Invoice before GR - Import procurement
Hello!
I have to configure the following scenario:
The foreign vendor is sending the invoice and then the goods, so we have to register first the invoice (to declare the taxes - at a certain exchange rate of the currency) and than post the goods receipt (different exchange rate) and then somehow reconcile the gr with the invoice . Is there a scenario for this?
Thank you!
Please search forum with any of keywords Import or Import procurement or Import procedure,there are lot of answered threads.
Similar Messages
-
Excise Invoice tab during Imports MIGO
Hi
During MIGO for an Imports PO (after doing MIRO for Customs) the system suggest the Commercial Invoice no. in a pop-up & the following happens:
1) If I ACCEPT this commercial invoice no. & move ahead to complete the MIGO, the system does not open up the 'Excise Invoice' tab in the MIGO header.
2) If i DELETE the commercial invoice no. & move ahead to complete the MIGO, the system opens up the 'Excise Invoice' tab in the MIGO header.
Why is this so?
Why does the system suggest the commercial invoice no. here? What are the implications of accepting it or deleting it?
mnp_sapHi,
In Import procurement cycle, you have to capture excise invoice in J1IEX after posting Customs Invoice in MIRO and then do MIGO, here refer excise invoice already captured and after GR POsting, post the excise Invoice in J1IEX.
So check whether you have captured the excise invoice before GR Posting
So follow the below process;
1. Create Import PO - ME21N
2. Post Customs Invoice - MIRO
3. Capture Excise Invoice (BOE) - J1IEX
4. Post GR (Here refer excise invoice) - MIGO
5. Post Excise Invoice (BOE) - J1IEX
7. Post Import Vendor Invoice - MIRO -
BED and ecess - usd values are flowing in J1IG during import procurement?
HI,
When I am doing import procurement with CVD & ecess on CVD, Secess on CVD conditions - all the condition values are flowing in USD values even though the condition base value is copied in INR in J1IG (excise invoice at depot,
kindly let me know why it is not floing in INR, and what are the possible causes for this.
regards,
archanaDon't you do a custom MIRO ( plan costs) on the customs vendor for the customs duties ( BCD, AED, CVD and all cesses ) before doing the material receipt?
-
CIN : Excise invoice before Commercial Invoice
Hi All,
Please tell me how to configure TAXINN and CIN settings in case, when we want to create excise invoice before commercial invoice.
I know this can be done but don't know how, please help.
Thanks and regards
AmitHi Amit.,
TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important points is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity; you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
IndiaMake for Logistics General, by choosing Taxes on Goodsthe settings in Customizing Basic Excise Duties Using Condition Technique and Movements Account Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate access from Maintenance screen, which you can Masterthe SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.Data
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use: In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax on Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
you have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use sub transaction types, enter the accounts for each sub transaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Logistics General 1. Go to IMG Define Structure of Data ScreenMaterial Master Configuring the Material master Screen Sequence. for each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
REWARD if helpfull
Thanks & Regards
Narayana -
Import Procurement Process.
Dear Gurus,
Is there any error message or some setting, so that at the time of GRN system will show the message that Custom invoice not prepared.
At the time of GR against Imported PO, systems prompts for Customs Invoice No & Year , if user cancelled it , then also systems allows to do GR .
our requirement is to streamline the process of import procurement.
1. P.O. creation with zero taxes and import duties with respective vendors.
2. Invoice verification for custom duty.
3. Goods receipt.
4. Post excise invoice.
5. invoice verification for goods.
if this is not followed the system should give error message. is there any user exit or badi which can serve our purpose.
Regards,
AshishHi Ashish,
You are trying to only make it a mandate at the Pop up window or you want to control the whole process from PO to LIV?
The Latter is too much of controls.. what you can do is control at the pop up window and make it a mandate field..
Take help of some abaper and create a GR in de-bug mode to know the exact screen details where this input field has to be changed to mandate.
In the mean time I will try and get some exit details. As MIGO is a big program, it is difficult for funtional consultatns to find the right user exit.. ABAPer's maight do it faster.
Thanks & regards
Hameed Parvez -
Payment of Invoices before GRN
Dear All,
We need your help to improve our payment process. As we are sending various shipments via ocean freight to save on
transport costs, all USA based supplier’s invoices become due prior to the shipment arriving at our location.
Currently the way of doing this is by making a manual entry and then the GR/IR does not tie up at all.
Can you pleasee suggest how we should go ahead so that our books get cleared and GR/IR also balances.
Can we do through advance payment or if some good suggestion u r having.
regards
VikrantI am assuming that, you are procuring on FOB terms and hence vendor payment needs to be processed within 30 days of dispatch, and not based on the date of receipt at your end.
in such cases, you will have to create PO with GR based IV unticked or not selected, so that you can process invoice for supplier without GR, and as terms are FOB, you are liable to pay as soon as goods are dispatched from their port, irrespective of your receipt of goods/quality of goods or qty of goods. So if you process this invoice it will be in foreign currency and hence you will post this invoice (before GR). System will create balance in GR/IR account. And hence when you post actual GR, system will nullify the same GR/IR account with the amount as per the invoice value (in local currency). So there is no difference as far as value is concerned. I hope this clarifies your problem.
Regards,
Dakshesh -
Dear All,
I have configured separate pricing procudure, superate Document Type.
I have created Import vendor with Vendor currency and custom vendor with INR currency.
Now i am creating Purchase order for Import Procurment.In that PO exchange rate will come automatecally.Then i am giving prices based on import pricing procure.
At the time of PO Creation where can i see vendor currency amount and Indian currency? My client wants both amounts at the time of PO Creation.
Please tell me how to create PO For Import.
Thanks in advancehi,
You can check the Currency to which you wanna do exchange and the exchange rate in the PO header under del./invoice tab ...if you wanna change here you can also change and make it fix..
There is no place to get it all details in the PO...better create the new field you the data from the CURR table...
SAP has given the userexit to create the new field in the PO/PR doc...
MM06E005: Customer fields in purchasing documents
MEREQ001:Customer's own data in purchase requisitions
Regards
Priyanka.P
Edited by: Priyanka Paltanwale on Oct 8, 2010 10:15 AM -
Dear All,
I have the following scenario:
I make an Import PO for import Procurement with account assignment " Asset " in the PO.Under Indian Scenarios, the following duties are applicable while Imports
CVDs with Its Ecess and HECess, Additional Custom Duties
BCDs with it Ecess and Hecess
From Excise Law of India the CVDs and Additional Custom Duties are Cenvat
and BCD is added to the material value as in inventorised.
In case of procurement without Acct Assignment Category, the postings od duties are correct acc. to requirement.
But with Account Assigment "A" with Gr-Non Valuated during posting of commercial Invoice all the duties are taken into the material value
with Val-Gr, the postings happen acc to requirement.But during MIGO the Cenvat accounts are not posted.Here the Cenvat clearing accounts needed to be posted.while automatic account determination, system find the posting keys from the schema WRT to the condtion for which the cost is entered and post in the relevant GL
when the account assignment is asset in the P.O it becomes a manual account assignment and all posting happen with transaction key KBS. KBS determines the account based on the GL maintained in the PO.
As far as i know it may not be possible to determine the accrual accounts with manual account assignment. -
Error messge in migo for import procurement
Hi
Gurus
I have two issues related to import procurement
We pass Customs duty first i.e MIRO for a given quantity. then we do GR ( MIGO) with ref to the commercial invoice pop up at migo.
Here i want a check ( a error message) once the quantity of that Invoice no is completed.Please let me know how to do message setting for the same.
Secondly when iam entering the customs value in INR in MIRO, the same amount must flow in MIGO, but instead the value is flowing with exchange rate .What are the settings so that the same or proportianate value entered in MIRO for customs will flow in MIGO.
thanks in advance
Chris>
cnranjith wrote:
> Dear all
>
> When doing MIGO for Import PO excise tab is not appearing for the material
>
> I have maintained all the data in J1ID for the material and plant
>
> already we use to capture EI for the same material and plant but this time this is creating issues
>
> We have posted an inoice of planned delivery costs but no excise tab in MIGO
>
> What might be the reason
First you have to post the Customs MIRO in case of import purchase...then go for MIGO...you will find excise tab will follow....
Regards,
Indranil -
Hi Expert,
I have a requirement like my client needs to take credit availed on CVD (JCV1), ECess on CVD (JECV) and H&SECess on CVD (J1CV) in Import procurement for one Company code. for 1000, however client doesn't want to take credit availed for another company code for 2000 on CVD (JCV1), ECess on CVD (JECV) and H&SECess on CVD (J1CV) and the same value need to added with material cost at the time of MIGO posting after Custom Invoice posting.
Please share your view how can I control this thing through Account key and accurals in pricing procedure else any other control function available for the same.
Thanks in Advance,
SKNYou need to add CVD on material cost for company code 1000 not for 2000.
So you have to maintain the two pricing procedures for 1000 and 2000
should not be maintain any accural/account key for JCV1 for 1000
Remove the account no in Company code settings in CIN -
CONDITIONS FOR IMPORT PROCUREMENT
Hi Experts,
Can anybody explain the following,
1. What are the condition type should be included in import pricing procedure.Also kindly expalin the requirements.
2. For import procurement, when we have to pay the customs,excise,insurance,etc.., and how to capture in Condition types.
Thanks in advance,
Prabuhi
TOTAL IMPORT CONFIGURATION AND CYCLE
in ur pricing u have to create following
JCDB IN: Basic Custom Duty
JCV1 IN : CVD
JECV IN : Ed Cess on CVD
J1CV IN : H&SECess on CVD
JEDB IN : Ed Cess on BCD
JSDB IN : H&SECess on BCD
JADC Additional Duty of Custom
JCV1, JECV, J1CV and JADC will go to Excise MODVAT Accounts and JCDB, JEDB and JSDB will get loaded on inventory.
In M/06, for all above conditions, keep following controls;
Cond. class A (Discount or surcharge) Plus/minus A (Positive)
Calculat.type A (Percentage)
Cond.category B (Delivery costs)
Activate "Currency Conversion" and "Accrual"
now for setoff
maintain the following conditions in excise default settings.
JCV1, JECV, JADC
path: spro>logistic general >tax on goods movements>india >basic settings>determination of excise duty >maintain excise defaults >
along with ur taxprocedure maintain these conditons in the specified fields
JCV1 in CVD condition field.
JECV in ECS conditon field.
JADC in ACD conditon field.
in case of secess on CVD, no need to maintain.
it is hardcodded in the standard
Vendor in GR 2 (Entry always possible)
Import scenario
1.Create material master of import goods.
2. Create vendor master record of import vendor and Customs clearing vendor.
3. Maintain CIN settings.
4. Maintain J1id.
5. Maintain Pricing procedure SAP standard JIMPOR.., maintain required conditions..JCDB,JCV1...
6.Assign the schema to respective import vendor in Purchasing view of VMR.
7. Create import PO ,check in conditions of JCDB, JCV1 the customs clearing vendor(Indian vendor) and percentage is assigned. This can be done by In condition tab select condtion then click on display, then enter.
Save the PO.
8. MIRO --Capture Bill Of Entry.(Commercial Invoice No.,).Customs clearing first .Here CVD will b converted to BED.
9. Capture Excises invoice--j1iex.
10.MIGO.
12.Post Excise Invoice.
13.MIRO...Payment to vendor(import vendor)
ACCOUNTING
Find the fin. Acct, entry generated by system with end of every transaction and Import Business Process.
1. Create PO, in conation tab of PO, maintain all possible Bill of entry components and assigned it with custom vendor.
2. Create MIRO for custom vendor (Planned delivery cost)
FI Entry of Import( Planned Delivery Cost)
1 K 2001000 customs 60,592.36- INR
2 S 2027100 CVD Clearing 336.07INR
3 S 2025000Customs Provision 9,845.38INR
4 S 2025000Customs Provision 985.38INR
5 S 2027100CVD Clearing 33,606.65INR
6 S 2027100CVD Clearing 672.13INR
7 S 2025000Customs Provision 492.69INR
8 S 2025000Customs Provision1 4,654.06 INR
3. Create GR for Excisable /non-excisable mat.
for Material
1 89 4002100 RM: coal 221,365.01 INR
2 96 2021000 Provisional Liab-GR 195,387.50- INR
3 50 2025000 Customs Provision 14,654.06- INR
4 50 2025000 Customs Provision 985.38- INR
5 50 2025000 Customs Provision 492.69- INR
6 50 2025000 Customs Provision 9,845.38- INR
for Excise
1 40 4610410 RG 23A-Higher Ed Ces 336.07 INR V0
2 40 4610100 RG 23A-BED 33,606.65 INR V0
3 40 4610400 RG 23A-Ed Cess 672.13 INR V0
4 50 2027100 CVD Clearing 34,614.85- INR V0
4. Create MIRO for importer liab.
FI for Vendor (Importer)
1 K 2001000 test / 195,387.50- INR
2 S 2021000 Provisional Liab 195,387.50 INR
hopr it help
regards
kunal -
Depot Import Procurement !!
Hi
Depot ( A Trading House) procures material from foreign vendor.
What is the process of depot import procurement?
What should be the FV11 conditions for the material?
What should be the material and chapter ID combination in J1ID?
Tax Procedure used in TAXINN.Hi,
To updated Excise Register we need the source then only you can update RG23D. Lets say you have implimenting Depot in the middle & there are few stock qty where its partially done. So you need to update the register for the whole Quantity. Eg:- 1000 PC are there in which 600 has been sold out remaining 400 PC you need to updated with RG23D. if its the case we need to update the RG23D Register for whole Qty 1000 PC even if the sale is compleated. You can do it in J1IG for Material Document & J1IJ for Billing. for 600 PC so the system will have the full Qty details. Accordingly you can do for the remaining Qty. You can check in the Report J1IDEPOTSTOCK1.
Check this links
Re: How to Upload initial Excise Invoices at Depot
Excise Procedure for Depot Sales and Depot Stock Transfer ?
Report for Depot Excise Invoice
Additional Excise Duty for Depot
Pherasath -
Import procurement configuration ?
hi experts
Apart from pricing , what are the other configuration has to be done for Import procurement scenario?
ThanksHi
IMPORT PROCESS
in ur pricing u have to create following
JCDB IN: Basic Custom Duty
JCV1 IN : CVD
JECV IN : Ed Cess on CVD
J1CV IN : H&SECess on CVD
JEDB IN : Ed Cess on BCD
JSDB IN : H&SECess on BCD
JADC Additional Duty of Custom
JCV1, JECV, J1CV and JADC will go to Excise MODVAT Accounts and JCDB, JEDB and JSDB will get loaded on inventory.
In M/06, for all above conditions, keep following controls;
Cond. class A (Discount or surcharge) Plus/minus A (Positive)
Calculat.type A (Percentage)
Cond.category B (Delivery costs)
Activate "Currency Conversion" and "Accrual"
now for setoff
maintain the following conditions in excise default settings.
JCV1, JECV, JADC
path: spro>logistic general >tax on goods movements>india >basic settings>determination of excise duty >maintain excise defaults >
along with ur taxprocedure maintain these conditons in the specified fields
JCV1 in CVD condition field.
JECV in ECS conditon field.
JADC in ACD conditon field.
in case of secess on CVD, no need to maintain.
it is hardcodded in the standard
Vendor in GR 2 (Entry always possible)
Import scenario
1.Create material master of import goods.
2.Create vendor master record of import vendor and Customs clearing vendor.
3.Maintain CIN settings.
4.Maintain J1id.
5.Maintain Pricing procedure SAP standard JIMPOR..,maintain required conditions..JCDB,JCV1...
6.Assign the schema to respective import vendor in Purchasing view of VMR.
7.Create import PO ,check in conditions of JCDB, JCV1 the customs clearing vendor(Indian vendor) and percentage is assigned..This can be done by In condition tab select condtion then click on display,then enter.
Save the PO.
8.MIRO --Capture Bill Of Entry.(Commercial Invoice No.,).Customs clearing first .Here CVD will b converted to BED.
9.Capture Excisse invoice--j1iex.
10.MIGO.
12.Post Excise Invoice.
13.MIRO...Payment to vendor(import vendor)
check ur process and configuration as above and also make sure ur using appropriate form for the rg23a register (consult ur abaper)
rg23 a 1 J_2IRG23A_PART1
rg23a 2 J_2IRG23A_PART2
pherasath -
IMPORT PROCUREMENT(INDIA)
Hi
Gurus
I have two issues related to import procurement
We pass Customs duty first i.e MIRO for a given quantity. then we do GR ( MIGO) with ref to the commercial invoice pop up at migo.
Here i want a check ( a error message) once the quantity of that Invoice no is completed.Please let me know how to do message setting for the same.
Secondly when iam entering the customs value in INR in MIRO, the same amount must flow in MIGO, but instead the value is flowing with exchange rate .What are the settings so that the same or proportianate value entered in MIRO for customs will flow in MIGO.
thanks in advance
Chrishi
>Here i want a check ( a error message) once the quantity of that Invoice no is completed.Please let >me know how to do message setting for the same.
it is not possible to make chack at that screen
>Secondly when iam entering the customs value in INR in MIRO, the same amount must flow in >MIGO, ?but instead the value is flowing with exchange rate .What are the settings so that the same or >proportianate value entered in MIRO for customs will flow in MIGO.
as ur po is in USD or any other currency it is not possible to make it in inr
regards
kunal -
Excise capturing in Import procurement
Dear friends,
i am having trouble capturing the Part I entries for an import procurement. although the internal no. is generated when i do J1IEX i cannot find any part I tab when i display the document. moreover at the time of part II posting, the system says no part I entry exists for the excise invoice.
please suggest any solution.hi
what process ur following???
better to create EXCISE invoice at MIGo only and post it separately
try doing J1I5 (update part 1) for the GR and then post the exise invoice in j1iex
following is the process to be followed
1.Create material master of import goods.
2. Create vendor master record of import vendor and Customs clearing vendor.
3. Maintain CIN settings.
4. Maintain J1id.
5. Maintain Pricing procedure SAP standard JIMPOR.., maintain required conditions..JCDB, JCV1...
6.Assign the schema to respective import vendor in purchasing view of VMR.
7. Create import PO, check in conditions of JCDB, JCV1 the customs clearing vendor(Indian vendor) and percentage is assigned. This can be done by In condition tab select condtion then click on display, then enter.
Save the PO.
8. MIRO --Capture Bill Of Entry.(Commercial Invoice No.,).Customs clearing first .Here CVD will b converted to BED.
9. Capture Excises invoice
10.MIGO.
12.Post Excise Invoice.
13.MIRO...Payment to vendor(import vendor)
Maybe you are looking for
-
Dear All, I have created notification for customer complaint (Type Q1) through QM01 and save it but while I am going to change the status (QM02) by clicking on "put in process" it is giving status check error "The function you selected can not be car
-
Determining which record has max value
Hi, In my table I have the following cols: Account_Id, Contact_Id, Modified_Date In this case, one contact_id has multiple account_id's but I want to return only 1 account_id per contact, based on the max modified_date for the accounts. Any help with
-
Chart series lines going over each other
All i have a chart with 3 series, how do i get it so that the lines are all separate, at the moment they go over each other and i can't see each of the three, i know that some of the values are the same, and some are near to each other, but how do i
-
I have been deleting all the unnecessary copies of files in the organizer PS8. As of now, they remain in my Photoshop Online library and gallery, but will they also be automatically deleted after i run the backup/sync in the organizer?
-
BT broadband Without the BT providing the landline
Is it even possible anymore. I'm currently about 6 months away from the end of an 18 month contract. The broadband price for me is fine especially with the BT sports in the mix on my current BT infinity 2 package. Though i wish everytime someone near