Invisible files

Hi All,
I hope you can help.
I have currently upgraded form adobe CS4 to CS5.
When i save files from illustrator to my external HD they are invisible??. I had no problems in CS4.
I'm really not sure what could of altered.
Thanks Andy.

Strange but just noticed this same problem within our workgroup.  Typically we do not save directly to the network drive.  But one of our workstations went down and we noticed this issue when working around the problem of the lost workstation. 
Set up is the same as listed - ( snow leopard, Lacie 2big, Adobe Illustrator..).  Did anyone get any clues to solving this problem at the creation of the file stage?  Viewing invisible files with terminal commands or 3rd party apps is nice.  But how do you stop the problem of the creation of the invisible file in the first place?
-d

Similar Messages

  • How to delete invisible file created by iPhoto

    I use MacBook and keep my iPhoto library on external hard drive. External disk got disconnected accidentally and I was requested to import the library again.
    I imported library from my external drive but the file created by iPhoto is not visible and I cannot find it either in folder Pictures or using Spotlight. However, I can see that available space on my MacBook hard drive is reduced for 10GB, which is actually the size of my iPhoto library.
    Any suggestion how to find invisible file created by iPhoto and delete it from the hard disk on my computer? Many thanks for your help.
    Haris
    MacBook   Mac OS X (10.4.7)  

    Do a Spotlight search for "Library6.iPhoto" on your boot drive and that will tell you where the iPhoto LIbrary is hiding.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • How do I find and delete invisible files?

    Mac Hard Drive info window says 157.58 GB used and 159.56 GB capacity, leaving 1.99 available. 
    Total for all folders in Mac HD is 133.344 GB.
    14.13 GB  Library
    04.81 GB System
    114.4 GB Users
    16.58  GB Applications
    .004   GB  User Guides and Info
    I appear to missing about 20 GB storage that I desperately need.
    What is going on?
    How do I clear out "invisible file" if that's what's taking up the 20 gigs?
    How do I prevent this from happening again?
    Please advise.
    Thank you. 
    I have a MBPRO 2.26 running OSX 10.6.8

    Thanks so much  for your response.
    Do you have any idea why there are 20 GB unaccounted for?
    My hard drive seems to fill itself up continouously...I'd like to figure that one out.
    Yes...Getting a larger HD is a great idea.
    Does having a large HD impair performance?
    I am thinking about getting a 1.5 TB Seagate Barracuda.
    http://www.amazon.com/Seagate-Barracuda-3-5-Inch-Internal-ST1500DM003/dp/B005T3G RPU/ref=aag_m_pw_dp?ie=UTF8&m=AVCN3MVCVULPH

  • How can I remove a doubly-invisible file?

    My external drive has a 28GB invisible file on it called "Volume Catalog Info". The finder says the disk is full, but won't reveal the file, even with all files made visible.
    The way I found the monster file was using DiskSurveyor 2.5 under Classic. I'd think it was imagining things, except that the Finder agrees that the disk is full. My 2 folders on the drive (no system files) add up to the same 28GB short of the size of the disk. I made all files visible using Terminal ("defaults write com.apple.Finder AppleShowAllFiles 1") but besides the 2 folders mentined, there's nothing new shown of any size, only the following: Desktop DB 16KB, .DS_Store 8KB .TemporaryItems folder 8KB, Desktop DF 4KB, and .Spotlight-V100, .Trashes, Desktop, and Desktop Folder, all at Zero KB.
    Since Terminal doesn't reveal the file either, how can I remove it?
    Thanks!

    I appreciate the help and think this may have been a case of operator error. In searching the web I found someone with the same problem, but I now think I had the wrong idea of my actual disk size! So DiskSurveyor showed this mega-file, but just as a side-effect of its being an OS9 program. No mega-file, nothing to delete, red face.

  • External Drive with invisible files

    I have a MAC OS Extended format hard drive that I am attempting to clean up to make room for transfering some data. I have removed all the visible folder and files, but both finder and Disk Utility show that there are over 173 GB of data (over 2 million files) still on the volume. The drive is a 500 GB LaCie that I partitioned into two equal parts of 250GB. The other Partition was used exclusively for TM Backups.  I want to reformat the drive ( the old back up partition I dont care about). but I am afraid of erasing files that I can't see.
    Is there such a thing as an invisible file?
    How can I find out what they are and why they are taking up so much of the drive?
    I did run DU to Verify the volume and it checks out with no errors.
    It is possible that they could be windows files that we used with Parallels at one time. But we no longer use Parallels. I would think that I would be able to see them even if I can't open the files.
    I am running Lion on an iMac. The external drive is connected with firewire.

    If you want a cleared (erased) unpartitioned 500 GB drive, then do this:
    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select the hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    Yes, there are invisible files. The OS has thousands of them that are kept invisible to the user.

  • How can I search for invisible files?

    When I was using OS 10.3.x I could search for .DS_Store and .localized files (or any other invisible file) in the finder, using Search. But since I've been using OS 10.4.x I can't seem to find those particular files in the Search window anymore.
    In both OS 10.3.x and 10.4.x I will set the search options to 'Visibility' -> 'Visible or Invisible'. But only 10.3.x will find invisible .DS_Store and .localized files, 10.4.x will not bring them up.
    I know the files are there, I can make them visible with utilities like Invisibility Toggler. But that involves me manually going through each folder and deleting the invisible files one at a time. Is there any way to make those invisible files show up in the Search window?

    Spotlight doesn't find invisibles very well and it won't find anything in the System folder. Instead download the freeware search program Easy Find - VersionTracker or MacUpdate.

  • Spotlight doesn't find invisible files in Yosemite

    Spotlight, under Yosemite 10.10.2, does not find invisible files, even when specifically requested to do it. The results window is empty.
    Besides that, the insible property has disappeared from the Finder information windows:

    Open System Preferences > Spotlight. Under the 'privacy' tab, drag your HD into the list from a Finder window. As soon as it's in the list, remove it.
    Spotlight will now begin to reindex your entire HD. You'll see a dot in the middle of the spotlight icon and clicking the icon will tell you that it's re-indexing.
    Regards,

  • Is there a way to get Automator to select invisible files?

    I need a way to get Automator to be able to select invisible files. Does anybody know a workaround?
    Shift-Command-Period doesn't do anything (except make a beep).

    The regular Automator actions typically use the current Finder settings, so (depending on your workflow) you can temporarily set the Finder to show all files (including invisibles) and reset it when you are done, or you can use a *Run AppleScript* action to put up a file choice dialog that includes invisible items.

  • Is There A Simple Way Of Deleting Invisible Files?

    There's an invisible file/folder that I need to delete but don't know how. Instructions about how to do it that I've come across seem rather unclear.
    Is there a rather simple way of deleting Invisible files?

    If you know the name of the file/folder you can use the free Easy Find
    http://download.cnet.com/EasyFind/3000-2248_4-8707.html
    You can also use the free TinkerTool to turn on all invisible files, then do what you have to do, then turn invisible files off.
    http://bresink.de/osx/TinkerTool.html

  • How to see invisible files

    How do you see invisible files on the romote side of the site
    window? I've got some .htaccess files, which are supposedly
    invisible on the Mac system, though they're visible on my local
    site window. If I upload them, I can see them until I quit
    Dreamweaver, then I can't see them. These files control access to a
    site and if I can't see them I can['t delete them. So now I'm
    locked out of my site.

    What DW version are you using?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "dkd;alkje;oihp[oihjl" <[email protected]>
    wrote in message
    news:eimkq6$2q3$[email protected]..
    > How do you see invisible files on the romote side of the
    site window? I've
    > got
    > some .htaccess files, which are supposedly invisible on
    the Mac system,
    > though
    > they're visible on my local site window. If I upload
    them, I can see them
    > until
    > I quit Dreamweaver, then I can't see them. These files
    control access to a
    > site
    > and if I can't see them I can['t delete them. So now I'm
    locked out of my
    > site.
    >
    >
    >

  • Find and sort all files in folder without invisible files

    Hi all,
    I am trying to check whether the newest file added to a folder is an HTML file. In theory the folder should be empty when a new file is added because the script will delete all files in the folder just before it finishes running.
    However, I am having a problem with .DS_Store files being created automatically in the folder. When Finder accesses the folder it creates a new .DS_Store file and thus the newest file added to the folder is never an HTML file.
    I believe that the command "without invisibles" could help me with this problem. However, I have not been able to implement this successfully. I would appreciate if someone could please point me in the right direction. Here is what I have so far.
    tell application "Finder"
              set sortedFiles to reverse of (sort (files of thisFolder) by modification date) as alias list
              set newestFile to item 1 of sortedFiles
    -- check if newestFile is an HTML file
    -- read file and send contents to another application
    end tell
    Thanks for your help!
    Message was edited by: dsbird

    Errr...  A quick reality check is called for. If you make files visible to the finder then they are no longer invisible files, so ignoring invisible files won't help you one bit. your best bet is to do a manual check for a file that starts with a "." (which would normally be invisible):
    tell application "Finder"
              set thisFolder to folder "Pictures" of home
              set sortedFiles to (sort (files of thisFolder) by modification date) as alias list
              set newestFile to last item of sortedFiles
              if name of newestFile starts with "." then
                        set newestFile to item -2 of sortedFiles
              end if
    end tell

  • Cannot find invisible files or folders any more

    Find or Spotlight used to be able to find invisible or hidden files, folders, etc. This is key for some purposes.
    Now it doesn't work. I can list hidden files or folders in terminal, but cannot find them at all using Spotlight, even when I know they are there. For example, searching for Name Contains private AND Visibility is Visible or Invisible returns nothing, even though ls -a returns private/ as one of the folders at root level.
    Does anyone have an explanation for this change in behavior, or a fix? Using a utility like TinkerTool is not a satisfactory workaround, because searching still fails even when hidden files are shown in the finder.

    Hi, j.e.s.
    First, we need to define hidden and invisible files, as they are distinct:
    • A hidden file is one whose file name begins with a period (.) . Example: a file named ".hidden" would not show up in Finder. This is a UNIX® standard.
    • An invisible file has its invisible file-system attribute enabled.
    A file can be both hidden and invisible, e.g. its name begins with a period and its invisible file-system attribute enabled.
    Now, as to searching for these with Spotlight:
    • By default, Spotlight neither indexes nor searches either hidden or invisible files.
    • The Find criterion for Visibility does not work. Find under Tiger is implemented in Spotlight. That the Visibility criterion does not work extends beyond the facts that Spotlight does not index hidden or invisible files nor will it search (with the exception of Raw Queries using criteria based solely on file system metadata) outside of its index. The function simply does not work. Even using a raw query to search for invisible files, when compared to using the Spotlight mdfind Terminal command, produces inconsistent results.
    I have an entire appendix in the Tiger Edition of my book — from the info above is provided — that demonstrates all of these anomalies with Spotlight concerning searching for hidden and invisible files.
    Your best bet for searching for hidden or invisible files under Tiger is to use EasyFind.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • ITunes 10 & 9/ invisible files on iPod mini

    I downloaded some files to my laptop from iTunes U:The Library of Congress; 15 files total. Everything was fine for DL, setting Remember playback position, and Part of a gapless album in iTues info, which is my usual practice for spoken word files.
    Once copied to the iPod mini, the files played Ok, but when I re-connected the iPod to my laptop, the files were not visible in the Devices:iPodName:Music folder, or Podcasts folder, or anywhere else on the iPod! Thinking that this might be a problem with iTunes 10, I just got back home and tried it with my desktop G4 running iTues 9, but they are still invisible. This is downright weird. The files remain visible when the iPod is not connected to a computer.
    The only place I see remaining for the trouble to be is in a conflict between the files themselves and the iPod mini software. No iPod software update has been seen for a long time. When clicking on the iPod's 'Check For Update' button, an error window opens saying: 'The iPod software update server could not be contacted', yet the computer is connected to the web.
    Running software version 1.1.3 on my iPod mini, iTunes 10 on my laptop, and iTunes 9.2.1 on my G4 desktop

    I'm trying to access the iPod via the Terminal, clearly the data is encoded, but while I don't understand the code, the invisible files stand out.
    I've been stepping through iTunesDB via 'more':
    [/Volumes/apollo/ipod_Control/iTunes]:more iTunesDB
    ^@^@^@Y^@^@^@^O^@^@^@^@^@^@^@^@^@^@^@http://www.loc.gov/podcasts/musicandthebrain/podcast_
    brandes.htmlmhod^X^@^@^@k^@^@^@^P^@^@^@^@^@^@^@^@^@^@^@http://deimos3.apple.com/WebObjects
    /Core.woa/Feed/loc.gov-dz.4399572730.04399572732mhitH^B^@^@<E9>^G^@^@^L^@^@^@<C8 >^U^@^@^A
    The web address above is the only text that's shown all in one piece in this code. All the rest of the text is displayed one character at a time, separated as above. Does that tell anyone anything? How am I going to get these files off my iPod?

  • How do i hide invisible files?

    I have .DS_Store, an invisible file now on my screen. It's an invisible file! How do I make it go away and be invisible again?

    defaults write com.apple.finder AppleShowAllFiles 0; killall Finder
    copy the entire line above & paste it into Terminal, press enter.

  • Finding invisible files

    I had Imagemagick working perfectly fine but I got my Mac unusable so I reinstalled Leopard and did all updates and put back my user folder from time machine. When I try:
    $ montage *.jpg -tile 8x4 -mode Concatenate a.gif
    I get:
    -bash: montage: command not found
    I think I remember I put something in a .bashrsc
    Can I find an invisible file in Time Machine?
    If not, what should I do for my old magick to purr again?

    I have absolutely no idea about your imagemagick problem but it sounds like either you didn't install it properly or didn't modify your PATH variable.
    searching for invisible files via time machine interface does not work (it's a known bug) but if you know exactly which file it is you can make invisible files visible in Finder using the following terminal command
    defaults write com.apple.finder AppleShowAllFiles TRUE; killall Finder
    then open the TM drive in Finder (not using Time machine) and restore your .bashrc file. also keep in mind that ~/.bashrc is only executed when you start bash as a nonlogin shell. so if you simply open a terminal window then ~/.bashrc is NOT executed. you might also want to modify ~/.bash_profile. Consult man bash for which files bash loads in which situations.
    P.S. to hide invisible files from Finder run
    defaults write com.apple.finder AppleShowAllFiles FALSE; killall Finder

Maybe you are looking for