Invoice 29869 is appearing in the aging report though it been fully paid up

hi ,
I have problem that posting below
Invoice 29869 is appearing in the aging report though it been fully paid up
can any one tell me what is the reason
Regards
Srinivas
Edited by: Darius Heydarian on May 9, 2008 2:33 PM

Please check if you are running the Aging Report from the By Journal Posting tab and also checked Display Reconciled Transactions
Suda

Similar Messages

  • Reconciled amounts appears in vendor aging report

    Dear all,
    When we take report for reconciled transactions,reconciled amounts appears in
    aging days(Suppose we have ap invoice in 0-30 days and payments made in 30-60 days it's
    already reconciled)
    Why it is showing in reconciled aging report ?
    Jeyakanthan

    Dear，
    would like to recommend you to refer to the following note： 1228363-Business Partner Balance does not match journal entries。
    In any SAP Business One version lower than 2007, 2 separate
    reconciliation engines were employed. One reconciliation engine worked
    on the marketing document level, where partial reconciliation was
    supported & the other worked on the journal entry level, where only
    complete reconciliation was supported.
    This duality led in some instances to reconciliation inconsistencies
    which were initially highlighted with SAP Business One version 2004
    patch level 29, where the red message 'Business Partner balance does not
    match journal entries' was displayed when running the ageing report by
    sales documents & inconsistencies were detected.
    In the year end closing guides (available for download from the
    Documentation Resource Centre) SAP have always recommended to run the
    ageing reports by journal posting.
    In 2006, SAP published note 752261, now retired, documenting the system
    behaviour & offering a series of 'Select' queries to aid in
    reconciliation inconsistency analysis. These queries were an excellent
    tool but now SAP can offer a faster, better & more accurate solution.
    In SAP Business One 2007 A & B the reconciliation engines have been
    unified & partial reconciliation on journal entry level is now fully
    supported. Any database that is upgraded from a lower version undergoes
    a complex series of reconciliation upgrade algorithms, where any
    reconciliation inconsistency is identified & a reconciliation upgrade
    (RU) journal entry is automatically created. This RU journal does not
    document any accounting transaction, but simply creates an update in the
    'Balance Due' column, thus notionally re-openeing previously
    inconsistently reconciled transactions.
    These RU journals are then available for internal reconciliation.
    Please consult the 2007 Internal Reconciliation Upgrade(IRU)Landing
    Page:
    Channel Partner Portal -> Solutions -> SAP Business One -> Hot Topics ->
    SAP Business One 2007 Information Center -> New Single Reconciliation
    Engine- A single engine reconciles the difference and eliminates the
    previous reconciliation issue. More
    Click on 'More' to be directed to the IRU Landing Page.
    Here you will find 'How-to-Guides' in all supported languages, links to
    Expert Training Sessions & links to other pertinent information.
    You will also find available for download 2007 A & B upgrade simulation
    tools. SAP recommends to subject a database that is planned to be
    upgraded
    This upgrade simulation tool employs all internal reconciliation upgrade
    algorithms & the application will display in the 'Internal
    Reconciliation Upgrade Audit Trail Report' if a database is affected by
    inconcistencies.
    Hence, if the message 'Business Partner Balance does not match Journal
    Entries' is encountered, proceed as follows:
    Option 1:
    Upgrade database to SAP Business One 2007 & internally reconcile any RU
    journals.
    Option 2:
    Go to the IRU landing page & download the 'IRU pre-upgrade tool' either
    for version 2007A or 2007B, depending on your localisation. Follow the
    installation instructions & after successful installation & simulated
    upgarde of the database, analyse any inconsistencies appearing with the
    help of the How-to-guide. Should a type of inconsistency not have a drop
    down arrow & be described as 'Balancing upgrade journal transaction',
    the comapny accountant may decide to write it off, should the amount be
    insignificant or, if the amount is not insignificant, please log a
    support ticket with the component:
    SBO-ADM-UT-IAT
    Step by step detailed instructions including screenshots of how to
    install the sim-tool & what it does can be found on this wiki page:
    https://wiki.sdn.sap.com/wiki/display/B1/BPaccountBalancedoesnot+matc
    chJournalEntries
    Thanks & Regards
    Apple

  • SGD Exchange Rate Difference JE appears in Customer Aging Report

    Dear Experts,
    SAP Version: 8.81
    Local Currency: SGD
    We perform Exchange Rate Difference for a USD BP to calculate the unrealized gain/loss during month-end, JE created successfully.
    Next, we go to Customer Aging Report and select this USD BP.
    When i choose to view the Aging Report in Local Currency, the USD Invoice will appear in SGD + Exchange Rate Difference JE in SGD, the total balance can appear in SGD with no problem.
    When i choose to view the Aging Report in BP Currency, the USD Invoice will appear in USD + Exchange Rate Difference JE in SGD, i can't see the total balance as it is appeared as xxxxx.
    Above is the behaviour in 881.
    Last time in SAP 2005, when i choose to view the Aging Report in BP Currency, the Exchange Rate Difference JE in SGD will not appear, therefore i can see the total balance in USD.
    What is your opinion about the behavior in 881? Will you consider it as design or issue?
    Thanks.
    Regards,
    Lay Chin

    Dear all,
    This problem is no longer there when upgrade to 881 Patch 08.
    Regards,
    Lay Chin

  • AR - Customer Statement - differences when compared with the Aging report

    I am running the customer statement (the Print Statement program) 'as of date' say 11-Jun-09, and found that the 'Total Amount Due' for a customer is not agreeing back to the balance displayed on the Aging Screen (Navigation: Collections -> Customer Accounts [Aging butto]) for the customer.
    The 'Total Amount Due' on the statement is greater than the balance on the aging report/screen.
    It appears that the statement is selecting more receivables transactions (invoices, credit note, payments etc...) than the aging report is looking at. Also the aging buckets on the statement does not tie back to that on the aging screen /report for example the '4 Bucket Aging Report'.
    My questions are:
    1, Is it possible for the 'Total Amout Due' on the statement to differ from the balance on the aging report/screen?
    2, What factors or reasons might cause the above senario to occur?
    3, How can one start to investigate this in order to account for such differences?
    Ideally what I would like to do is run a sql script that will show what is being selected for the statement 'as of' a particular date for a customer, and another sql that will show the same customer account balance and aging buckets at the same 'as of' date.
    And perhaps another sql that would show the same customer open receivable transactions.
    Thanks.

    Hello.
    This query will show you the customer open receivable transactions:
    select c.customer_name,
    decode(ps.class, 'PMT', 'Payment', 'INV', 'Invoice', 'DM', 'Debit Memo', 'CM', 'Credit Memo') Type,
    ps.trx_number,
    ps.trx_date "Inv Date",
    ps.due_date "Due Date",
    ps.acctd_amount_due_remaining "Amount Remaining"
    from ar_payment_schedules_all ps,
    ra_customers c
    where c.customer_id = ps.customer_id
    and ps.status = 'OP'
    and ps.org_id = &orgID
    and c.customer_number = &CustNumber
    Octavio

  • Reconciled amounts appears in customer  aging report

    Dear all,
    When we take aging report for reconciled transactions,reconciled amounts appears in
    aging days ,the invoices which are reconciled still showing in Aging report  (Suppose we have ar  invoice in 0-30 days and its payments (journal entry ) made in 30-60 days it's
    already reconciled)
    Why it is showing in reconciled aging report ?
    I am using B1 2007 Pl 17
    Regards
    Saurav Gupta

    Hi Saurav Gupta,
    the ageing report allows you to pinpoint open transactions at a particular date.
    Consider this:
    System Date (Today) : 08.08.2011
    Ageing date 01.08.2011
    Invoice Posting date: 20.07.2011, due date : 31.07.2011
    Payment Date for invoice 02.08.2011
    You allow documents to be considered up to the ageing date.
    -> The invoice above, although fully paid, will be shown as overdue since you are ignoring all transactions after the ageing date. As far as the report is concerned, the payment hasn't happened yet.
    With these options, the invoice will be shown as well:
    System Date (Today) : 08.08.2011
    Ageing date 01.08.2011
    Invoice Posting date: 20.07.2011, due date : 31.07.2011
    Payment Date for invoice 02.08.2011
    You allow documents to be considered up to the system date & choose to display reconciled transactions.
    -> all documents up to today will be taken into consideration, meaning that both the invoice & the payment are shown in the report.
    To see the true open documents today, choose these parameters:
    System Date (Today) : 08.08.2011
    Ageing date 08.08.2011
    You allow documents to be considered up to the system date & have all tickboxes unchecked.
    Also, please upgrade your system at the earliest convenience, you are using a very old version.
    All the best,
    Kerstin

  • My CD drive does appear on the desktop even though Finder preferences indicate it should and so do the System preferences. I'm unable to burn a CD-R in iTunes. It tells me the CD burner is being used by another application?

    My CD drive does appear on the desktop even though Finder preferences indicate it should and so do the System preferences.
    I'm unable to burn a CD-R in iTunes. It tells me the CD burner is being used by another application; however, I seem to find out what's using it.
    I'm unable to eject the CD since it not shown on the Desk Top. I have to restart the system to eject the CD?
    Very unclear as to what is happening?

    My CD drive does appear on the desktop even though Finder preferences indicate it should and so do the System preferences.
    I'm unable to burn a CD-R in iTunes. It tells me the CD burner is being used by another application; however, I seem to find out what's using it.
    I'm unable to eject the CD since it not shown on the Desk Top. I have to restart the system to eject the CD?
    Very unclear as to what is happening?

  • I ordered the 'Creative Cloud" student version two days ago, but yet it only appears as the test version, though I already paid for the the first month. What can I do?

    I ordered the 'Creative Cloud" student version two days ago, but yet it only appears as the test version, though I already paid for the the first month. What can I do?

    Burakymz for information on how to resolve the connection error preventing your membership from being authorized please see Sign in, activation, or connection errors | CS5.5 and later.

  • Downpayment is not clearing even after invoice has been fully paid

    Good day to everyone,
    I am currently having an issue with a down payment not clearing even though the invoice has been fully paid. to my understanding, once the order is fully invoiced- down payments should be cleared as well, am i correct?
    The order  related billing's status containing the down payment is set to "fully invoiced", yet when i view the document flow containing the down payment, it states "not cleared". What could be the problem? Could i just manually release the down payment? thanks in advance!

    hi
    if you are doing vendor manual payment program then you clear down payment as below.
    T-Code-F-44 Clear down payment
    Select special gl indicator
    then press enter and clear down payment against invoice.

  • My CC wont open. and Once again my LR and PS keep asking me to licence the software. I am a fully paid subscriber to CC. This issue keeps happening and was only fixed by Adobe lastnight, but its happening again can anyone HELP?

    My CC wont open. and Once again my LR and PS keep asking me to licence the software. I am a fully paid subscriber to CC. This issue keeps happening and was only fixed by Adobe lastnight, but its happening again can anyone HELP?

    This is an open forum with a mix of other users and Adobe staff, not Adobe support... you need Adobe support
    Adobe contact information - http://helpx.adobe.com/contact.html may help
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • HP 4530s system is not powering on from the battery even though battery is fully charged.

    the system cannot power on from the battery even though battery is fully charged.
    below video shows exactly what am experiancing for the past 4 month.   please is there any way out.....?
    <iframe width="854" height="510" src="//www.youtube.com/embed/ucVdOCbRHIE" frameborder="0" allowfullscreen></iframe>

    some one should help....

  • Reconciled transactions appearing in customer aging report

    Hi all,
    I have 2 Invoices amount to 2000 rs say 1000 rs each.I received a payment of 1900 rs i.e a 100 rs less for the 2 invoices.My accountant has recorded this in the following manner that he has selected both the invoices and an "On account" payment of -100, so the entire transaction got balanced.As a result both the invoices are closed as well.
    Now my question is ....can we treat this a reconclied trasaction or an Un-reconciled trasaction.Will these both invoices appear in the customer aging report if we select "display reconciled trasactions" option.
    Regards & Advance thanks,
    Mobin

    Which SAP B1 Version and Patch is under use at your end ?
    There were issues in SAP B1 regarding reconcilliations in versions prior to 2007 series.
    Samir Gandhi

  • Issues in the aging report

    Dear Experts,
    I have a scenario wherein we clear partially a vendor open item with debits or with payments, but system shows both line item as open by which our aging report is not correct.
    Can we clear open item to the extent of partial payment and show only the remaining balance as open item and still the baseline date as per original document but for the remaining amount in FBL1N.
    Please advice.
    Thanks,
    Lokesh

    Dear Lokesh
    Your report will be correct only when you follow the 'Residual' method for partial payments.
    Secondly, your remaining open item should also reflect the correct aging..right?
    For this, you need to do the below mentioned configuration.
    Here for each selected company code and currency combination, you have to do this setting;
    This will solve your problem.
    Regards
    Syed Zia Abbas

  • Page Numbering for the aging report

    Hi,
    Does any one know how I can achieve the following:
    For the customer ageing report we need to print all customer statements at once. On our print layout we currently use the following CurrentPage()/TotalPages() formula fields to dispaly the page number. The result we get is 1/10, 2/10, 3/10....etc.
    We actually need the following, for total 10 pages statement would like to display the page number as follows:
    Customer A: 1/1
    Customer B: 1/3, 2/3, 3/3
    Customer C: 1/1
    Customer D: 1/5, 2/5, 3/5, 4/5, 5/5
    Does anyone know how to achieve the above for continuous print?
    Your assistance in this matter is highly appreciated.
    BR,
    Jimmy

    Hi,
    You are trying to print the detailed aging report. Right?
    It seems that there is no way of "splitting" the page numbers within a collection report.
    The system could not count the pages for EACH customer.The total number per pages will be per whole document, and cannot be per business partner within the same document when using the formula currentpage().
    Regards,
    Jitin

  • Deleted Items Appearing on the FBL3n Report for Open Items

    Hi All
    We just went live and I am facing a huge issue;
    I deleted many migration entries from loads of GL Accounts for multiple Co Codes, but on the FBL3n report, whenI execute with the option of 'Open Items' only, I  still see the deleted items with a green check sitting there.
    How can i get those from being visible?
    Thanks for the support
    RS

    Hi:
                This is standard behavior. Your GL accounts are managed on line item basis hence despite of the fact you reversed the entries they will continue to be shown in open item selection criteria which in fact are not open items. It makes no sense to see a GL account in FBL3N on open item date since this account has been configured on the basis on line item management and i will continue to be shown as line item with green sign . Execute report FBL3N with open item or with all item (with date you give in open item) you will see the same figures and same line items. However you can exclude the reversed entries by fetching reversed with (BKPF-STBLG) field from menu ..settings...special fields and hence excluding the entries having this filed update.
    I hope this will solve your issue.
    Regards

  • I have a DVD that still appears in the finder even though it is not in the computer. What do I do?

    I have a DVD that still appears in the finder, under "places", with the "burn" icon next to it, even though the DVD is no longer in the computer's reader. How did that happen and what do I do? Thanks!

    Humph... I know I have had these experience myself, but don't remember how I solved it.
    What happens if you mark it, and then right-click on the blank gray area (under "places" for example)? Do you then get the "remove from sidebar" option?

Maybe you are looking for