Invertory damaged and generated scrap against it.

Dear Experts,
Pls guide me on below.
My stock is damaged in store and converted in scrap and i will do the scrap sale for the same.
MM consultant will reduce the inventory let say 10 rs is cost and generate scrap inventory for the same let say 4 rs.becoz damage stock is my scrap and have scrap inventory cost.
Then i will do the sale for the same throgh PSG as object and transfer cost and revenue for the same to copa.
MM consultant want to track or link 10 rs and 4 rs in order to capture how many cost i reduced stock and generated scrap for the same.The objective of link are to track loss on the above example (6 rs loss).
How to do costing for the same.Becoz when inventory are reduced or scrap qty are generarted against the same. need some cost object for the same. let say cost center.they how to do the treatment for the same.
regards
RR

Dear Ajay,
Thanks for your reply....
I want to reduce the stock with full value rs 10 and create GR for another scrap material code with rs 4.so i will use two material code.
All this entry will post on cost center and statistical internal order. so that i will get -6 loss on internal order and 6 rs loss on cost center.
Then i will do sales order for scrap material code with psg as real object and same statistical interal order.
So i will book revenue 5rs and cost 4rs for the same.
will it be possible?
But how my internal order balance look like in above scenerio.
rs 10 consumption fg stock
rs 4 scrap stock cost
then
rs 5 revenue and rs 4 cost on internal order at the time of same in same statistical internal order.
and second point is m posting rs 10 and rs 4 on cost center. what will happen with this cost.from where i will charge.
regards
RR

Similar Messages

RG1 FOR DAMAGES AND SCRAP

HI
my client transfers the finished glass( updated in RG1 register) to the printing section where around 10% of the material is damaged and the damaged is sent back for processing as ROH.
How the RG1 for the updated is removed from the register)
Krishna

Hi
It is not possible to remove the RG1 register update, but we can avail the utilised ED by following way.
In J1iex capture&post the excise invoice without refering to purchase order for the quantity of material damaged/scrapped.
while doing in item 0001 tab give the material and change the material type from finished goods to rawmaterial.
Enter the duty values and other datas post it in the (RG23A)register it will showned as availed ED. The duty utlised during sales for the material is availed bcak in the register after you made it as scrap/waste.
This is according to my concept.
rgds
Srini

Scrap against production order

Hi,
My scenario is : I have a production order of 100 pieces out of which 80 are ok and 20 are scrap. I do a Goods Receipt of 100 and then scrap 20 pieces from stock.
What steps should I follow after I scarp 20 pieces from stock from Materials Management perspective like : Do I need to pay excise duty, entry in RG1 and Rg2 registers...
Regards
Ashish

Hi,
My scenario is : I have a production order of 100 pieces out of which 80 are ok and 20 are scrap. I do a Goods Receipt of 100 and then scrap 20 pieces from stock.
What steps should I follow after I scarp 20 pieces from stock from Materials Management perspective like: Do I need to pay excise duty, entry in RG1 and Rg2 registers?
You can do goods receipt against production order using MIGO /MB31 for 80
And then scrap the 20 in production area using MB1A and use Movt type 551 place it in to scrap location from there you can do scarp sale.
And for 20 Pieces you can reverse the in put excise duty go to J1IH select Mat write u2013off tab or select (F5) enter the input parameter as material document generated out of scrapping the material (551) and select the Register which is relevant for the material. Then enter the duty values like BED, Ecess & She cess manually.
Rgs

Acrobat 9 installed on Windows 8.1; upon Save, error every time: "The Organizer Database is damaged and will be reset..."; no "Organizer90" file found (to be deleted, as www suggests for solution with XP, VIsta, 7)

I've installed my old faithful Acrobat 9 Pro on my new Windows 8.1 computer. The program works, but every time I save the document, it tells me "The Organizer Database is damaged and will be reset. Quit the program and close all browsers." (Something close to that text.) I've entered the error online, and a solution does appear for XP, Vista, and Windows 7. It tells me to have Windows Explorer show hidden files, and then look for "Organizer90" within Users/[me]/AppData/LocalLow/Adobe/Acrobat/9.0, and then delete that file -- which will make Acrobat generate a new one. But there is no such file there. Please help with alternate solution. NOTE: When I "Check for Updates" in Acrobat, I'm told that there are no updates available at this time, but also told: "Please note that some updates for the following products cannot be determined at this time: Adobe Updater." Seems like things are out of whack.

Thanks for help. Difficulties continue: When trying to install 9.5.5, I'm told it can't install because the program may not be on my computer, or may be the wrong version. I'm told to check that the program exists. The installed version (9.0) is totally legit, my serial numbers, etc., I've used it for many years. Automatic update seems to be on, but I downloaded Adobe Updater to be sure. Seemed to make no difference. Program does function, but not perfectly. Under "About," it calls itself 9.0, so it would not seem that auto update is taking place. Acrobat on previous machine (Windows Vista) indeed calls itself 9.5.5. (It was installed with same 9.0 package, and presumably updated itself to 9.5.5 over the years.) So summary of current problem: Acrobat 9.0 won't upgrade to 9.5.5 on Windows 8.1.

SSRS PDF Export. There was an error opening this document. This file is damaged and could not be repaired

Hello,
I just experienced this problem, and was able to successfully mitigate. I wanted to share my experience and Solution.
The problem started with the following error after succesfully exporting a PDF Document. "There was an error opening this document. This file is damaged and could not be repaired."
This is only applicable if you can still export and open SSRS Reports to other formats. Go to the Log files of the SQL Instance. In my particular case I used the Default MSSQL instance: C:\ Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting
Services\LogFiles
The Folder will begin with MSRS (SRS is for SQL Reporting Services)
Sort the files by date modified and check for the most recent log file: ex. SQLDmpr0000.log The 0000 will be the incremental amount of errors you have experienced in SRS. Check for the following error:
"System.DllNotFoundException: Unable to load DLL 'T2Embed': Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))"
Below is a sample from the log.
reportrendering!ReportServer_0-1!1b78!02/07/2012-11:56:03:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException: , Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException:
An error occurred during rendering of the report. ---> Microsoft.ReportingServices.OnDemandReportRendering.ReportRenderingException: An error occurred during rendering of the report. ---> System.DllNotFoundException: Unable to load DLL 'T2Embed': Access
is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
   at Microsoft.ReportingServices.Rendering.ImageRenderer.FontPackage.TTGetEmbeddingType(Win32DCSafeHandle hdc, UInt32& status)
   at Microsoft.ReportingServices.Rendering.ImageRenderer.FontPackage.CheckEmbeddingRights(Win32DCSafeHandle hdc)
   at Microsoft.ReportingServices.Rendering.ImageRenderer.PDFWriter.ProcessFontForFontEmbedding(PDFFont pdfFont, Dictionary`2 embeddedFonts)
   at Microsoft.ReportingServices.Rendering.ImageRenderer.PDFWriter.EndReport()
   at Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer.Render(Report report, NameValueCollection deviceInfo, Hashtable renderProperties, CreateAndRegisterStream
createAndRegisterStream)
   at Microsoft.ReportingServices.Rendering.ImageRenderer.RendererBase.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo,
NameValueCollection clientCapabilities, Hashtable& renderProperties, CreateAndRegisterStream createAndRegisterStream)
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.Rendering.ImageRenderer.RendererBase.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo,
NameValueCollection clientCapabilities, Hashtable& renderProperties, CreateAndRegisterStream createAndRegisterStream)
   at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderFromOdpSnapshot(IRenderingExtension newRenderer, String streamName, ProcessingContext
pc, RenderingContext rc)
   --- End of inner exception stack trace ---;
If you notice the error states that T2Embed.dll access is denied. In my case this due to a hotfix installed by Microsoft:
MS11-087: Vulnerability in Windows kernel-mode drivers could allow remote code execution: December 13, 2011
Be advised, in order to fix your problem and render pdf's, a vulnerability shall be created.
To fix this issue and allow the export to PDF work correctly, you must give the system Read/Execute Permissions, and Built-in\Administrators Full Control.
Go to Windows\System32 and find the T2Embed.dll Go to Security and modify the permissions as listed above. Do the same to the T2Embed.dll in the SysWow64 folder.
Restart Reporting Services and you will be able to export to PDF.
Best Wishes!
Mariano
www.lucontech.com

I'm not convinced this is the exact cause of the issue. I will check my log files to see if I find anything like what you described. However, I get this error when a particular user tries to do a "print preview" from a custom button. The
code builds a ReportViewer object, sets the ReportPath, etc.
The reason I'm not convinced is because we have a separate reports page that has the report viewer embedded into it. If the user generates the report that way and exports to PDF, Word, etc...the user can generate the file and be on their way. As
soon as the user clicks our "Print" button on the page without the ReportViewer embedded, the above mentioned error occurs.
UPDATE: Perhaps we have a different problem since my issue is from a custom button. I found the solution
here and confirmed the solution with the customer. It had to do with the code using Response.Flush() instead of Response.End().
One thing I noticed before I implemented the change: When you would close the PDF, it would ask you to save changes to the PDF. After implementing Response.End() instead, that prompt went away. No doubt it has to do with the differences between
how Response.Flush() and Response.End() handle the stream returned.
Anyway, posting in case someone has the same issue.

Error generating release against scheduling agreement

Need help in resolving the below error msg for Scheduling Agreement.
ERROR message:
"Error generating release against scheduling agreement (cause 2)"
"2: The forecast delivery schedule or the JIT delivery schedule was generated but no message record could be generated."

Yes.. its solved now...
problem areas:
1: delivery date not matching GR date.
solution: chng delvry date to GR date in ME38 and thn do GR.
2: Release not hapnd properly incase if u hav used doc typ LPA for JIT/Forcasting.
solution: in ME84, chk if the indicator for 'create release' is 'green' for ur SA#. In ME38, select the line and click on 'Release" icon. Select ur relevant delivery schudle line and click on JIT release or Forcast Release icon. See if the indicator is 'Green". If not, the issue is wit message output for the perticular delivry date. (use msg typ LPET process for output) MAKE SURE U SAVE THIS CHNG. Chk againg for the Release indicator for delivry line. If green thn.. its done..
Let me know if it was hlpful... or need clarity

Error generating release against scheduling agreement (cause 6) in ME38

Hello Experts,
Need your inputs on the the below error getting generated in ME38
Error generating release against scheduling agreement (cause 6)
Message no. 06857
Diagnosis
The function module for generating a scheduling agreement release (forecast delivery schedule or JIT delivery schedule) has run up against an error, causing processing to be terminated.
In this case the cause of the error is 6.
System Response
The error may involve one of the following situations:
1: The nature of the error cannot be specified precisely.
2: The forecast delivery schedule or the JIT delivery schedule was generated but no message record could be generated.
3: A document type for which the functions "Generate forecast delivery schedule" or "Generate JIT delivery schedule" are not defined may be involved.
4: A material for which the function "Generate JIT delivery schedule" is not defined may be involved.
5: A scheduling agreement that has not yet been released by all persons responsible may be involved.
6: The factory calendar has not been maintained correctly.
Procedure
Error source 1:
Check whether the vendor and plant shown in the PO actually exist in the system.
Error source 2:
Check the Customizing facility for message determination with respect to delivery schedules created under scheduling agreements (print operation '9').
Error source 3:
In Customizing, maintain the document types accordingly ( Define document types for scheduling agreement). Then create a new scheduling agreement with a document type for which release documentation is defined.
Error source 4:
Maintain the JIT delivery schedule indicator in the material master record.
Error source 5:
Have the scheduling agreement released by the person(s) responsible.
Error source 6:
If you are using a release creation profile without aggregation, you must maintain the factory calendar for the next 999 days
Regards,
Santosh

Hello Mallinath,
I referred the note and following are the observarion in the system.
Step1:Run T-code SE16 (table T001W) to check the calendar ID of the plant.
-----Referred the Calendor ID
Step2: Check the JIT/Forecast delivery schedule of release creation profile in customizing. (T-code OLME -> Scheduling Agreement -> Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu.)
Run T-code SCAL to adjust the period of the calendar ID which checked in STEP 1 according to the JIT/Forecast delivery schedule of the release creation profile which checked in STEP 2.
(For example, if the JIT/Forecast delivery schedule of the release creation profile is "999" days, then the calendar should be extended for the next 999 days at least)
---------In this case factory calendor is valid till 2015 and according to note needs to change the factory calendor till 2018( or for 999 days) ?
Waiting for your inputs.
Thanking you,
Santosh

Error with Adobe Acrobat X "error opening the document. The file is damaged and could not recover"

Good morning,
I have a problem when generating PDF files with Adobe Acrobat X.
When I give print a Word document 2003 ... 2007 ... 2010 ... and select a network drive to save the PDF file, I get the following error "error opening the document. Thefile is damaged and not could recover."
The file is saved on your drive well ... but I always get this error.
Any ideas???
Thank you.

First of all thanks for responding.
The installed version of Adobe's Adobe OS X and Windows XP machines is thelatest patch level.
The local system .... works well ... Open Office 2010 ... create a new Word document and save it locally ... and all good.
The problem is though that same machine ... it enters network (not Windows network. OES2 is a network with Novell network client) ... and to open and create a new document to WORD .... when printing the PDF printer ... select a network drive... and when the document is saved well ... but it shows the error.
I have an amount of hours lost with this ... I hope you can help me find a solution.
Thank you very much.

Error generating release against Scheduling agreement (Cause 2)

dear Sap Experts,
Please advise me that Error generating release against Scheduling agreement (Cause 2)
As i have already used transaction code OMQP and click print operation 9 for LPH1 & LPJI A,
How can i sort this problem.
Thanks
mohit

Hi,
pls find below thread
SA delivery schedule release problem
you have to Maintain condition records for LPJ1 and LPF1 in NACE
maintain condition record in transaction MN10 for schedule release. And Generally in the condition records will be maintained for LPH1 & LPJ1in MN10.
Once you maintain that, you can go to ME84 and ME38 release the schedule
the JIT indicator in MMR for your material.
Check that and also you can maintain a release creation profile in VMR or ME31L.
Regards
Raj.

Calculate date differences in consecutive rows and generate a sequence

Hi Guys,
I am trying to implement one scenario where in i need to compare the date differences for consecutive rows and generate a sequence against that.
this is the table schema:
create table temp
id int identity(1,1),
emp_id int,
time datetime
insert into temp
values
(1, '2011-02-20 12:30:00.000'),
(1, '2011-02-20 12:32:34.172'),
(1, '2011-02-20 12:32:34.172'),
(1, '2011-02-20 12:43:21.004'),
(1, '2011-02-20 12:46:39.745'),
(2, '2011-02-20 12:48:06.004'),
(2, '2011-02-20 12:48:06.004'),
(2, '2011-02-20 12:53:07.733'),
(2, '2011-02-20 12:55:30.295');
now, I want to compare the first date-time with the second and so on. now if the date-time difference is same for two consecutive rows then the sequence should increment by 1 otherwise the sequence again will start from '00' for any unique date-time.
This sequence number should start from '00' from each employee.
I want the output to be like this
ID emp_id
time
sequence
1 1 2011-02-20 12:30:00.000
00
2 1 2011-02-20 12:32:34.172
00
3 1 2011-02-20 12:32:34.172
01
4 1 2011-02-20 12:32:34.172
02
5 1 2011-02-20 12:46:39.745
00
6 2
2011-02-20 12:48:06.004 00
7 2
2011-02-20 12:48:07.003 00
8 2
2011-02-20 12:48:07.003 01
9 2
2011-02-20 12:46:39.745 00
Please revert as soon as possible as this is a bit urgent.
Thank You in Advance. :)

create table temp
(id int identity(1,1),
emp_id int,
time datetime
insert into temp values
(1, '20110220 12:30:00.000'),
(1, '20110220 12:32:34.172'),
(1, '20110220 12:32:34.172'),
(1, '20110220 12:43:21.004'),
(1, '20110220 12:46:39.745'),
(2, '20110220 12:48:06.004'),
(2, '20110220 12:48:06.004'),
(2, '20110220 12:53:07.733'),
(2, '20110220 12:55:30.295');
go
SELECT id, emp_id, time,
   dateadd(mcs, (row_number() OVER(PARTITION BY emp_id, time ORDER BY
id) - 1) * 10,
   convert(datetime2(5), time)) AS [Sequence]
FROM   temp
ORDER BY id
go
DROP TABLE temp
Erland Sommarskog, SQL Server MVP, [email protected]

I updated my computer today to 10.1.1 Yosemite. In doing so, it said my kapersky's virus scanner is damaged and needs to be deleted. I did so. I'm wondering if you can recommend another virus scanner?

I updated my computer today to Yosemite 10.1. It told me that my Kaspersky virus scanner was damaged and that I should delete it. I did so. I'm wondering what virus scanner I should purchase?

First, you should be sure you have fully uninstalled the software. If you have no uninstaller nor directions for uninstalling, then see:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
    1. AppZapper
    2. AppDelete
    3. Automaton
    4. Hazel
    5. AppCleaner
    6. CleanApp
    7. iTrash
    8. Amnesia
    9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.
Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide, AdwareMedic, or Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect everything targeting the Mac.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

Sap Error generating release against scheduling agreement (cause 2)

Hi,
Please help me on this issue
Error generating release against scheduling agreement (cause 2)
Message no. 06857
Regards
Amey

Hi,
For EDI you might be missing settings in:
1) Matrl Mng -> Purchasing -> Messages -> Output control -> Output types -> Define Message Types for Scheduling Agreement Release/Expediter -> Fine-Tuned Control: Forecast Delivery Schedule/Expediter (check one of the outputs for 9 and for A )
2) WE20 - EDI settings for partner that is a vendor who should receive your release information DELFOR / DELJIT (if you do not manage other EDI settings then also other WEDI setings should be maintained)
Best Regards,
Tomek

Differnce between DB Backup and generate Script

whats the differnce between DB Backup and generating Script of a database.
Please mention the main diffrence as we know while genearating script we can select tables/procedures of our choice instead of having all while in backup it takes full tables and procedures.

Hi Abhishek,
In addition to others’ posts, we need to know that there are different types of
backup in SQL Server, such as full backup, differential backup, log back up, file backup and so on. It is recommended to back up database on a regular basis, as a well-planned backup
and restore strategy helps protect databases against data loss caused by a variety of failures. You can make
maintenance plans to back up database automatically.
However, generating scripts is not a disaster recovery option. If you encounter some failures about database, you cannot get data back by generating scripts.
Thanks,
Lydia Zhang

When I attempt to open a PDF file I saved from a website, I get the message "There was an error opening this document. The file is damaged and could not be repaired." Is there any way to correct this problem?

When I attempt to open a PDF file I saved from a website using Safari, I get the message "There was an error opening this document. The file is damaged and could not be repaired." When I save the same PDF file using FireFox it opens up immediately. Is there any way to correct this problem with Safari?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

How do I backup to my external hd on 10.6.8 if the disk is damaged and can't be repaired?

Hi! So, I'll get straight to the point. I'm running 10.6.8 on my mac, which is about 5 years old. I attempted to install OSX Mavericks last night, so I could update some of my software. Anyways, the computer restarts and opens up the installer for OSX Mavericks, but after about a minute of installing, it shows that the Mavericks install failed. The upgrade couldn't be started because the disk Macintosh HD is damaged and can't be repaired.
Could someone tell me (step by step) how to back up all of my data, erase the disk, and install again? I have an external HD by the way.
Help would be much appreciated!

So, essentially you're saying that I need to download one of these programs to my external hd. But, how do I boot it from my mac if I can't get past the installation screen of Mavericks? I'm running on my other mac right now, if that helps. I've tried to use disk utility to repair, but it's greyed out. I honestly just want to retrieve all of my data, wipe the drive, and then install a new one. I just want to know how to do that.

Invertory damaged and generated scrap against it.

Similar Messages

Maybe you are looking for