Invoic Message type

Hi,
I have requirement to post invoice(MIRO) thru idocs . I was using INVOIC01 message type(not sure whether I am using the right one or not b'coz in this i hav seen somebody using INVOIC02 for the same requirement Please suggest me)
And after all configuration in OBCA,OBCB,OBCE,OBDC ---
When I am testing in we19 iam error that "Messages from IDoc processing can be found in application log" or A company code cannot be determined for LI 0000200004
This is inbound idoc.
It will helpful if anyone can provide the full config and mandatory segments which needs to be populated and also we20 settings also.This is the first time iam working with this one.
Iam using partner LI .In we20 settings seems ok.
TIA.
Rhea.

Hi
Check this
http://www.sap-hefte.de/download/dateien/1156/100_leseprobe.pdf
and search with this "Messages from IDoc processing can be found in application log"
I am not sure about this but it can help you
Regards
Pavan

Similar Messages

Is direct GL account entry possible via EDI invoic message type?

Is direct GL account entry possible via EDI invoic message type? Is there a field in Invoic Idoc that matches the direct GL entry field. Some vendors may have surcharge other than tax and unplanned delivery.

This functionality is not available as standard. However, from release 470, you can use customer exit EXIT_SAPLMRMH_015 for direct posting to the G/L account or material account.
Please have a look at attached note 427137.

Output medium 5 not working for invoice message type

Dear all,
we have an issue with output medium 5 for comercial invoices. We have defined current message type ZRD0 with this output medium (it still has other mediums assigned like 1) because when we create a comercial invoice we want to send the invoice automatically to customer mail as a pdf file.
We have followed the instructions:
-we have add this medium to message type and it has assigned exactly the same program and smartform as medium 1).
- Communication strategy is already defined as it is being used for vendors mails.
- Customer has e-mail address filled and my user in SU01 has a mail defined.
Unfortunately mail is not being generated but spool is being generated?!? For vendors this output type is working fine, we are sending the PO to vendor's mail as pdf file and I don't understand why it's not working.
Any ideas??
thanks in advance,
Raquel

Hi Raquel
Firstly In the output type ZRDO output type , check wheather the transmission medium has been checked or not. Secondly also check in VV32 with what transmission medium the record has been maintained.
Finally also check in ZRDO output type wheather pdf file has been maintained or not
Regards
Srinath

SD - Two message category for an invoice document type

Good morning all,
I use InterCompany biling in SD with standard invoice document type 'IV' and message category 'RD04' (which enables vendor invoice creation).
My customer asks to be able to print a form for the intercompany bills.
For the non intercompany bills this is actually performed by using a specific message category.
So my question is : is there any way to have TWO message category ('RD04' + specific message for form) automatically attached to an intercompany bill (customizing, user-exit,...) ?
Best regards.
Didier GOBLET.

Hi Didier
Assign the logic to the RD04 output type smartform.Then it is possible,In the smartform include the logic that it should automatically attach to the intercompany billing.
Regards
Srinath

How to fill plant in control record of an I-Doc , message type - INVOIC

Hi All,
Can any one tell me, how i can fill Plant in control record of an I-Doc, when i generate I-Doc through billing with message type INVOIC. The field (EDIDC-REFGRP) should be fillied with Plant.
Regards,
Suresh Patiapti.

Hi,
Which type of processing you are referring to (outbound/inbound) ? Which standard process code is used for idoc processing?
Regards
Vinod

Proforma Invoice - IDoc and message type

Hi,
The requirement is to send proforma invoice to legacy system upon creation. We use PI as middleware.
Is it possible to send to proforma invoice data using IDoc?
If IDoc then we have to use message control? Am i right?
What is the process code and what is the basic IDoc type/message type to be used for this?
Thanks for any help.
Cheers,
Srini

Hi Srinivasan
Basic type           INVOIC01 Invoice/Billing document
Message type                   INVOIC     Invoice / Billing document
Process code         SD09
Description          INVOIC: Invoice
Function module      IDOC_OUTPUT_INVOIC
best of lucks and Happy Diwali
Nandu

Message type 'INVOICE' for intercompany billing?

Hi all,
I have a requirement that i have to create the invoice receipt for FI when the billing document is created in the same client?
Please provide me the details for this
such as output type and process code and other master data settings that have to fill?
Thanks,
Vamshi.

Hi,
For creating a intercompany invoice interface you need to do the following steps:-
1. You need to maintain the Account at Customer in the customer master
2. Ask your functional consultant to create an output type for you for this interface and let that output be triggered in the billing document.
3. You need to create a partner profile for Customer and Partner Role as BP. Message Type INVOIC, Message code FI and Process Code as SD08.
4. You need to maitain the logical address to convert it to the vendor, this entry is maintained in the table EDILOGADR.
5. Till now what ever you maintained is for the outbound interface.
6. You need to create a partner profile for the vendor as Message Type INVOIC, Message Code FI & Process code INVF.
7. The FI functional consultant has to enable that vendor as EDI and he has to make the necessary setting for the document to be posted successfully.
If your functional consultant is not in a position to do them, you can ask me and i will help you to do those setting as well.
Thanks,
Mahesh.

Details for ALE Message type 'INVOICE' for intercompany billing ?

Hi all,
I have a requirement that i have to create the Invoice receipt for FI when the billing document is created ( VF01) in the same client?
Please provide me the details for this
such as output type , process code and other master data settings that have to fill?
Thanks,
Vamshi.

Hi prakash,
Thanks for the reply and it is very helpful.
But i am using message type RD00 and shall i use this?
Else, please specify the details that i have to maintain to use RD04 clearly stap-by-step?
Thanks,
Vamshi.

Invoice Response Message Type ?

Does anyone know if there is a Standard Message type to send an IDOC response back after receiveing a Logistics Invoice ?

Hi,
Please go through this [ document. |http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe?quicklink=index&overridelayout=true]
Thanks,
Abhijit

Any Idea Which Message type/Idoc Type should be used for FI Invoice

Hi Experts,
Any idea what message type/Idoc type should be used for FI invoice. We are going to send IDOC from R/3 to Non-SAP System using ALE. We are using T-codes FV60/FV65.
Thanks,
Sony

Hi Sony,
I never dealt with FI IDoc.
I think you need to setup EDI outgoing payment in IMG. Please take look this report <b>RFFOALE1</b> - ALE Distribution of Payment Data and <b>RFFOEDI1</b> and check also the program documentation.
Hope this will help.
Regards,
Ferry Lianto

ALE-IDoc : Outbound message control for MIRO,IDoc message type for INVOIC

Dear Experts,
                    I am using the IDoc message type INVOIC. For that i have created the new output type. Then i assinged the the Program RSNASTED and form routine ALE_PROCESSING.
                    But when i am saving the transaction in MIRO i am getting the Update Error like VN 056: Processing log for program RSNASTED
                    Please help me to rectify this problem

Hi Dharmendiran,
We also have the same requirement to send status acconf messages on Inbound INVOIC idoc posting..
Can you let me know how you went about creating new output type..did you mean new output type in NACE for application MR?
Thanks.

PO invoice through IDOC --Need Standard Process code and Message Type

Hi All,
could any one send me SAP Standard Message type and SAP Standard process code for posting Vendor PO invoice.
Thanks
Raghu

Hello,
Standard Message type: INVOIC, Process Code: INVL, IDOC type INVOIC02.
Thanks,
Venu

Message Type ( Idoc Type ) for customer master & Pending invoice

Hi
My Client is doing sale in POS for credit customers and credit customer master should be sent to POS as outbound Idoc.
1.What is the standard message type for sending Customer masters to POS. WP_PER01 is not activated for version 700 ( message getting on WE60 ). Plse let us know is there any another message type for customer master.
2. Also i need to send the credit limit of the customer to POS . Is this possible by standard message type or we need to go for ZIdoc?.
3.Is there standard Outbound Idoc ( Message type ) available to send the Pending invoice list toPOS?
plse help me on the above
Regards
Anis

Hi ,
you can use DEBMAS message type for customer master IDOC ,
Tcode Bd12
Thanks,
Amit

Multiple customers for same message type "invoic" and idoc type "invoic02"

Dear Experts,
I have SAP ALE process configured for single customer u2018Au2019 where I send invoic02 idoc (message type invoic) to the customer via PI server. Now I need to add one more customer u2018Bu2019 which require recepient determination. I am not sure whether this resolution of customer address at PI level or config is required at R3 itself.
I tried to maintain partner profile type as KU but it generates the error "No partner profile is maintained". For existing customer u2018Au2019 I am keeping the partner profile type LS.
I want to know the following:
a.Whether the recipient determination at R3 (config of partner profile we20)- if so what are the essential steps. Do I really need to shift partner profile type as KU?
b.Whether config is required at PI level itself- if so is there any pre-requisite config in R3 to support that in PI.
I hope my question is clear since this is my maiden attempt to seek solution from expert group.
Regards & Thanks

Hi ,
if you want to trigger the idoc two times for basic type& Extension..
1 ) you need to maintain WE20 Partner Profiles (This is good already you did)
--> But the Output type for Bsic type & extension type is same so output type is triggered Once so idoc is created One.
2) try to create another Output type in T-code NACE for extension then two Idocs is created one for Basic and another for Extension.
Regards,
Prabhudas

ISU Billing/Invoicing IDOCS and Message Type

Hi,
Could any body provide me the list of IDOCS and Message types for Billing and Invocing Module. I was unable find the list across web.

To get the idoc list , u should go to the transaction WE02, and give the search parameter as the basic type of the above said message types..

Invoic Message type

Similar Messages

Maybe you are looking for