Invisible Shield + Colour Screen- Does Anyone Have a Blurred Picture
I was looking to buy an invisible shield for my ipod video and noticed that in my local online store there was a note that said:
"due to a problem with the included screen protector blurring the the screen on colour iPod's and iPod Photo's we do not recommend purchasing the Podshield for use with any iPod's with a colour screen"
Does anyone have this problem or a way to get passed it? The Shield sounds great so I would really like to know any way I can get passed this.
Thanx
Ipod Video (30gb)
I bought an invisible shield by direct mail from the manufacturer in the USA and it arrived within 4-5 days. $25 sounds a lot for 2 bits of plastic but from what I've heard about how easy it is for Ipod to scratch up (I wouldn't know myself!), it is worth every penny. As long as you take your time to install it and follow the instructions properly, it provides superb protection and you can bearly notice it once its on. It is a FANTASTIC product and I would recommend it to anyone. In fact, it's the finish that Apple should have had on the Ipod from the start !
Video Ipod White 60gb
Similar Messages
-
MBP stuck on black screen, does anyone have any suggestions?
I have a MBP (MD311LL). it was functioning perfectly fine, when one day I went to use it and I get a black screen when it should be starting up. I can see the back light it on (the apple on the lid it lit) and the fans run for a few seconds, but nothing else is happening. I've tried different key combinations for the various resets, but nothing. I wanted to determine whether it was my screen or something more severe so I've tried logging in when the lock screen should be appearing and even put a movie in the disc drive. It just ate my movie...
Try this:
1. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own"
2.Reset PRAM. http://support.apple.com/kb/PH4405
If this doesn't help contact Apple.
Best. -
I have a mac OS X and when I close it and reopen my screen opens and then shuts down for an instant and then reopens. Does anyone have this occur?? I have shutdown and restarted often.
A Safe Mode boot might help ..
Startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu.
See if the problem persists. -
I have a cracked screen, does anyone know the cost and time it take apple to repair?
I have a cracked screen, does anyone know the cost and time it take apple to repair?
I'd like to know too for my MacBook Pro Retina (Late 2013). Having spoken to some Apple Stores here in Sydney, I need to bring in the computer for them to tell me. I'll know more tomorrow.
-
I have put Netflix on my Macbook Pro but Silverlight will not run.I receive a black screen that says "player error." Does anyone have a solution for this. Netflix support is not so hot.I can use Netflix straming thru my Blueray on my TV but it will not run on my Pro. Thanks
Try running Safari in 32 bit mode. In get info box for Safari,
check open in 32 bit mode. There have been some oddities
on some systems that can cause some issues.
I had thought MS had fixed this, but may not have. -
Does anyone have an issue with your iPhone 5 when trying to play music? Mine won't, on the screen you see the player run through songs very quickly but never playing.... Help!
Try this > Start a song, tap the screen, under the left side of the scrubberbar that appears, tap the icon to stop shuffle.
-
Several days ago some of the links in my Apple Mail messages stopped working. Specifically, the links going to some variation of "response beacon" don't work. All I see is a blank screen. Does anyone have any idea how to fix this?
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?
Irelandbound wrote:
thank you, I have the adaptors so glad that would work. I just heard adaptors burn out often. So Just thought for my main iMac computer, a plug would be best. I will get one once I move.
Any other suggestions or things I should know about apple products in Ireland. I know there are no Apple stores there.
An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
If you have something that doesn't have that input power spec, it would require a transformer.
On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out. -
My video app that is preloaded on the IPAD will not open. all I can see is a blank screen. Does anyone have any suggestions on how I can fix it?
The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
*[[/questions/918127]]
*[[/questions/918028]] -
I have downloaded ios 7.2 update for my ipad and now my screen is locked and shows a picture of a plug and the itunes symbol. Does anyone have advice to fix this frustrating problem? I have seen help online for iphones, but none for ipads. The screen will not budge. I have tried holding down the power and home buttons at the same time, to no avail. Please, can some of you smart people help me?
Hi there Martha250,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
My ipad's screen has gone completely blank. I can't see anything. Have attempted to update and restore it, but to no avail. Does anyone have an idea on how to resolve this issue?
Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
My MacBook5,1 pro screen blinks during startup. Does anyone have any suggestions?
I bought my Mac in December 2008 and for the first time today, I see my computer screen blinking when I started up the computer. Does anyone have any recommendations?
When you say the only tool available was to restart... do you mean Disk Utility wasn't there?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
I also tried safe booting and holding down the options key..
Shift key invokes a "Safe Boot", the Option key should bring up the Boot Options screen where available boot drives are shown.
Do you have another Mac with Firewire around and does this one boot into FireWire target disk mode...
http://support.apple.com/kb/HT1661
If so this Mac will look like a big Firewire drive to the other one, and if the other one is the same OS or higher you can try Disk Utility on the other one to attempt repair of the iMac's drive. -
My iPad will not boot up. When I press the on/off button, nothing black screen. Does anyone have a suggestion?
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
hey guys, im in need of seriously help. i let a friend jailbreak my iphone and now its jus stuck at the apple screen. i tried rebooting it and everything but nothin is working. does anyone have any good advice?
put the phone in DFU mode (do a search for how to do this) and restore to the latest firmware. you may have to download the firmware from apple and when selecting restore or update in itunes press the shift key and select the firmware.
Hope this helps -
Hi, I noticed this morning that I can no longer access movies etc. from the the itunes store via my Apple TV generation 1 (silver box)
Does anyone have a solution to help me?
My ATV Gen 2 (black box) is fine.
need help.
regardsThere is a fault with iTunes and apple tv 1
See this thread
https://discussions.apple.com/thread/6099057?start=165&tstart=0
Report it to apple
Maybe you are looking for
-
I open the first pdf and can read it. If I open a second pdf, the second one does not appear.
Moving the cursor over the first pdf begins painting the second pdf in small blocks. I'm running XP with all the latest MS updates. I've also run the latest updates for Adobe Reader and checked the Adobe Add-ins are in IE 8.0. This same issue occu
-
How to Shift a field in Customer Creation Window to Main Page
Dear All, We have a requirement of entering Customer Class while creating Customer.(Version R 12.0.6) In Vision Instance, when we open Create Customer form, Customer Class appears under Account Information Part of Form, where we can select Customer C
-
SCCM 2012 R2 - Site is not active
Good day, Hope all is well. We currently have a CAS Server, after we upgraded to 2012 R2 replication does not work anymore. Can anyone assist me please. I get the following errors, also tried multiple fixes. Checking if initialization request is need
-
InDesign CS5 crashes when adding pages - is there an answer yet?
Having scouted around I can see lots of people have this (or a similar) problem, but with far more specific circumstances than mine - e.g. in templates, or with documents created in previous versions, or when adding more than 10 pages, etc. Mine is a
-
Iphone4s - because I use pass lock I cannot decline a call such as a blocked number. If I can't see who is calling then I don't want to answer it. But due to having my phone on lock - i can see its a blocked number but there is no option to decline