Invisible Text in fields after highlights are deactivated

Completed fields in the sent adobe form are invisible.  I have deactivated the highlighted field as instructed but the completed fields stay invisible.  If I were to type a character in the field, the information in that field will stay visible.  As the forms have confidential information I cannot sent them for samplings.  Any suggestions?

Unless you can verify what caused the problem, I would go with the most common cause of this issue which is Apple's Preview program.
There have been a couple of scripts that can repair the form have been posted and are a free download.
One could also export the data to an FDF file and them import that exported data into a good copy of the form.

Similar Messages

  • Why can't I create a document in my Facebook group on my iPad? It won't let me input any text into the text box field after I create a new document. Thanks.

    Why can't I create a document in my Facebook group on my iPad. It won't let me input any text into the text box field after I create a new document. Thanks.

    Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
    I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
    The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
    I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

  • Receiving text mesages hours after they are sent to me

    I have started to receive some messages several hours after they have been sent! I have very good service but for example today at 5:10 p.m. I received a text sent to me this morning at 8:00 a.m.

    It probably is temporarly not connecting to the network whether it is WiFi or your Carriers network.
    You could be in a closed Room or Building and it could do this. Whether it is WiFi or Carrier
    Also if you took a trip into the country and returned to the city later u might all of a sudden get all your messages.
    because there are not as many cell towers away from the city.

  • Issue of Text input field  in Where Tab of Migo During POST

    Hi Friend's,
    I m facing some issue In MIGO for Test Input field not showing in WHERE tabe during Display-Material  on POST it will showing during check but when i try to post it it will invisible text input field what will be issue..high preiority..
    Regard's,
    shaikh.khalid.

    ok .
    when i go migo and select GR and Purches order.after enter in below WHERE tab there is a text and input field of that when filling this i try to check it showin text and input field during check but once i press POST button and then go to where tab it not showing Text and input field both are invisible..
    1.In MIGO During GR-purchase order in Where tab Text and it’s input field are showing during CHeck tabe
    2.On POST it not showing Text Input Field both are invisible.

  • I can't enter any value in the Text field, after loading flash files

    Hi to all,
    In my Java application, I'm using a text field and a panel to load flash files. I'm using JDIC 0.9.1 to load the flash files in the panel. The flash files are created by Flash CS4.
    While running the application, I can't enter any value in the Text field, after minimize and maximize the application I can enter the values.
    This problem happens after change the jre version from 1.6 to 1.7.
    I'm getting the following exception while running the application.
    org.jdesktop.jdic.init.JdicInitException: java.io.IOException: The filename, directory name, or volume label syntax is incorrect
    at org.jdesktop.jdic.init.JdicManager.initBrowserNati ve(Unknown Source)
    at org.jdesktop.jdic.browser.WebBrowser.<clinit>(Unkn own Source)
    pls give me a solution.
    Thanks in advance...:)

    I can't enter any values in JTextField after loading the flash files., locking.

  • Clearing text field after query

    I have seen alot of old post on this but no answers, I am wondering if anyone knows how to accomplish clearing a text field after a query has been executed?
    Example:
    User types a query in the search field, clicks submit then the query is returned and the search field is empty again ready for the next query.

    I tried that and I was getting "(null)" in the value of the column I queried.
    This is what I came up with and it seems to be working. In the Page Definition click Edit Attributes and add this line to the On Load section:
    onload="html_GetElement('PX_SEARCH').value=''; html_GetElement('PX_SEARCH').focus()"That will clear the field and focus the cursor in the same field so its ready for another query.

  • How can I highlight areas of text that I've downloaded?

    This has just got to be easy . . . am I missing something obvious?
    If I've downloaded a document from the internet for my own reference, and I want to highlight areas of text, how can I do that without buying an app>
    MacBook Air
    Version 10.8.2
    Safari
    Version 6.0.1

    A .pdf document.
    Let me give you an example . . . an article that I'd like to share with a family member and call attention to (highlight) a few words of the text.
    Message was edited by: ApostrapheS

  • Autodetect text form fields-How do you get it to find all field areas?

    I have 50 pages, all identical.  I created in InDesign and its simply just a chart that is about 50 lines with 4 columns.  It was created as a table also and very clean.  I want each of those cells to be converted to text form fields in Acrobat.  When I run the auto detect, it finds every one except the column on the far right and one of the cells on the very bottom with all 50 pages.  I really need this to autodetect these or else I will have to do all those missing ones manually and that is a TON I will have to do and give unique names also which I really dont want to do!  I have attached a screenshot of the form as is and another showing all the detected fields.

    I don't think that there is a way to do, I think your only option is to add manually. If that column is the same size as last one on the right that it detected then you can copy>paste. But beware you may have to rename the field and double check your tabbing order when doing so.
    If all your 50 pages have the exact same fields then get your 1st page setup. Then create page 2 and open your pdf with the correct fields, go to Document>Replaces Pages, and select page 2, so the same for all pages and then combine all pages into 1 pdf when finished (seems like a lot of steps but in my opinion faster then doing 50+ pages and however many fields). As long as your 1st page is the exact same field setup as all the rest this should prevent you from having to redo all 50 pages.

  • Text List Highlights Area of an Image

    Hi All,
    I have an image of a printed circuit board with many components.  I would like to help people find those components by having a text list to the right of the image, then if you click or hover over the text, the component is highlighted in the circuit board image.
    Another way of looking at it:  I have a map of the United States with an alphabetic list of states to the right.  When you click or hover on a states name, the state is highlighted on the image. 
    What is important to note is that I'm not hovering over the image.  I'm string help people locate something on the image by having an alphabetical list that will highlight something on an image so they can find it.
    How would I do this?  What CS6 product do I even start with.  I assume dreamweaver?  Can I do this with a CSS rather than JS?
    Thanks!
    Mike

    This image is basically this except with a few more components (about 100).
    http://www.hairballaudio.com/blog/wp-content/uploads/2014/07/Elements_PCB.jpg
    I actually found exactly what I want to do here:
    Demonstration of boundList feature - JSFiddle
    Seems like I can create the image map in Dreamwever then control and make a list with the script.
    Mike

  • Invisible text in acrobat forms

    For a number of years and a number of different versions of Acrobat we have noted that a form filled out across platforms may not show the filled in text unless it is highlighted.  I've searched Google and the Adobe site and found a number of discussions on this and some "fixes". 
    We've been dealing with this for a number of years and have noted that the issue is with the default text color, black.  If you actually chose any other color (we usually use dark blue) when creating the fields the text will appear on all platforms and almost all viewers.  You can also "fix" filled out forms that have the invisible ink issue by using the advanced editing tools to highlight a field and then select all and then adjust properties to change the text color to anything but black (or white).
    We have noted a correlation in the issue seeming to be when the form was created on one platform and then filled out on the other, aka Mac created but Windows filled out or vice versa. Ocassionally it will show up within a family (aka Windows) but where the base OS (XP vrs 7) or version of Acrobat (7 vrs X) is different from the one that originated the form.
    Is there some other global setting that needs to be or possible can be adjusted to fix this?

    Invisible text in Flash enabled web pages is a frustrating problem that is affecting Mac Users who play Farm Town (8.5+ million people on FaceBook) and probably many other games too.  See this forum as an example of the problem:  http://slashkey.com/forum/showthread.php?p=2531318
    Before even reading this forum I did everything that appears here with no success and then everything listed in the referenced forum (above) with no success... but the following did fix the invisible text problem and I hope that it will help others too.
    1.  Drag the Font folder from the User directory to the trash  ie. ~/Library/Fonts.  (where ~ is = your User Account Name.)
         Be careful; this is NOT the Font folder in the main library.
    2. Download Font Finagler v1.5 beta for Mac OS 6, and clean the font cashe files following the instructions for this free shareware app.
            http://homepage.mac.com/mdouma46/fontfinagler/
    3. Open the Font Book app which is a new app that is included with the Mac OS Snow Leopard (10.6). (Font Book is in the Applications folder.) Read the Help info for this app and then: Choose "All Fonts" in the left column and then choose "Select Duplicate Fonts" from the Edit menu. Disable or delete all duplicate fonts that this process identifies. After dealing with the duplicate fonts, select "All Fonts" again in the left column and choose "Validate Fonts" from the File Menu.  Deal with the results that it will display using the help file for guidance.  Interestingly, in my case there were no corrupt fonts in my Mac system, but the validation process identified more duplicate fonts that the previous step did not find. Again deal with the findings and disable or delete the duplicate fonts.
    4. Reboot your Mac and get on with using your Flash enabled web pages.  Duplicate fonts seems to be the problem that cause invisible text in Flash enabled web pages.
    Hope this helps you... it worked for me.
    Clark

  • Set maximum size in Text Form Field Options for a field in bi publisher RTF

    Hi All,
    How to set maximum size in Text Form Field Options for a field in bi publisher RTF.
    I have a RTF whch is having a field in that i need to add some validation condition but after adding certain condition in Add help text tab ,it is not accepting after certain length, how i can increase the length to unlimited,please help me on this
    Thnaks

    Form fields have some restrictions if your are using version lower than 11g.
    They can accommodate only 393 chars. You can add the text in both status bar and help key, which can in total consume 393 chars.
    If your code logic is more than that, it can be split into multiple form fields as Avinash suggested or you can use sub template logic and handle coding over there. Again in sub template code can be within/outside form fields.
    So there is no option for user to increase the size of form field.

  • Text Input field return char problem

    I have a multiline text input field used as a message area on a form (sending mail through a PHP doc).  When I hit return to start new paragraph in that field and the form content is send and received at other end everything after that return is lost?  Any ideas would be fantastic...
    Marc

    copy the code between the dotted lines and attach it to the same timeline that contains your submit button:
    var sendLV:LoadVars=new LoadVars();
    var receiveLV:LoadVars=new LoadVars();
    receiveLV.onData=function(src){
    trace("received");
    trace(src);  // or use a textfield to see the return if you're not able to see trace output when testing
    // and you should attach code to objects.  assign an instance name to your submit button (say submitBtn) and use:
    submitBtn.onRelease=function(){
    sendLV.name = form.nameTF.text;  // assign properties to sendLV that your php is expecting.  assign values to those properties using the form data
    sendLV.email=...
    sendLV.message=...
    sendLV.sendAndLoad("email.php",receiveLV,"POST");
    trace("sent\n"+sendLV.message)
    and change your email.php file to:
    <?php
    echo $_POST['message'];
    ?>

  • SOME FIELDS OF WORK AREA ARE CONVERTED TO ***** AT AT NEW STATEMENT

    HELLO
    SOME OF THE FIELDS OF WORK AREA ARE CONVERTED INTO *********** AT AT NEW STATEMENT .FIND BELOW THE CODE
    *& Report  YTEST_OBJECTS7
    REPORT  YTEST_OBJECTS7.
    Program Description
    Author.........: Jitendra Dash                                       *
    Creation date..: 17/09/2010                                                    *
    GAP ID/FS Id...:                                                     *
    Transport......:                                                     *
    Description u2026..:                                                     *
    CHANGE HISTORY u2013 Should be completed in reverse date order           *
    Revised by........: <Developer name>                                 *
    Change date.......: Date of creation>                                *
    CR/Defect No......:  <Change Request No>/ <Defect#<xxx>              *
    Transport.........: <Request No>                                     *
    Description.......: Description about modification                   *
    Data Declaration
    TYPES: BEGIN OF gx_input,
             NEMI      TYPE EXT_UI,
             DIVISION  TYPE SPARTE ,
             DATE      TYPE ERDAT,
             DATE1     TYPE ERDAT,
           END OF gx_input.
    TYPES: BEGIN OF gx_input1,
             NEMI      TYPE EXT_UI,
             DIVISION  TYPE SPARTE ,
             DATE      TYPE ERDAT,
             DATE1     TYPE ERDAT,
             int_ui    TYPE INT_UI,
             ANlage    type   anlage,
             SERVICE   TYPE SERCODE,
             SERVICEID TYPE SERVICE_PROV,
             SPARTE    TYPE SPARTE,
            END OF gx_input1.
    TYPES : BEGIN OF gx_euitrans,
            INT_UI TYPE INT_UI,
            EXT_UI type EXT_UI,
            END OF gx_euitrans.
    TYPES : BEGIN OF gx_eservice,
            INT_UI TYPE INT_UI,
            SERVICE TYPE SERCODE,
            SERVICEID TYPE SERVICE_PROV,
            SPARTE    TYPE SPARTE,
            END OF gx_eservice.
    TYPES : BEGIN OF gx_inst,
            int_ui TYPE INT_UI,
            ANlage type   anlage,
            END OF gx_inst.
    TYPES : BEGIN OF gx_ever,
            ANLAGE TYPE anlage,
            EINZDAT TYPE EINZDAT,
            AUSZDAT TYPE AUSZDAT,
            VERTRAG type VERTRAG,
            vkonto TYPE VKONT_KK,
            END OF gx_ever .
    TYPES : BEGIN OF gx_fkkvkp,
            VKONT type VKONT_KK,
            GPART type GPART_KK,
            END OF gx_fkkvkp.
    DATA : GIT_INPUT TYPE STANDARD TABLE OF GX_INPUT,
           git_euitrans TYPE STANDARD TABLE OF gx_euitrans,
           git_eservice TYPE STANDARD TABLE OF gx_eservice,
           git_inst TYPE STANDARD TABLE OF gx_inst,
           git_ever TYPE STANDARD TABLE OF  gx_ever,
           GIT_INPUT1 TYPE STANDARD TABLE OF GX_INPUT1,
           GIT_fkkvkp TYPE STANDARD TABLE OF GX_fkkvkp,
           WA_INPUT TYPE gx_input,
           wa_euitrans LIKE LINE OF git_euitrans,
           wa_eservice like LINE OF git_eservice,
           WA_inst LIKE LINE OF git_inst,
           wa_ever LIKE LINE OF git_ever,
           wa_INPUT1 like LINE OF git_INPUT1,
           wa_fkkvkp like LINE OF GIT_fkkvkp.
    DATA: gv_v_localfile TYPE localfile,
          gv_g_localfile type string,
          gv_g_alocalfile type string,
          gv_g_sender type SERVICE_PROV,
          gv_g_reciever type SERVICE_PROV.
    CONSTANTS : GC_AINP TYPE c LENGTH 50 VALUE '/tmp'.
    ************Selection screen for input *********************
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE t1.
    PARAMETERS : p_rad1 RADIOBUTTON GROUP grp DEFAULT 'X' USER-COMMAND chk,
                 p_rad2 RADIOBUTTON GROUP grp,
                 p_file TYPE file_table-filename MODIF ID m1,
                 p_afile TYPE file_table-filename MODIF ID m2.
    SELECTION-SCREEN END OF BLOCK b1.
    ***************Initialization*****************************
    INITIALIZATION.
      t1 = text-001.
    ***Selection of Appl ser and Presen ser for I/P file******
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        IF p_rad1 = 'X'.
          IF screen-group1 = 'M2'.
            screen-active = 0.
            MODIFY SCREEN.
          ENDIF.
        ELSEIF p_rad2 = 'X'.
          IF screen-group1 = 'M1'.
            screen-active = 0.
            MODIFY SCREEN.
          ENDIF.
        ENDIF.
      ENDLOOP.
    **F4 help for inputting the Filename from presentation Ser*
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
        EXPORTING
          program_name  = sy-repid
          dynpro_number = sy-dynnr
          field_name    = p_file
        CHANGING
          file_name     = gv_v_localfile
        EXCEPTIONS
          mask_too_long = 1
          OTHERS        = 2.
      IF sy-subrc = 0.
        MOVE gv_v_localfile TO p_file.
        move gv_v_localfile to gv_g_localfile.
      ENDIF.
    ***F4 help for file on Application Server*******************
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_afile.
      CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
        EXPORTING
          directory        = GC_AINP
          filemask         = ' '
        IMPORTING
          serverfile       = p_afile
        EXCEPTIONS
          canceled_by_user = 1
          OTHERS           = 2.
      IF sy-subrc = 0.
        move p_afile to gv_g_alocalfile.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    START-OF-SELECTION.
      IF p_rad1 = 'X'.
    *************Upload file into Itab from pres server*********
        CALL FUNCTION 'GUI_UPLOAD'
           EXPORTING
             FILENAME                      = gv_g_localfile
      FILETYPE                      = 'ASC'
            HAS_FIELD_SEPARATOR           = '|'
      HEADER_LENGTH                 = 0
      READ_BY_LINE                  = 'X'
      DAT_MODE                      = ' '
      CODEPAGE                      = ' '
      IGNORE_CERR                   = ABAP_TRUE
      REPLACEMENT                   = '#'
      CHECK_BOM                     = ' '
      VIRUS_SCAN_PROFILE            =
      NO_AUTH_CHECK                 = ' '
    IMPORTING
      FILELENGTH                    =
      HEADER                        =
           TABLES
             DATA_TAB                      = GIT_INPUT
        EXCEPTIONS
          FILE_OPEN_ERROR               = 1
          FILE_READ_ERROR               = 2
          NO_BATCH                      = 3
          GUI_REFUSE_FILETRANSFER       = 4
          INVALID_TYPE                  = 5
          NO_AUTHORITY                  = 6
          UNKNOWN_ERROR                 = 7
          BAD_DATA_FORMAT               = 8
          HEADER_NOT_ALLOWED            = 9
          SEPARATOR_NOT_ALLOWED         = 10
          HEADER_TOO_LONG               = 11
          UNKNOWN_DP_ERROR              = 12
          ACCESS_DENIED                 = 13
          DP_OUT_OF_MEMORY              = 14
          DISK_FULL                     = 15
          DP_TIMEOUT                    = 16
          OTHERS                        = 17
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ELSEIF p_rad2 = 'X'.
    *************Upload file into Itab from Applic server*********
    ************file should be ; seperated and not tab seper******
       TRANSLATE gv_g_alocalfile USING '\/'.
       OPEN DATASET gv_g_alocalfile FOR INPUT MESSAGE gv_LC_MESSAGE in TEXT MODE ENCODING DEFAULT.
       IF sy-subrc = 0.
         DO.
           READ DATASET gv_g_alocalfile INTO wa_xls.
           IF sy-subrc IS NOT INITIAL.
             EXIT.
           ELSE.
             APPEND wa_xls TO git_xls.
           ENDIF.
         ENDDO.
       ENDIF.
       close DATASET gv_g_alocalfile.
      ENDIF.
      SELECT INT_UI EXT_UI from EUITRANS
                           into CORRESPONDING FIELDS OF TABLE git_euitrans
                           for ALL ENTRIES IN  GIT_INPUT
                           WHERE ext_ui = GIT_INPUT-NEMI.
      SElect INT_UI
             SERVICE
             SERVICEID
             SPARTE    from ESERVICE
                       into CORRESPONDING FIELDS OF TABLE git_eservice
                       FOR ALL ENTRIES IN git_euitrans
                       where INT_UI = git_euitrans-INT_UI .
      SELECT INT_UI
             ANLAGE from euiinstln
                    into CORRESPONDING FIELDS OF TABLE GIT_INST
                    FOR ALL ENTRIES IN  git_eservice
                    WHERE INT_UI = git_eservice-INT_UI.
      LOOP AT git_eservice into wa_eservice.
        READ TABLE git_euitrans into wa_euitrans
                                with KEY int_ui = wa_eservice-int_ui.
        IF SY-SUBRC = 0.
          READ TABLE git_input into wa_input
                               WITH key NEMI = wa_euitrans-EXT_UI.
          IF SY-SUBRC = 0.
            READ TABLE  GIT_INST into WA_INST
                                     with key int_ui = wa_eservice-int_ui.
             IF Sy-subrc = 0.
                  wa_input1-NEMI = wa_input-NEMI      .
                  wa_input1-DIVISION = wa_input-DIVISION.
                  wa_input1-DATE = wa_input-DATE.
                  wa_input1-DATE1 = wa_input-DATE1.
                  wa_input1-int_ui = wa_eservice-int_ui.
                  wa_input1-anlage = WA_INST-anlage.
                  wa_input1-SERVICE = wa_eservice-service.
                  wa_input1-SERVICEID = wa_eservice-serviceid.
                  wa_input1-SPARTE  = wa_eservice-sparte.
            Append wa_input1 to git_input1.
             ENDIF.
          ENDIF.
        ENDIF.
        clear : wa_eservice,wa_input,WA_INST,wa_euitrans,wa_input1 .
      ENDLOOP.
      SELECT anlage
             EINZDAT
             AUSZDAT
             VERTRAG
             VKONTO  from ever
                     into CORRESPONDING FIELDS OF TABLE git_ever
                     FOR ALL ENTRIES IN git_input1
                     WHERE anlage = git_input1-ANLAGE
                       and EINZDAT = git_input1-DATE
                       or  AUSZDAT = git_input1-DATE1.
      Select Vkont Gpart from fkkvkp
                         into CORRESPONDING FIELDS OF TABLE git_fkkvkp
                         for ALL ENTRIES IN git_ever
                         where  Vkont = git_ever-Vkonto.
    LOOP AT  git_input1 INTO wa_input1 .
    IF wa_input1-SPARTE = 01  .
    CASE wa_input1-SERVICE.
      WHEN 'FRMP'.
        gv_g_sender = wa_input1-SERVICEID.
      WHEN 'LNSP'.
        gv_g_reciever = wa_input1-SERVICEID.
    ENDCASE.
    ELSEIF wa_input1-SPARTE = 02 .
    CASE wa_input1-SERVICE.
      WHEN 'FRO'.
        gv_g_sender = wa_input1-SERVICEID.
      WHEN 'DB'.
        gv_g_reciever = wa_input1-SERVICEID.
    ENDCASE.
    ENDIF.
    data : int_ui TYPE INT_UI.
    *int_ui = wa_input1-int_ui .
    AT NEW int_ui .
    READ TABLE git_ever into wa_ever with key  anlage = wa_input1-anlage.
    READ TABLE git_fkkvkp INTO wa_fkkvkp with key Vkont = wa_ever-Vkonto.
    CALL FUNCTION 'ZIN_COMEV_CUSTDETAILNOTIF_OUT'
      EXPORTING
        Y_SENDER              = gv_g_sender
        Y_RECEIVER            = gv_g_reciever
        Y_PARTNER             = wa_fkkvkp-gpart
        Y_BASIC_PROCESS       = 'ZCDNO'
      Y_SWITCHNUM           =
      Y_SEN_LOAD            =
        Y_INTUI               = wa_input1-int_ui
      Y_TRANSACTIONID       =
        Y_DATE                = wa_input1-DATE
    IMPORTING
      X_TASK_ID             =
    TABLES
       IDOC_STATUS           =
       IDOC_CONTRL           =
       XYT_ERROR             =
    EXCEPTIONS
      GENERAL_FAULT         = 1
      NOT_FOUND             = 2
      OTHERS                = 3
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDAT.
    ENDLOOP.
    IN THIS PROGRAM AT AT NEW STATEMENT IN LOOP SOME OF THE FIELDS OF wa_input1 IS CONVERTED TO ***** E.G  wa_input1-anlage.
    pLEASE HELP ME OUT

    HELLO
    My Q is some fields at AT NEW statement turns into *****.Please help me out
    TYPES: BEGIN OF gx_input1,
             NEMI      TYPE EXT_UI,
             DIVISION  TYPE SPARTE ,
             DATE      TYPE ERDAT,
             DATE1     TYPE ERDAT,
             int_ui    TYPE INT_UI,
             ANlage    type   anlage,
             SERVICE   TYPE SERCODE,
             SERVICEID TYPE SERVICE_PROV,
             SPARTE    TYPE SPARTE,
            END OF gx_input1.
    GIT_INPUT1 TYPE  gx_input1.
    LOOP AT  git_input1 INTO wa_input1 .
    AT NEW int_ui .----
    >hERE FIELDS OF wa_input1 ARE TURNED INTO *                                                                               
    EX: wa_input1-ANLAGE =******** AFTER AT IN COMMAND.
    END AT
    eNDLOOP

  • Invisible Text in Flash Player Using Windows XP

    I seem to have a problem with the Flash Player and invisible text. The Flash Player will load but there will be some buttons that are not labeled with text, so you don’t know what the buttons are, fill-in text boxes that have no text or text description, so you don’t know what to type in them, and drop-down lists that are blank, but there is supposed to be text to select from.
    I tried uninstalling and reinstalling FireFox, that did nothing; unistalled the Shockwave Flash Plug-in and reinstalled it, that did nothing; unistalled Flash and Shockwave standalone Players entirely, leaving only the Plug-in, nothing; uninstalled and reinstalled Flash Player standalone, nothing there either. I cannot seem to find a solution and every browser I have, the same problem occurs – invisible text.
    I was reading on the Adobe Forum that there is this same issue sometimes with Mac and that the problem seems to be font incompatibility.
    This happens with any browser I use – Firefox, Flock, PaleMoon, IE, Opera, Netscape.
    My OS is Windows XP Home Edition
    Main browser is FireFox version 3.6.17
    Shockwave Flash Plug-in version is 10.3.183.7
    I also have the Shockwave Player standalone version 11.6.1.629
    Has anyone, using Windows, had this same problem? Is there any solution?
    Thanks for any advice.

    Invisible text in Flash enabled web pages is a frustrating problem that is affecting Mac Users who play Farm Town (8.5+ million people on FaceBook) and probably many other games too.  See this forum as an example of the problem:  http://slashkey.com/forum/showthread.php?p=2531318
    Before even reading this forum I did everything that appears here with no success and then everything listed in the referenced forum (above) with no success... but the following did fix the invisible text problem and I hope that it will help others too.
    1.  Drag the Font folder from the User directory to the trash  ie. ~/Library/Fonts.  (where ~ is = your User Account Name.)
         Be careful; this is NOT the Font folder in the main library.
    2. Download Font Finagler v1.5 beta for Mac OS 6, and clean the font cashe files following the instructions for this free shareware app.
            http://homepage.mac.com/mdouma46/fontfinagler/
    3. Open the Font Book app which is a new app that is included with the Mac OS Snow Leopard (10.6). (Font Book is in the Applications folder.) Read the Help info for this app and then: Choose "All Fonts" in the left column and then choose "Select Duplicate Fonts" from the Edit menu. Disable or delete all duplicate fonts that this process identifies. After dealing with the duplicate fonts, select "All Fonts" again in the left column and choose "Validate Fonts" from the File Menu.  Deal with the results that it will display using the help file for guidance.  Interestingly, in my case there were no corrupt fonts in my Mac system, but the validation process identified more duplicate fonts that the previous step did not find. Again deal with the findings and disable or delete the duplicate fonts.
    4. Reboot your Mac and get on with using your Flash enabled web pages.  Duplicate fonts seems to be the problem that cause invisible text in Flash enabled web pages.
    Hope this helps you... it worked for me.
    Clark

  • Copy and Paste from Safari to MS Word Text Form Field adds a trailing space

    I know this is just a minor issue, but an inconvenience for me nonetheless.
    When I go to the same page and copy and paste the same text from Firefox, the trailing space is not added.
    What I find puzzling is that when I paste the same copied text into notepad from Safari, it does not add the trailing space.
    So it is likely an issue with MS Word's method of pasting text, but strange to me that it does not happen from Firefox.
    Is there a way to inspect the exact contents of the clipboard to see if there are any differences?
    I just did a little bit more testing, and found that Word only adds an trailing space when I paste into a "Text Form Field" from only Safari.
    Maybe the solution is to stop using MS Word. (Ha, Ha)

    OK, I think I found another way to describe my issue:
    When I copy text from a webpage in Safari, some form of "meta-information", or formatting data, is kept, and when I paste into MS Word, the formatting from the webpage is retained. In my default setup of Firefox, this formatting meta-information is not retained, it only copies the plain-text.
    So my question is actualy: How do I prevent Safari from retaining formatting data, and only copy the plain-text?
    I have been testing some clipboard managers, and have yet to find one that will auto-filter out formatting data from text that I copy, but they can after interaction.
    The other, current, method I have been using is to:
    1. select and copy the text in Safari
    2. paste text into notepad
    3. select and copy text from notepad
    4. paste de-formatted text into MS Word
    Or in Firefox:
    1. select and copy the text in Firefox
    2. paste text into MS Word (no formatting retained)

Maybe you are looking for