Invisibile external HDD connected from the USB port.

heya guys ive got a problem getting my maxtor external hdd to show on my mac.
yesterday it was working (well, it was only letting me download files from the drive to my macbook) but today its not showing as being connected to my macbook at all!!
the only difference is that today i downloaded the software updates from the company for the drive. any suggestions??
thanks!

I had a similar problem. I had to unplug my drive from the mains to reset it. Just turning it off did not do anything. Hope this helps.
Mort

Similar Messages

I yanked my external hard drive from the USB port by accident. Is everything lost?

I can't believe I did what I did. I always unmount properly. Regardless, I can't go back in the timeline and see my backups. I checked "get info" in the Finder and the data is still on the external hard drive. I also verified the disk and everything came back as "okay".
Can someone please tell me if I can correct what I did, or have I lost everything.
Thanks,
Betty

Hi,
As I suggested to shutdown and reboot your Mac ... is okay, but you need to shutdaown your External HD Backup to.
Shutdown everything ... Mac and Ext-HD.
Now plug-in the Ext-HD again ... NO POWER.
Now reboot your only your MAC.
Now power up your Ext-HD ... wait and see what happens.
Post back ...
Dimaxum

Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?

Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?
a) HP printer with USB port only (no ethernet port) connected to Airport Express
b) No issue printing from Macs
Tests
1) Installed Bonjour 2 - does not find printer (now uninstalled)
2) Bonjour 3 is listed in programs but no way to access
3) Using TCPIP address (and no Bonjour) gives 'Unsupported Personality' error when printing test page
Regards
Richard
p.s. why are all Windows 8.1 questios n the forum 'Locked' with no reply?

This is possible, but not with Bonjour or any other fixes. It is just a printer set up based on the Port name of the Airport, 10.0.1.1.
I found the answer on YouTube, Title: Windows Printing For Apple AirPort Extreme without Bonjour Wireless wifi.

HT1338 Does anyone have a fix for the error message "Because a USB device was drawing too much power from your computer one or more of your USB devices have been disabled" - this is a brand new machine with nothing connected to the USB ports - i've done u

Hi
does anyone know how to fix the message on my iMac:
"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
This is a brand new machine and did not have anything attached to the USB ports"
Thanks for any help

If you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.

HT4356 I have an older HP connected to the usb port of my Time Machine, and have it shared. I want to print from my iPhone on the network, but it can not be found in airport? How do I make this work?

I have an older HP connected to the usb port of my Time Machine, and have it shared. I want to print from my iPhone on the network, but it can not be found in airport? How do I make this work?

AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
Read through this for information about Airprint printers and how to use them:
http://support.apple.com/kb/ht4356

TS2776 I can synch items entered into MS calendars to my iPad... this is done automatically when I connect to the USB. How do I synch items initially entered into my iPad to MS Calendars when the unit is connected to the USB port???

Cannot tell is the initial question was sent so here goes again. I can synch items entered into MS Calendars with my iPad... this is done automatically when I connect the iPad to the USB port. Can I synch items entered into the iPad calendar to the MS Calendar when the iPad is connected to the USB port??? if so how???

I have found an alternative and much quicker way to transfer photos to my ipad. Having exhausted the Apple route with its connection kit, I stumbled upon a YouTube video showing how you could use an external sd card reader / USB to transfer pictures. I did a quick search on eBay and found a device that would work with the ios7 update. Hey presto it works! (I purchased an sd card and a sd card adapter for my Canon 350d) plus the little sd card reader from eBay ( for quarter of the price ) of Apples connection kit ( which didn't work)
Come on Apple why can suppliers in the Market place produce accessories that work better than your own kit? You are missing an opportunity and frustrating customers no doubt. Could do better !

Time machine has losing contact with my external drive, connected via a USB port.

Recently my Time Machine program has begun losing contact with my external drive, connected via a USB port. When I attempt to open Time Machine, it indicates there is no external hard drive. When I click on "setting up time machine" it opens airport utility. I've tried rebooting, run disk utility repairs for both hard discs, pulled and reconnected the USB cable, even completely shut down the system. Eventually the two re-establish contact, but I'm not certain what I've done that causes this. The lost contact appears to happen during the weekends. The external hard drive is a MJaxtor OneTouch 4. What should I be doing to solve this problem once and for all?

I use a little app named EasyFind - free at the App Store. It will allow you to search individual volumes or all volumes.
Download it and see if it will help.
Clinton

Why can I no longer use my exterior speakers connected to the USB port on my MacBook pro

QuestionWhy can I no longer use my exterior speakers connected to the USB port on my MacBook pro ?

Have you checked the Sound Preferences under the System Preferences and set it to USB speaker for the sound output? Sometimes it can change on its own or after and update of an App or the OS?

Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

Hey Guys!
I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
Can you help me? Please?!
Thanks Folks!

This must be a tough one, no suggestions at all.

Does anyone get the mouse lag with an external display connected via the display port?

does anyone get the mouse lag with an external display connected via the display port?

You don't describe the problem in great detail. Is this the issue you are describing?
https://discussions.apple.com/thread/4398076?start=0&tstart=0
If so, then, "Yes." I have the same problem. Note that this isn't a tracking speed problem for me, it's a lag between my hand moving and the pointer moving on the external display.
Andrew

My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.

My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.

This didn't work for me, so I did a bit of searching and TONS of pages later in google, I found an answer. Here are the steps for people who also were in my situation:
1. Take off bottom case
2. Unplug battery - blurry image here: http://i.ytimg.com/vi/03cC79r5Dx4/0.jpg
3. Press and hold power button for 5 seconds
4. Plug a charger in, and it should start booting up
5. After shutting down again, reconnect the battery and close the case up
6. It works! (hopefully, if you guys had the same situation I did)

Printing from MacBook Pro to a Printer Connected to the USB Port on A MacG5

November 17, 2009
Apple Tells Me: It is completely valid to connect the HP 4360 printer (not wireless) to the USB Port of my MacG5 and print pages from my MacBook Pro if I select Print Share in the Apple Preferences of my MacG5. The MacBook Pro and MacG5 are connected through a Router and a wired Local Area Network through a Router.
HP Tells Me: Since the D4360 is not a wireless printer and since it is not supported to print from a MacBook Pro on the same wired local area network also connected to a MacG5 computer. In particular, they said that use of the Print Share option on the MacG5 to print from the MacBook Pro will cause damage to the HP D4360 printer or print driver and when this occurs it will invalidate the warranty on the HPD4360.
Questions:
1. Is there any validity to the HP answer on this subject??
My analysis to date says that the Apple statement is 100% true, with the exception that if the driver is damaged it can be restored without any damage to the printer.
2. Is there any documentation of the HP concern?

Is there any validity to the HP answer on this subject?
No. It's very difficult for any software to damage a hardware component, and on the rare case the driver becomes damaged, which is also highly unlikely, it won't affect the printer's warranty.
(48665)

My 80gb IPOD classic will connect to and then immediately disconnect from the USB port in my BMW 528i. My wife's works fine in the same car. I can't se any difference.

This an IPOD I bouth used. Everything esle works fine. It syncs to my computer and plays my music but will not connect to the USB interface in my car. My wife's IPOD, which seems to be identical, works fine. Any ideas?

This is the iPad forum - try asking in the iPod classic forum.
https://discussions.apple.com/community/ipod/ipod_classic

What's the most recent opinion about Time Machine backups to Hard Drives connected to the USB port on the Airport Extreme Base Station (5th generation)?

I have been searching the Apple communities and Internet for a final answer. I just bought an Airport Extreme Base Station (5th generation) and LaCie d2 quadra 1TB external drive as a replacement for TWO failed Time Capsules, neither of which Apple would replace due to failed power supplies. I formatted the 1TB drive using Disk Utility (Mac OS extended (journaled)) from my MacBook Pro, and then plugged into the Airport Extreme Base Station USB port. The Airport Extreme Base Station see the Hard Drive, and my MacBook Pro sees the Hard Drive in my finder under shared resources. Time Machine, however, does not see the drive. Is there a solution for this problem? If Time Machine will not work, is there another software product out there that will work, like Carbon Copy. Having to plug the backup drive into the USB port of your laptop every evening kind of defeats the purpose of having a laptop. Any suggestions would be appreciated.

Keeping in mind that this is not supported by Apple, I have been successful at doing the following:
1) Format the entire drive (1 Partition) as Mac Extended (Journaled). You must click in Options and set it as a GUID Partition Table (first option)
2) Plug drive via USB to AEBS
3) Using Airport Utility, use Manual Setup, then under Disks, select the new Disk and click File Sharing, then Enable File Sharing and Secured Shared Disks (recommended, of course). Other settings are up to you.
4) IMPORTANT: you will NOT see this Disk in Time Machine until you open Finder and double-click on it. You will not need to do this again (hopefully).
5) Now it should appear in Time Machine. Remember to exclude any large files like Virtual Machines, since they will be re-backed-up (is that a word?) every time it changes in any way.
6) Remember that the first backup (over WiFi) is the longest. Leave the computer alone during this period.
Good luck, and let us all know how it went for you!

My Macbook air 2011, one line of key board (a to l) do not respond, but when an external keyboard is hooked up these keys starts functioning as normal, after disconnecting the external key board (from the USB) the problem comes back...Please help. Thank y

My Macbook air 2011- key board (a-l) do not respond, but when you hook up an external key board to the usb these keys on the computer also starts functioning as normal and when you disconnect the external key, these keys stops functioning...?

Perform SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

Invisibile external HDD connected from the USB port.

Similar Messages

Maybe you are looking for