InvisibleSHIELD wetting agent?

Having read the first Rainy Day Magazine review of the Invisible Shield screen protector, I ordered one (knowing about the click wheel cutout) for my shiny black 60GB. Now, after reading numerous threads about these protectors I discovered another review by the same people of the iPod nano version with cutout click wheel.
While the first review used soapy water to activate the glue, the second referred to some "mystery wetting agent" that came with the protector.
Considering so many of you have happily bought and applied these protectors successfully, did anyone get this bottle of wetting agent with theirs? If so, can you comment on its effectiveness? If not, how easy did you find the soap solution? Was it easy to get dirt/dust on the sticky side when handling it?

I have the invisible Sheild for my ipod 5G 30GB. It does not come with the Mystery Wetting Agent that it talks about in that article. All it comes with is the two covers. Using the soapy water solution is not difficult at all and dirt/other stuff does not get stuck on the sticky side miraculosly. As soon as you peel the cover off the paper, you dip it in the soapy mixture. Then stuff really does not get stuck on it.
Just make sure you wash your hands really good, and it takes a few tries to put it on, but this is a great protector!
Good Luck
(If I was helpful, please press + on my post)

Similar Messages

InvisibleShield - Clickwheel Cut out install...

Some readers pointed out that while the InvisibleShield provided full body protection for the iPod nano, it also obscured the aesthetics of the matte clickwheel.
The makers of the InvisibleShield responded quickly and released a version of the iPod nano cover with precise cutouts of the clickwheel.
They have also addressed the issue of "what wetting agent" to use when applying the InvisibleShield by including a vial of liquid that made the entire process quick and painless.
We completed the entire installation process in one attempt in less than 10 minutes
http://www.rainydaymagazine.com/RDM2005/GearNGadgets/October2005/RDMGG_Invisible ShieldCutOut.htm

Because of the cut out, this version was much easier to deform... so keep that in mind when working out any bubbles.
Also... we cannot stress enough about making sure the fingers are clean. The sticky stuff will take whatever is on your fingertips and immortalize it on the shield
Good luck!

Problem with Nokia E 7 Headphone

Hi all,
My headphone is not detecting on my mobile. When I'm inserting it on headphone jack its showing TV symbol rather than headphone symbol. Because of that I can't use radio also.
I tried to restore the factory settings by dialing *#7780# and also try to format the device by dialing *#7370#, but still it didn't resolve the issue.
Whether I've do something with the setting on my mobile or is it problem with my mobile or headset?
Can someone help me to resolve this issue?

@Vishaldevasia
If you have a small non-metallic pin or thin stick like a tooth pick/matchstick dipped in alcohol as wetting agent, have you tried cleaning out the headphone jack? Sometimes dust and other fibres can get in which can affect the functionality. You would need to check using another handset before pointing to issue being hardware related.
Happy to have helped forum with a Support Ratio = 42.5

Installing OEM agent 10.2.0.4 - pre-req fails: locale

Friends,
We are attempting to install an OEM agent 10.2.0.4 on AIX 5.1.
Just when we get to about 90% complete, we get an error regarding 'locale'.
WHen I checked the log file for the InstallActions, I find hundreds of errors related to:
INFO: ld: 0711-251 SEVERE ERROR: Symbol table entry 17 in object /oracle/product/agent10g/lib/libpls10.a[ociextp.o]:
Field n_offset contains -1726349312. Valid values are between 4 and 381.
ld: 0711-251 SEVERE ERROR: Symbol table entry 17 in object /oracle/product/agent10g/lib/libpls10.a[ociextp.o]:
Field n_offset contains -1726349312. Valid values are between 4 and 381.
Then, at the end of the log, I see:
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'itnsping nnfgt.o mkldflags client_sharedlib' of makefile '/oracle/product/agent10g/
network/lib/ins_net_client.mk'. See '/home/oracle/oraInventory/logs/installActions2009-04-14_01-41-51PM.log' for details.
Exception Severity: 1
Any ideas where I should start looking?
Thanks...

Thanks Srini,
You found our problem.
I checked our AIX filesystem, and it seems someone had configured the /oracle mount point which contains the Oracle executable binaries and library files to use the 'cio' (concurrent i/o) option.
Thank you for pointing this out. I'm actually new to AIX, although many years on other operating systems.
I'm also new to this company and just getting my feet wet here with AIX and their existing configurations.
I'm going to write a memo advising our sys admins not to use cio mount option on any mount points except for those containing only the oracle data files.
Thanks again.
Ji Li

Agent 18 Protective Case

I just recently purchased an Agent 18 case to protect my iPod. When I put the case on it was really snug around the iPod so much that you could see blemishes on the screen because the plastic was pushed up against it. Is this too tight for my iPod? I don't want to damage the screen and body in any way, that is why I got the case! Should this be happening? The best way I can describe what is happened is if you ever touched a calculator screen with your finger and press in it results in blemishes on the screen.
Also, what is a nice good clear hard case to protect the ipod?

I had installed the Invisibleshield first and found the same problem when used with the agent 18.
I remove the back portion of the Invisibleshield and all is well.
Don't know if you have shield installed but just a thought

Installing InvisibleShield. GREAT tip inside!

I got this tip from a "InvisibleShield knock-off" website but it works and make a lot of sense for the installation.
The best place to install the InvisibleShield is in a clean bathroom. Before installation, make sure to let the hot water run in the bathtub for a little while. The steam created will "clean" the air making dust particles wet and heavy so they fall to the ground and consenquently you'll have a dust free installation. It worked for me!
P.S. There's no need to leave the hot water running during the process. A little steam is sufficient to clean the air up for a while.

I updated Adobe Application Manager. After the update and upon attempting to install Acrobat Pro from AAM, I get a message stating, "The download appears corrupted. Press Cancel, wait a few minutes and try again. (-60)" This is the same message I receive whenever I attempt to install anything from AAM. However, now I see a deactivate option in Acrobat Pro even though AAM does not indicate that it is installed. Furthermore, I'm not getting a popup telling me to license the software or continue with the trial. When I was getting the popup yesterday, I would enter my Create Cloud serial number in the serial number field, but it wouldn't accept it. The Adobe Create Cloud is the only number I've recieved in relation to Acrobat Pro X.
So, the short story is that I MAY now have a successful installation of Acrobat Pro. But if I do, I don't know why, and I couldn't replicate the process.

Custom clearing agent payment issue

Dear experts
Purchase order was created and the material was received on port (imports).
custom clearing agent has cleared the goods.
now custom clearing agent needs his charges.
the inv from vendor with reference to PO is not received.
any solution to settle the custom clearing agent payments.
till the inv. from vendor not received custom agent payment is is pending.
what should be done to resolve this issue.

Hi,
Copy one of your freight condition types and create a new condition type as custom clearing charges, please ensure that condition category is Delivery charges (B). In calculation schema enter this condition type at the appropriate position. Now when creating the PO, enter this condition type put the value, then select this condition type and go to details, here you will have a field to enter the vendor code, there key in the vendor code of custom clearing agent.
Now in MIRO enter PO no. and choose layout for Planned delivery cost, you can now enter the value for your agent and pay him.
Note: Please use this to pay only for service charge for the agent, for payment of custom duty you should use the condition type for custom duty and key in the vendor code for the customs clearing office there so that its easy to differentiate between custom duty and the service charges charged by clearing agent.
Regards
Chandra Shekhar

Follow up in IC Agent

HI experts,
I have a requirement where i need to create a follow up of business activity in IC agent ( BZ ROLE : UTIL_IC ). I have developed objects and even getting correct follow up transaction in pop up. When I select the follwo up from POP UP , it should open the view of transaction selected. But nothing is happening on selection.
Can anyone suggest.
Thank you.
Regards,
Vishal

Hi ,
I solved it myself.
Thank you.
Regards,
Vishal

Getting error while running Agent in obiee 11g

Hi,
We are using external table authentication in our application. We created 10 user in the table, when we are logging to the application we are able to log in.
After log in when we are creating Agent and click on run, it is showing error as [nQSError: 13024] Successful completion of init block 'security1' is required. (08004)
Security1 is our initialization block for authentication. But when I create one user in console and give admin priviledges to that user and try to run same agent, it is running fine.
Please let me know if I miss something or anything else need to configure.
Thanks
Anirban

Hope you have strictly followed the steps mentioned in the document:
http://docs.oracle.com/cd/E21764_01/bi.1111/e10543/legacy.htm#BABGEHJJ
Specifically note : Oracle BI Scheduler Server runs Delivers jobs for users without accessing or storing their passwords. Using a process called impersonation, Oracle BI Scheduler uses one user name and password with Oracle Business Intelligence administrative privileges that can act on behalf of other users. Oracle BI Scheduler initiates an Agent by logging on to Oracle BI Presentation Services with the Oracle Business Intelligence administrative name and password.
For Delivers to work, all database authentication must be performed in only one connection pool, and that connection pool can only be selected in an initialization block for the USER system session variable. This is typically called the Authentication Initialization Block. When impersonation is used, this initialization block is skipped. All other initialization blocks must use connection pools that do not use database authentication.
Hope this helps.
Thanks and regards,
Debarati.

Error While executing a SSIS package which contains a script task through SQL Server Agent job

Hi,
I have a SQL Server 2012 SSIS package with a script task along with other tasks [data flow, execute sql tasks ]. When I manually executed the job through BIDS, its completed successfully.
Then I have automated the execution of the package through SQL Server Agent Job. But when I executed the package through SQL Agent job, it runs successfully for all the tasks except script task. When it comes to execute the Script Task, it is getting failed
with the below error message.
"Error: 2012-08-29 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
I have installed the SSIS on the 64-bit environment and SSIS service is running. Also I tried to run the job through 32 bit [job option] but I am getting the above error in all cases.
Any help will be greatly appreaciated !
Thanks,
Navin
- naveen.reddy

Hi Arthur,
My script task access the excel files in a network share, refresh them all and save them. When I execute the ETL manually or thru DTEXEC, it is executing successfully. I am facing the issue when I am executing thru SQL Agent Job only. Logging also showing
the same error.
"Error: 2012-08-23 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
- naveen.reddy

Error after creating a new item in 'Case Worker'-- 'Agent Dashboard'-- 'Task Details' screen

In 'Case Worker'-->'Agent Dashboard'--> 'Task Details' screen, I have created a item named 'YEARS' using 'Create Item' in 'Personalize Page' screen. It is not going to tasks page and giving error as "
oracle.apps.fnd.framework.OAException: No entities found, entityMaps not defined for attachment item (YEARS)." How can I remove this field now..

Please see the suggested solutions in the following docs.
Entity Maps Not Defined For Attachment Error When Selecting A Deliverable (Doc ID 358385.1)
Corrupt Personalization - No Entities Found Entitymaps Not Defined For Attachment Item (Doc ID 1085011.1)
R12:Supplier Page Unexpected Error: 'No Entities Found EntityMaps not Defined for Attachment Item' (Doc ID 1361320.1
Geography Hierarchy No Entities Found, EntityMaps Not Defined For Attachment Item (Doc ID 831088.1)
Depot Repair Bulk Receiving Error: "No entities found, entityMaps not defined for attachment item" (Doc ID 1357977.1)
Thanks,
Hussein

Dynamic Creation of Physical Data Server / Agent cache Refresh

Scenario:
I have a requirement to load data from xml source to oracle DB, and the xml source will change at run time,but the xsd of the xml would remain same ( so I don't have to change the Logical data Server, models, mappings, interfaces and scenarios - only the Physical Data Server will change at runtime).I have created all the ODI artifacts using ODI studio in my Work Repo and then I'm using odi sdk to create the physical dataserver for the changed xml data source and then invoking the agent programmatically.
Problem:
The data is being loaded from the xml source to oracle DB for the first time, but it is not working fine from the second time onwards. If I restart the agent, it is again working fine for one more time. on the first run, I think the agent maintains some sort of cache for the physical data server details and so when ever I change the data server, something is going wrong and that is leading to the following exception. So I want to know, if there is any mechanism to handle dynamic data servers or if there is any way of clearing the agent cache, if any.
Caused By: org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 41, in <module>
AttributeError: 'NoneType' object has no attribute 'createStatement'
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1596)
     at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$2.doAction(StartScenRequestProcessor.java:582)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)
     at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$StartScenTask.doExecute(StartScenRequestProcessor.java:1070)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$1.run(DefaultAgentTaskExecutor.java:50)
     at org.springframework.core.task.SyncTaskExecutor.execute(SyncTaskExecutor.java:50)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor.executeAgentTask(DefaultAgentTaskExecutor.java:41)
     at oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor.doExecuteAgentTask(TaskExecutorAgentRequestProcessor.java:93)
     at oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor.process(TaskExecutorAgentRequestProcessor.java:83)
     at oracle.odi.runtime.agent.support.DefaultRuntimeAgent.execute(DefaultRuntimeAgent.java:68)
     at oracle.odi.runtime.agent.servlet.AgentServlet.processRequest(AgentServlet.java:445)
     at oracle.odi.runtime.agent.servlet.AgentServlet.doPost(AgentServlet.java:394)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
     at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:503)
     at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:389)
     at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216)
     at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181)
     at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765)
     at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:417)
     at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152)
     at org.mortbay.jetty.Server.handle(Server.java:326)
     at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:534)
     at org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:879)
     at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:747)
     at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:218)
     at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404)
     at org.mortbay.jetty.bio.SocketConnector$Connection.run(SocketConnector.java:228)
     at org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:520)

Hi ,
If you want to load multiple files ( same structure) through one connection then in topology create M.XSD for M.XML file
Create three directories
RAW -- It will contain file with original name
PRO- Processing area where file will be moved one by one & renamed it as M.XML.
OUT- Once file data will be loaded into tables move the file M.XML from PRO to OUT.
Go to odiexperts to create loop,
Use odifilemove ( to move & rename/masking) to move A.XML from RAW to PRO & rename to M.XML
use ODIfilemove to move M.XML to OUT folder & then rename back to A.XML
Use variables to store file names & refresh
NoneType' object has no attribute 'createStatement' : It seems that structure of your file is different & your trying to load different files in same schema. If stucture is same then use Procedure "SYNCHRONIZE ALL" after every load...
Edited by: neeraj_singh on Feb 16, 2012 4:47 AM

Windows Easy Transfer (WET) Issues with External Hard Drive - "Can't read from the source file or disk"

I work for Office Depot, in the tech department. Basically, one of our associates was supposed to do a data backup, and re-install Windows 7, then transfer the files back. He used Windows Easy Transfer and compacted everything into a 163 GB file.
Now comes the hard part. When we try to put it back on his computer ((drag-and-drop to the desktop) which has been wiped back to factory settings using the recovery partition), it stops at 79.5 GB remaining (you know how it doesn't give you a % of completion,
it just shows how many GB are remaining) and then says "Can't read from the source file or disk" and gives you an option to try again, or cancel. It gets hung up on the same point each time.
Normally, this wouldn't be a huge issue, but the contents on the drive are his wife's architect blueprints and interior design stuff, along with wedding photos, etc, which are the only copies they have. On top of those, they have court documents and other
important files that we are unable to access now.
I wasn't involved with this transfer, so I'm trying to clean up the mess as best I can. I remembered that the customer's wife was Russian, and had some files typed with a Russian keyboard, so on and so forth. I wonder if that's the issue? If not, I really
have no idea how to manually extract things from a ".mig" file, or how to diagnose what area is potentially corrupted.
In light of this situation, we tried using "Recuva" to recover the files post-wipe, but everything was corrupted or unable to be opened, and it also extracted and recovered all of the "useless" photos, such as the skype logos, up and
down arrows for browsers, etc (it was 160,000+ photos).
Trying to avoid a potential lawsuit, unhappy customer, and costing the company lots of money to see if professionals can get into this external hard drive.
Other relevant information:
We used a Toshiba 500 GB (465 GB) external hard drive.
Customer's computer is an HP Pavilion P6000 Series (Model No. p6520y) running Windows 7 Home Premium 64-bit Service Pack 1.
Any other information that is needed can be provided, thanks in advance, and hopefully we can find a solution to this issue quickly!
-John

I think there's a lack of understanding somewhere.
"If you even can't start the process, please unplug it from your new PC. Then head back to your new computer and plug
the external drive back in to your new computer. "
Unplug from new, head back to new, plug it back in? That doesn't make much sense! Haha.
I knew what you meant though, somewhat. When I search through the drives after clicking yes (Has windows easy transfer
already saved your files blah blah blah) I click on the transfer file and it says "Windows Easy Transfer could not open the file".
Rather than drag-and-drop the file to the desktop, I now tried to double-click on the file itself while it was plugged
into the computer. It opened, and it started transferring until it was about 70% completed, and then an error popped up saying "WET can't open the easy transfer file, make sure your USB device is plugged in or check your internet connection".
I checked, and the USB hard drive's light wasn't on. Now, I unplug it and plug it back in, and the light comes back on,
so I click Retry, and it resets the bar back to nothing and says "Transfer time: 1 minute".
Rather than continue trying, I clicked "Cancel" instead of Retry, and it says "Your transfer did not complete successfully."
It says to click "view report" for more information, but there's no "view report button".
At the moment, I am scanning the External Drive for bad sectors using the check disk tool in properties. It's frozen
at "0 USN bytes processed".

Using Bitlocker Data Recovery Agent (DRA) on Surface Pro 3

We currently have the Data Recovery Agent (DRA) configured in our Bitlocker Policy for our Windows 7 Systems, and it works fine. In situations where the Recovery Key for the computer object was not backed up to AD correctly for whatever reason or the computer
object was deleted, our HelpDesk can connect the encrypted drive to another system, and then use the certificate for the DRA to unlock the drive.
I'm wondering if the BitLocker DRA Certificate unlock method will work for Surface Pro 3 devices, in the case that that their computer object and normal BitLocker recovery key is deleted or missing in AD for whatever reason. Seeing as how our helpdesk can't
easily remove the internal HD from a Surface Pro 3 (I think only MS can do this?), I'm wondering if this BitLocker recovery option is still an option for Surface Pro 3's and if it is not then if there is another recommended option for Surface Pro 3's and/or
other Windows 8.1 Tablets used in an enterprise environment.

noctlos wrote:
Using linux-3.18 and -3.19 kernels, with wayland/weston v. 1.7. In its own tty, i try to run weston, and I get the following stderr:
Could anyone help me to figure this out? Thanks.
Seems that the problem lies in libinput. Maybe you can report that upstream. I suggest you recompile libinput with debug info and do not strip the binaries to obtain better backtraces.
Edit:
I have also tried running `swc-launch -- velox`, and get the following error:
Running on /dev/tty2
velox: error while loading shared libraries: libinput.so.5: cannot open shared object file: No such file or directory
Server exited with status 127
Restoring VT to original state
So, perhaps I am having some libinput trouble. Does this seem correct?
Well, that's a different problem. libinput has several soname bumps because of API and ABI incompatibility. You have to rebuild swc against the newest libinput. (Although I'm not sure if swc developer updated the code to new API)
Edit 2:
Just to tack this on here for `gnome-session --session=gnome-wayland --debug`
I'm not expert on this, it may be related to libinput problem. If you don't include GDK_BACKEND=wayland environment variable when launching gnome-wayland.
Last edited by jdbrown (2015-03-01 08:04:39)

Cannot perform a clean install of CF 10 - ODBC Agent and ODBC Server are not in Services - Win2k8 R2

I've tried to perform a clean install on a Win2k8 R2 x64 server several times and I can't seem to get it to install.
I was upgrading from CF 9, which took several attempts. I eventually got CF 10 working and running with the latest updates. But the server would only run for about 15 minutes and everything would come to a screaching hault. ColdFusion pages would fail to load with no error. The pages would hang and wait for the server to respond, which it never did. Restarting IIS would fix the problem.
I have about 20 CF sites on the machine. I came accross an article that talked about pool sizes, etc. I ended up trying a few things with the Web Server Configuration Tool, and as I was adding/deleting servers, I got an error that some application unexpectedly quit, but it wasn't the wsconfig tool. This happened about 3 times as I was deleting servers that I had previously added. Then I tried loading the CF Admin and I got a 500.0 internal server error.
So I bit the bullet and figured I would start all over again. I uninstalled CF 10... now there's nothing on the machine. Re-installed CF 10, and I get the same 500.0 Internal Server Error. I uninstalled, restarted, installed... same thing. Then I found an error in the event viewer that reads:
The description for Event ID 0 from source ColdFusion 10 ODBC Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ColdFusion 10 ODBC Server error: 0
StartServiceCtrlDispatcher Error!
Then I found out that neither the ColdFusion 10 ODBC Agent or the ColdFusion 10 ODBC Server have been installed... at least they're not showing up in the list of services. msconfig also shows that they don't exist at all. I tried reinstalling several times and I can't get them to show up.
PS: It's 6:15 AM and I've been working on this since 10 PM last night. I NEED HELP! Thanks!

Hello,
Once you move your application from any prior version of ColdFusion to ColdFusion 10, you will have to tune your application, as the architecture changed from JRun to Tomcat.
You can refer to the article http://blogs.coldfusion.com/post.cfm/tuning-coldfusion-10-iis-connector-configuration for parameters, that needs to be tuned appropriately to make CF connector works flawlessly.
Hope this helps
Regards,
Anit Kumar

InvisibleSHIELD wetting agent?

Similar Messages

Maybe you are looking for