INVERTING SCALE LABEL IN XY GRAPH

Hi All
Is there any way to inverse the direction of scale label in xy graph?
If we duplicate Y scale and swap side then the scale label appears in different orientation in the y2 scale (compared to y1)
If y1's label is voltage1 and is appeared frm bottom 2 top then the label of y2 say,voltage2 appears from top to bottom.I want the two scale labels to be identically oriented.Is there any way to do that?
Thanks in advance.

There is a very simple solution : create a free label (use the text tool) and place it over the scale label. A right click will let you choose the label orientation. That what I did on the attached front panel. Of course you'll choose the right back ground color !
Message Edité par chilly charly le 11-23-2007 03:14 AM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Example_FP.png ‏4 KB

Similar Messages

Graph: Scale Legend without Scale Label

Hi!
Is there a way in LabView 8.6 to make Scale Label on Scale Legend invisible ? I'm sure I've done it in an earlier version of LV.
Regards,
Ljubo.
Attachments:
Without_Scale_Label.jpg ‏9 KB
With_Scale_Label.jpg ‏7 KB

Just use a property node for the graph and change "Yscale.namelabel.text", for example as in the image:
Message Edited by altenbach on 07-15-2007 01:08 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
AxisLabel.png ‏2 KB

Numbers '09 : How do I split a label in a graph

How do I split a label in a graph into 2 lines of text. Right now, in the inspector, Axis tab, Category Axis Y, the label is "Asset Value" and shows on 1 line, I want it on 2 lines but there is nothing I can do.
Is there some sort of code within the label that I have to put?
Thanks!

Is this what you want ?
If it's that, just insert a line break in the header thru option + return.
Yvan KOENIG (VALLAURIS, France) vendredi 21 janvier 2011 21:02:48

Can't show data labels in pie graphs as decimal number if the crosstab data

I want to show my data labels in diagrams, as percent values, with three decimals.
It occurs (in version Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26)) it is only possible if the data format of the crosstab data also shows data with decimals. If the data are in integer format, the graphs data labels can only be shown in integer as well.
Does anyone know how to fix the problem?
In version Oracle Business Intelligence Discoverer Plus 10g (10.1.2.48.18) we can have a crosstab showing integers and a pie graph showing labels of pie slices where the labels are in percent with three decimals. It seems it does not work in the newer version Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26)
Thanks in advance

It seems I have another similar problem in version Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26):
I have a Bar (Percent) graph based on a crosstab where the data is formatted as number with two decimals.
The labels in the graph shows as number (0,76 instead of 76% and 0,13 instead of 13%). I want them to be shown in percent format.
The Data Label format is set to “Number” with two decimals. I can change the Data Labels to Percent with two decimals and then it shows the data labels in the graph exactly as I want it. But after I have saved the workbook and then opened it again the changes has been “revoked” and is once again set to number with two decimals instead of percent.
thanks (again) in advance

How to set minimum and maximum X scale in the XY graph if i have a X scale time format ?

Hi,
i choose in the picture enclosed, a time format for the X scale of the XY Graph.
The problem is that i am not able to set the minimum and maximum of the X scale: In fact the property nodes of the minimum and maxinum X scales ask for double as input.
But i need to set my minimum and maximum X scale to be a time (because I already set the X scale format to a time)
Could u help me please ?
Samer,
Attachments:
scale.JPG ‏8 KB

please i have another problem:
i put the XY Graph in a while loop with maximum and minimum Xscale as property nodes inputs.
The problem is that when i make a zoom i can just see the zoom for a little while and then (because of the while loop) the Xscale is updated.
is there a method so that the Xscale be updated just when i change its value ?
or Could u tell me how could i zoom properly ?
Samer,
Attachments:
zoom.JPG ‏11 KB

Add axis label to a graph in word report

Hi,
Is there a way to add an axis label for the graph in a word report? Thanks!
Tom
Solved!
Go to Solution.

I would guess that there is, but it would be a word automation function.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Polar plot scale labels and background colour

Dear Labview Forum,
I am trying to create a polar plot. However when I put the polar
plot indicator on my front panel and wire up some data and parameter
control boxes, the scale labels are missing. See polar plot
basic.VI. Are the scale labels there or are they the same colour
(black) as the background and hence not visible?
When you compare this to the polar plot demo, the background is white and the scale labels are present.
How can I control the polar plot background colour parameter?
How can I control the scale label colour and visibility?
Regards,
Jamie
Message Edited by Jamieg on 01-17-2007 02:18 AM
Using Labview version 8.0
Attachments:
polar plot basic.vi ‏31 KB
Polar Plot Demo.vi ‏33 KB
polar plot basic.vi ‏31 KB
Polar Plot Demo.vi ‏33 KB

I'm so sorry ... i am also unable to find the Propety Node... i think i mistook changing the Label/Caption bg colour as changing the whole bg colour... i'm so sorry...
i've tried searching but to no avail... my apologies...
all the best to your application...
Best Regards,
JQ
LV 8.0 user...

Edit scales without resizing a graph

I'm using an intensity graph in order to show an image acquire by a camera. The size of the 2D array linked to the graph is related to the number of pixels of the image. But I do not want the scale to be in pixels but in µm, knowing that 1 pixel is 5.29*5.29 µm.
How can I change the scale of the intensity graph in order to show µm without changing the plot area?
Thank you.

zyl7,
the parameters you are looking for are properties from the graph itself. Therefore, you have to look around a bit in the property node from a graph... i am sure you will find out quite quick what i mean.
There are some examples provides with LV, but they are commonly focused on a special control; sadly i havent found one for intensity charts/graphs.... but this link can help you.
hope this helps,
Norbert B.
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

HTML5 fails to show labels on line graphs

Value labels on line graphs fail to show in HTML5 and work fine in the current html version as well as in Excel.
Repro
Create line graph
Right click on the marker of a series and select 'Add Label'
Save to OneDrive
Open it and view the regular html and then view the HMTL 5 version

Could you clarify if this in Power View sheet or in regular excel sheet/line chart?
Also could you clarify what you mean by regular html vs html5?
Thanks
Mey
http://blogs.msdn.com/solutions

Changing time scale for mixed signal graph

I want to change time scale for mixed signal graph 1 day or 5 day of realities?

And what exactly are you having problems with? If you want to use a property node, it's Xscale.Maximum.

Labview graph scale labels do not update

I am using XScale.NameLbl.Text and YScale.NameLbl.Text graph properties to programmatically change the labels on the X & Y axis. It seems to work when I run the subVI containing the graph, but when the subVI is placed in an application, they do not update based on the plot data that is selected to be plotted.
Attachments:
WC3000_Histogram_Plots.vi ‏96 KB

I think I understand your question. Your subvi has the waveform wired as an output. In the main vi that calls the subvi, you wire the output to a graph - correct? So you're looking for the graph properties in the subvi to be transfered to the main vi graph - correct?
If this is correct - it doesn't work that way. The waveform is just a cluster of t0, deltat, and the y array of data. None of the graphs properties are passed out of the subvi.
There are many ways to do what you're trying to do. You could wire the returned strings that you use for x and y labels as outputs of the subvi, then update the property node of the main vi graph. You could also pass a reference to the main vi graph to the subvi and make the x and y label changes to the main vi graph in
the subvi. I think the first option is probably easier.
Tim

Can not edit data labels in old graph chart objects using Word 2010

In Word 2010, Insert object "Microsoft Graph Chart", go to Chart Options and check an item in Data labels, such as "Series Name", "Category Name" or "Value". Click OK, then double-click on a data label to edit its
settings, or right-click on a data label and select "Format Data Labels..."
This makes Word to crash. The only way I can get out of it is by using the Task Manager to kill Word.
This happens in Windows 7 and Windows 8. This does NOT not happen in Word 2007 nor Word 2013, so it seems specific to Word 2010. All our clients have the same problem, this does not seem related to a specific workstation configuration.
The Microsoft Graph Chart are the old charts used within .doc files. I have an application still generating those types of files and need to edit data label settings manually before processing the files with my application.
Also note that anytime you edit a .doc file in Word 2010 and you see "Compatibility Mode" in the title bar, the Insert / Chart option from the ribbon inserts an old type chart (same as if you use Insert / Object / Microsoft Graph Chart), not the
new Word 2010 charts. You then have the same problem editing the data labels.
The underlying Activex seems to be the Chart.Exe file, the one I have installed is 14.0.7012.1000. You can see the version by double-clicking the chart and then look in the Help / About menu.
Any help will be greatly appreciated.

As this is a configuration issue and not a programming issue I' moving your question to a more appropriate forum where you're more likely to find assistance.
Cindy Meister, VSTO/Word MVP,
my blog

Adding data labels to column graph

I work in the financial industry and I have to add data labels to all bars that appear in my ten year performance graphs (see http://fundinvestor.calamos.com/ClosedEndFunds/CEFund.aspx?name=CHI under the "Performance" tab as an example). Is there a script that can do this? I saw there's this technique that Adobe offers for column totals: http://livedocs.adobe.com/en_US/Illustrator/13.0/help.html?content=WS714a382cdf7d304e7e07d 0100196cbc5f-619e.html but that's not working. What am I doing wrong? Adding data labels to bars is ridiculously simple in Excel, why can't I find the way to do it easily in Illustrator?

http://help.adobe.com/en_US/Illustrator/14.0/WS714a382cdf7d304e7e07d0100196cbc5f-619ea.htm l
That should do the trick.
Mylenium

Setting the title font and axis labels in a graph created with the Report Generation Toolkit

I'm using the LabVIEW Report Generation Toolkit for Microsoft Office to generate Excel worksheets containing plots. Unfortunately, the default font size used in the plots is huge (see attached worksheet). I was able to use Excel Set Graph Font.vi to reduce the size of the axis labels, but there does not appear to be a function to do this to the title and legend. In addition, there does not appear to be a function to set the axis text labels. Before I write my own, has NI released additional functions to perform these tasks?
Thanks for your help,
Zach Lerner
Software Engineer
OnWafer Technologies, Inc.
Attachments:
Test1_-_embedded_graph's_title_and_legend_font_is_huge.xls ‏14 KB

Hello Zeidan
The graph title and legend font sizes can be changed by accessing a low level VI (Excel_Insert_Chart.vi) that is part of the excelsub.llb that is located at (C:\Program Files\National Instruments\LabVIEW 8.2\vi.lib\addons\_office). This VI is called dynamically from within the Excel Insert Graph.vi and it uses VI server technology to access the Excel exposed properties. Attached to this post is an image of the block diagram of this VI after I have modified it to set the font sizes of the title and legend to 15. The circles in the image represent what I had to add to accomplish this.
Best Regards,
Ayman Kabire
Attachments:
Excel_Insert_Chart.JPG ‏99 KB

Can I align the orientation of axis labels in a graph generated with the report generation toolkit (Word)?

I was wondering how to align the axis labels, i.e. 90 degree or such when creating a graph with the report generation toolkit in word.
I can do it after the document is created through Format axis title -> alignment but is there a way out of LabVIEW?
I'd especially like to rotate the y-axis label by 90 degrees.
Thanks a lot,
Juergen

I think he means he can modify it by hand after the report has been generated... But what I want to do is generate the word graph out of labview already with the rotated axis label...
After I posted this I found out that we can do this with a macro and use it from labview, but unfortunately I don't know VB, or VBA...
Like this:

INVERTING SCALE LABEL IN XY GRAPH

Similar Messages

Maybe you are looking for