm-3pm (GMT-2). In fact only Outlook shows the right time, however when I dragged and dropped that appointment from Outlook’s calendar to iCal it was copied but is did not consider the time zone, that means in the iCal, the appointment was set to occur from 5pm-6pm (GMT-2), instead of 2pm-3pm (GMT-2).
Second example.
I created an appointment in Outlook by myself, jsut to check if that would be something related to the senders’ computer (Outlook/Windows user), then I set that meeting to occur on Friday 5pm-6pm (UTC+1) and I sent an invitation to a friend of mine (Outlook/Mac User). In my Outlook the appointment was created correctly, that means, on Friday 2pm-3pm (GMT-2), however, when I copied that meeting to iCal it did not consider the time zone, appearing to be Friday 5pm-6pm (GMT-2), and when my friend opened the invitation in his iPhone, which is also set as GMT-2, that also appeared to him as a meeting on Friday 5pm-6pm (GMT-2).
I also checked all possible time zones configurations, in the iPhone, iPad, iCloud and in my MacBook (iCal and Outlook)…all time zones are enabled and configured as GMT-2.
As an last shoot, I decided to download a third-party software, which is integrated with iCal and iCloud, in order to check if that could be an Apple’s issue. I downloaded and installed the BusyCal (from BusyMac). And guess what?! When I dragged & dropped the same meetings I described above from Outlook to BusyCal, it worked perfectly!! And BusyCal sent the proper information to iCal and my iPhone/iPad over iCloud. Which means: #1 there would be no issue with my configurations, and #2 BusyCal does really takes into consideration time zones, which is something that Apple’s calendars looks like do not.
It will not solve the issue I'm having with my mobile devices, but at least is a workaround… BTW, an expensive workaround, because BusyCal costs $49, by now I’m using the 30 days trial version.
So friends, is there anyone who could help to find a real solution J , or at least, a free workaround L
Thank you in advance and I apologize for this “article”.
PS: I've been using Mac for 4 years now, and this is the first time I was stucked ina situation like that... and I don't know who to blame... Microsoft or Apple? This I know... syncing Apple's calendars with Microsoft's calendars, should be effortless... and it is always a pain in... that place...

I am having a similar problem: invitations sent (presumably from outlook), when accepted from my iPad, appear in the calendar with the wrong time zone.
this actually happens even when the meeting is in the same time zone I'm in: I am in GMT -5, and even when the meeting is in GMT-5, it defaults to GMT (or, in some instances, PST). My settings have my time zone set correctly.
Any help much appreciated.
PS: Using iPad original wit iOS5

Modifying the Collaboration Meeting Room

Hello,
I am running EP 7.0 (Netweaver 2004s) SPS 9. I copied the meeting room template and created my own version. Then I took that meeting room template and used it to create a test meeting room.
My problem is that now that I have the room, I would like to personalize by putting some sort of graphic in it. I would like to do that in the iview that comes up at the top of the page that identifies the meeting room name. I cannot seem to find where/how to do that. Can I do that at the room level or do I have to do that at the room template level?
Any help would be appreciated as I am a novice without any formal training.
Thanks
Angie

Perhaps, I need to clarify what I am trying to accomplish. I created a room template, then I created a room from that template. It is a meeting room. I am trying to figure out a way to change the roominformationextended iview so that I can include a customized image.
What is the way to do this?
Thanks
Angie.
Edited by: Angie Radjen on May 11, 2009 3:42 PM

How to move or copy the Package - Urgent Please

Hi,
I have created all my data elements, screens, database tables in my own package - zanns_school, at my lab. I want to carry them to my home SAP System. Systems are neither in LAN, WAN.
I want to copy all the contents of my package in an external drive and again reload all of those objects of my package at my home SAP PC.
Please suggest and assist at the earliest

Hi,
You can't do that,
SAP objects cant be copied from one place to another.
Only thru transport it can be availbale from one client to another,Its not like java or some other files u can copy and past.
Regs
Manas Ranjan Panda

User Exit to copy Sales order data to Billing Doc

Hi,
I want a User Exit to copy a particular field value from sales order to Invoice.
The field which I am copying is STCEG(VAT Reg number)..
I am using the exit
USEREXIT_FILL_VBRK_VBRP but I am not able to acheive my solution.
Is there any other way other than copy croutines with USER EXITS.
Thanks.

That's strange. SAP documentation says:
"This user exit is only called when the billing document is created. It is used to provide the header and the item of the new billing document with deviating or additional data."
Check you code. In debugger, set a watchpoint on VBRK-STCEG and check why the value gets lost.
Regards
Clemens

Error "you cannot copy an enterprise vault shortcut" in outlook 2007 calendar

I am trying to copy a meeting from a calendar in outlook 2007 that my co-worker has shared with me over to my calendar. I used to be able to just drag and drop it on my calendar and it would make a copy. Now every time I try to copy anything I get this
error "you cannot copy an enterprise vault shortcut" you can restore the item and then copy the restored item. Why am I getting this and how can I stop it or even how can I "restore" the item and get around it.

If your organisation uses the Symantec Enterprise Vault product, this seems to be a known issue:
http://www.symantec.com/business/support/index?page=content&id=TECH143955
You should have your email administrator check into this with Symantec (it's not a Microsoft product issue)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Adobe Download Assistant Will Not Recognize My Adobe ID

I've been an Adobe customer / forum user since before ID's were tied to email addresses. My product registrations going back to 1996 through CS 5.5 apps are recorded under that ID. Since I have to change my email address every couple years to escape spammers, I do not want to change my Adobe ID (and go through the hassle of re-recording the record of registered apps) to a "fluid" ID like an email address.
Automatic registration and now Adobe Download Assistant will not accept an Adobe ID that is not an email address, yet I can still use it to 'manually' register new / upgrade product purchases. The problems this poses are two-fold:
Since I can only manually register new / upgrade products, I cannot obtain any "registration bonus" downloads.
I cannot download trial versions of apps I want to check out.
Adobe needs to get its act together and tell its gen-X / Millenials / Kid Web and software development staff that not all Adobe IDs are email addresses, but might also be a unique user ID string.
Further, due to an individual's email address volatitility (virtually everyone in my email address book had their email address change every 2- 3 years due to ISP demise, merger, personal relocation, job change etc.), Adobe should return to - or at least give precedence to - the model of UID / PW authentication instead of email address / PW authentication. This would lower Adobe maintenance effort / cost for user accounts as one could simply sign in with UID + PW and change email address for the account as necessary. As it is now, Adobe CANNOT deal with a user whose email address changes.
When Adobe changed from UID precedence to email precedence, I could not register Acrobat Pro (2007) during registration so I used my email address at that time to register the product. When that email address ceased to exist, I tried to get Adobe to transfer that registration to my old [non-email address] Adobe ID, and, over several months of email exchanges, they ended up admitting they could not do it. I could not make the change as the SN was already marked as used in there system so simply re-registering it to my existing account wouldn't work either.
This has been an ongoing issue with "legacy" users since 2006 at least, and NEEDS TO BE RESOLVED ASAP!!!!
Wayne M Cole AGCV CSCV, CLVI
Proprietor
IHP Legal Video Service
Infinity Heart Producfions,
Contributing Editor,
Government Video Magazine

There you go MISSING THE POINT AGAIN!! My Registered products WILL NOT FOLLOW MY UID IF I CHANGE IT, NEVER DID SINCE 2007. Saying the will is false information which I alerted Adobe to back in 2007 and is a problem y'all never fixed.
Just a little over a week ago, I got I got LightRoom 4 ug from a LR 3 I had purchased in March. Signing on with my legacy UID (non-email) allowed me ADD those registrations to my account, as I had cor CS 5.5, 4, 3, etc. etc. Now, isn't it odd that the very day after I posted here, when I sign in to my account it shows NO REGISTERED PRODUCTS!!! If I look at my order history, it has orders from Adobe store from last weeks CS6 MC purchase back to 2007 when I started buying from Adobe directly after the local brick and mortar resellers disappeared.
So I try to register CS6 MC, it tells me the SN is already in use. I try open a PDF document and it tells me I have to first register and agree to the Acrobat Pro X license before I open a doc - and it was an UPGRADE FROM CS 5.5 MC. I try to run CS 5.5 apps and they tell me I have to purchase a license since the trial period is over - HUH! Until I posted here it was working FINE. I go back to my acccount (non-email UID sign in) and check my profile - Lo and behold SOMEONE (not me) has changed the UID to an email address instead of the non-email UID I sign in with AND DELETED ALL MY PRODUCT REGISTRATIONS!
Naturally, your software does not let me put it back to the same UID I use to sign on with so THE LINK TO ALL MY REGISTERED PRODUCTS IS GONE, I CANNOT REGISTER NEW ONES (which was no problem just a day or two before posting here) WHICH PROVES WHAT I WAS TOLD IN 2007 - WHEN YOU CHANGE UID'S YOUR LEGACY REGISTRATIONS WILL BE LOST!!!
So, in summary you (Adobe at least, and I suspect you personally) went in and messed with my legacy account, deleting all my registrations, as I was told in 2007 would happen and advised to keep the old UID if I did not want to blow away those registrations, when I explicity did NOT want to make such changes. And, should I need an SN for some upgrade offer or to install an update for an older product that I did not transition to the new facility, I have to HOPE that I had I can find the original purchase invoice and that there is a copy of the SN / Reg card attached to it.
THANKS A PANT LOAD!!

Lync and Windows 8.1 App as Guest

Hi,
I installed the Lync App in Windows 8.1
I'm trying to join a meeting as a guest, but when I put the link in, the Guest boxes just go blank.
Any ideas?
John

Hi John,
To narrow down the issue, you could try reinstalling Lync App or join the meeting with IE (copy the meeting link to IE and add ?sl=1).
For example:
https://join.microsoft.com/meet/xxx/4ZUHHYCZ?sl=1
Hope it can be helpful.
Best regards,
Eric

How to apply style to partial text within a tag in xml file

I have created a webpage using Dreamweaver CS4 Spry Regions. Everything is functioning as expecting, however now I need to apply a style to part of the text. Every occurance of the company name needs to be in italics - the problem is that the company name appears within different parts of the text within a set of tags.
http://www.certifiedangusbeef.com/private1/sales/facts/index.php
ie - <description> this is my company name which must appear in italics</description>
In this example, only "company name" needs to be italicized. We have created an XSL file that applies the italics properly when the XML file is viewed in the browser. But it does not have any effect on the final web page - as though spry is blocking the XSL or we've missed a step in linking all the files together.
Here's the XSL code:
<?xml version="1.0" encoding="utf-8"?><!DOCTYPE xsl:stylesheet [
<!ENTITY nbsp   " ">
<!ENTITY copy   "©">
<!ENTITY reg    "®">
<!ENTITY trade "™">
<!ENTITY mdash "—">
<!ENTITY ldquo "“">
<!ENTITY rdquo "”">
<!ENTITY pound "£">
<!ENTITY yen    "¥">
<!ENTITY euro   "€">
]>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
    <xsl:template match="node()|@*">
        <xsl:copy>
            <xsl:apply-templates select="node()|@*"/>
        </xsl:copy>
    </xsl:template>
    <xsl:template match="text()[ancestor::description]" name="replace">
        <xsl:param name="pString" select="."/>
        <xsl:choose>
            <xsl:when test="contains($pString,'Certified Angus Beef ®')">
                <xsl:value-of select="substring-before($pString,'Certified Angus Beef ®')"/>
                <i>Certified Angus Beef<sup> ®</sup> </i>
                <xsl:call-template name="replace">
                    <xsl:with-param name="pString"
                    select="substring-after($pString,'Certified Angus Beef ®')"/>
                </xsl:call-template>
            </xsl:when>
            <xsl:otherwise>
                <xsl:value-of select="$pString"/>
            </xsl:otherwise>
        </xsl:choose>
    </xsl:template>
    <xsl:template match="text()[ancestor::item]" name="replace1">
        <xsl:param name="pString" select="."/>
        <xsl:choose>
            <xsl:when test="contains($pString,'Certified Angus Beef ®')">
                <xsl:value-of select="substring-before($pString,'Certified Angus Beef ®')"/>
                <i>Certified Angus Beef<sup> ®</sup> </i>
                <xsl:call-template name="replace">
                    <xsl:with-param name="pString"
                    select="substring-after($pString,'Certified Angus Beef ®')"/>
                </xsl:call-template>
            </xsl:when>
            <xsl:otherwise>
                <xsl:value-of select="$pString"/>
            </xsl:otherwise>
        </xsl:choose>
    </xsl:template>
</xsl:stylesheet>

An element attribute is set with the method
setAttribute(String name,
                         String value)or the
setAttributeNode(Attr newAttr)method.

Code modification...urgent

hi experts,
i am new to enhancement and modifications.
can anybody tell me
1.is the term modification and code modification one and the
   same?or different?if so,
2.what is code modification?
3.how do u do code modification?
4.adv. and disadv. of code modifications?
i appreciate if u provide links also.
thanks in advance.

Hi
Explicit Enhancement Options
There are two types of explicit enhancement options: Source code enhancements with source code plug-ins and BAdIs:
        Explicit enhancement options of the source code enhancement type allow you to insert source code plug-ins. These are lines of code that are executed if the source code enhancement option is inserted in the code with the Enhancement Point command. Source code enhancement options with the Enhancement Section command behave the same, except that the source code plug-in replaces the section in the original code. Therefore, you are not only able to enhance the original code, but can also flag specific code sections (as enhancement sections) so that other developers can replace these sections with other code without making modifications.
        Business Add-Ins (BAdIs) are hangers for object plug-ins. A BAdI definition comprises an interface with methods. BAdIs are enhanced by classes that implement the BAdI interface. If you instantiate a BAdI and then call its methods, you can, among other things, specify which method implementations are to be carried out on the basis of filter values. In other words, a BAdI method call is a dynamic method call with a specified interface, for which it is not determined until runtime which method implementations are to take place.
In the case of source code enhancements, the definition and call coincide. You define BAdIs once in the BAdI Builder and can then call them at different points in the various compilation units.
Implicit Enhancement Options
Implicit enhancement options are fixed points in compilation units that is, points that remain intact even if the code is changed. This is important for the following reason: If the location of an enhancement is moved, you have to check manually after an upgrade whether the enhancement is still at the correct point and replace it if necessary. The following are implicit enhancement options at which enhancements can always be inserted:
        You can always insert source code plug-ins before the first and the after the last line of includes, methods, reports, and function modules.
        You can always add further optional parameters to function modules.
        For global classes, there are different permanent, implicit options for enhancements: You can insert additional attributes or methods, and you can add optional parameters to existing methods
Customer-Specific Modification and Enhancement Possibilities
Use
The following documentation provides an overview of the customer-specific modification and enhancement possibilities in the IS-H System. Note that to implement enhancements, you require ABAP programming knowledge.
Features
The IS-H system provides the following technical possibilities for customer-specific modifications and enhancements
Business Add-Ins (BAdIs)
   If default code (standard procedure defined by SAP) exists for the BAdI, please note it will be overwritten when you implement the BAdI. You can, if required, re-use the default code in your implementation.
As of SAP NetWeaver 2004, the enhancement concept of the ABAP Workbench (Enhancement Framework) is available for BAdIs. Note that SAP Patient Management contains BAdIs that use the Enhancement Framework as well as the classic BAdIs.
Customer Exits (transaction SMOD)
If SAP delivers sample code for the customer exit, you can access it when implementing the exit by choosing Goto ® Sample Code. You can re-use the sample code using Copy&Paste
User Exits from the IS-H Implementation Guide: Basic Settings ® Configuration/Systems/Events ® Display SAP User Exits.
To implement the IS-H user exits, copy the function module delivered by SAP into a customer-specific function group. The name of the function module delivered by SAP is specified in the table you call in the IS-H Implementation Guide by choosing the path specified to the left here.
Once youve copied the source code, you can modify this copy to meet your needs. Note that you must not modify the interface of your own function module.
Now enter the name youve chosen for the function module in the customer table. You access this table by choosing Basic Settings ® Configuration/Systems/Events ® Configure Customer User Exits.
If it is helpful rewards points.
Regards
Pratap.M

The e-mail account does not exist at the organization

Hi, I have a user account that people receive the following message from:
The e-mail account does not exist at the organization this message was sent to. Check the e-mail address, or contact the recipient directly to find out the correct address.
<mailserverishere #5.1.1>"
I'ved looked and this particular case could be a quirky one.
The details are:
User account A is the account that Exchange thinks doesn't exist.
User account B is her boss.
A copy of user B's email is sent to A. (done through Delivery Options)
Senders sometime receive an email back saying user A's address doesn't exist.
(which really confuses them because they sent the email to B)
This is the only time the bounce message appears.
I've removed the forward and added it again. Still the problem.
Any clues?

You need to verify old delegates in UserB's mailbox by going to Tools -> Options -> Delegates. Remove old UserA and re-add it.
This is because of option “Delegates receives copy of meeting-related mails sent to me” is ticked with old UserA id in Delegates.
If you can't see any delegates then you have another option to delete delegates rule with MFCMapi.
- Open UserB's Mailbox with MFCMapi where UserB's outlook profile configured in online mode (not Cache mode)
- Double click the Mailbox of userB to open.
- Expand Root Container -> Top of the information store -> Inbox folder
- Right-click the "Inbox" folder, and then click "Display Rules Table".
- You can see all rules configured in mailbox.
- Delete the Delegate Rule with "PR_RULE_PROVIDER" column property shows "Schedule+EMS Interface". (this is the same option which you can set with GUI Delegation "Delegates receives copy of meeting-related mails sent to me" but stale copy is still in mailbox.)
THANK YOU! Amit Tank

Can I use some JavaScript in an XSLT stylesheet?

I have two related (I think) problems.
I am using Dreamweaver CS4 in Windows XP, Service Pack 3.
I have created an XSLT stylesheet that transforms a simple XML file into HTML. I have a very short JavaScript that writes the day's date into the document. It is a script that I have used in many other HTML pages. The XSLT stylesheet also has a Spry widget, an accordion, in one of its DIV elements. Originally, I developed the accordion as part of a Dreamweaver template, and it works fine there. I cannot get the scripts to work completely in Firefox and Internet Explorer.
If I just link in the external JavaScript files, the XML document displays correctly in both browsers. Note that MY external JavaScript file is the definition of one function, today(). The other JavaScript file is the Spry js file for the accordion widget. Of course the widget displays, but is not functional.
If I add the script to display the date (document.write(today()); document.close();) in one of the DIVs, Internet Explorer(7) displays the date correctly in the correct location AND displays all the other content correctly, including the accordion, which of course is not functional. However, FireFox (latest version) displays ONLY the date in a white background and NOTHING else, such as background image, other DIVs with content, the accordion widget, etc.
If I add the script to instantiate the accordion widget, FireFox displays the date and nothing else, as before. Internet Explorer displays the date, the other content, and the accordion widget, as before, but the widget is still not functional, that is, the accordion does not close or open when the panels are clicked.
So, do I have to be extra careful on where I place scripts in an XSLT? Or is there some reason why scripts in an XSLT file do not work? It seems that once the browser transforms the XML file into HTML, which includes the scripts, it should display correctly.
Thanks,
Van

Not sure what you mean by a CDATA section. But here is the XSLT file showing the template for the root element. The script is included using a <script> element, inserted in the <head> element. Should it be some place else?
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE xsl:stylesheet [
    <!ENTITY nbsp   " ">
    <!ENTITY copy   "©">
    <!ENTITY reg    "®">
    <!ENTITY trade "™">
    <!ENTITY mdash "—">
    <!ENTITY ldquo "“">
    <!ENTITY rdquo "”">
    <!ENTITY pound "£">
    <!ENTITY yen    "¥">
    <!ENTITY euro   "€">
]>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="html" encoding="utf-8" doctype-public="-//W3C//DTD XHTML 1.0 Transitional//EN" doctype-system="http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"/>
<xsl:template match="/">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
<title><xsl:value-of select="MovexUser/Title"/></title>
<script src="SpryAssets/SpryAccordion.js" type="text/javascript"></script>
<link href="resources/navigatorSpryAccordion.css" rel="stylesheet" type="text/css" />
</head>
<body id="body">
--- The JavaScript funtions are called inside DIV elements here. ---
</body>
</html>
</xsl:template>
</xsl:stylesheet>

Help with RSS feed in home page

I'm trying to place an RSS feed in my home page. I've
followed this Dev
Center guide:
http://tinyurl.com/ewbdv
I've gotten everything to work perfectly locally. However,
when I upload
the files it won't work online here:
http://tinyurl.com/ootyn
The error I receive is:
Could not find the ColdFusion Component
burnettcom.includes.MM_XSLTransform.MM_XSLTransform.
Please check that the given name is correct and that the
component
exists. The error occurred in
C:\domains\burnettcom.com\wwwroot\home.cfm: line 28
26 : 
27 : <cfinvokeargument name="xml"
value="
http://www.burnettcom.com/blog/?feed=rss2">
28 : <cfinvokeargument name="xsl"
value="headlines.xsl">
29 : </cfinvoke></div>
Instead of the path
burnettcom.includes.MM_XSLTransform.MM_XSLTransform.
shouldn't it be
burnettcom/includes/MM_XSLTransform/MM_XSLTransform.cfm
This is the only thing that I can see that would be wrong.
Can anyone help me to get this to work online?
Thanks in advance.

Thanks A3gis, I just got that part working. I've configured
it to
display the title and date for each post.
The only problem is that the date appears as:
Tue, 18 Jul 2006 04:38:07 +0000
I would prefer the date to appear as:
July 18, 2006
or
6.18.06
Does anyone know how to make this work?
P.S. Here's the xls file:
P.S. my XSL fragment is:
<?xml version="1.0" encoding="iso-8859-1"?>
<!DOCTYPE xsl:stylesheet [
<!ENTITY nbsp " ">
<!ENTITY copy "©">
<!ENTITY reg "®">
<!ENTITY trade "™">
<!ENTITY mdash "—">
<!ENTITY ldquo "“">
<!ENTITY rdquo "”">
<!ENTITY pound "£">
<!ENTITY yen "¥">
<!ENTITY euro "€">
]>
<xsl:stylesheet version="1.0"
xmlns:xsl="
http://www.w3.org/1999/XSL/Transform"
xmlns:wfw="
http://wellformedweb.org/CommentAPI/"
xmlns:content="
http://purl.org/rss/1.0/modules/content/"
xmlns:dc="
http://purl.org/dc/elements/1.1/">
<xsl:output method="html" encoding="iso-8859-1"/>
<xsl:param name="ItemsPerPage" select="10" />
<xsl:template match="/">
<xsl:for-each select="rss/channel/item[position()
<= $ItemsPerPage]">
<xsl:sort select="dc:date" order="descending" />
<p>
<a href="{link}"><xsl:value-of select="title"/>
</a><br />
<xsl:value-of select="pubDate"/>
</p>
</xsl:for-each>
</xsl:template>

RSS Feeds on a webpage

Hi DW people am trana have feeds from many different sources included on pages in the website that I am working on.
What I want to achieve: I am looking to have one row with three columns that display the feed headlines in a 220px by 220px div container (you know all those headlines with pics). So am also trana make each container display like 5 headlines each from one source(usually feeds providers have more than one headline sometimes up to 20)
So far I have created an XSLT Fragment and I have an XML data source binded to it. The thing is when it is displayed in the browser I have no control over it ie it just lists out all the feeds in several rows from the top of the page to the bottom. Then when I tried giving it some style to make it align in a row they just overlap one on top of the other.
When I tried including the Fragment on my dynamic page DW automatically created MM_XSLTransform.class.php file and attached it to my page. I dont want to bore anyone but I have issues with this particular MM_XSLTransform.class.php file. I have tried including some functions of my own in it so as to give it more capabilty but really its a very long story...
I have also experimented with Spry but then without the XSL style it just gives the raw data as output in the browser. When I tried having the XSL style along with the Spry it gives several errors at the start of the page like so:
( ! ) Deprecated: Function set_magic_quotes_runtime() is deprecated in C:\wamp\www\parseXMLs\includes\MM_XSLTransform\MM_XSLTransform.class.php on line 208
( ! ) Deprecated: Function set_magic_quotes_runtime() is deprecated in C:\wamp\www\parseXMLs\includes\MM_XSLTransform\MM_XSLTransform.class.php on line 215
at the bottom list out the feeds!!!!
The error appears on several lines (listing them all out here wont make sense).
Am using DW CS4 on a windows 7 OS..
Pls DW people I need some help with this one.. Speedy and valid response appreciated

Oh my ...
U really did this for me ?... I appreciate it SIR ... U even put my screen name up on the site.. Wow now I feel popular.. Thank u for all the hard work that u put into this. I really appreciate it..
Where did the images go? And they do not link to the full story...
U know wat this is my code.. I hope it gives a clear picture of wat I have been battling wt. See Below
On page where feeds are to appear:
<?php
//XMLXSL Transformation class
require_once('MM_XSLTransform.class.php');
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
a:link{
    font-weight:100;
    color: #009;
    font-size:16px;
a:link img{
    border:none;
a:hover{
    font-size:17px;
    text-decoration:none;
    color: #966;
a:visited{
    text-decoration: none;
    font-size:15px;
a:visited:hover{
    font-size:17px;
    text-decoration:none;
    color: #963;
#footer {
    padding: 0 10px;
    background:#DDDDDD;
#footer #contentTickerarea1{
    overflow:hidden;
    margin: 10px auto;
#contentTickerarea1 #headline1{
    margin-left:10px;
    float:left;
    width:200px;
    height:150px;
#contentTickerarea1 #headline2{
    margin-left:10px;
    float:left;
    width:200px;
    height:150px;
#contentTickerarea1 #headline3{
    margin-left:10px;
    float:left;
    width:200px;
    height:150px;
#contentTickerarea1 #headline4{
    margin-left:10px;
    float:left;
    width:200px;
    height:150px;
#footer #contentTickerarea2{
    overflow:hidden;
    margin: 10px auto;
#contentTickerarea2 #headline5{
    margin-left:10px;
    float:left;
    width:200px;
    height:150px;
#contentTickerarea2 #headline6{
    margin-left:10px;
    float:left;
    width:200px;
    height:150px;
#contentTickerarea2 #headline7{
    margin-left:10px;
    float:left;
    width:200px;
    height:150px;
#contentTickerarea2 #headline8{
    margin-left:10px;
    float:left;
    width:200px;
    height:150px;
#footer #related{
    margin:15px auto;
#footer #Botads{
    margin: 10px auto;
#Botads #boxAds{
    overflow:hidden;
    margin: 5px auto;
#boxAds #botAd1{
    margin-left:10px;
    float:left;
    width:200px;
    height:150px;
#boxAds #botAd2{
    margin-left:10px;
    float:left;
    width:200px;
    height:150px;
#boxAds #botAd3{
    margin-left:10px;
    float:left;
    width:200px;
    height:150px;
#boxAds #botAd4{
    margin-left:10px;
    float:left;
    width:200px;
    height:150px;
#botbannerSpace{
    margin: 5px auto;
    width:600px;
    height:100px;
#footer #siteStats{
    margin: 10px auto;
    height: 60px;
#footer #Botlinks{
    text-align:center;
    margin: 10px auto;
    height: 60px;
#footer #Botlogo{
    margin: 0 2px;
#Botlogo img{
    width:100%;
#footer #BotsocialMedialinks{
    margin:0;
    padding: 1px;
    height:25px;
#footer #copyInfo{
    overflow:hidden;
#copyInfo .copy{
    float:left;
#copyInfo .poweredBy{
    float:right;
</style>
</head>
<body>
<div id="footer">
motorsports Headlines
<?php
$mm_xsl = new MM_XSLTransform();
$mm_xsl->setXML("../XML Files/RSS Feeds/XSLT/newsdocinfo treeGoogle.xml");
$mm_xsl->setXSL("../XML Files/RSS Feeds/XSLT/headlines.xsl");
echo $mm_xsl->Transform();
?>
<div id="contentTickerarea2">
<div id="headline5">
</div>
<div id="headline6">
</div>
<div id="headline7">
</div>
<div id="headline8">
</div>
</div>
<div id="related">
related
</div>
<div id="Botads">
<div id="boxAds">
<div id="botAd1">
</div>
<div id="botAd2">
</div>
<div id="botAd3">
</div>
<div id="botAd4">
</div>
</div>
<div id="botbannerSpace">
</div>
</div>
<div id="siteStats">
</div>
<div id="Botlinks">
</div>
<div id="Botlogo">
</div>
<div id="BotsocialMedialinks">
</div>
<div id="copyInfo">
<div class="copy">
</div>
<div class="poweredBy">
Powered by
</div>
</div>
</div>
</body>
</html>
the XSLT Fragment(created with help from DW), here I use an XML Source from google I saved it to my PC so I dont always have to be on the internet to work wt it :
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE xsl:stylesheet [
    <!ENTITY nbsp   " ">
    <!ENTITY copy   "©">
    <!ENTITY reg    "®">
    <!ENTITY trade "™">
    <!ENTITY mdash "—">
    <!ENTITY ldquo "“">
    <!ENTITY rdquo "”">
    <!ENTITY pound "£">
    <!ENTITY yen    "¥">
    <!ENTITY euro   "€">
]>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="html" encoding="utf-8"/>
<xsl:template match="/">
<div id="contentTickerarea1">
<xsl:for-each select="rss/channel/item">
<div id="headline1">
<xsl:value-of select="description" disable-output-escaping="yes"/>
</div>
</xsl:for-each>
</div>
</xsl:template>
</xsl:stylesheet>
According to the help docs of DW .. It is always good to put the style of the fragment on the dynamic page itself to avoiding giving the servers a hard time.. Incase you asking just how I created the fragment: New->XSLT Fragment-> DW then presents you wt d option of using a local source file or using one from the net.. whichever u choose the schema of the source appears in the Bindings panel...
Then to add this Fragment on the dynamic page.. U open the page in DW.. click Server Behaviors->click the + then click XSL Transformation...
Phew.... Thats a lot of info aint it?
Run my code as it is and see wat happens ... u might have to get ur own source to work wt..
On the dynamic page when u do as I have explained above DW creates a link to the MM_XSLTransform.class.php file ...
I hope all of this helps SIR
Message was edited by: HJWJ

Inverting newsletter copy to meet PO regs

Similar Messages

Maybe you are looking for