Invoice block-for a PO with Invoicing plan

Hi Team,
The Invoice is blocked with Price block for a PO with Account assignment category Z (no GR cost centre) and with the Invoicing plan.
the Invoicing plan is a periodic with monthly invoice dates.
for ex: 31.01.09
28.02.09
01.03.09 and so on
but no Invoices were posted for the month of January and two invoices were posted in Feb.
the 1st Invoice is cleared and 2nd is blocked for Price.
please answer these questions.
1) The system should not have blocked the 2nd Invoice of Feb as no Invoice was posted for January?
2)Then if the system is not allowing two invoices in the same month eventhough the earlier month posting is not done.
the earlier month can be posted only with the Past date is it so?
Regards,
Adinath Raykar

Similar Messages

Regarding Tolerance Keys for Invoice Block For Payment in MIRO

Hi all,
In customizing, I have defined Tolerance Keys for Invoice Block for Payment. I have defined all tolerance keys for my company code ...... with Absolute as well as Percentage Limits. But whenever I am doing MIRO & testing for my Block Codes effectiveness, i am finding that everytime my Invoice gets Blocked by Tolerance Key PP(Price Variance) or by date......but not by any other like BD, BW, KW etc. Can anyone help me as how I should check for this. I even tried to study the documentation part available in customizing, but was unable to understand the term like Order Price Quantity units.......Can anyone help me in understanding this thing ........
Regards.....

Hi Ganesh,
below is the user exit where you can check the tolarance and put the Block according to the your requirment.
User Exit name - MM08R002 -User exit for tolerance checks
in the above user exit you have to use the below Function exit.
1) EXIT_SAPLMRMC_001
2) EXIT_SAPLMRMP_001
we implemented the above user exit to put the payment block based on the checks.
You can find the documentation of the above exit in the system.
Thanks
Naresh

Invoice blocked for payment without GRN(MRBR)

Hi all,
I need to have a report which should show the details of invoices blocked for payment and which dont have any GRN means Invoice is generated without GRN and hasbeen blocked because of either of quantity or price difference.
For the same I tried to use MRBR report but it is showing all the invoices blocked but what I need is invoice generated and blocked for payment without having a GRN as base document.

Hi,
You can use ME2L but in MRBR report better use filter and sort documents by blocking reason R1 (Missing GRN), this should solve your purpose.
Hope this helps you. Any point?
Regards
Bharat

Invoice verification for blanket PO with account assignment category U (un

Hi all
While doing miro when i am doing invoice verification for blanket PO with account assignment category U (unknown) system is not allowing me to enter the GL it is disable,wat can be the possible reason
Regards
shailesh

Hi Shailesh,
As you have maintained the account assignment category as U the account assignment tab will not be available. If you want to enter a GL account then use the Account assignments K or F or X.
Else if you want to use U in PO then you can give the GL account and other account assignment details only in the Invoice verification.
Regards,
Kathir

2LIS_06_INV Delta Procssing with invoices blocked for payment

Hi all-
I am using the 2LIS_06_INV data source to determine invoices that are blocked for payment. The required fields I am reporting include SPGRM and SPGRP.
2LIS_06_INV picks up these fields when first blocked with transaction MIRO (setting a qty or price block during posting). However, updates to these fields using MRBR (releasing the qty or price block) are not captured in delta processing (as stated in OSS note 1494379). If the 2LIS_06_INV data source specifically does not handle delta processing of MRBR updates, how does SAP handle the reporting of blocked invoices using this data source?
Thanks!

Perhaps a bit late, but interesting for future reference. I had the same issue and logged this with OSS. The response was that it was a design decision not to include MRBR, MRKO, MR11 and MR11_SHOW in the delta process for 2LIS_06_INV.
This means that you have 2 options :
- Ask SAP to create this new functionality (check note 11)
- Create a new datasource (based on the change management CDHDR and CDPOS table, I would suggest) to ensure the correct status is sent to BW (that is what we are planning to do). This can then be extracted after the 2LIS_06_INV datasource.
Regards,
Freek

Invoice block for PO with down payment

Hi All,
My requirement is to block every invoice created for PO that has down payment.
Is it can be done by standard SAP ?
Thanks.

Hi Srinvas,
Yes, system will prompt me message. But if the user never clear the down payment with the invoice, when I do payment run, the invoice will be selected for payment again.
This will cause me double payment. That's why I need the invoice of PO with down payment to be block.
Is this possible by standard configuration ?

Invoice blocked for qty reason, but condition type deleted from the PO

Hi Gurus,
I have an LIV with R block in the header level. The invoice contains a line item for planned delivery cost condition type FRB1 which was entered manually during PO creation.(no condition record exists for FRB1). But the condition type FRB1 is missing from the PO line item now and when trying to release the invoice block via MRBR, it gives the message that the 'list is incomplete'.
The PO is not having any release strategy and the invoice number is available in the index table RBKP_BLOCKED.
The condition type FRB1 got deleted from the PO on re-triggering the pricing. The business needs the pricing to be carried out on the shipment date from the vendors site. So when the vendor issues the goods, the same is updated in the pricing date field in PO line item and the pricing is re-triggered. So in this case the happenings were in the below sequence.
1. Buyer created PO with manually entered FRB1 condition type.
2. Invoice posted against the PO.
3. When vendor has shipped the goods, the ASN updates the pricing date in the PO and carries out re-pricing. The FRB1 got deleted from the PO on re-pricing as no condition record existed.
4. Goods receipt posted
5. Trying to release the invoice in MRBR, but the system gives the message that the list is incomplete.
Please suggest how to go ahead with the resolution of the issue.
Regards,
Greg

Gregory Mathews wrote:
Hi Gurus,
>
> I have an LIV with R block in the header level. The invoice contains a line item for planned delivery cost condition type FRB1 which was entered manually during PO creation.(no condition record exists for FRB1). But the condition type FRB1 is missing from the PO line item now and when trying to release the invoice block via MRBR, it gives the message that the 'list is incomplete'.
> The PO is not having any release strategy and the invoice number is available in the index table RBKP_BLOCKED.
>
> The condition type FRB1 got deleted from the PO on re-triggering the pricing. The business needs the pricing to be carried out on the shipment date from the vendors site. So when the vendor issues the goods, the same is updated in the pricing date field in PO line item and the pricing is re-triggered. So in this case the happenings were in the below sequence.
>
> 1. Buyer created PO with manually entered FRB1 condition type.
> 2. Invoice posted against the PO.
> 3. When vendor has shipped the goods, the ASN updates the pricing date in the PO and carries out re-pricing. The FRB1 got deleted from the PO on re-pricing as no condition record existed.
> 4. Goods receipt posted
> 5. Trying to release the invoice in MRBR, but the system gives the message that the list is incomplete.
>
> Please suggest how to go ahead with the resolution of the issue.
>
> Regards,
> Greg
Hi Greg,
Are there any a/c entries showing in GR a/c doc for this cond type? I think it could be a bug when you run the ASN Idoc. Try to un-check Delete indicator for FRB1 which would stop it getting deleted.
Regards
Shiva

Downpayment - invoice blocked for FI

Hello SD experts,
I have a problem in downpayment process when the amount of customer's advance payment is bigger than amount on final invoice. For example: customer paid 25.000 in advance, I posted downpayment and then final invoice is issued only for 23.000. So, we can say we should return to customer 2.000.
Here is how we enter documents in SAP:
1. Sales order for downpayment request is created (with billing plan). We put one item (for example service) with price 25.000.
2. Downpayment request (invoice) is created.
3. We post downpayment to FI (25.000).
4. We create final invoice
On final invoice additional item is automatically added by SAP. Additional item is downpayment settlement. By default both items get same price (value), that is 25.000.
As I said, I want to charge customer only 23.000. So, I change the amount for first item from 25.000 to 23.000. As soon as I do this and save the document, it becomes blocked and accounting document is not created.
It can't be released to FI because I get notice about difference between values of two items on invoice.
My question is: Do we have the process correctly set up ? Are we entering documents in the right way ?
Another thing if I look at the printout, I think is ok. I have a line that says that amount to be paid is -2.000 (cusotmer paid more).
In other cases, if received advance is same or smaller then the final amount, there aren't any problems with blocked invoices.
Thank you for help,
RJ

HI CB,
While posting a invoice by MIRO, if you come across the following message as block for payment than it is because of Three way matching. You can see three way matching status in purchase order status tab in transaction code ME23N and in purchase order history in item detail.
Generally invoice is blocked for payment because of two issues:-
u2022 Price difference: - Price in invoice is higher than purchase order (above tolerance limit).
u2022 Quantity difference: - Quantity in MIRO is higher than MIGO (or good receipt).
Once invoice is blocked for payment you need to release it for payment via transaction code MRBR. For next time while posting an invoice through MIRO you should post invoice within tolerance limit.
You can display and change tolerance limit for invoice verification in customizing with help of transaction code OMR6.
Regards,
Anand

Invoice block for Usage Decision in QM

Hi All,
My requirement is any Standard Configuration is there to block the invoice when the material is Waiting for Usage decision. We have a made a control key with invoice block and assigned in Material Master QM view, but the system is not blocking invoice, even the material is still in Quality inspection without any usage decision.
regards
Gibi Philip

Hi ,
Have you checked in MIR4/MRBR , Whether you are getting any indicator below the filed Quality.
Also consider some of the help tips provided by SAP.
"If you only want to pay invoices, when the quality management process has accepted goods or waived a goods receipt inspection, you must ensure that invoices are not entered before goods receipt. You do this by planning GR-based invoice verification for the relevant vendors."
Regards
K.M.Arun

GRN mismatch and invoice blocked for payment

Hi Team,
We have an issue with regards to Invoices not being allocated to the right GRN's. This causes some invoices to be paid without approval, and other invoices that have been approved to be blocked for payment.
According to standard SAP requires the total GRN quantity to match the total invoice quantity in order for the Invoices to be released for payment. Unfortunately many get stuck in a payment cycle and invoices are not released for payment, for example;
We have an order of a quantity of 100
We receive an invoice (qty 10) this is posted
We complete the GRN (qty 10)
This should release for payment but unfortunately just prior to the bacs run and running MRBR to unblock any invoices we post another invoice for a qty of 10.
Now the total GRN and Inv values mismatch and no invoices will be paid.....
The cycle goes on and on and more invoices are blocked for payment, even though some GRN's are completed.
where the GRN value is lower (75) than what has been invoiced (78). In order to rectify this I need to go into each individual invoice, check the delivery note number and match it off against the GRN. When I find an invoice that doesn't match a GRN, in most cases these have taken an incorrect GRN and have been paid. I have to chase for the GRN to be completed or for the invoice to be removed. Once the totals match I then have to pray no more invoices are posted until the BACs run has gone!!
Can we apply a fix to force those invoices that match a GRN be approved for payment even if the total's don't match (so the matches will occur line by line and not from the totals)?
Thanks

Hi,
You can acheive this by setting GR based IV indicator in PO. hence system won't allow to do invoice with out GR. system will ask quntity match between GR and IR. Ultimately no mismatches will occur. So do GR first and next IR by setting this indicator in PO.I hope this will resolve your issue. Thanking you.

Invoice block for payment substitution

Hi,
How to set block for payment indicator for unplanned delivery cost invoice created from MIRO.
Transaction procedure :
- MIRO
- Transaction type = subsequent debit invoice
- Go to tab details
- Enter the unplanned delivery cost
If this document saved, I want to set a payment block in the financial document created.
Can I do this with substitution, if yes, please guide me the step
Thanks,
Melissa

OMR9

Invoice Blocked for Payment in MIRO tcode

Dear All,
After posting the invoice in MIRO, i am getting the message as Invoice posted, Blocked for payment. Where we need to do the settings for this ? In this case again i need to release this doc in MRBR, if i don't want this means, what i need to change ?
regds,
CB

HI CB,
While posting a invoice by MIRO, if you come across the following message as block for payment than it is because of Three way matching. You can see three way matching status in purchase order status tab in transaction code ME23N and in purchase order history in item detail.
Generally invoice is blocked for payment because of two issues:-
u2022 Price difference: - Price in invoice is higher than purchase order (above tolerance limit).
u2022 Quantity difference: - Quantity in MIRO is higher than MIGO (or good receipt).
Once invoice is blocked for payment you need to release it for payment via transaction code MRBR. For next time while posting an invoice through MIRO you should post invoice within tolerance limit.
You can display and change tolerance limit for invoice verification in customizing with help of transaction code OMR6.
Regards,
Anand

Invoice Verification for Capital PO with Vendor (alternate Payee)

Hi all,
I want to do Invoice verification for capital PO where the payment to the vendor A is made by vendor B ( Alternate payer).
I have created new partner role and given Vendor B as Alternate Payer in PO.
PR, PO with Account Assignment category "A". GR done.
My question is : I need to do Invoice Verification.
Option A :verify the Invoice of Vendor A.
Option B : verify in Hardcopy and hand over it to Vendor B for making immediate payment. Since I need to pay Vendor B, I planned to change the name of the vendor in Detail tab as Vendor B. In this way, my payment processing is being done for Vendor B.
Please let me know which option is right. Please suggest if there are other ways of doing this.
Since Vendor B will take the Asset and lease it to me and will make the payment to Vendor A immediately. I want to pay Vendor B in installments.
Due to some technical reasons, I am not able to do MIRO ( It says short dump).
Hence, I am not able to try successfully in Dev server.
regards
Partha

> About your short dump contact your system admin.
>
> About your process if you are leasing the equipment
> then it's better to use service order.
> Other wise what evet you have suggetsed is the
> solution looks to me by looking your esplanation.
Hi Mr.Patel
What is the process that you suggest by Service Order.
Is it possible to explain in detail please for the benefit of the forum and for me.
Partha

Invoiced blocked for sales order (configurable material external procurement )

Hello Expert
Configurable material external procurement
Invoiced blocked because ,"Error reading the material cost estimate for sales order "75501"
Message no. KE292
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate item
000010 of sales order 75501 by reading the corresponding product cost
estimate.
However, no product cost estimate could be found for this sales order
item.
The system accessed product costing for product 10820 using costing
key 002 as defined in the
CO-PA Customizing
settings.
System Response
The system cannot process the document any further.
Procedure
Check your Customizing settings.
Note:We can't run cost estimate and releasing it because it's a configurable material but external procurement. We place a purchse order based on configurable sales orser
Thanks
Parves

Hello Declan,
Thanks for your reply. Could you please give me the steps for Maintain the
sales order cost estimate?
Requirement: Customer service receive order with variant configuration product,
then MRP Crete PeReq, convert PO and
send to supplier .Supplier configure the product and direct delivery to
customer. Supplier sends an invoice to us. Then we send invoice to our customer
Thanks
Parves

Setting up Billing Block for SALE ORDER during Invoice cancellation

Hi,
I have a requirement where in i need to set the billing block(VBAK-FAKSK) while saving Invoice cancellation document. Please suggest some user exit or BADI during Invoice save so that i can set the billing block in sale order header data.
Thanks in Advance,
Raghav
Moderator message: please do your own research before asking.
Edited by: Thomas Zloch on Jan 12, 2011 2:59 PM

Hi,
You can try TCode V.00
This transaction when executed will give you the list of all the sales documents blocked for delivery per sales organization. There are various other criteria which might be useful. This transaction will allow you to edit each sales document.
If this is not the one that you want, then perhaps you might have to develop one.
Thanks
Mukund S

Invoice block-for a PO with Invoicing plan

Similar Messages

Maybe you are looking for