Investigation Discovery channel in HD #623???? anyone have it???

Recieved Verizon's spotlight magazine today ans was surprised to see on page 16 that it listed investigaion Discovery channel as being on channel 623 in hd well when i went to look channel 623 does not exist in my guide, Can someone please explain this / i am in Claymont DE VHO 8 - why would you note a channel when it doesn't exist at least for me

Hubrisnxs wrote:
looks like they have it just in SD For your area VHO8 deleware.
http://www22.verizon.com/Residential/FiOSTV/ChannelLineup/ChannelLineup.htm
click on (Print channel lineup as PDF) to see it in a more user friendly format, and then you can do a ctrl + f to search for that station.
yes you are right it is only in SD here - why do you have it in HD and where are you located? (PS- I have the channel lineup and it is not listed) but thanks for info anyway

Similar Messages

I am unable to send to an address that I have been using for a long time. All aspects have been investigated but with no solution ,has anyone encountered this problem before?

I am unable to send to an address that I have been using for a long time. All aspects have been investigated but with no solution ,has anyone encountered this problem before?

Hi Eric,
The message seems to totally disappear. It is going to an AOL customer in UK. I changed their address to start with a lowercase letter & the message was returned to me by AOL as undeliverable, I then changed the first letter of the address beck to upper case, the same I have been using for years, but again it disappeared.
I appreciate any help you can give me. Tks Gord.

SCOM 2012 SNMP Trap - Does anyone have it working?

I am wondering if anyone out there has had any luck with getting SNMP Traps to be captured by SCOM 2012? Probes work fine.
We have been unable to get SCOM 2012 to receive a SNMP Trap from network devices. We currently have a case open with Microsoft, but they dont have any answers as of yet.
Here are the cliff notes version of what we have done so far.
Discovery - OK
The nodes discover without issue. I made sure they were set to SNMP only. I did this to verify we were talking SNMP and not just ICMP.
Open Ports/Firewall Issues
No firewalls are in place on the SCOM server and none exist between devices we are trying to get traps from. Using a port tool, I can see that UDP 162 is listening as expected and its the System Center Management Host Process that is running the
process. We have tried having SNMP installed, but disabled, installed and running, and uninstalled. Currently we have the SNMP service installed and running. The SNMP Trap Service is NOT installed.
Data Validation
Using Wireshark running on the SCOM box I have been able to validate the OIDs we are searching for are hitting the SCOM server. I installed an SNMP Trap generator and Receiver on my local machine as well as Jalasoft SNMP Simulator. I was able
to discover my local machine as a network device and if I send a TRAP from the TRAP generator on my local machine to the receiver on my local machine I can validate the data is coming through ok.
What has been done on SCOM side
The simplest place to look for data is with an Event Collection Rule and then an Event View Monitor. We have set up an Event Based Monitor to search for an OID that I know to be accurate and then I set up an Event monitor to look for
anything hitting that Collection Rule. The Event monitor showed nothing so we changed the EVent Monitor to look for anything that hit Node which should show any SNMP traps that have hit from network devices. No results.
We tried to run WFAnalyzer from the 2007R2 Authoring Console, but it wont run against 2012 and from what I have found the 2012 edition doesnt exist anywhere yet.
So has anyone succesfully received a SNMP TRAP into SCOM 2012?

Hi,
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as "Answered" as the previous steps should be helpful for many similar scenarios.
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
Thanks,
Yog Li
TechNet Community Support
How could you possibly mark this as answered? No answer was given, it was quiet for a couple of days including one of which was a holiday in the US. The previous steps are NOT helpful. The question remains, Does anyone have it working?
People have given troubleshooting advice, but nobody has actually answered the simple question. Do they have it actually WORKING?

How do I find the Discovery Channel in the on demand menu?

Look under networks.

linuxgeek wrote:
@enonorez, I did not see the Discovery Channel on U-verse's on demand menu, too. Since Discovery Channel is not offered by AT&T U-verse via on demand, you would have to go to the AT&T U-verse channel request website and make a request for Discovery Channel On Demand.
They already know users want Discovery networks on On Demand, I'd bet it shows up on next contract renewal like CBS On Demand showed up for everyone on recent CBS renewal.
Chris
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(billing and all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more

After updating to IOS7 I have lost a years worth of pictures and my wi-fi keeps dropping out. Anyone have any suggestions?

After updating to IOS7 I have lost a years worth of pictures and my wi-fi keeps dropping out. Anyone have any similar problems or suggestions?

Re wifi:
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Re Photos:
Get them from your backup. You do backup frequently don't you?
iPad Photo Recovery: How to Recover Deleted Photos
http://www.iskysoft.com/iphone-data-recovery-mac/ipad-photo-recovery.html
How to Restore Lost or Deleted Files from iPad
http://www.iphone-ipad-recovery.com/recover-ipad-mini-files.html
How to Recover Deleted Files from iPad
http://www.kvisoft.com/tutorials/recover-deleted-files-from-ipad.html
iSkysoft Free iPhone Data Recovery
http://www.iskysoft.com/iphone-data-recovery/
Recover iPhone/iPad/iPod touch lost data, Free.
Free recover iPhone/iPad/iPod touch lost contacts, photos, videos, notes, call logs and more
Recover data directly from iPhone or from iTunes backup
Preview and recover lost iOS data with original quality
Wondershare Dr.Fone for iOS
http://www.wondershare.net/data-recovery/iphone-data-recovery.html?gclid=CJT7i9e 6gb4CFcvm7AodbUEAJQ
Recover contacts, messages, photos, videos, notes, call history, calendars, voicemail, voice memos, reminders, bookmarks and other documents.
iPad Data Recovery Software (PC & Mac)
http://www.anysoftwaretools.com/ipad-data-recovery.html
 Cheers, Tom

Sr. Research Investigator- Discovery Automation #19532

Position Description: Design, construction, and operational oversight of automated systems and instrumentation used in whole animal. Implement and or develop novel ways to instrument animals for acute and chronic recording purposes. Such systems may require either the development of original instrumentation and or the integration of third party instruments. Identify, evaluate and apply new imaging and machine vision technologies for in vivo studies. Keep current with advances in biomedical technology as they apply to oncology, immunology, diabetes, obesity and cardiovascular disease.
Position Requirements: M.S. or Ph.D. in a scientific or engineering discipline, preferably in Biomedical Engineering, Biophysics or EE ChemE with a strong biological or biomedical focus. 3+ years experience working in a pharmaceutical or biotechnology context. B.S. level candidates with extensive experience 7+ years will also be considered. The successful candidate should have a proven track record of technology development for in vivo experimentation, including some of the following small animal surgery optics, machine vision and image processing electronics for biosignal acquisition and processing implantable biosensors and telemetry. Programming of laboratory automation applications in Visual Basic, Labview or other environments. Strong communication and collaboration skills. An ability to interact, with credibility and confidence, with project scientists at all levels.
We invite all qualified individiuals to apply online via our Career Website, which www.bms.com and then click on the "Careers" tab. Please apply to position #19532.
Bristol-Myers Squibb co. is an equal opportunity employer.

Hi,
This post is actually referenced in the LabVIEW Job Opening Forum at Sr. Research Investigator- Discovery Automation #19532 .
Regards,
Michael
Application Engineer
National Instruments
Regards,
Michael
Applications Engineering
National Instruments

Anyone have these settings in their Quicktime?

Anyone have these settings in their Quicktime? I got this tip from Worldstart.com this AM. I have this problem with I-Tunes when a song starts to play sometimes it stutters,skips. I tried to get QuickTime settings she tals about but I don't have them in Win QT 7.5
Tip #3174 - iTunes Skips
Every once in awhile, my iTunes music skips. It's fine when I'm listening to the music on my iPod, but if I'm just using my computer, it all skips. What's going on?
A:
Okay, so we have established that iTunes is a great musical discovery, but it leaves much to be desired when it starts to skip. Nobody likes to listen to their music with a bunch of stutters in between, am I right?! So, let's look at some reasons why iTunes might be doing this to you.
You can use the task manager to shut down other programs to see if that stops the skipping, but that's not really too convenient for anyone.
A lot of times, the skipping problem lies within the QuickTime program that you need to have in order for iTunes to work. There are a couple settings you can change in QuickTime to combat the stuttering issue. To do this, make sure your iTunes is shut down and go to Start, Control Panel. Once in there, double click on the QuickTime icon. You must be in the classic Control Panel view for this to work.
(Tab is called QuickTime settings,I don't have in mine, only Preferences)
Once in there, use the drop down menu at the very top of the dialogue box and choose Sound Out. This will allow you to work within the sound output elements of your QuickTime.
(These also are tabs within QuickTime I don't have, and I have the very latest 7.5 QuickTime installed)
Now, under the choice that says "Choose a device for playback," use the drop down menu and select "waveOut." You can then just close the QuickTime window. You don't need to press OK or anything, just completely close it out.
Next, restart your iTunes and your skipping problem should be resolved. You can start listening to your music again, while doing your other work as well, without any further problems. Like I said before, you should try this little suggestion before you go out and get more RAM, but if the problem persists, that may be just what you'll have to do. Either way, it's worth it for your music, right?!
~ Erin

That site is either a bit inaccurate or describes an earlier version of QuickTime. Go to the QuickTime control panel, double-click on it to open it (it will indeed open QuickTime Preferences), click on the Audio tab, and check the box that says "Safe Mode (waveOut only)". That has in some cases cured the "stuttering".
Good luck.

Anyone have an example of a PCI-6250 Digital and Analog Aquistion with Analog Post-Trigger?

Hey All,
We're trying to set up a post trigger data capture of parallel absolute strobed Gurley 17-bit encoder data (ignoring MSB for 16-bit aquisition) with an analog signal that is the output of a torque load cell. The trick is to use the analog signal level as a post-trigger to stop the data aquisition.
1) can the analog signal be recorded and used as the trigger?
2) does anyone have an example using the PCI-6250 (or 6251)
Thanks in advance for your help,
-Drewksi

Hi Drewski,
You can use the APFI0 line as an analog trigger for your signal. However, in this case you need to connect your analog signal to both the analog channel you want to acquire at and the APFI0 line.
Assuming you are using LabVIEW,you can check the "Acq&Graph Voltage-Ext Clk-Analog reference.vi" example. This examples uses an external clock but it works also with the internal clock. All you have to do to change the control to onboard clock.
You can find this example in LabVIEW Help >> Find Examples >> Hardware Input and Output >> DAQmx >> Analog Measurement >> Voltage
Best Regards,
Faris
Bueller

Discovery channel very stale now

Its been bugging me for over a year now but the discovery channel is becoming extremley boring and stale.
Questions for BT
1. when are we finally going to get some of discoverys bigger shows?
2. and why or why do you still advertise a new series of something and get our hopes up, until we find out that you have only placed one episode of a show avaliable in the series. Not really a series is it, and no other shows every get added from the series.
3. Have bt had a change of heart regarding the discovery,history and NG channels as they are gradualy getting worse.
example ice road truckers, even channel 5 can afford to show this show but series one ended on vision over a year ago and still waiting for series 2...

At least I have untill 9pm on 5/04/11 to decide what to do with our TV package... BT Vision, Sky or Virgin...
I think I might get everyone to write what channels they have been watching over the next week and decide from there- what to do with the TV side of things...
To be honest- I think the only stuff the rest of the family watch is all BBC, ITV, Sky Sports 1, Sky Sports 2, ESPN, C4, C5, Quest, Music On Demand, Poor TV Choice selection and Catch Up TV services anyway...
Yes- we pay £23.00 for all Sky Sports channels but only watch Sky Sports 1 & 2...
And of course the Virgin+ PVR is full of recordings from the BBC, ITV and C4...

Discovery channel - Planet Earth

I'm new to HD TV, and I've been hearing about Discovery channel's Planet Earth. Did I miss it, or are they going to show it again? Thanks for your help, -Michael

Yeah I got this on HD-DVD and I would say it is one on the best HD programs out there of its kind. It is really on do not miss. They do have re runs on it that play every now and again. But I would say jump on eBay and get it on HD-DVD or Blu-Ray of you have the players.

Anyone have experience with SmartCurve, especially in PSE3?

In a discussion captioned PSE 4.0 vs 5.0 (current last message 43, Oct 3, 2006)there is the exchange below. I decided to start a new thread because the old one had gone elsewhere.
Two questions: Does anyone have experience with SmartCurve? And does it care about version? I have PSE3. However, the software does not specify but was updated 9/11/06 and thus is for PSE4 at least.
Duncan
===================
Robert Eckerlin - 3:55am Sep 28, 06 PST (#29 of 43)
Dean, could you please point me to those "Curves" Plug-ins that work with PSE 4 (and that will hopefully also work with PSE V5)?
Thanks a lot in advance
Robert
Juergen D - 2:47pm Sep 28, 06 PST (#30 of 43)
Robert,
Is this what you are looking for:
http://free.pages.at/easyfilter/curves.html ?
Juergen

Jack,
You assumed correctly. Grant's Curve tool can only access the composite RGB channel. His tool does have the advantage of using an adjustment layer mask...so you can mask out parts you don't want adjusted by the curve. The advantage of using a mask vs a duplicate layer and eraser is that with a mask you never destroy pixils...just hide them...so if you make a mistake it can save a lot of time and frustration. On the negative side, you won't be able to reopen the curves adjustment layer once okayed...but you can still edit the mask.
BTW, Grant's tool sets includes several tools so it's a worthwhile download. However, if you have Hidden Elements installed, I don't know if you'd get anything extra/different. BTW, there's a freeware Hidden Elements set on the Adobe Exchange which might also be worth looking at. I'm not sure what all is packed in that set...and I'm not sure where they've got it stashed...perhaps Actions or maybe Plugins.
Terri

Monitoring Software - Does anyone have recommendations?

Hi,
I'm looking for monitoring software for WebLogic 6.0. Does anyone have
recommendations for certain products?
Daniel

For performance monitoring, I have had good experience with the Precise
Indepth for J2EE product. There is a competing product from Wily &
Associates, but I haven't used it. BMC also provides a monitoring plugin
for Weblogic, but I don't think it is performance related -- it is more an
event-raising product more in line with older big iron monitoring products
that I've used.
You might also want to check out Peakstone, Securant and Manage.com. They
all had somewhat related products at the BEA eWorld show.
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com
+1.617.623.5782
WebLogic Consulting Available
"Daniel Hoppe" <[email protected]> wrote in message
news:[email protected]..
Hi,
I'm looking for monitoring software for WebLogic 6.0. Does anyone have
recommendations for certain products?
Daniel

Does anyone have a simple code.....

Does anyone have a simple code to make a xml video like you tube?

Hi zenith
By default the source of counter 0 while using the 9401 is located on PFI0 or pin 14. In order to determine the rest of the pins have a look at the image below. I was able to get this information from by right clicking my device in Measurement and Automation Explorer (MAX) and selecting device pinouts.
You can also specify which PFI line the counter outputs on. In order to use this you use a DAQmx Channel Property node and modify the Counter Output Pulse Terminal. Have a look at the screen shot below
Hope this helps.
Chris_K_
Message Edited by Chris_K_ on 08-27-2008 12:26 PM
National Instruments
Applications Engineer
Attachments:
2008-08-27_111350.jpg ‏20 KB
2008-08-27_110349.jpg ‏72 KB

My ipad 2 will not connect to the internet I've tried to manually enter it but its not recognising it or finding any connections. I've reset it to factory settings twice and its not clearing it. Does anyone have any ideas??

My ipad 2 will not connect to the internet I've tried to manually enter it but its not recognising it or finding any connections. I've reset it to factory settings twice and its not clearing it. Does anyone have any ideas??

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Some of my apps refuse to open. For example, google crome gives me the message that it quit unexpectedly and gives me the option to submit a report to no resolve. Does anyone have suggestions?

Some of my apps refuse to open. For example, google crome gives me the message that it quit unexpectedly and gives me the option to submit a report to no resolve. Does anyone have suggestions?

Welcome to the Apple community.
Does anyone have suggestions?
Trash the spyware (Chrome) and use Safari.

Investigation Discovery channel in HD #623???? anyone have it???

Similar Messages

Maybe you are looking for