Invocation of SOAP Sender Adapter using Apache SOAP

Hi,
I'm trying to invoke the XI SOAP Sender Adapter using the Apache SOAP API. It seems that my message header is missing a few parameters (see exception below). Does anybody know which to set?
Regards,
Heiko
==========
Exception:
<?xml version='1.0'?>

<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'>
<SOAP:Body>
 <SOAP:Fault>
 <faultcode>SOAP:Server</faultcode>
 <faultstring>Server Error</faultstring>
 <detail>
 <s:SystemError xmlns:s='http://sap.com/xi/WebService/xi2.0'>
 <context>XIAdapter</context>
 <code>Exception</code>
 <text><![CDATA[
com.sap.aii.af.mp.module.ModuleException
 at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:502)
 at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl3.process(ModuleLocalLocalObjectImpl3.java:103)
 at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:227)
 at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process(ModuleProcessorLocalLocalObjectImpl0.java:103)
 at com.sap.aii.af.mp.soap.web.MessageServlet.callModuleProcessor(MessageServlet.java:162)
 at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:507)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:392)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged1(Native Method)
 at java.security.AccessController.doPrivileged(AccessController.java:321)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)
Caused by: java.lang.Exception: Bubble configuration error: parameter 'XI.InterfaceNamespace' is missing
 at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.getParaRequired(XISOAPAdapterBean.java:895)
 at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.createDefaultMessageHeader(XISOAPAdapterBean.java:942)
 at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.setup(XISOAPAdapterBean.java:214)
 at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:496)
 ... 22 more
 ]]></text>
 </s:SystemError>
 </detail>
 </SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>

Hi Heiko,
You are missing the Namespace Parameter in the sender soap adapter configuration in XI3.0
Thanks
Prasad

Similar Messages

Error Archiving File in File Sender Adapter using AF_Modules/PayloadZipBean

Hi everybody.
I have to pick a zip file up from ftp server, unzip an convert the file in xml.
Im using this modules in file sender adapter:
AF_Modules/PayloadZipBean --> To unzip de file
AF_Modules/MessageTransformBean --> file to xml
The problem is when I try to archive de file. Im getting this error and I dont know why (This path exists /out/ProcesadosSinError/)
Could not archive file 'test.zip' as '/out/ProcesadosSinError/20100518-091029-155_test.zip' after processing: java.io.FileNotFoundException: /out/ProcesadosSinError/20100518-091029-155_test.zip (A file or directory in the path name does not exist.)
Could it be that is not possible to archive with AF_Modules/PayloadZipBean?
Thank u so much

Hi Stefan.
Absolutely. This path exists. It's an absolute path from root. I can´t understand the error!!!!
Thanks!!!
Edited by: Christian Abad Chico on May 18, 2010 9:35 AM

Configuring file sender adapter using share

Hello! I need to read file from shared directory with user name and password. How can I configure user name and password verification?

Hi,
If you are accessing the file in the same server(shared directory) then there is no need of user name password.NFS protocol used for accessing the file in the local server path.i thing shared directory is created in XI server for accessing you from your local PC.If then that authentication for accessing you from your local PC to XI system.Not for XI-file adapter.
If you are accessing the file from different server then you should use FTP protocol.That time only user name and password require.
Regards,
Prakasu.M

Suggesion required in schedulin sender adapter using availability time plan

Hi Experts,
I have to schedule sender JDBC adapter as per below business requirement:
Every month i have to exclude first 5 days and remaining days adapter has to run till month end.
I have selected monthly frequency in Availability time plan and provided 5 days as duration. I have selected excluded option to stop adapter for first 5 days. I have checked the communication channel monitoring, communication channel status is showing stop after 5th day also.
Please suggest me in this regard. What ever i have done is correct or do i need to change the settings in availability time plan??
Regards,
Bhuvan.

Answer: Pick Availability Time Daily and select start series and end series date as needed.. Same date for Availability times from and to.
Click display and then check the dates you dont need (i.e first five days) and click exclude. That's it.
>>When you pick monthly, it means the schedule is once in a month. --- Wrong
Edited by: Baskar Gopal on Mar 11, 2011 2:39 PM

Specifying Additional Files in an FTP Sender Adapter

Hi,
Has anyone worked out how to specify additional files in a File/FTP Sender Adapter using the FTP transport protocol? This functionality comes 'standard' in the File/FTP Sender Adapter using NFS transport protocol so that additional files can been included as attachments, however, it doesn't seem to be available when trying to use the FTP protocol.
Thanks in advance.
Regards,
Reuben.

Yes this is available in only NFS mode check sap help
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/frameset.htm
Thanks!

File sender adapter and content conversion with polish character

We are loading a csv file with PI 7.0 file sender adapter using "content conversion" - all fields go through EXCEPT a special character hex '208C' (space in front) looks like "Æ" is converted to hex 'C28C'.
We are using code page UTF8
We are using:
enclosuresign "
enclosuresignescape ""
fieldcontentformatting nothing
enclosureconversion NO
Hope some one can help

Hi Bohamo,
Hope you have set the following for your file sender adapter :
1. Transfer Mode is set to Binary,
2. File Type Text,
3. Encoding ISO-8859-1( for Western European Latin ).
Inorder to recognize Polish Character, try as follows :
Your sender file after coming into Pi has XML encoding declaration 'UTF-8'.
Write a simple XSLT mapping to change the value of the attribute "encoding" to "ISO-8859-1" in the output XML of message mapping . Include this XSLT map as the second mapping step in your interface mapping.
First step in your interface mapping will be your already existing message mapping.
An example of the XSL code :
<?xml version='1.0'?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method='xml' encoding='ISO-8859-1' />
<xsl:template match="/">
<xsl:copy-of select="*" />
</xsl:template>
</xsl:stylesheet>
or you can also do java mapping if you are comfortable with java code !
Cheers,
Ram.

Multipe Sender RFC using same Program ID

Hi all,
I have RFC>XI>HTTP scenario. All confiruation has been done in R/3 and XI has ben done correctly.
Is it possible to use the same TCP/IP port Program ID created in SM59 (in R/3) for sending different RFC messages to XI. Meaning, in different XI RFC sender adapter communication channels, can I use the same Program ID.
When I tried, it work for one RFC, but when multiple RFC sender adapter uses same program ID..RFC program errors out in R/3 itself with error message - Commit fault: com.sap.aii.af.rfc.afcommunication.RfcChannelMismatchExcept.
Please help.
Thanks
Karthik

Karthik,
It is possible to send different messages from R3 to XI that use the one RFC destination and Program ID (in R/3) and the one Communication channel (in XI)
Assume that interfaces AAA and BBB have different structures
SAP R/3
For interface AAA
(1) Execute ABAP Z_AAA which
(2) Populates the internal table ITAB_AAA with structure ZST_AAA
(3) Calls the remote enabled function ZFN_AAA
(4) Passes the interface data in the tables statement
CALL FUNCTION 'ZFN_AAA' DESTINATION RFCCOMMON
 EXPORTING
 =
 IMPORTING
 =
 TABLES
 AAA = ITAB_AAA.
For interface BBB
(1) Eexecute ABAP Z_BBB which
(2) Populates the internal table ITAB_BBB with structure ZST_BBB
(3) Calls the remote enabled function ZFN_BBB
(4) Passes the interface data in the tables statement
CALL FUNCTION 'ZFN_BBB' DESTINATION RFCCOMMON
 EXPORTING
 =
 IMPORTING
 =
 TABLES
 BBB = ITAB_BBB.
Each function is called with the same destination RFCCOMMON
In SM59 point the RFC destination RFCCOMMON to your XI environment and provide a program id, for example ID_COMMON
XI
(1) Configure the sender RFC Communication Channel for example CC_COMMON and enter your SAP R/3 server parameters to include the program id ID_COMMON
(2) Configure the Receiver Determinations as follows
For interface AAA
Sender Service Enter your SAP R3 Business System for example R3PROD Interface ZFN_AAA (this is the SAP R/3 remote function)
Namespace urn:sap-com:document:sap:rfc:functions
Configured Receivers
Service Integration Process AAA
For interface BBB
Sender Service Enter your SAP R3 Business System for example R3PROD
Interface ZFN_BBB (this is the SAP R/3 remote function)
Namespace urn:sap-com:document:sap:rfc:functions
Configured Receivers
Service Integration Process BBB
(3) Configure the Sender Agreement as follows
For interface AAA
Sender Service R3PROD
Interface ZFN_AAA
Namespace urn:sap-com:document:sap:rfc:functions
Sender CC CC_COMMON
For interface BBB
Sender Service R3PROD
Interface ZFN_BBB
Namespace urn:sap-com:document:sap:rfc:functions
Sender CC CC_COMMON
Regards,
Mike

Use of variable header XHeaderName1 in SOAP sender adapter

Hi all,
I have a doubt regarding the use of adapter-specific attributes in SOAP sender adapter. In specific:
the SOAP client should be able to pass a variable with the SOAP request (XHeaderName1 header variable) and this should be available in mapping (Dynamic configuration)
I've already checked the [help page|http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm] but it seems I'm doing something wrong.
I tried with those settings in SOAP adapter configuration:
Keep headers checked
XHeaderName1 = Test
I try to call the SOAP adapters in the following 2 ways, but none works (the value is not available in message mapping with Dynamic configuration)
1. Pass "Test" value xxxx in SOAP Header as a tag
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
 <SOAP-ENV:Header>
 *<Test>xxxx</Test>*
 </SOAP-ENV:Header>
 <SOAP-ENV:Body>
 </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
2. Pass "Test" value xxxx in SOAP URL
http://host:50000/XISOAPAdapter/MessageServlet?channel=p:s:c&version=3.0&Sender.Service=...&Interface=...&Test=xxxx
Could anyone give me a hint about how to pass those values in the SOAP call and eventually the correct config. of SOAP sender ?
Thanks a lot,
Manuel

Hi Manuel,
Could you give a bit more detail on how you handled the SOAP message yourself.
I have a similar issue. I am consuming a non SAP Web Service which requires a non-standard token element to be passed back. I have created a an RFC sender to SOAP reciever scenario which works fine for the inital logon and returns the token it expects in the follow up messages.
At present I'm at a loss so your help would be much appreciated. We have got round the immediate issue by creating and sending the SOAP message directly from SAP WAS.
Could we use the XI Adapter and ABAP proxy in a similar way?
Thanks,
Tim J.

Using SOAP Sender adapter in PI 7.1

Hi Guys,
I've created a sync scenario with SOAP sender adapter, but I have troubles with calling it.
I use following URL: http://<host>:50000/XISOAPAdapter/MessageServlet?channel=:BS_Bus_Sys:CC_SOAP_Test as I did in XI 3.0, but I'm getting error HTTP 400 Bad Request. I'm using the request generated from the IR Configuration.
Has something changed in 7.1 for this type of scenario?
Thanks guys,
Olian

Hi! Olian,
I think u r going in a wrong way. The above given URL is wrong and incomplete one.
The above url comes only after generating the WSDL. You ill gives that URL to ur source team to post their data at which this URL itselfs acts as an Gateway to enter into SAP XI/PI.
The generated WSDL contains URL like this>>
"http:// Host:Port/XISOAPAdapter/MessageServlet?senderParty=&senderService=Business Service&receiverParty=&receiverService=&interface=SenderInterfaceI&interfaceNamespace=http://XXXXXXXX" />
Also follow the below procedure for generating the WSDL.
Except generating WSDL remaining all development steps are same as creating File to Proxy Scenario.
CREATING THE WEBSERVICE IN XI :
1) In Integration Directory, go to Tools tab --> Define Web Services.
2) Now one Wizard window will opens and follow the below steps:
Here donu2019t go for the u2018 Proposed URLu2019, instead specify the URL as::
http://<host>:<j2ee-port>/XISOAPAdapter/MessageServlet?channel=:<service>:<channel>
If there is party then ::
http://host:port/XISOAPAdapter/MessageServlet?channel=<party>:<service>:<channel>.
3) Specify the Source Messageu2019s Message Interface.and remaining other input parameters.
4) Specify the Sender Business Serviceu2019s details:
5) Here, Cross check the details displayed and then click on u2018Finishu2019 button to create the Web Service
document(WSDL)
6) Now Save the WSDL code to the local system. At the bottom u ill get URL based on the above input
URl:
Note: Here in XI there is no XML Testing tool or SOAP client tool to test SOAP messages. That is why most of the people prefer either ALTOVA XML SPY Tool or SOAP CLIENT TOOL or INFO PATH.
If your working on PI 7.1 means::
1) Simply after creating Sender Agreement go to options above to that sender agreement instead of tools menu... and there you can observe 2 options at the bottom side.
a) PUBLISH in SR
b) Generate WSDL.
2) Once after activating your ID componenets just Press or go for option Publish in SR. Then automatically it will generate WSDL and publish that WSDL in the SERVICE REGISTRY. which is latest concept in PI 7.1.
3) Now by entering authentification details you can able to enter into service registry.
There are 4 tabs::
a) Service definitions
b) Publish
c) classifications
d) Manage.
Go for Service definitions::
4) Enter your sender SOAP interface and press GO or enter.
5) Select your interface and then at the bottom u can observe again 4 tabs:
a) General b) End Points c) classifications d) System Details.
6) In the general you can able to see your WSDL URL by again entering Authentification details.
7) Now Click End Points>Test Button>Enter Authentification details-->Seelct your Interface
Note:: Now you can test your scenario in this WEB SERVICE NAVIGATOR.
8) There you can enter you can pass your Input data parameters in your SOAP interface and execute or test your scenario here itself without any using of external tool like Altova XML or SOAP client tool.
I hope the above information will give you a detailed information in generating and testing webservice right.
Regards::
Amar Srinivas Eli

How to use SOAP sender adapter

Hi all
i have configured the SOAP sender adapter. Now my 3rd party needs to send me a soap message.
I have checked that the status at the following URL is OK:
http://host:port/XISOAPAdapter/MessageServlet?channel=:MXII_Web_Service:SOAP_MXII_Sender.
This is fine, however
I am unsure of the following:
1. Does XI make a wsdl available to the 3rd party?
2. Where does my 3rd party send the soap message to?
3. Is the SOAP message sent via a query string?
4. Do I need to create a web service?
Thanks for all your help in advance
Clinton

Hi Moorthy
Thanks for your answer.
The problem was solved, we used .Net to write a webservice to our wsdl.
I have now another problem.... When the message comes into XI it shows that no receiver found(RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC). If I just test the scenario with a file adpter as Sender, and Receiver it is fine, but when using the SOAP adapter as Sender, it gives me the no receiver found message.
Any help with this issue will be appreciated.
Thanks again
Clinton

How to send images using SOAP adapter

hi All,
I want to send images using the SOAP adapter . ( Sender and Receiver )
Can anybody help out with this requirement
Regards,
Loveena

Hi,
Following links may help U
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm
to know the basics about soap adapter u cn check out this link
/people/padmankumar.sahoo/blog/2005/02/15/an-overview-of-soap
to get in detail about the attachments chk out this link
hi i am unable to attach an attachment in File to mail scenario
Regards
Pullarao

Use Moduls with SOAP Sender Adapter

Hi Experts,
I have a question regarding the use of modules in the soap sender adapter / communication channel. Is it correct that the use of modules in the soap sender adapter is not possible?
the background of my question is that we use modules from SEEBURGER in our Communication channels for archiving incoming and outgoing documents. the use of modules in the soap receiver adapter is possible. why not in the soap sender???
according to the sap help it is possible to use the axis framwork in the soap adapter. then it should be possible to use modules. Is that correct? I tested it but it is not working. If I send a soap message (with the soap reveicer adapter) to the axis soap sender adapter there occure internal server errors. it is only working if I write my own modules for the axis soap sender adapter? is it not possible to use external modules like in other channels (File/FTP, soap receiver etc.)???
thanks and best regards!
Christopher

we have moduls from SEEBURGER. so I have to test it. but before I need a scenario with which I can test it.
We have a customer who sends xml-files per soap to us. these files we receive succussfully with the soap sender adapter. now we want to use some modules. so we have to use the axis soap sender adapter. I tried to send an xml file with the soap receiver adapter to the axis soap sender adapter, but this was not working. http 500 internal server errors occurred. is it possible that this scenario (soap-to-axis-soap) is not working? need I a specific configuration for this?
thanks and regards
Christopher

Using custom http headers in SOAP sender adapter

Hi,
my problem is exactly the same as reported [here|Re: SOAP Sender - Extract Header Values;] and [here|Variable Transport Binding - Soap Sender;
Basically I'd like to send through the soap sender adapter some custom http headers. I check the necessary options in the advanced tab (set adapter-specific message attributes and variable transport binding), and in the variable header one I put x-StoreCode, which is the same http header I send to PI.
But I won't see anything in the dynamic configuration section when the message is persisted in PI.
Very surprised that I've seen this issue is a common problem others have faced before without success.
Thanks!

Hi Michal,
the extra info I'm trying to send separated from the message is an http header, not part of the query string.
If I incorporate the extra info as a parameter to the query string like this, for example:
http://host:50000/XISOAPAdapter/MessageServlet?senderParty=&senderService=S1&receiverParty=&receiverService=&interface=Int&interfaceNamespace=urn:test&x-StoreCode=13&nosoap=true
Then I can see the value in the dynamic configuration section:
<SAP:Record namespace="http://sap.com/xi/XI/System/SOAP" name="SQueryString">senderParty=&senderService=S1&receiverParty=&receiverService=&interface=Int&interfaceNamespace=urn:test&x-StoreCode=13&nosoap=true</SAP:Record>
But what I'm trying to do shoould be possible, according to sap help:
http://help.sap.com/saphelp_nwpi71/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm (section Define Adapter-Specific Message Attributes)

Communication using Sender soap adapter using secured certificates

Hi All,
For sender soap scenario,
We have installed 3rd party certificate on XI and we have give them XI SSL certificate to 3rd party.
We are getting handshake error when they send message using XI URL.Can you please tell me in which location on webserver where 3rd party has to install certificate and what all settings
I need to give in communication channel and sender agreement?
thanks a lot.
Best Regards,
Harleen Kaur Chadha

Can you please tell me in which location on webserver where 3rd party has to install
certificate and what all settings I need to give in communication channel and sender agreement?
Check this link to know more:
http://help.sap.com/saphelp_nwpi71/helpdata/en/32/1c1041a0f6f16fe10000000a1550b0/frameset.htm
Also there is a Blog by Alexander on Principal Propagation....you can refer it to know more on how, where to include the certificates..
Regards,
Abhishek.

SOAP Sender Adapter Not working

We have the following Synchronous sceanrio: Third Party System <> PI <> SAP ECC
The interface works well in our DEV and PreProd environments but has stopped working in our QA environment.
The SOAP Sender Adapter is giving me the following error:
failed to initialize: org.apache.axis.ConfigurationException:
java.lang.ClassNotFoundException: ------------------------- Loader Info -------------------------
ClassLoader name: library:com.sap.aii.af.axisproviderlib] Living status: alive Direct parent loaders: system:Frame library:com.sap.base.technology.facade library:engine.j2ee14.facade] Resources:
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/axis.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/commons-discovery-0.2.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/commons-logging-1.0.4.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/commons-net-1.0.0-dev.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/wsdl4j-1.5.1.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/xmlsec-1.4.0.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/wss4j-1.5.6.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/opensaml-1.0.1.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/xalan-2.6.0.jar
Currently the Quality of Service for the communication channel is set to "Best Effort" because it is a Synchronous Interface. However if I change the Quality of Service to "Exactly Once" the message is received by PI without any problems. So the problem is specific to Synchronous.
I tried to create a new communication channel and use that but that didnt help.
We have checked on the server and all the above mentioned .jar files are all in place.
I have compared the Processing Sequence and Module Configuration of the Module tab (for the communication channel) with the other environments and everything seems to be fine.
Any help would be much appreciated.
Thanks,
Krishneel

Hi Krishna,
ClassLoader name: library:com.sap.aii.af.axisproviderlib] Living status: alive Direct parent loaders: system:Frame library:com.sap.base.technology.facade library:engine.j2ee14.facade] Resources:
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/axis.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/commons-discovery-0.2.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/commons-logging-1.0.4.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/commons-net-1.0.0-dev.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/wsdl4j-1.5.1.jar
Have you deployed the following Jar.
commons-discovery-0.2.jar
○ commons-logging-1.0.4.jar
○ commons-net-1.0.0-dev.jar
○ wsdl4j-1.5.1.jar
Refer this
http://help.sap.com/saphelp_nw04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/content.htm
Edited by: Debashish Roy on Jul 18, 2011 10:10 AM

Invocation of SOAP Sender Adapter using Apache SOAP

Similar Messages

Maybe you are looking for