Investment measure settlement doubles after investment profile change

We changed the indicator "Summary Settlement/Line Item Settlement" in Investment Profile (which was already used for Investment Measures) and "Amount and Percentage" indicator to allow the amount wise capitalization of AuC/Investment Measure on various fixed assets.
Now, while we try to settle the amount through CJ88, the system is settling the values that were already settled in previous periods. As a result the expenses become understated and Asset are over stated. How can we resolve this issue while we have already changed the Investment Profile as mentioned above.?

We are trying to settle March 2014 period therefore we can't carry out any new postings other than settlement.
For your reference, here is the Case:
EAC003 is an expense account and primary cost element
ABA001 is CWIP Account with Statistical Cost Element
The amount posted in March 2014 on account EAC003 is 323,813 which has value type 4 (Actual). When we run the settlement, the system settles the amount 3,053,065 (including 2,729,252 of value type 11: Statistical Actual)

Similar Messages

Hide the Investment profile in WBS - Control Tab

Hi,
Our project has four level of WBS elements. The fourth wbs element would have investment profile attached to it and would be relevant for AuC and settlement.
I request you experts to suggest how should I grey out the Investment Profile in WBS Control Tab, so that no one would by mistake enter a Investment profile, in only top 3 wbs elements.
Thank you
KAP

T Code OPUK- Field selection for WBS elements.
Double click on the field Investment profile (PRPS-IMPRF), position the cursor on level field and click on new value button. Mention the level 1,2 and 3 and select the radio button 'Invis' (Invisible). Save.
With this Investment profile field will not be displayed at level 1-3 but would be visible at level 4.
Regards
Sreenivas

WBS elements in Investment profiles

Hi Experts,
Is there any way we can check that to which all WBS element an investment profile is attached?
Regards,
Vijay

Hi Vijay,
If an inv. profile (or other customizing settings) is used somewhere, it must not be deleted in the customizing table, otherwise it cause database inconsistency.
To forbid the user to maintain this field at wbs, you can use the
customizing item
'Define Field Selection for Work Breakdown Structures' to hide\disable the filed. in the following path: Project System -> Structures -> Operative Structures -> Work Breakdown Structure (WBS) -> User Interface Settings.
Please reward points, if it is helpful.
Kind regards,
Zhenbo

Monitor Color Profile Changes after FUS

My monitor color profile changes after fast switching users, and then I cannot change it back in the prefs for display-color. Attempting to choose (restore) my chosen calibrated color profile does not work.
The only solution is restarting. Loging out and back in does not fix it, only a restart.
What could be causing this?
TiBook 867 1GBram 10.4.6 Mac OS X (10.4.6)

Does this page contain anything useful?
(16209)

Investment Profile

Hi
Could any please explain me the difference between CWIP and Investment Profiles. And please tell me the configuration required for the Investment Profiles.
Thanks & Regards
Ramki

Have a look in the SAP help in the part project or internal orders to understand how investments are working in SAP. You first need to undersatnad this befre you start
How to set this up is depended of your requerements. There are example profiles / order types in the system available.
Play with it in a sand box

Colour Profile change after Exporting a version

Hi
Has any one had this problem - and found a solution?
My Aperture Preferences are set to - Adobe RGB 1998.
Now,
1     -     if I select an image in Aperture then select EDIT WITH ADOBE PHOTOSHOP
                 the image is opened in p/s
                    when I view the image in Bridge
                         the colour profile is correct - Adobe RGB 1998
Problem:
2     -     if I select an image, then EXPORT A VERSION (to my desk top)
                    the colour profile changes to sRGB   ?
                    Don't understand why this is happening - anybody know why?
                         Thanks
                              Tony (from London)

The color profile is part of the export preset as Keith pointed out
Make sure the preset you are using has the color profile you want.
regards

First operation confimed - after system allowed changed order qty

Hi,
Production order first operation confimed - after user go change the produciton order qty, how to control this one, we need to config once first operation confirmed can't change the order qty. pls advise
ex : when create production order 10001234 qty 100 pcs, has oper 10,20,30,40
shop floor confirmed operation 10th 100pcs, after user change the qty 200 pcs, how to control this issue? pls
Thanks,
Sankaran

Hi Muthu
No need of exits , this can be done using status profile.
1>Create status profile using BS02.
2>give status no 10 as initial & 20 as the next .
3> in lowest & highest for 10 give as lowest 10 & highest 20 . For status 20 give lowest & hightst both as 20.
4> double click on status 10 & click on create & set what all business transactions u want to allow when the status is 10.
5> double click on 20 & tick on the radio button set against the partial confirmation button so that when the order is partially confirmed the status is automatically set to 20. in this status do not allow change prod order business transaction.
This should solve ur problem . Explore more about status profile in spro>production>SFC> order>create status profile documentation.
Thanks & regards
Prasad
Reward if useful.

Simulate DNG profile change via Photoshop

Hello everyone,
I have a RAW file and applied Adobe's default DNG Profile (via the Camera Calibration panel in Lightroom 2.6) and converted it to a PSD file so I can retouch the photo via Photoshop CS3.
After hours of retouching, I now want to apply a custom DNG Profile that I made from a Macbeth Color Checker. However, I'm not able to apply the profile to "already-rendered images" (http://labs.adobe.com/wiki/index.php/DNG_Profiles:FAQ#WhyOnlyEmbedded)
So my question is: Is there any way to simulate the effects of a profile change via Photoshop adjustments (i.e. HUE/SAT adjustments)?
Please feel free to let me know if more clarification is needed.
Thanks,
David

Hi Wolf,
Thanks, I really appericate your response. But I'm still not able to change the DNG Profile. Here are my steps in following your direction, please let me know where I went wrong:
1. I exported the retouched PSD file as a DNG file via Lightroom 2.6
2. I then opened the DNG file in Camera Raw via Adobe Bridge
3. At this point, I checked the "Open in Photoshop as Smart Objects" option and opened the file in Photoshop CS3
4. I then double clicked on the smart opject within Photoshop, and like you said, the file opened in Camera Raw again
5. However, when I go to the camera calibration panel, I am still not able to apply another profile; I only see an "Embedded" profile in the Profile popup menu and no other options.
Any advice would be much appericated.
David

I use a docking station and since I upgraded the screen is blurry most of the time before settling - since somthing is usually changing on a tab screen. This didn't happend before. Help please

It just seems to be taking an age to 'settle' after every minute change on a screen. I can't really continue to use it. Can I revert to the old version of firefox?

You can modify the pref <b>keyword.URL</b> on the <b>about:config</b> page to use Google's "I'm Feeling Lucky" or Google's "Browse By Name".
* Google "I'm Feeling Lucky": http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name": http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* http://kb.mozillazine.org/keyword.URL
* http://kb.mozillazine.org/Location_Bar_search

J2E instance not up/jcontrol.exe stopped after DB password changes

Hi,
i have changed my MAXDB user(SAPJ2EDB) password in config tool in secure store node (parameter: jdbc/pool/J2E/Password). After the password changes, when i re-started the server, my J2E instance is not started running. The jcontrol.exe file is stopped with the following trace log
trace file log
JStartupStartJLaunch: program = C:\usr\sap\J2E\JC02/j2ee/os_libs/jlaunch.exe
-> arg[00] = C:\usr\sap\J2E\JC02/j2ee/os_libs/jlaunch.exe
-> arg[01] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC02_us21217509
-> arg[02] = -DSAPINFO=J2E_02_bootstrap
-> arg[03] = -file=C:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
-> arg[04] = -nodeName=bootstrap
-> arg[05] = -nodeId=-1
-> arg[06] = -syncSem=JSTARTUP_WAIT_ON_3124
-> arg[07] = -jvmOutFile=C:\usr\sap\J2E\JC02\work\jvm_bootstrap.out
-> arg[08] = -stdOutFile=C:\usr\sap\J2E\JC02\work\std_bootstrap.out
-> arg[09] = -locOutFile=C:\usr\sap\J2E\JC02\work\dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC02_us21217509
-> lib path = PATH=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;C:\Program Files\Schlumberger\Smart Cards and Terminals\Cyberflex Access Kits\v4\;C:\Program Files\Executive Software\Diskeeper\;C:\usr\sap\J2E\SCS03\exe;C:\usr\sap\J2E\JC02\exe;C:\usr\sap\J2E\SYS\exe\run
-> exe path = PATH=C:\j2sdk1.4.2_08\bin;C:\usr\sap\J2E\JC02\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;C:\Program Files\Schlumberger\Smart Cards and Terminals\Cyberflex Access Kits\v4\;C:\Program Files\Executive Software\Diskeeper\;C:\usr\sap\J2E\SCS03\exe;C:\usr\sap\J2E\JC02\exe;C:\usr\sap\J2E\SYS\exe\run
[Thr 1708] Wed Jan 17 18:33:59 2007
[Thr 1708] *** ERROR => invalid return code of process [bootstrap] (exitcode=66) [jstartxx.c   1452]
[Thr 1708] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=66)
[Thr 1708] JControlCloseProgram: started (exitcode = 66)
[Thr 1708] JControlCloseProgram: good bye... (exitcode=66)
Bootstrp file log below
Bootstrap MODE:
<INSTANCE GLOBALS>
determined by parameter [ID0256613].
Exception occured:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:360)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:125)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:147)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
     at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:66)
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:419)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.sap.dbtech.jdbc.exceptions.DatabaseException: [-4008]: Unknown user name/password combination
     at com.sap.dbtech.jdbc.packet.ReplyPacket.createException(ReplyPacket.java:72)
     at com.sap.dbtech.jdbc.ConnectionSapDB.throwSQLError(ConnectionSapDB.java:852)
     at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:511)
     at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:375)
     at com.sap.dbtech.jdbc.ConnectionSapDB.doConnect(ConnectionSapDB.java:313)
     at com.sap.dbtech.jdbc.ConnectionSapDB.<init>(ConnectionSapDB.java:108)
     at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:189)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:219)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:577)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:263)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:302)
     ... 14 more
[Bootstrap module]> Problem occured while performing synchronization.
From the system log, i noticed ,
log.OpenSQLResourceBundle#SQL error occurred on connection : code={0,number,integer}, state="", message="".#5#-4008#08004#[-4008]: Unknown user name/password combination#jdbc:sapdb://us21217509/J2E?timeout=0&spaceoption=true&unicode=true#<null>#
because of the changes done by me in config tool, the username / password combination is not considered by the system properly i think. Anyways not sure what went on wrong ?
Any idea ?
Raja

If so , then how do i do it at database level .
Also today i noticed the simillar problem in SDN.but solution is not provided there
Changed password of SAPJ2EDB user, cannot start WAS 6.40 anymore
When i search sap.dom fo the same ( as per the above thread says ) , i could see few relevant documents(http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/14c93ec2f7df6ae10000000a114084/frameset.htm ) , but not able to follow the instructions. because i couldnt able to open the visual admin to create new user or group .
Any one have any idea ?
Thanks
Raja S

J2E instance not working / jcontrol.exe stopped after DB password changes

Hi,
i have changed my MAXDB user(SAPJ2EDB) password in config tool in secure store node (parameter: jdbc/pool/J2E/Password). After the password changes, when i re-started the server, my J2E instance is not started running. The jcontrol.exe file is stopped with the following trace log
trace file log
JStartupStartJLaunch: program = C:\usr\sap\J2E\JC02/j2ee/os_libs/jlaunch.exe
-> arg[00] = C:\usr\sap\J2E\JC02/j2ee/os_libs/jlaunch.exe
-> arg[01] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC02_us21217509
-> arg[02] = -DSAPINFO=J2E_02_bootstrap
-> arg[03] = -file=C:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
-> arg[04] = -nodeName=bootstrap
-> arg[05] = -nodeId=-1
-> arg[06] = -syncSem=JSTARTUP_WAIT_ON_3124
-> arg[07] = -jvmOutFile=C:\usr\sap\J2E\JC02\work\jvm_bootstrap.out
-> arg[08] = -stdOutFile=C:\usr\sap\J2E\JC02\work\std_bootstrap.out
-> arg[09] = -locOutFile=C:\usr\sap\J2E\JC02\work\dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC02_us21217509
-> lib path = PATH=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;C:\Program Files\Schlumberger\Smart Cards and Terminals\Cyberflex Access Kits\v4\;C:\Program Files\Executive Software\Diskeeper\;C:\usr\sap\J2E\SCS03\exe;C:\usr\sap\J2E\JC02\exe;C:\usr\sap\J2E\SYS\exe\run
-> exe path = PATH=C:\j2sdk1.4.2_08\bin;C:\usr\sap\J2E\JC02\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;C:\Program Files\Schlumberger\Smart Cards and Terminals\Cyberflex Access Kits\v4\;C:\Program Files\Executive Software\Diskeeper\;C:\usr\sap\J2E\SCS03\exe;C:\usr\sap\J2E\JC02\exe;C:\usr\sap\J2E\SYS\exe\run
[Thr 1708] Wed Jan 17 18:33:59 2007
[Thr 1708] *** ERROR => invalid return code of process [bootstrap] (exitcode=66) [jstartxx.c   1452]
[Thr 1708] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=66)
[Thr 1708] JControlCloseProgram: started (exitcode = 66)
[Thr 1708] JControlCloseProgram: good bye... (exitcode=66)
Bootstrp file log below
Bootstrap MODE:
<INSTANCE GLOBALS>
determined by parameter [ID0256613].
Exception occured:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:360)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:125)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:147)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
     at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:66)
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:419)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.sap.dbtech.jdbc.exceptions.DatabaseException: [-4008]: Unknown user name/password combination
     at com.sap.dbtech.jdbc.packet.ReplyPacket.createException(ReplyPacket.java:72)
     at com.sap.dbtech.jdbc.ConnectionSapDB.throwSQLError(ConnectionSapDB.java:852)
     at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:511)
     at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:375)
     at com.sap.dbtech.jdbc.ConnectionSapDB.doConnect(ConnectionSapDB.java:313)
     at com.sap.dbtech.jdbc.ConnectionSapDB.<init>(ConnectionSapDB.java:108)
     at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:189)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:219)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:577)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:263)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:302)
     ... 14 more
[Bootstrap module]> Problem occured while performing synchronization.
From the system log, i noticed ,
log.OpenSQLResourceBundle#SQL error occurred on connection : code={0,number,integer}, state="", message="".#5#-4008#08004#[-4008]: Unknown user name/password combination#jdbc:sapdb://us21217509/J2E?timeout=0&spaceoption=true&unicode=true#<null>#
because of the changes done by me in config tool, the username / password combination is not considered by the system properly i think. Anyways not sure what went on wrong ?
Any idea ?
Raja S

Hi,
You changed the password in J2EE instance , however maybe the change didn't go thru into the Database.
You need to change the database password, check this link
http://dev.mysql.com/doc/maxdb/en/ba/64b3403a493f5fe10000000a155106/frameset.htm
Regards,
Siddhesh

Intercompany Elimination is doubling after running Legal consolidation

Hi BPC Guru's
Intercompany Elimination is doubling after running Legal consolidation Data Manager Package 2nd time tripples when run 3rd time and so on..Only change is that for resolving an issue with balance carry forward, we had changed the datasource type property for the audit trail members that store the eliminated amounts ealier this was A (Automatic) we changed that to (Manual) M and this is causing the doubling to start because if i change it back to A then there is no doubling..but the eliminated values are incorrect.
Would be great somebody provides with their expertise.

Hi Arnold,
This issue is related to another issue that was discussed on the http://scn.sap.com/thread/3247090
Till December all was well. Come January, after I run the consolidation package, the rule takes into account the balance from December for each month’s calculation:
There were 2 suggestions from the above post that i tried:
Check if “COPYOPENING” property in the Audit Trail dimension should not be “Y” -> It was Y for me but changing it to “N” did not solve my issue.
Opening Flow should be assigned “FLOW_TYPE” property with the value of “OPENING”
Both these are done in my system. But still the above issue exists. I also tried to change the rule to “Periodic” type but did not help.
What I basically want is for BPC to ignore the values from previous year and run the calculation based on only the current month’s data.
When we first faced this issue during January closing, as a temporary fix, we changed the “DATASOURCE_TYPE” property of the audit members used in Eliminations from A to M. This made the rule not consider December balances in the calculation.
But doing this gave rise to the doubling issue.
Any suggestions?
Regards,
Shruti

Simulating DNG Profile changes in PSD file

Hello everyone,
I have a RAW file and applied Adobe's default DNG Profile (via the Camera Calibration panel in Lightroom 2.6) and converted it to a PSD file so I can retouch the photo via Photoshop CS3.
After hours of retouching, I now want to apply a custom DNG Profile that I made from a Color Checker. However, I'm not able to apply the profile to "already-rendered images" (http://labs.adobe.com/wiki/index.php/DNG_Profiles:FAQ#WhyOnlyEmbedded)
So my question is: Is there any way to simulate the effects of a profile change via Photoshop adjustments (i.e. HUE/SAT adjustments)?
Please feel free to let me know if more clarification is needed.
Thanks,
David

I thought I'd posted a reply but I failed to make it stick, somehow. Anyway, thanks Jim for that. Makes perfect sense.
Except I've just had a further thought. Why would Adobe change a file name to distinguish between color spaces if DNGs/RAWs are color-space agnostic? Where it would make sense is with jpegs, but name-changing doesn't happen there, of course, as there's no conversion taking place.

Workflow notification mailer not starting after APPS pwd change

Workflow notification mailer not starting after APPS pwd change
The error in the WFMAILER log is
[appprod@nalinoes04 ABPROD_nalinoes04]$ cat WFMAILER1300061.txt
wferr:
- WFXXX_DB_CONNECT CODE=1017 CONNECT=APPS
cpid=1300061, logfile=/abprod/comn/admin/log/ABPROD_nalinoes04/WFMAILER1300061.txtparams=, status=Running, debuglevel= Error Done.[appprod@nalinoes04
Can you please advice ?
EBS 11.5.10.2
DB 11.2.0.1

There is no upgrade, just a usual APPS password changeYou still need to bounce the application services.
The error you have posted above does not tell much about the issue. Please clear the log file, reproduce the issue, and check the log file then.The FNDCPGSC log file
[Oct 23, 2012 12:42:42 PM CDT]:1351014162195:Thread[BES Dispatch Thread,5,main]:0:-1:nalinoes05:172.25.80.54:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-1327162 : oracle.apps.fnd.cp.gsc.SvcComponentStateMachine.updateComponentStatus(Logger, Connection, int, String, String)]:BEGIN (Logger{mLog=[$Header: AppsLog.java 115.76 2004/07/27 17:30:17 kkapur ship $ @16720915 {oracle.apps.fnd.profiles.ExtendedProfileStore@9980d5}],mUniqueId=SVC-GSM-WFMLRSVC-1327162,mLevel=4}, oracle.jdbc.driver.OracleConnection@76ab2f, 10006, DEACTIVATED_SYSTEM, This automatic Service Component has been restarted the maximum of 10 times after stopping with error. Thus, it has been system deactivated -> oracle.apps.fnd.cp.gsc.SvcComponentContainerException: Could not start component; performing rollback -> oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters -> {OUTBOUND_SERVER=Unable to make a network connection.}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, SEND_UNSOLICITED_WARNING=Y, AUTOCLOSE_FYI=Y, INBOUND_PROTOCOL=IMAP, PROCESSOR_READ_TIMEOUT_CLOSE=N, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, TEST_ADDRESS=NONE, PROCESSOR_OUT_THREAD_COUNT=1, EXPUNGE_ON_CLOSE=Y, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:XXAB_OPEN_IBE_WF_MAIL, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=_!08^@@690^6@6$$^#9^#6#!0$04868!@$^86$!!`}0$8|&%%+++|9|*@, HTTP_USER_AGENT=Mozilla/4.76, RESET_NLS=N, PROCESS=PROCESSED, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, ACCOUNT=svc_oracle_mail, DISCARD=DISCARD, FROM=ACCO Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, SEND_CANCELED_EMAIL=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=120, HTMLAGENT=http://nalinoes04.abd.ad.acco.com:8000/pls/ABPROD, INBOX=Inbox, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, INBOUND_SERVER=lin-hera.na.acco.com, OUTBOUND_SSL_ENABLED=N, OPEN_MORE_INFO=WFMAIL:OPEN_MORE_INFO, MAILER_SSL_TRUSTSTORE=NONE, INLINE_ATTACHMENT=N, OPEN_INVALID=WFMAIL:OPEN_INVALID, EMAIL_PARSER=oracle.apps.fnd.wf.mailer.TemplatedEmailParser, DIRECT_RESPONSE=N, OPEN_MAIL=WFMAIL:OPEN_MAIL, MORE_INFO_ANSWERED=WFMAIL:MORE_INFO_ANSWERED, HTML_DELIMITER=DEFAULT, FRAMEWORK_URL_TIMEOUT=30, COMPONENT_LOG_LEVEL=5, SUMHTML=WFMAIL:SUMHTML, PROCESSOR_READ_TIMEOUT=10, DEBUG_MAIL_SESSION=Y, OUTBOUND_SERVER=nalinoes04.abd.ad.acco.com, INBOUND_SSL_ENABLED=N})
Please see these docs.
How to Troubleshoot 'Validation failed' Errors when Starting the Mailer [ID 463354.1]
Unable To Make A Network Connection For IMAP Username/Password In Workflow Mailer Configuration [ID 784247.1]
Workflow Cannot Connect to IMAP Sever: "Unable to Make a Network Connection" [ID 577592.1]
Error Validation Error Has Occurred: Unable To Make A Network Connection During Mailer Setup [ID 834054.1]
Unable To Connect To The Mail Account. Check The Host, User Name And Password [ID 1123684.1]
How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer For Sending Email Notifications [ID 753845.1]
Workflow Mailer Will Not Start Stays In Starting Status [ID 837893.1]
Thanks,
Hussein

After use AffineTransform change also width of stroke

Hi, may be you can help me. After use AffineTransform change also width of stroke. I want to paint a function graph and calculate that values but tje width of pen is also changed. May be, do I something incorrectly.
import javax.swing.*;
import java.awt.*;
import java.awt.geom.Rectangle2D;
import java.awt.geom.AffineTransform;
import java.awt.geom.Point2D;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
import java.awt.print.*;
public class MyFrame extends JFrame {
     public static final double MM_TO_PAPER_UNITS = 1 / 25.4 * 72;
     public static double widthA4 = 210 * MM_TO_PAPER_UNITS;
     public static double heightA4 = 297 * MM_TO_PAPER_UNITS;
     public static double leftMargin = 4.0 * MM_TO_PAPER_UNITS;
     public static double topMargin = 4.0 * MM_TO_PAPER_UNITS;
     JButton button;
     MyPanel panel;
     GridBagConstraints gridBagConstraints;
     public void init() {
          panel = new MyPanel();
          button = new JButton("Print");
          getContentPane().setLayout(new GridBagLayout());
          setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
          gridBagConstraints = new GridBagConstraints();
          gridBagConstraints.fill = GridBagConstraints.BOTH;
          gridBagConstraints.weightx = 1.0;
          gridBagConstraints.weighty = 1.0;
          add(panel, gridBagConstraints);
          gridBagConstraints = new GridBagConstraints();
          gridBagConstraints.gridx = 0;
          gridBagConstraints.gridy = 1;
          add(button, gridBagConstraints);
          setSize(500, 500);
          button.addActionListener(new ActionListener() {
               public void actionPerformed(ActionEvent e) {
                    PrinterJob printJob = PrinterJob.getPrinterJob();
                    PageFormat pf = printJob.defaultPage();
                    pf.setOrientation(PageFormat.LANDSCAPE);
                    Paper paper = pf.getPaper();
                    paper.setSize(widthA4, heightA4);
                    paper.setImageableArea(leftMargin, topMargin, widthA4 - 2
                              * leftMargin, heightA4 - 2 * topMargin);
                    pf.setPaper(paper);
                    printJob.setCopies(1);
                    Book book = new Book();
                    book.append(panel, pf, 1);
                    printJob.setPageable(book);
                    if (printJob.printDialog()) {
                         try {
                              printJob.print();
                         } catch (Exception PrinterExeption) {
                              PrinterExeption.printStackTrace();
          setVisible(true);
     public static void main(String[] args) {
          MyFrame myFrame = new MyFrame();
          myFrame.init();
     class MyPanel extends JPanel implements Printable {
          final int leftPadding = 20;
     final int rightPadding = 10;
     final int topPadding = 10;
     final int bottomPadding = 20;
          protected void paintComponent(Graphics g) {
               super.paintComponent(g);
               Graphics2D g2 = (Graphics2D) g;
               paingMyGrafik(g2);
          public int print(Graphics graphics, PageFormat pageFormat, int pageIndex) {
               Graphics2D g2 = (Graphics2D) graphics;
               // affine transformation for grip of the panel`s content to the size
               // A4
               double W = pageFormat.getImageableWidth();
               double H = pageFormat.getImageableHeight();
               double minX = pageFormat.getImageableX();
               double minY = pageFormat.getImageableY();
               g2.transform(new AffineTransform((W) / this.getWidth(), 0, 0, (H)
                         / this.getHeight(), minX, minY));
               paingMyGrafik(g2);
               return 0;
          private void paingMyGrafik(Graphics2D g2) {
               // here paint i my grafik
               AffineTransform old = g2.getTransform();
               g2.transform(toEndCoordinate());
               BasicStroke stroke = new BasicStroke(0.2f, BasicStroke.CAP_BUTT,BasicStroke.JOIN_MITER);
     g2.setStroke(stroke);
               g2.drawLine(1899, 20, 1901, 20);
     g2.drawLine(1901, 20, 1901, 25);
     g2.drawLine(1901, 25, 1905, 26);
               g2.setTransform(old);
          private AffineTransform toUsualyCoordinate(){
AffineTransform at = new AffineTransform();
//mirror reflection relative to ox
at.concatenate(new AffineTransform(1,0,0,-1,0,0));
//parallel shift (x,y) -> (x, y-h)
at.concatenate(AffineTransform.getTranslateInstance(0,-this.getHeight()));
return at;
private AffineTransform toEndCoordinate(){
AffineTransform at = new AffineTransform();
at.concatenate(toUsualyCoordinate());
at.concatenate((new AffineTransform((double)(this.getWidth()-leftPadding-rightPadding)/this.getWidth(),0,0,(double)(this.getHeight()-topPadding-bottomPadding )/this.getHeight(),leftPadding,bottomPadding)));
at.concatenate(new AffineTransform(-this.getWidth()/(getMinX()-getMaxX()-2),0,0,this.getHeight()/(getMaxY()-getMinY()+10),this.getWidth()*(getMinX()-1)/(getMinX()-getMaxX()-2),-this.getHeight()*(getMinY()-5)/(getMaxY()-getMinY()+10)));
return at;
          private int min(int a, int b) {
               return (a < b) ? a : b;
          private double getMinX(){
               return 1900;
          private double getMaxX(){
               return 2000;
          private double getMinY(){
               return 20;
          private double getMaxY(){
               return 30;
}

The right answer is here ( http://www.javable.com/forum/thread.jspa?messageID=100080&#100080)
It is necessary to apply BasicStroke before use AffineTransform.
GeneralPath gp = new GeneralPath();
g2.setStroke(stroke);
gp.lineTo((float) xval, (float) yval);
g2.draw(gp.createTransformedShape(transform));--------

Investment measure settlement doubles after investment profile change

Similar Messages

Maybe you are looking for