Investment grant on asset

Hi all,
I would like to know how it could be possible to integrate investment grant on a legacy asset.
I have two kind of assets :
asset capitalized on a previous fiscal year
asset capitalized on the current fiscal year
Integrating investment grant for asset capitalized on a previous fiscal year is not really difficult, I mean, I have to fill the investment grant directly on the takeovers values.
But, I really don't know how I could integrate the investment grant on a asset capitalized on the current fiscal year. I think I have to create a transaction on the AS92, using a transaction type designed for the investment grant with a asset value date ranged 01.01.2009 to the takeover date.
Nevertheless, I have an error message when I fill the transaction type defined for the investment grant:
"Transaction Type I99 cannot be used here"
T-code AO83 : I99 - Mouvement type for investment support measure 99
transaction type groue : 50 - Allocation of investment support
credit transaction
capitalize fixed asset
Consolidation transaction type : F20 (redirecting to the F00)
Asst hist sheet grp : 50 - Allocation of investment support
thank you in advance for your reply
NB

On SAP OSS, I found out this one :
https://service.sap.com/sap/support/notes/151687
Symptom
You cannot transfer investment support posted manually between the fiscal year start date and date of legacy data transfer for a legacy assets data transfer during the fiscal year.
If you try to transfer a transaction with transaction type Ixx where xx is an investment support key using Transaction AS91, the error message AA207: "Transaction type Ixx cannot be used here".
Additional key words
Cause and prerequisites
For technical reasons you cannot use transaction types during legacy assets data transfer which were restricted to certain depreciation areas.
Solution
The easiest solution is to do without transferring investment support posted in the current year. Neither transfer the investment support to the General Ledger nor to Asset Accounting and post the investment support collectively after completion of legacy assets data transfer with the function "Periodic processing" "Investment grant".
If you must transfer posted investment support nonetheless, you must do this with another transaction type. To do this proceed as follows:
1. Copy transaction type 154 and enter asset history sheet group 50 there.
2. Only enter the asset value date and the new transaction type on the transaction screen when you transfer the transactions with Transaction AS91.
3. Specify the investment support on the screen "Proportional values" on the right column (values of the current year) in precisely those areas in which a reduction of APC should be carried out according to investment support.
Since the investment support is not derived from the amount posted with the new transaction type but transferred as an accumulated depreciation, differences may occur in special situations.
If you want to transfer much investment support this way, first check whether subsequent processing (display in reporting, subsequent retirements and transfers) corresponds to your requirements.
I tried by copying the transaction type 154.
But it doesn't works !!
I have the same error message : Transaction type XXX cannot be used here
Please help me !!
Edited by: NBEAUDET on Jul 2, 2009 4:56 PM

Similar Messages

Investment Grant set up.

Hi,
I have a requirement whereby the investment grant needs to be set up.I have done a similar one and in that I had actually set up Investment grant for an asset class with a fixed amount ,activated Grant for the asset class using AR11N Tcode and it worked fine.
Now the requirement is I have to set up for an asset class whereby the Grant amount has to be keyed in by the user.
It is differnt for differnt assets belonging to the same asset class.
How can I do this??Kindly advise.
Thanks much.

Which investment grant to be used for a specific asset depends on the assignment of the Investment Support Measure in the master data of the asset. So, you need to assegn the correct investment support measure in the asset master data.

Investment grants exceed APC in reference area 01 Msg no. AA661 in ABIF

Dear gurus,
When I execute the T-code ABIF in order to create an asset transaction with investment suport, I've got the following message:
Investment grants exceed APC in reference area 01
    Message no. AA661
Asset affected: 100000000004-0005
Diagnosis
    The posting document cannot be processed since the total of investment
    grants in the individual areas exceeds the acquisition value in
    reference depreciation area 01.
Procedure
    Correct the posting document.
I haven't got ane idea about the problem. Where is it? how can I solve it? Did I have to do this transaction with an asset that haven't got any entry / transaction?
Thanks for your reply and help,
With regards,
Gül'

Hello,
to solve it, I did 2 things:
in the custumizing "define how depreciation areas post to general ledger" (in organizational structures => depreciation area).
then click the depreciation area that concerned, and for subvention investment grand select " all values allowed".
but, the problem occures again, so I check the value in asset explorer and I saw that the amount that I entered for this asset was to high, aslo I've created a new asset in AS01. Then, after entering the key of investment support measure, I checked an amount in abif that was correct. I'm doing exercices, so it's not a problem for me to create a new asset.
I don't know if you're doing exercices like me (I 'm doing an internship in order to learn how to use SAP) so I can create other asset but for a compagny it would be more difficult.
Tell me if you can solve the problem,
Gü

Investment order to asset class

hai,
Is it possible to assign investment order to asset class (apart from AUC) instead of Asset Master.
govind.

Hi,
it may not be possible, because the Asset class is defined in Customizing. At the time of customizing it is not known which investment order it will be used.
Further more, Investment Order is basically created to monitor the capitalisation of Individual assets and not the Consolidated assets within the Asset class. This could be the reason that SAP has not provided the field in Asset class.
Thanks
Siva

Assigned investment order in Asset Master

Hi Guys
We have to do budgeting to restrict the asset purchase over a particular value
We are doing investment management for the same
"THE ISSUE IS WHEN IAM DOING THE ME21N PURCHASE ORDER, THE SYSTEM IS NOT BLOCKING EVENTHOUGH THE VALUE EXCEEDS THE INVESTMENT ORDER VALUE"
Following has been done by me
1) IM01, created a investoment program defintion
2) IM22, done investment progrma structure
3) IM32, done the budget for the investment program
4) KO01, created a internal order (assigned the investment program)
5) AS01, Created assets (assigned the investement order in the investment order
In configuration part, i have assigned the investment order for assets as ACSET
When iam doing purchase order using ME21N, the value of the asset is higher than the value maintianed in budget. The system is not giving any error
Guys any idea on this...
Thanks
Warm Regards
Bala

Hi Guys
I have availablity control with 100 % and message i gave is 3 (Error)
Should i perform IM52, and if so when iam doing IM52, iam getting a message as "NO MEASURES FOUND"
To perform IM52, should any configuration exists
Thanks
Bala

What is Investment allowance on asset. and How can we map into SAP?

Hi all,
I want know what is investment allowance on asset and how can we map into sap?
Thank you in advance.
Regards,
Chandu.

hello chandu ,
In order to encourage substantial investment in plant or machinery clause 5 of the Finance Bill, 2013 seeks to insert new section 32AC in the Income-tax Act, 1961 to provide for deduction for
investment in new plant or machinery by a company. It is allowed over and above the depreciation rates. This is for tax calculation purpose for availing this benefit so many conditions to be fullfilled. In sap this can be handled through development only. n.selvakumar.

GMDERIVE, grant funded asset retirements

I am searching for solutions on how to derive the sponsor program when using ABAON to retire grant funded assets. Our current GMDERIVE set up includes using the internal order from the asset master to derive the sponsor program, but when posting the retirement, our gain/loss account is not using the asset number to post so there is no asset to derive the internal order to derive the sponsor program. This results in system GMDERIVE error for sponsor program, "check rules". Any suggestions would be appreciated.
I have attempted to create a custom asset transaction type for the grant funded retirement, but the ABAON posting does not assign a transaction type to the lines with the gain/loss account, only asset GL and fund balance GL lines. I see these results when using the active trace on GMDERIVE. The sponsor class is derived from the gain/loss GL account which falls into our revenue category. the custom t-type includes the option of posting gain/loss to asset, but it still does not assign the asset number as part of the posting.

Hi.
You can try do it in the next way(I've never do it before for asset, but for material I did)
Add field ANLU1 to COBL
Then extend GMDERIVE structure, eg ZZANLU1
Assign COBL-ANLU1 to GMDERIVE-ZZANLU1 in EXIT_SAPLGMDT_002
Then use this field in GM's derivation to find out which asset writing-off

Capitalization of AUC investment measure to asset

Hi,
I created a project and then settled corresponding WBS elements to AUC investment measure using CJ88.After that i am not able to capitalize to final asset.Please help me in procedure as I am not able to settle using normal line item settlement AUC as this is investment measure.

Hi Prad,
I am on 4.6C/D.
Please check on your settings for Capitalization of AUCs created through Investment Support Measures: -
1. Go to the IMG, Asset Accounting under Special Valuation and determine the Depreciation Areas you would like your Investment Support Measures to post to.
2. Still in Special Valuation, define an Investment Support Key and assign it to the relevant depreciation area
3. Also, define the relevant account determination for such posting under the Special Valuation
4. Proceed in the same area to define the Transaction type for the Investment Support Measure by changing any of the Standard ones in there in line with your requirements
5. Now move back to IMG, Asset Accounting then Master Data. Here you go to the screen layout and pick the relevant asset class for AUCs. Get this logical feild group and pick on the item Investment Support. Proceed to define its feild group rule as optional at the required asset maintenance level (Main Asset and/or Sub Level)
6. Leave the IMG and access the relevant AUC's Master Data from the User Menu. Click the tab Investment Support and insert the Investment Support Key you created in note 2 above
7. Now capitalise the AUC. Should work

Change of Cost Center in Asset Master for Investment measure (AuC) Assets.

Hi,
We have an asset class 4001 which has been maintained as an investment measure for AuC. I want to change cost center for all the assets that are maintained in the asset class 4001. The system is showing cost center field in display mode in change transaction of the asset AS02 for all the assets in the asset class. I want to replace the old cost center with new cost center in the asset master record. How can I make the cost center field changeable ?
Can anyone help me ?
Regards,
K.S.K

Hi Kattula,
We can change the cost center for AUC with Investment Measure. To do this you need to identify the relevant WBS element assigned to your asset. You can find the WBSE in Origin tab of your asset master record.
Then go to the change WBS element Transaction CJ12 and change the cost center. Once you change the cost center of the WBSE, the change would automatically get reflected in the correspondind asset master record.
This would solve your issue.
Thanks & Regards
FICO GSupport team.
RK & IK.

What is Investment order in Asset Master

hi,
my client wants to have investment order in Origin Tab of asset master. is it just an internal order which will be settled against this asset, I noticed some settings in plant maintenance for investment orders, does this have any relevance to this investment order field.
Thanking u guys for giving reply to my previous query
urs
sai

Hi,
Good evening and greetings,
Please go through the following OSS Notes
Note 71079 - Investment acct. assignment fields for assets
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Order 23 is not a capital investment measure for Asset accounting(AUC)

Dear All,
Help This Error
For T Code Ko02 select order for AUC getting this error
Order 23 is not a capital investment measure
Message no. AY097
Diagnosis
Object concerned: Order 23 .
The object is not an investment measure, either because there is no investment profile entered for it, or the indicator "manage asset under construction" is not set in the investment profile.
System Response
Processing is not carried out.
Procedure
If you want to create assets under construction for the object, then enter an investment profile in the master data for the object.
Check if the the indicator "manage asset under construction" is set in the definition of the investment profile.
Replay solution ASAP
Regards
Nag
Edited by: Nagaraju Chagonda on May 24, 2011 1:18 PM
Edited by: Nagaraju Chagonda on May 24, 2011 1:19 PM

Hi Nag,
Please check if correction note 1165656 is valid to your release. It can correct this error.
Best Regards,
Vanessa.

Investment grants exceed APC in reference area 01 Msg AA683 in AFAB

Dear gurus,
After executing the T-code in AFAB to do a depreciation run, I've got the "testrun" page but it's empty
So I check the error log that indicates me this following message:
According to posting cycle, you should post period 001 next
     Message no. AA683
Diagnosis
     You cannot post depreciation in the period specified, as this will miss
     out a posting period.
System Response
     No posting can be made in this period.
Procedure
     According to the posting cycle, you should post period 001 next. Either
     enter period 001, which corresponds to the posting cycle, or request an
     unplanned posting run explicitly for this parameter.
Indeed, I entry the following datas, name of compagny/fiscal year (2009)/ and posting period (7). So I changed the posting period, and entered 001 in the posting period case. Now, the test run is ok BUT always empty.
Why is it empty?
Can someone help me to solve it?
Thanks for your answers,
Gül'

Hello,
to solve it, I did 2 things:
in the custumizing "define how depreciation areas post to general ledger" (in organizational structures => depreciation area).
then click the depreciation area that concerned, and for subvention investment grand select " all values allowed".
but, the problem occures again, so I check the value in asset explorer and I saw that the amount that I entered for this asset was to high, aslo I've created a new asset in AS01. Then, after entering the key of investment support measure, I checked an amount in abif that was correct. I'm doing exercices, so it's not a problem for me to create a new asset.
I don't know if you're doing exercices like me (I 'm doing an internship in order to learn how to use SAP) so I can create other asset but for a compagny it would be more difficult.
Tell me if you can solve the problem,
Gü

Creation of Assets for Capital Investment Measure

Hi,
Can some please tell me how to create an Asset for Capital Investment Measure.

Hi,
First you have to create master data using asset class AuC.
You have define asset class for Capital Investment Measure (AuC class) in t-code : OAOA. And still in the same t-code (OAOA), you choose "investment Measure" in box "Status of Auc".
If you choose "Investment Measure", the assets under construction in this asset class can be created solely in relation to capital investment measures (internal orders or WBS elements). So you cannot create and post in Asset Accounting directly (Example post using t-code : F-90).
If you use WBS Elements then you can post to the asset for Cap Invest Measure using t-code : CJ8G or CJ88.
Hope it can help.

What is the Differance Between AUC Assets & Investment Measure Assets?

HI,
1. What is the differance between AUC Assets & Investment Measure Assets? How to settle the Investment Measure AUC assets to main asset?
2. When i create the Internal Order, The system should automatically creates the Settlement rule for the AUC asset. I dont want to create settlement Rule Manually.
Kindly help me what should i do if the system wants to create the Settlement Rule Automatically? It would be a great help for me if you can provide some inputs..
Thanks
Kishore

Hi,
Would like to suggest, if you post this query in Asset Accounting Forum under SDN itself, you would get fast response.
Regards,

ABGL Post Credit memo for asset

Hi,
In transaction ABGL (Credit Memo in Invoice Year), I wanted to issue credit memo for price difference in acquisition of asset.
issue background:-
asset bought without PO (F-90), last year 2010
Now we want to post Credit memo for this asset.
Error hit:
Acquisition value negative in area 01.
Message no. AA617
What is this error message mean? How to resolve this?

Hi,
in OADB, our setting :-
Acquisition value = +
NBV = +
Investment grants = 0
Revaluation = 0
Ordinary depreciat. = *
Special Depr. = *
Unplanned Depreciat. = *
Transfer of reserves = -
Interest = 0
Revaluation ord.dep. = 0
I follow your step, i change acquisition value field to "-", it prompt me this message:-
Caution: generic values for real depreciation area (refer to long text)
Message no. AC246
Diagnosis
You set up depreciation area 01 so that all types of acquisition values are allowed. However, this only makes sense for derived depreciation areas.
System Response
Warning message. The system allows the setting, but note that it can lead to undesired effects for real depreciation areas.
Procedure
Check the setting.
I change theAcquisition value + to -?

Investment grant on asset

Similar Messages

Maybe you are looking for