Invoice correction for debit & credit

Dear Experts,
I am doing debit correction with refernece to F2, this is working fine.
But customer has already raised credit correction with reference to F2 & account postings gone wrong it is showing debit to company & credit to customer. To correct this credit note customer want to raise debit notes with reference to G2.
So I am trying to do copy control with reference to G2 system is not allowing to do it is giving error
An invoice correction request must be created with ref. to an invoice.
Could any one guide me to resolve this issue? or how can we handle both credit & debit under invoice correction?
Thanks
Trupti

Never had a similar experience but you can try generating invoice correction request by referencing again the F2 billing reference. The other option is create a debit note directly referencing F2 billing reference
G. Lakshmipathi

Similar Messages

Excise invoice creation for Debit Memo or Credit Memo

Dear All,
I have to create Excise Invoice J1IIN with reference to Debit Memo in Differential Invoice Senario.
When i goto J1IIN it shows Customization for Document is missing in table Billing Reference type.
How to create Excise invoice for Order related billing.Plz solve my problem.
Award Pts for useful answers.
Thx & Regards,
Pankaj

CIN Configuration for Excise Invoices in case of RETURNs
Basically CIN is divided in to two types:
1. TAXINJ - Is a Routine Based that is used in the condition types. it will work on the logic what ever is there in the Routine.
2. TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important points is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity; you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
IndiaMake for Logistics General, by choosing Taxes on Goodsthe settings in Customizing Basic Excise Duties Using Condition Technique and Movements Account Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Maintenance screen, which you can MasterExcise Rate access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.Data
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use: In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax on Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
you have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use sub transaction types, enter the accounts for each sub transaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Logistics General 1. Go to IMG Define Structure ofData ScreenMaterial Master Configuring the Material master Screen Sequence.for each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
Transaction
Action
J1I2
Prepare a sales tax register
J1I3
Create outgoing excise invoices in batches
J1I5
Update the RG 1 and Part I registers
J1IEX
Incoming Excise Invoices (central transaction)
J1IEX_C
Capture an incoming excise invoice (excise clerk)
J1IEX_P
Post an incoming excise invoice (excise supervisor)
J1IF01
Create a subcontracting challan
J1IF11
Change a subcontracting challan
J1IF12
Display a subcontracting challan
J1IF13
Complete, reverse, or recredit a subcontracting challan
J1IFQ
Reconcile quantities for subcontracting challans
J1IFR
List subcontracting challans
J1IH
Make a CENVAT adjustment posting
J1IIN
Create an outgoing excise invoice
J1IJ
Assign excise invoices to a delivery for sales from depots
J1INJV
Adjust withholding tax Item
J1INREP
Reprint a withholding tax certificate for a vendor
J1IQ
Year-End Income Tax Depreciation Report
J1IR
Download register data
J1IS
Process an excise invoice (outgoing) for other movements
J1IU
Process exemption forms
J1IW
Verify and post an incoming excise invoice
J1IX
Create an incoming excise invoice (without reference to purchase order)
J2I8
Transfer excise duty to CENVAT account
J2IU
Remit excise duty fortnightly
J2I9
Monthly CENVAT return
J1IG
Excise invoice entry at depot
J1IGA
Create additional excise entry at depot
J2I5
Extract data for excise registers
J2I6
Print excise registers
rewards if it helps

Invoice correction request -- Debit Memo

Hi,
I am able to create the Debit memo with respective RK(invoice correction request).
But the value in debit memo billing document is negative. So, accounting entry is going with negative value.
Can any body suggeest me whether it is correct process or i need to any settings.
Regar

In invoice correction request doc type is RK and
there will be two line items in Sales order
and 1st line item is the invoiced item and
2nd line item is what you need to enter with material and the quantity
now, the difference between the both will be paid to the customer in Credit memo
and in debit memo customer will pay to the company.
rule 1: you should make sure that the "reference mandatory" field should be
set to Invoice.
hope this will clarify you,
Regards,
Sailesh

Which table where I can find diff between Invoice and subseq deb/ cred

Dears,
Is ther any table from where I can check whether Invoices is created based on
1, Invoice
2. Subsequent debit/Credit.
I could not find the difference in rbkp table. Pls suggest
Regards
Kamesh

Hi,
Invoice Header table: RBKP
Invoice item table: RSEG
and check following link also
[How to identify an invoice/credit memo/ subs credit / subs debit in tables;
Regards
Kailas Ugale

Bapi for Debit/Credit Note data

Hi All,
Can someone help me finding an standard BAPI for getting the Debit/Credit note history of a customer.
Thanks in Advance,
Abhi.......

Raj you can try with these also:
use...
'BAPI_CRED_MEMO_CREATEFROMDAT2'
data: con_cr_memo_bus_obj like BAPIUSW01-OBJTYPE value 'BUS2094'.
CALL FUNCTION 'ZBAPI_CRED_MEMO_CREATEFROMDAT2'
EXPORTING
ORDER_HEADER_IN = bapi_hdr
business_object = con_cr_memo_bus_obj
convert = 'X'
IMPORTING
SALESDOCUMENT = bapi_salesdoc
TABLES
return = bapi_ret_tbl
ORDER_ITEMS_IN = bapi_itm
ORDER_PARTNERS = bapi_prtnr
ORDER_ITEMS_inx = bapi_itm_out
order_schedules_in = bapi_schd_lin
order_text = bapi_text.
AND in the cloned ZBAPI above in SE37/80, add this Importing parameter: BUSINESS_OBJECT LIKE BAPIUSW01-OBJTYPE
Please have a look in older topics:
<a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="95866"></a>
<a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="82006"></a>
Also:
Did you try BAPI_INCOMING_INVOICE_CREATE with DOC_TYPE (CREDIT MEMO) field in BAPI_INCINV_CREATE_HEADER.
Amit.

Data extraction for debit/credit indicator A & L

Hello,
In ECC there are certain records agains which Debit/Credit Indicators
are A & L...How can we pull them into BW???
Also we are getting Amount againt those records in BW but not Quantity..
Thanks & Regards
Shilpi Gupta

Hi Shilpi,
Check your transformation / Transfer rules for quantity.
if quanity is not mapped map quantity field from data source to your bw target field.
hope this will help you.
Thanks,
Vijay.

Seperate posting line for debit / credit

Hi,
I would like to see a separate posting line debit/credit at the time of GR for one freight account
I created separate accrual and accounting key with separate debit /credit posting rule
But the credit entry is going properly and debit entry is going to Price difference account because my maerial
is priced at standard price
I want system to create debit entry separately to the debit account and credit to separate account as
mentioned in the accounting key in obyc
what would be the option?
Thanks in advance
BR
Diwakar

Hi
Goto OBYC
Go to Price Diffrence Transaction key
Select Rules Button
Select Debit/Credit check box
Then enter your accounts for Debit and Credit
Cheers
Srinivas

Bapi for debit/credit memo creation

Dear all,
I am using the BAPI_SALESORDER_CREATEFROMDAT2 for creating a credit/debit memo, the following error is displayed.
"Unpermitted Combination of Business object BUS2032 & Sales Doc Category type K"
Could you please provide me a solution and let me know if there are any BAPIs to create credit/debit memos.
Thanks in Advance.
Regards,
Raj

Raj you can try with these also:
use...
'BAPI_CRED_MEMO_CREATEFROMDAT2'
data: con_cr_memo_bus_obj like BAPIUSW01-OBJTYPE value 'BUS2094'.
CALL FUNCTION 'ZBAPI_CRED_MEMO_CREATEFROMDAT2'
EXPORTING
ORDER_HEADER_IN = bapi_hdr
business_object = con_cr_memo_bus_obj
convert = 'X'
IMPORTING
SALESDOCUMENT = bapi_salesdoc
TABLES
return = bapi_ret_tbl
ORDER_ITEMS_IN = bapi_itm
ORDER_PARTNERS = bapi_prtnr
ORDER_ITEMS_inx = bapi_itm_out
order_schedules_in = bapi_schd_lin
order_text = bapi_text.
AND in the cloned ZBAPI above in SE37/80, add this Importing parameter: BUSINESS_OBJECT LIKE BAPIUSW01-OBJTYPE
Please have a look in older topics:
<a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="95866"></a>
<a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="82006"></a>
Also:
Did you try BAPI_INCOMING_INVOICE_CREATE with DOC_TYPE (CREDIT MEMO) field in BAPI_INCINV_CREATE_HEADER.
Amit.

Why are S / H used for Debit / Credit indicators?

I am new to SAP and am curious as to what the S and H indicators actually stand for, probably in German? Being American, I am accustomed to D=Debit, C=Credit, which is easy to remember. If I could associate a word with each of the letters S and H, it would make it easier for me to remember which is which. Even if the words were German, that would be very helpful.
Thank you,
Geordon

i always remember them by the fact that they are alphabetically common
H - Credit
S - Debit
H - Haben (Having/Owning?)
S - Soll (Against?)
Help me Julius
Edited by: Clinton Jones on Feb 3, 2012 7:20 PM

Report for Subsequent credit or Debit memo

Hi All,
Can you please let us know if we have an report - from which we could run to identify the subsequent debits/ credits posted against POs.
Regards,
Karthick

Hi,
   As of my knowledge, there is no standard report which will fulfill your requirement. You may create an SQVI / SQ02 query using EKBE table.
   EKBE-VGABE can differentiate whether its a normal invoice or subsequent debit/credit. If EKBE-VGABE = 3, then its subsequent debit / credit and if EKBE-VGABE = 2, then its normal invoice.
   You may use the field in the selection screen of the query / ABAP report and fill the value (as 3) manually while executing the report or hard code in the ABAP report or save as default variant for the query report.
Regards,
AKPT

Debit/Credit Indicator for Transaction 'FRL'

Dear all,
In subcontract flow, I would like to separate account determination (split from Return flow) for Debit/Credit in Transaction 'FRL' External activity.
But it is not possible in SAP setting that status of 'Debit/Credit indicator is "Not changeable".
Please help to advice.
Thanks.

I did solve the problem by directly changed value in table T030.
Please let me know if you have better solution. Thanks.

Creating Invoice Correction Requests

Dear experts:
I create a Invoice Correction Requests reference to a billing document.This document only contains one item.
But my Invoice Correction Request contains two items,the invoice Correction Request contain repeated items from the reference billing document.
How does it happened?
Can anybody give me some advice?
TKS!

Dear Stephen
It is a standard feature. The system calculates the difference between the amount that was originally calculated and the corrected amount for each item.
Once it has been approved, you can remove the block. The system creates a credit memo with reference to the invoice correction request. If the remaining amount is positive, the total value does not have a + sign, if the remaining amount is negative, the total value has a u2013 sign.
Two items are automatically created for each item from the invoice, to be copied for the invoice correction request:
- First: Credit item
- Second: Debit item
thanks
G. Lakshmipathi

Debit,credit ,opening balance,closing balance..doubt.

Dear friends,
               I am working in FI report (vendor balance for date ranges) .Its a ALV report. I want to fetch the datas for debit ,
credit,opening balance,closing balance,for the paticular vendor or all vendors for date ranges.the table for this iam using is BSIK AND LFC1.
all the datas stored in the table is for month wise,but my programe (my user needs even for day wise) how to calculate this,
or is there any function modules avaliable or can u konw any other table storing day wise balances...this report is urgent ..
any one pls suggest me .advance thanks..
regards
veera

if user wants day wise then make use of BSAK+BSIK, here u will get all line items daywise , i mean to say Posting daywise.
BUDAT        31.03.2003---->posting date
BLDAT        31.03.2003
CPUDT        31.03.2003
WAERS        INR
XBLNR        T&E-29-30.3-PNPT
BLART        PA
MONAT        3
BSCHL        31
ZUMSK
SHKZG        H------------>D/C
GSBER--------------------->Business Area
MWSKZ-------------------->tax Code.
DMBTR        1,507.00
WRBTR        1,507.00
regards
Prabhu

COPA Values in the Profitability analysis for a credit memo request

Hi All,
When I am trying to create an Invoice document for a Credit Memo request having a Configurable material , in the accounting document profitable analysis Profit Center view fields are not getting updated.
If we do the same thing for a reference material profit center view fields are getting updated properly.
What is the problem with the Configurable material.
Thanks in advance,
RajaMahi

I would start fresh with a new sales order. When you create with reference both the return delivery and credit memo are created with reference to the return sales order. Here is an example document flow to clarify:
Document                                      Date               Qty/value   UoM/Cur   Overall proc. status
                                                                                Return 60000077 / 10                          08/25/05               10.000 EA      Completed
. Returns Delivery 500000016 / 10             08/25/05               10.000 EA      Completed
.. GD returns QI 4900030060 / 1               08/25/05               10.000 EA      complete
.. Credit for Returns1 10000017 / 10          08/25/05               10.000 EA      Completed
... Accounting document 10000017              08/25/05               10.000 EA      Cleared

Allow manual price entry in Debit/Credit memo request but not in STD Order

The same pricing procedure is used for Standard order and Debit/Credit say ZRVA01.
All condition types in ZRVA01 is set to "D" - not possible to process manually in V/06 since business requirement is not allow for manual pricing in sales order creation.
When the Debit/Credit note is created(despite of create w/ or w/o reference to billing document), we need to have the user be able to overwrite the price value, able to delete condition type Surcharge, Discount since in some cases for the credit note, the original price might be too high and we only need to credit the customer for the wrong price.
Question is how to allow 'no limitation' (change with can be made, field Manaual entries in V/06) for all condtion types in pricing procedure but only for Debit/Credit memo request ?

Thank you all, but if I create new condition to allow manual, how could I overwrite or delete some non relevant condition type in credit note
i.e. in STD order we have ZPR0 (base price), ZD01(discount), ZS01(surcharge) and we found out that the ZPR0 and ZS01 was over charged, hence, we need to issue the Credit note to the customer, when create a credit memo request, the user will be able to change the value in ZPR0 and ZS01 and be able to delete ZD01 (as it is non relevant for credit note). How such the new condition type would applied?

Invoice correction for debit & credit

Similar Messages

Maybe you are looking for